Selection of unstable blue within the QNX components

Similar Questions

• Using skins rather than using the new components

  Hello

  I have briefly spoken on BlackBerry Playbook workshop at LeWeb 10 with the presenter and thought I'd share it here as well.

  Most of the QNX components already exist in the 4.5 Flex / AIR SDK 2.5 framework (button, checkbox, list, StageWebView,...), but they exist in QNX specific packages so that they are "tactile."

  I believe that BlackBerry created a few new components "tactile" because the Flex Framework was not yet ready, but now with Flex 4.5, there these prepared components for mobile.

  Create BlackBerry applications using components from QNX records is easy, but if you really want to develop for multiple platforms, it would be preferable to use skins rather than new components. Skins such as the display of the box could be easily SDK BB so that there is no need to change all the 'new' instructions (or the need to create several plants) but simply to define it in a CSS or Flex theme. In this way the exact same application can be on Android and BB without having to redefine each instantiation.

  I hope the SDK already thought about this team and will provide these theme / Skins

  Fabien

  Theme skins playBook is available here in the .png format:

  http://www.BlackBerry.com/developers/docs/airapi/1.0.0/skins-detail.html

• Most of the fonts Typekit and WebFonts (Wf) not selectable from within the Muse?

  Hey! Seems to be a bug with fonts of the Muse?

  When I go to select some fonts (Typekit and Webfonts), they are not yet selectable from within the Muse. Even a font that I just downloaded in the "Add web fonts" menu does not work...

  Here is a screencast to show you what I mean (I'm clicking on each policy as you see me go down the list in order):

  http://screencast.com/t/pGxQEMd7FQd

  What is happening and what is the reference for this?

  Thanks for any help!

  Please see here:

  https://forums.Adobe.com/thread/1691738

  Thank you

  Sanjit

• Basic function ideas - choose the length to export / scene duplicate / easy to select all the performance to delete within the scene

  While using character animation I just had some ideas for features which can improve the user experience, I'm sure that you already have some of them in the works, and maybe some are already here, but just in case where they are here:

  -When you export a scene be able to choose the start and end of the scene you want to export via a dialog similar to how it works with premiere pro. For now, it seems that you can export the entire scene. (You can always change the length of the scene within the editing area of scene or adjust performance thereafter, but it can reduce render times)

  -The ability to reproduce a scene by clicking right (like how you can duplicate layers in other adobe products) - this would make it easy to copy all the parameters of a scene as head, eyes gaze tilit force ect.

  -Save the project under function

  -Possibility to make animation in a button earrings (just say I put a folder name to walk sequence (1!) in photoshop, it would be cool if when I press 1 keypad it rotate between images in the folder, then I could make the character walk or other functions (you can then position tween character after going in sequels) also have the ability to set framework inbetween calendar change) (I saw a feature like this in the timeline of photoshops when working with animations)

  It is a great program with an extreme amount of potential for the animation industry!

  -Choose the length of time of the beginning and the end of the scene

  Yes. No doubt necessary. The AE and PR have workspace toolbar and I think this is the direction that we are heading towards as well.

  -The ability to reproduce a scene by clicking right (like how you can duplicate layers in other adobe products) - this would make it easy to copy all the parameters of a scene as head, eyes gaze tilit force ect.

  I think already works, but it's Ctrl + D / CMD + D. I'll add a feature here request lift menus contextual and running for operations like this.

  -Save the project under function

  CH is a very interesting model, which is quite a bit different from the apps we all know and love. On the positive side, you can keep your history of any cancellation, even after the abandonment of the app. We * definitely * need a way to save revisions, but we will probably in the form of 'snapshots' who live within your project. For now, you can duplicate your project folder, but we recognize that this isn't a good solution in the long run (or even in the medium term).

  -Possibility to do loops run within a key

  Yay. We can do it. Look at our ' cycle layers ' and behaviors "keyboard triggers. Together, they are very powerful. The 'examples' project posted in the forum has examples of this work.

  -It is a great program with an extreme amount of potential for the animation industry!

  Thank you! We are very excited about it. We know we have a long way to go, but we will improve the application of every day.

• Align layers to the selection within the artboard does not not in 20151114.r.301 x 64

  A very annoying bug has been introduced since the last update:

  If you perform the following steps in a work plan

  (1) make a selection

  (2) select a layer in the layers panel

  (3) layer > align layers to selection > (al six options)

  The layer is not aligned to the selection, but to the artboard instead! Is anyone have a work around?

  By aligning the selection is essential for the harmonization of layers in a drawing or model. I hope that Adobe will solve this ASAP!

  

  This is a bug.

  It's a side effect of change where we allowed layers be aligned with work plans parent; We does not check for an existing selection mask before allowing the artboard to be a widening of the entire alignment.

  Fix is in preparation. Can't comment on the ETA for you, unfortunately. Just know that it is in the pipeline.

  My apologies for the inconvenience.

• select statement nested within the xmlattribute?

  Not sure I can do this, I want to make selects nested so that I can draw from different tables in each element. 2 tables are not attached somehow. I know it would not make sense, but I need to do this.
  
  

  create table "TEST_TBL1" (
    "T1" VARCHAR2(20 BYTE)
    )
   
     create table "TEST_TBL2" (
    "T2" VARCHAR2(20 BYTE)
    )
    
   
    
    INSERT INTO TEST_TBL1 (T1) VALUES ('ABC');
    INSERT INTO TEST_TBL2 (T2) VALUES ('DEF');
    
    
    --SELECT * FROM TEST_TBL1
    --SELECT * FROM TEST_TBL1
    
    
    select
    xmlelement ("TBL1",xmlattributes('name' as "name"),
    xmlagg(
    xmlelement("TBL_1",
    xmlattributes(T1)
    )))
  
  /* how can i add this section in  ? its a different table
    ,xmlelement ("TBL2",xmlattributes('name2' as "name"),
    xmlagg(
    xmlelement("TBL_2",
    xmlattributes(T2)
    )))
    */
    from TEST_TBL1

  Maybe like this? but it does not work
  
  Select
  XmlElement ("TBL1", xmlattributes ("name", ' name'),)
  XMLAGG)
  XmlElement ("TBL_1",
  XmlAttributes (select test_tbl1 t1)
  )))
  
  
  , xmlelement ("TBL2", xmlattributes ("' name2 ' as" Name2 "'),)
  XMLAGG)
  XmlElement ("TBL_2",
  XmlAttributes (select t2 in test_tbl2)
  )))
  */
  of the double
  
  
  
  Thanks for any help

  Maybe because im using 10g?

  Yes.
  Although XMLSerialize is available in point 10.2, opting out is not.

  I just used the print function of the result, you can remove it.

• Can we use the select within the FI... ?

  DECLARE
  A NUMBER;
  BEGIN
  
  IF (SELECT "2" DOUBLE) = 2 THEN
  A: = 2;
  END IF;
  DBMS_OUTPUT. PUT_LINE (A);
  END;

  Have you tried to run it. The error itself is an explanation

  ORA-06550: line 5, column 5:
  PLS-00103: Encountered the symbol "SELECT" when expecting one of the following:
  ( - + case mod new not null 
   
  continue avg count current exists max min prior sql stddev
  sum variance execute forall merge time timestamp interval
  date 
    pipe
  
  No, we cannot
  You can have expressions in an IF statement, but not a query. Instead, you can capture in a variable and then compare yew
  
  declare
  a number;
  begin
  select 2 into a from dual;
  if a = 2 then
  dbms_output.put_line(1);
  end if;
  end;
  /
  		   

• Difficulty playing FLV in the Media components

  I use Flash MX Professional 2004
  I use Camtasia and Flash video exporter to convert AVI to FLV video
  I struggled to get the component MediaPlayback to play my FLV files. It is supposed to be easy and the instructions seem simple, but it does not work normally. That one of my FLV files will play. However that you will play only if I use a relative URL in the components Inspector. Absolutions URLS do not work. I created 6 files from this one and not play any if the URL is relative or absolute. What is the secret? What knids of things in FLV format conversion would cause it to not play? Y at - it something I have to do in Flash to make the component compatible with FLV files. That I have to work just looks dumb luck. Help, please...

  I solved my problem. The solution was a combination of two things. First of all, I use Windows Server 2003 and IIS 6.0. Appearantly IIS 6.0 needs a little help for good stream Flash video. The solution is:

  1. On the Windows 2003 server, open Internet Information Services Manager.
  2. Expand the server to the Local computer.
  3. Right click on the server to the local computer, and then select Properties.
  4. Select the MIME Types tab.
  5. Click on the new... and enter the following information:
     • Associated Extension:. FLV
     • MIME Type box: flv-application/octet-stream
  6. Click Ok.
  7. Restart the World Wide Web publishing service.

  This solution was found here http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19439
  The second problem was that the video would not play when I tested it in Flash MX 2004. I found that once the film was released, I could then test it with success within the Flash.

• Structure of the event within the structure of the case run once

  Hi all

  I am a controller using myRIO and labview where the program compares a value of the probe in a "Preset" and then choose a structure case depending on what type of air supply is required. What can be seen on the picture, for example, is 0 if saturated air supply is necessary.

  The structure of the event is used to send a signal to step to the stepper motors to open the valves (closing is still pretty much in the same way). In any case, the event turns my valves 90 degrees. I read the sensor all a second, however, when the case remains unchanged, the case runs the event again causing my engines running at 90 degrees per second (essentially continuously). What I'm looking for is a way to send the signal to step only once until a new case is selected.

  He is not on the photo, but this is all within the large loop.

  Apologies for any bad/cringeworthy coding, it is literally my first program always using labview. I can post the full VI if you need.

  Any ideas would be very appreciated! Thank you

  Simos wrote:

  crossrulz you have a simple example by chance that uses the feedback node?

  See if that helps

  

• Pro-grammatically discover remote devices (cRIO or sbRIO) within the Local network

  Hi I'm developing an application where I need to configure my cRIOs. So first of all, I need to find out all the RIO within the network and configure one by one by selecting their IP address in the list.

  What someone has to know everything how to discover. I think there must be a solution that MAX discover any type of remote devices.

  Help, please.

  You specify the version of LabVIEW you use. In LabVIEW 2009, you can use the RT to target information VI for a list of all targets of RT on your local subnet.

  

• Does anyone has installed W7 32 bit system opus on a virtual pc running within the professional game in W7 64-bit system?

  Original title: virtual machine that is running W7

  Does anyone has installed W7 32-bit of the system op on a virtual machine running within the professional game in W7 64-bit system?

  I am running XP pro on a virtual pc within the professional game in W7 64 bit system but it became unstable and I need to re - install but thought I would ask this question first.

  Anyone think that this can/cannot be done?

  Yes, 32-bit Windows operating systems can be installed on a virtual machine, even when the host running a 64-bit installation. Also it is not no specific limitation on versions of Windows, guests can run more recent or the same o/s.

• Where can I find a visualization of all QNX components?

  Hello

  It's been a while since I downloaded all the stuff on the development for the PlayBook and the design guidelines and so forth. But I'm still missing a leaf or a pdf that shows all QNX components and what they do. Does something like this exist?

  Thank you!

  lrrm

  This list is not complete, but this could be a very good starting point:

  http://docs.BlackBerry.com/en/developers/deliverables/23959/Choosing_a_button_for_your_application_1...

  Also check out the other entries in the menu.

• Using ListView with ArrayDataModel displays only the first element in each QVariantMap within the matrix

  I have this QML who have a ListView with datasource to a full ArrayDataModel from the CPP file for creationcompleted, I loop in the table to add the hour together to appear as a label on the page, what works. However, when I want to view these items in the list, it will display only the first element of the QVariantMap within the table, no error on the log of the device. Also, triggered more does not work, but when I click it, it will have a blue border surrounding it, but the onTriggered does not fire.

  Here is an excerpt of the CPP on the table fill

  This-> eventsModel = new ArrayDataModel();

  QVariantMap event;

  event ['EventName'] = "Event1";

  event ["EventHour"] = "00";

  event ["EventMinute"] = "01";

  event ["EventSecond"] = '02 ";

  QML-> setContextProperty ("eventsModel", it-> eventsModel);

  Here's the QML

  {Of container

  ID: eventListContainer

  {To ListView

  ID: eventList

  dataModel: eventsModel

  Use a ListItemComponent to customize the appearance of the list view

  listItemComponents:]

  {ListItemComponent}

  type: 'point '.

  {StandardListItem}

  Title: 'Event' + ListItemData.EventName;

  Description: "time:" + ListItemData.EventHour + ":" + ListItemData.EventMinute + ":" + ListItemData.EventSecond; "»

  }

  }

  ]

  onTriggered: {}

  var selectedEvent = dataModel.data (row);

  var eventDetailPage = eventDetailDefinition.createObject ();

  eventDetailPage.txtEventName.text = selectedEvent ['EventName'];

  eventDetailPage.pickEventTime.value = picker.dateFromTime(selectedEvent["EventHour"]+":"+selectedEvent["EventMinute"]+":"+selectedEvent["EventSecond"]);

  eventDetailPage.open ();

  }

  }

  Any help would be appreciated.

  Thank you.

  ListView determines ItemType of the element by calling the function itemType of the dataModel. By default, an ArrayDataModel returns an empty string for this call (see https://developer.blackberry.com/cascades/reference/bb__cascades__arraydatamodel.html).

  This leaves you with a few options:

  (1) If you have no header and all the elements are the same, you can make

  ListItemComponent {
       type: ""
       ...
  

  (2) If you have headers or different elements, you can extend ArrayDataModel and implement your own function of itemType

  (3) you can define a function of ItemType on your ListView in QML. Documentation:

  ListView called DataModel::itemType() for each item in order to know the type. QML, this can be overridden by declaring the itemType function (data, row) on the ListView element. ListView then call this function instead of the function DataModel.

  Here's how to create a list in QML which creates a header for all items on the high level and aStandardListItem for each item below the top level:

• DB within the R12.2 upgrade upgrade

  Hi all

  We are in the process of upgrading R12.1.3 with 11.2.0.4, R12.2.5 database with 12.1.0.2 Applications database. I'm a little confused about the process to upgrade the database as part of the upgrade to 12.2.

  In accordance with the note "guidelines preparation of database for an E-Business Suite Release 12.2 Upgrade (Doc ID 1349240.1)", I'm reviewing step 2

  Upgrading to the last group of patches (conditional) database
  Customers currently on 11.2.0.3 or 12.1.0.1 must now move to the 11.2.0.4 or 12.1.0.2 within the upgrade 12.2 following the documented process in the appropriate Interoperability Notes (see the References section below). It is highly recommended clients on previous patchsets to the upgrade database to the last.
  
  Complete all steps in interoperability Notes except the following:

  • Check the versions of the software
    • R12 to 12.1.0.2 upgrades (12 c) must apply the 16289505 patch and patch 8796558interoperability *.
    • 11i upgrades to 12.1.0.2 (12 c) must apply the patch of interoperability 16289505 as well as other pre-required patches listed in the 11i Interoperability Notes (My Oracle Support Knowledge Document 1524399.1in the References section below) *.
  • Step 'Run patch post-installation instructions' under 'Database Upgrade' in Section 1
  • Apply patch ECX post-implementation level (in the Notes of interoperability R12/11 GR 2)
  • Recreate the grants and synonyms
  • Restart the application server process
  • Apply the Oracle human resources (HRMS) patch 7721754 (11 I only)
  • Select the database Vault
  • Synchronize the views of Workflow
    • Note that this step must be completed after the 12.2.0 upgrade and application of the last ORS 12.2 when all services are up to such noted in last step be

  This stage supposed to complete interoperability for 12.1.0.2 with R12.1.3? Am I wrong?

  As I'm not going to bring up the applications before upgrade R12.2, that I have to perform interoperability for 12.1.3 or can I perform the steps of interoperability for 12.1,0.2 with 12.2?

  Thank you

  You must apply the patches immediately after installing 12.2.0 software.

  This is mentioned in the section '1.5 request latest patches from application-level technology to perform file system', Oracle E-Business Suite Release Notes, version 12.2 (Doc ID 1320300.1)

  Thank you

  Hussein

• With EM data masking and other utilities of security features available within the DB package

  Hello

  Please let me know your experience of the difference between EM data masking Pack and other security elements such as writing, available in the database Vault.

  Kind regards

  VN

  Hide data are used when you have to clone the database of production for developers. Its purpose is to sensitive data mask in the clone database and you can use several formats of masking (numbers random, random strings, shuffle of data, etc.).

  The masking process is irreversible. (http://docs.oracle.com/cd/E11882_01/server.112/e41481/tdm_data_masking.htm#RATUG04000)

  Writing of data (http://docs.oracle.com/cd/E11882_01/network.112/e40393/redaction.htm#ASOAG596)

  "Starting Oracle 11 g Release 2 (11.2.0.4) database, Oracle data writing allows you to hide (delete) data that are queried by applications or limited users." Drafting occurs in real-time when users query the data. Drafting of data Oracle is part of the Oracle Advanced security features. »

  In a nutshell, you create a policy of writing for a table using DBMS_REDACT package that will redact (mask) data for some users - depending on your political - select.

  For example, a group of users will not be able to view credit card numbers (1234 5678 1235 5690-> * * * 5690). Please note that the data are not hidden within the table.

  Database Vault is used to restrict powerful users (users with system privileges) to access some objects (and not only). Please see the DEMO on this link ( Oracle Database Vault |) Oracle database | (Oracle ) "

  • Oracle Database Vault (03:13)