Select decimal between numbers and replace with comma - style Grep

Similar Questions

• is there a difference between 38 and 42mm with their pixel density?

  is there a difference between 38 and 42mm with their pixel density? the 38mm and 42mm watches have same interns?

  You can see the technical details of the Apple Watch here. Apple - Support - technical specifications

• With this new firefox updated. The (enter private browsing) is gone and replaced with (new private window). It is sort of back enter private browsing?

  With this new firefox updated. The (enter private browsing) is gone and replaced with (new private window). It is sort of back enter private browsing?

  You can drag links to the private browsing window (hover the icon on the task bar for this update of the Firefox window).
  
  If you drop the link on an empty space on the tab bar, then the link should open in a new tab.

• I removed Vista Home Premium OEM and replaced with Windows Xp

  HP Pavilion dv6609wm Entertainment Notebook PC with windows vista premium 32 bit SDO. I removed Vista and replaced with xp now I lack of recovery of pilots then tried with the disk that I did and I get bootmgr error. What can I do to fix this? Ran, diagnostics etc tried f11 nothing works. robotsad:

  Hello:

  Reload XP and then read that XP downgrade guide below for more information on installing the drivers.

  Please read the section titled moderate model that is where your laptop falls into the area to try to install XP.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/General-XP-downgrade-Guide-for-HP-laptops/TD-p/83267

  Paul

• HP Envy M4: Just changed the HARD drive (failed) and replaced with SDDS, having problems loading OS System.

  SO as I said, my HARD drive wasn't so I went and replaced by a DDI, I did not have any recovery disk or anything, because I didn't need anything off the old HARD drive (I had an external which had all my videos and photos) now my only question is how can I load my old windows 8 OS and then upgrade to windows 10.

  any advice or assistance would be greatly appreciated.

  Thank you

  Alex

  Hello

  Please follow the instructions below:

  http://support.HP.com/us-en/document/bph07143

  Kind regards.

• Diference between consolidation and consolidate with data

  I would like to get said about the differences between the "Consolidate" and option "Consolidate all" in HFM while performing a grouping.

  Please see next post

  Difference between "Consolidate" and "consolidate all"in HFM.

  Varun

• BlackBerry Smartphones difference between EDGE and 3G with a BB symbol next to him? When do they appear?

  Hello

  I am new user of BB 9360. I activated a BIS plan. Now when I turn on 3G optional Mobile 3 G network on top with a BB symbol next to him get but when I turn on 2 G instead of 3 G Mobile network I get written EDGE the high right referring to the page.

  So, that means?

  Again, I am able to properly set up my e-mail account and getting the push-mail service but the App World, Facebook App BBM works not despite a BIS plan that supports the foregoing.

  Please give a solution.

  Hello and welcome to the community!

  sanjoyshaw wrote:

  I am new user of BB 9360. I activated a BIS plan. Now when I turn on 3G optional Mobile 3 G network on top with a BB symbol next to him get but when I turn on 2 G instead of 3 G Mobile network I get written EDGE the high right referring to the page.

  So, that means?

  KB02334 Indicators of State of network of networks GSM/GPRS/EDGE / 3G / 4G

  sanjoyshaw wrote:

  Again, I am able to properly set up my e-mail account and getting the push-mail service but the App World, Facebook App BBM works not despite a BIS plan that supports the foregoing.

  With a strong carrier network (for example, not WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... ( Please wait for this before moving on to the next step) :

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  (3) restart to take batt

  • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you should contact your mobile provider for formal support.

  Good luck!

• Regular expression find and replace with wildcards

  Hello!

  For the world of me, I can't understand the right way to do it.

  I made a list of family names, first names. I want to have a different style than the first name, last name.

  So that's what I have now:

  < b > AAGAARD, TODD, s. < /b > < br >
  AAMOT, KARI, < b > < /b > < br >
  < b > AARON, MARJORIE, c. < /b > < br >

  and that's what I have:

  < span class = "Name" > AAGAARD </span > < span class = "FirstName" >, TODD, s. </span > < br / >

  < span class = "Name" > AAMOT </span > < span class = "FirstName" >, KARI, </span > < br / >

  < span class = "Name" > AARON </span > < span class = "FirstName" >, MARJORIE, C. </span > < br / >

  Any ideas?

  Thank you!

  Make a backup first.

  In the use of the search box:

  (\w+),\s+([^<]+)<\/b>\s*
  
  

  In the field using replace:

  $1 $2
  
  

  Select use regular expression. Light blue paper touch, then click on replace all.

• delete "Desktop Search" and replace with the original Windows search utility

  Under XP, (files and folders) Windows search has been replaced by "Desktop Search", which doesn't help.  How can I get the search utility original back?

  You can't do that.  There may be 3rd party applications that will do something similar.

  The search in XP has also been replaced in win 7 and win 8.

• VMDK file between windows and ESXi with VMFS on iSCSI copy

  Hi all!  I searched here and that you find that no good answer but then I hope that someone can help you.

  We have a group of 3 servers ESXi running off a single iSCSI target and often need to copy VM from the VMFS file system.

  To help the conversion tool is incredibly slow, it's on.  WinSCP and FastSCP work at about 5 MB and 3 MB/sec.  FTP is the best option so far, but it is only 8 MB/sec.  When we have to copy around a virtual machine that takes a lot of time of 20 GB.  In addition, when we make 15 copies of a VM is incredibly long.

  I hoped to be able to directly connect to the iSCSI target and mount the system files somehow, but can't seem to find a way to do it.  Defect is there any method better or faster?  Perhaps a better FTP server than the option of proftpd?

  We hoped a local copy with either USB or eSATA method, but doesn't seem to work.  USB is not detected even and I can not get a non-VMFS file system to mount via eSATA.

  If it works better we can set up a linux machine to mount iSCSI target if copies of file can work this way.

  Thanks for the tips!

  NFS?

• using first pro and replace with after effects composition

  Hi I am using pro CS4 first.

  I created a sequence of camera multi 2 cameras, on a separate strain. When I'm going to replace the images of timeline with an effect after composition, after effects starts, but what I get is the film in after effects is the exact duration camera.

  What can I do to prevent the exact footage of each of the cameras on the time line

  Thank you

  Rodney

  I don't think it's at all possible. It may be a limitation on multicam works. Because it does not really separating clips, there is no way for AE determine who is actually used currently. I guess, you would insert the relevant extract as a separate sequence to get this working...

  Mylenium

• The extract number and String and replace with space

  Hello
  
  I need to extract number and string of a data table. I use Oracle 8i
  
  For example: 001FI025A, 001PDIT002, 001UXSV029AA
  I want to separate as follows
  001 025 A FI
  
  001 002 RESULTED
  
  USXV 029 A 001
  
  
  How can I achieve this? Any help is very useful.
  
  Thank you

  Hello

  Welcome to the forum!

  You must change "001FI025A" to the name of the column. Example:

  SELECT '001FI025A',
         SUBSTR(TRANSLATE('001FI025A',
                          '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ',
                          '0123456789                          '),
                1,
                INSTR(TRANSLATE('001FI025A',
                                '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ',
                                '0123456789                          '),
                      ' ')) AS ELEMENT_1,
         SUBSTR(LTRIM(TRANSLATE('001FI025A',
                                '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ',
                                '          ABCDEFGHIJKLMNOPQRSTUVWXYZ')),
                1,
                INSTR(LTRIM(TRANSLATE('001FI025A',
                                      '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ',
                                      '          ABCDEFGHIJKLMNOPQRSTUVWXYZ')),
                      ' ')) AS ELEMENT_2,
         LTRIM(SUBSTR(TRANSLATE('001FI025A',
                                '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ',
                                '0123456789                          '),
                      INSTR(TRANSLATE('001FI025A',
                                      '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ',
                                      '0123456789                          '),
                            ' '))) AS ELEMENT_3,
         LTRIM(SUBSTR(LTRIM(TRANSLATE('001FI025A',
                                '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ',
                                '          ABCDEFGHIJKLMNOPQRSTUVWXYZ')),
                INSTR(LTRIM(TRANSLATE('001FI025A',
                                      '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ',
                                      '          ABCDEFGHIJKLMNOPQRSTUVWXYZ')),
                      ' '))) AS ELEMENT_4
    FROM DUAL;
  

  Kind regards

• HP 19-2114: how replace the Outlook E-mail address link at the office and replace with the address of the Gmail account

  At the level of the Office can right click to send email. However, my daughter has set up this PC and entered my Gmail email address in the configuration of the original computer. This overlaps only very little, but it is important in some cases. Therefore, I would appreciate to be able to solve this problem.

  If I can also ask for advice to update and/or hardware on sucessfully install Adobe Flash Player to work it would be greatly appreciated.

  Thanks in advance for your consideration in response to the foregoing.

  Best,

  SweetFacz75

  Hello

  Please try the following:

  http://www.groovypost.com/HOWTO/change-Windows-8-default-email-client/

  Kind regards.

• Difference between device and Simulator with respect to the entry of "consuming" with GUI.

  I have a built simple GUI that seems to work as I expect on the Simulator, but on the device whenever I press on enter a ButtonField, at the same time that the execution of the code in the FieldChangeListener attached to this button, I get a little menu in the middle of the screen which has only one entry, «Full Menu» I have to press ESC after the other key press to make this go away. I had a quick glance to see if there is something I should do to indicate that managers of button "consume" entry, it seems that this could be due to the underlying class screen receiving the entry as well, but since the fieldChanged method I implemented returns no that I see not where I should indicate this. I don't get this behavior in the Simulator.

  Can someone tell me how to avoid this effect? Thank you!

  Add the ButtonField.CONSUME_CLICK style when you create your ButtonField and must consume the click, preventing the menu that appears.

• [JS CS5] difference between CS3 and 5 with paragraph.contents?

  It drives me crazy. I'm updating of scripts which ran well in CS3 so that they work in CS5. I ran into a strange (for me) behavior.

  After running the following in CS4:

  var myParagraph = myStory.paragraphs.item (myParagraphCounter);

  myParagraph.contents = "< LI >" + myParagraph.contents

  myParagraph.contents returns 'paragraph < LI > the text of the original.

  But after running the same lines in CS5:

  myParagraph.contents returns only "the text of the original paragraph.

  What happens here? This seems to be a real thing base... According to me, only missing me something obvious.

  I don't know, but as it's the replacement content is dangerous.

  I would do something like this:

  "myParagraph.insertionPoints [0] = .silence"

• ";

  It works as expected?

  Substances