Sense (+) sign

Similar Questions

• After that update to Firefox 8, the secure gold lock that appears in the corner, when signing to websites is gone

  Hi, I would like to know that when I sign in the Bank or other sites requiring a password that the site is secure. Firefox used to have a small lock gold down in the corner of the right hand to let you know that you signed in a secure site. After the upgrade to Firefox 8, that the lock is gone. How do you know if the page you log on is secure?

  The status bar is gone and the 'blocking' with her, from Firefox 4.0. Safety information on a web page are shown by the Site identity button.
  
  The former lock could give users a false sense that a site is safe to not to provide information to the site and showed that there is a secure connection that does not guarantee that you are connected to the right server. The Site identity button is introduced in Firefox 3.0 to show more complete information of 'identity' for HTTPS web pages.
  
  https://support.Mozilla.com/en-us/KB/site+identity+button

  You can add a padlock in the address bar with the add-on locks- https://addons.mozilla.org/firefox/addon/padlock-icon

• How to convert a negative "signed short int" in a picture of two "tank"?

  Hello

  I'm having difficulties to convert a signed short int (2 byte) in an array of two characters.

  My current test is like this:

  void ConvertShortIntToByteArray(short int value){   unsigned char byteHi = 0x00; // High Byte of result   unsigned char byteLo =0x00; // Low Byte of result
  
    unsigned char C1 = 0x00;  unsigned char C2 = 0x00;  unsigned char C3 = 0x00;  unsigned char C4 = 0x00;  short int tempValue = 0;
  
      C4 = value % 16;  tempValue = value / 16;   C3 = tempValue % 16;  tempValue /= 16;  C2 = tempValue % 16;  tempValue /= 16;  C1 = tempValue % 16;
  
    byteHi = C1 << 4;   byteHi += C2;
  
    byteLo = C3 << 4;   byteLo += C4;}
  

  It works OK for positive values (for example say that 240 = 0 x 00 F0) but negative values don't work here.

  Is there a way to convert signed short int values to an array of two bytes of an easier way?

  I know that common sense would be to go over binary like this:

  Assume value = -240:
  
  So abs(-240) = 240 = 00 F0 = 0000 0000 1111 0000
  
  One-Complement:1111 1111 0000 1111
  
  Add '1' to the One-Complement: 1111 1111 0000 1111+0000 0000 0000 0001  ------------------- 1111 1111 0001 0000
  
  Result = 1111 1111 0001 0000 = FF 10 = -240
  

  But is there an easier way that doesn't have to go to binary to achieve?

  Any help is greatly appreciated.

  Thank you and best regards,

  Bernd

  If you want to just let C do its thing:

  void ConvertShortIntToByteArray(short int value)
  {
      unsigned char byteHi = value >> 8; // High Byte of result
      unsigned char byteLo = value; // Low Byte of result
  }
  

  Or maybe a little more understandable:

  void ConvertShortIntToByteArray(short int value)
  {
      unsigned char byteHi = (value >> 8) & 0xff; // High Byte of result
      unsigned char byteLo = value & 0xff; // Low Byte of result
  }
  

• Other driver for photosmart 7660 in windows 7 installs not - says it is not digitally signed

  New computer with windows 7.  More old hp photosmart 7660.  HP says it has no new driver, but has the other pilot. Downloaded another driver

  DeskJet 5600 listed as recommended.  Try to update the device manager - says my other driver is not signed digitally. don't know where to go from here?

  I retried the entire process, this morning, and it worked.  I made 2 different things.  First of all when he asked for manufacturerand, I took Hp, I updated first and then chose the HP deskjet 5600 hpa.  Secondly, there is a screen that appears and asks

  If you want to use the driver that is already here (recommended) or replace it.  I had been choosing replacement because it makes sense to me, so this time I went with the recommended and it prints.  I note that under devices and printers it now

  5600 printer has a yellow triangle next to him.  When you troubleshoot, it tells me that a pilot of the photosmart 7660 device can

  not to be found.  May not be able to get rid of this message.  Thanks for your help.

• "to use Acer drive, please launch and sign in the Acer Revo One player". What/where is a Revo?

  All-in-one touchscreen, Acer with Windows 10 came with Acer drive icon on the desktop.  When I click on it, I get message 'to use Acer drive, please launch and sign in Acer Revo One player '.  Cannot find a Revo on my computer.  Web search indicates a Revo is a compact computer.  Cannot make any sense of this.

  The solution to solve this error is to uninstall Acer drive. You can find instructions to remove programs at http://acer.custhelp.com/app/answers/detail/a_id/39592/

• Orientation of the storm and code signing

  is it possible to change the orientation of the screen of the storm without using the API signed?

  Yes, turn on the phone.

  OK in a sense non-joking, if you're talking about defining what directions are allowed, you need key for use UiEngineInstance.setAcceptableDirections of signature.

  You need it for the view class, but you can get the values themselves, so that you don't need to actually use the class, thus avoiding the requirement of signing key.

• Is possible let activate domain multi UCS VM - FEX and sign up for the same vCenter

  Hi Experts,

  We have 7 domain UCS. But only a vCenter. Now, we want to enable VM - FEX on each UCS area and sign up for the same vCenter. Is - it work? I have found no description limit configuration on this relationship.

  Or we create 7 vCenter for each UCS area? (But I think it's not sense.)

  Best regards
  Meng-Yuan Hsieh (Nick)

  Hi Moua!

  I open a TAC case on that, and after that many discussions with Cisco, connecting several areas a single vCenter UCS is supported.  However, it turns out that Cisco failed to document this and how to make it work.  You will find that the procedures were written in old documentation for VN-LINK and others for VM - FEX.  This documentation shows that it is necessary to create new certificates, and it must match the key to expansion.  This is NOT true nor with the new versions of UCSM and vCenter.  Cisco, said they will update their documentation.

  Here are the steps that we took to connect two UCS areas for the same vCenter using default self-signed certificates.  I hope this helps...  Please mark this message as the right answer when you get a chance.  Thank you!!

  vCenter Version: 5.5

  UCSM Version: 2.2(5a)

  1. On the VM in UCS Manager tab, click VMware.
  2. Set up a key of the unique extension for every area of UCS.
  3. Click on "Configure VMware integration" on each area of UCS and export expansion of local storage.
  4. Install each UCS domain extensions in vCenter.
  5. After you install the extensions, back to UCSM and click Next where you left off in configure integration with VMware
  6. Run the wizard and after that it's over, areas of the UCS should now be connected to the vCenter.

  

• Send to the signing, first to examine and send to multiple people at once

  Hello

  When I'm compiling information I need that Information to be reviewed and signed by one of our partners before going off to customers.
  Unfortunately as I understand it, it will only send to have sequential. It would be great if it would be possible to have the document reviewed and approved in the House and then send them to the clients to accomplish "in any order.

  In short:

  I have installation offline. I put it in e-sign the partner reviews and signs off top and then there are sent to multiple clients to be signed "in any order.

  Hope that makes sense!

  See you soon,.

  Stone

  Hello Arabon

  We feature called hybrid routing in which the approver, and the Group of signatories will act in order while the Group of signatories can have parallel workflows between them. This feature is available in the account of the company and if you have that, please inbox me your registered e-mail address.

  Kind regards

  -Usman

• Accidentally, I signed up for two monthly plans.

  Accidentally, I signed up for two monthly plans. It was a mistake. I thought I was paying only for one, but now I paid for these two plans. They are the exact even if it has no sense to have two plans.

  Can you please help me cancel plans and maybe return me my money.

  This is an open forum, not Adobe support... Click below

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Cancel https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

  -or https://helpx.adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

• Problems of generator - can't change fonts, welcome screen extension not signed.

  Hello

  Recently I experienced a few problems with Photoshop that were - at first - easy to ignore. Now they impede my ability to do a job, so they need attention.

  Initially, he had problems after an update, that welcome screens was not displayed. They were only the white boxes.
  No problem, but I couldn't turn off the Welcome screen - it was simply an irritation at the start that I had to face.

  Later, it became "the welcome extension could not be loaded because it was not properly signed.»

  I reinstalled photoshop and reset preferences, delete the preferences, nuked all the adobe on my device software, read the forums (who do these things), but it still shows this error at startup.

  
  Now, it is not allowing me to change the fonts in my list.
  He said that he could not complete the action because of a program error.

  It's very bad.

  I need to be able to use other fonts than default.
  Without the ability to change a font, photoshop becomes useless for me.

  
  I am at a loss on what to do next to try to resolve this problem.

  Does anyone have experience with this error?

  
  I have never had any problem with any Adobe software when I had pirated versions.
  Since I had to pay for it (last year bit) I had a lot of problems with it.

  
  I plan to return to pirate versions, as they work without problems.

  However, if I do this, it causes problems with Adobe Connect and whatever, so I would like to avoid having to break the software to make it work properly.

  (even this text area maintains spoil and jump the cursor between lines autour!) "What the devil!)
  
  

  EXASPERATING.

  
  Thank you

  Pete

  Hi again,

  Today, I installed a pirated version of Photoshop, using xforce crack and now PS works again without the police or generator errors error.

  When I removed and reinstalled adobe PS CC since the adobe installer - it's broken again.

  It makes more sense to use the pirated version as the legitimate version is unusable.

  Therefore, I will not renew my subscription to adobe CC, that payment for defective software is a greater crime than piracy.

• Fill and sign Fonts

  I have trouble getting fonts seem consistent in Acrobat Pro DC. Specifically, I'm filling out a PDF of my insurance company. And when I use the "Fill & sign" tool, I begin to add text in the PDF file. For starters, you can even change the font type. That makes no sense at all. Then, worse yet, as soon as I find out the PDF file with my own text, I leave the filling and signing, tool (or print), and the police are completely different. See the pictures attached, before and after. Refer to the section of the identification number. The text sizing and spacing is completely different. Any ideas?

  

  Hi pjbarbour_rotor,

  Sorry for the inconvenience posed for you.

  You will need to fill out the feature request regarding the change of fonts when you use add text under "fill & sign.

  Reference: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  Now, once you add text, save the PDF file and the output of the tool to fill & sign, please make sure that the zoom settings are not changed.

  For example: if I add text to a file by using fill & sign, it will appear like this:

  

  But, if you have changed your settings for zoom (such as 100%), the text will appear smaller (as shown below):

  

  Please check the same thing on your side and made me know.

  We hope to get your reply.

  Kind regards

  Ana Maria

• Separate permissions for approver &amp; signer

  Today, signer and approver permissions are removed from the same checkbox in the settings of user (ability to sign documents) account. Our Organization has the need to separate these permissions, where some users can approve, but do not have the ability to actually run. Ideally, it would be split out into two fields to manage permissions separately.

  Hi Eugene,

  I think it makes a lot of sense, if is not something we do today. I've logged this as a feature request.

• Why can't sign in first items 10 to use a template?

  I'm trying to choose one of the templates to use for my film credits, but he keeps trying to make me sign. The signing in process starts, but never actually, it connects me or reject me. The signature in the box just remains on the screen.

  I never had to connect to use basic templates (Non-Plus Members Only). What can I do?

  Thank you.

  New Dad

  Bottom line: you cannot access this abandoned content.

  Details.

  Thanks for the screenshot. Which clarified the situation for me completely.

  Please refer to my screenshot of my first items 10 Windows

  

  Top left and top right miniature brands as seen in the 2nd row of thumbnails are photoshop.com and types. They are no longer available in the

  program. Photoshop.com and photoshop.com more are abandoned from Adobe products. Only titles available in 10 are displayed with thumbnails without these high marks to the right left/top page as seen in the second row. There is no work around or anywhere you can now buy replacements for 10.

  I don't know how and when the photoshop.com choices were always available for you. Unless it's a transition out of photoshop.com and a glitch in the system that allowed him. If you actually bought one of these photoshop.com more content items, you should not have problems when trying to access the files. You should have the files completed on the hard drive of your computer.

  However, for versions 11 and 12, Adobe now has many of these choices as part of the purchased product (no connection with photoshop.com plus or rebel from Adobe which is now Adobe favorite sharing site). Nobody sells replacements for 10. Buy 11 and 12 to get copies of these files is possible but...

  The Connect dialog box no sense in versions of Premiere Elements earlier than 11.

  Please let me know if you have any questions on the above or need for clarification on what I wrote. I can offer suggestions for your search all the files purchased photoshop.com if that turns out to be the case.

  Thank you.

  RTA

• Error using APDU buffer for update methods (encrypt/decrypt/sign)

  Hi all
  
  I get an Exception system and the error code is 3 which is ILLEGAL_TRANSIENT. I pass data between two cmdlets using the APDU buffer. The 1st applet is the applet currently selected, which transmits the data to the applet 2nd to perform cryptographic operations. Encrypt/decrypt and sign all work well using init() & doFinal() when the data is small enough to be transformed into a go. The problem is when I try to use update() for larger data, I get the error ILLEGAL_TRANSIENT (I get this for a signing operation, but guess I'll get the same thing to encrypt/decrypt as well)
  
  The JCRE (section 6.1.5 of the 2.2.1 version) specification explains this error as an attempt to access a transitional type CLEAR_ON_DESELECT object when the current context is not the context of the currently selected applet. The APDU buffer comes from the applet 1, which is the applet currently selected, so I think that's why I see this error. However, it does not make sense to me that I am able to do all calls except the update using the APDU buffer - clearly the update call tries to use the buffer passed to somehow illegal - but that shouldn't be my problem, I thought I'd...
  
  Any help/comments would be appreciated.
  
  Swati

  In addition, when you create the instance of the encryption algorithm you set externalAccess true? This is necessary to access the applet properly through ITSELF.

  The doc of the API:

  externalAccess true indicates that the instance will be shared between applet multiple instances and that the instance of the encryption algorithm is also available (via a shared interface) when the owner of the instance of the encryption algorithm is not the currently selected applet. If true the implementation doesn't have to allocate internal data CLEAR_ON_DESELECT transitional space.

  See you soon,.
  Shane

• Sign fault codes submitting Air iOS app

  Hi people,

  I was wondering if anyone of you could be able to point me in the right direction on this. I have same problem try to submit an ipa file to iTunes Connect via the Application Loader and got to the extent of the zipper the .app file and submit. I get an error in the Application Loader that: "could not execute the command lipo:...» Cannot map an input file... ' and 'Application does not codesign verification. The signature was invalid, contains unauthorized rights or is not signed with an iPhone Distribution certificate. "and"failed to retrieve payments codesigning of your application. "Please ensure that... is a valid executable of Mach, which is properly work together."

  Now, before you post here, I did the following without result:

  (a) I refreshed all certificates and upward, completely on the Mac once and completely under Windows Mobile provisions as well using openSSL. Both times, I started at the top of the application of CSR.

  (b) I can't install and run my file ipa very well on the test iPhones using the file distribution.p12 and delivery distribution ad_hoc mobile partner. It's still only when I compile 'app store release', using the distribution.p12 file and the provision of mobile app_store it happens.

  (c) I use Adobe Flash Pro CS6 on Windows 7 64, with Adobe Air SDK 3.3, and I submit a real Macbook Air with OS X Lion mountain.

  (d) I also went as far as to try the two sets of cert/provisions (generated on mac and windows), by publishing the ipa within Flash Pro CS6 and also using the adt command line, but still the same... works very well as ad_hoc on the test iPhones, but will not submit through the Application Loader. Same mistakes of codesign verification.

  (e) my application uses native extensions, but these compile and run perfectly well on the ad_hoc builds.

  I'm pulling my hair at this point as to what I might be missing or hurt, or if there is a bug in good faith with the combination of technologies that I use? I would like tips/advice/suggestions for anyone who knows what I describe here.

  If there is someone from Adobe who can look at my build file for submission of app_store ipa, it would be wonderful as well.

  with sincere friendships.

  Alex

  SOLUTION

  -------------

  I am posting this so that others with the same problem can benefit. There is no sense at all, but when I changed the file .zip extension API on my Windows machine first (on Mac), transferred the .zip file on my Mac, then unzipped on my Mac, and re-compressed the .app file on the Mac, the Application Loader accepted submission.

  I was previously sending the .ipa itself to my Mac and rename the file in a .zip file on the Mac as the first step. It is literally the only difference, and it would have saved me 3 days of lost time.

  hope this helps,

  Alex