Server 2003 32-bit Enterprise only see 3 GB RAM if 8 GB is assigned in the VM

Similar Questions

• I changed my hard drive one that CPU to another in windows server 2003 64-bit enterprise version has been installed.now its prompting me to activate.what measures can be taken to activate with the old key

  Hello world

  I use windows server 2003, enterprise edition 64-bit. I changed the hard drive of one single processor to others. and now I face problem of activation. I'm not able to enter my old key to activate it. and its asking me to connect on internet.i must sign my user name and password to use internet.

  If anyone can suggest me how to get activated with over to connect to the internet and using the same old key for the hardware has changed...

  Hello

  1A, that the version of Windows is OEM copy?

  Check out this link to validate windows.

  I suggest you to validate windows and it would automatically activate the copy of Windows.

  What is the validation, and how does it work?

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/what-is-validation

  I hope this helps.

• Virtual machines, run extremely slow when the console is consulted 2 virtual machines Windows Server 2008 64-bit, Windows Server 2003 32-bit, 2 VMWare for virtual machine

  I'm in a difficult situtaition here.  I am the daily contact with a new client.  My linux guy, who is also my boss who is very busy, asked me to do some research trying to find answers for what's not on this server. We have a dual Quad Core 2.5 Ghz Lenovo server with 10 GB of ram.  2 500 GB hard drives are Raid 1.  We run Virtual Server VMWare 2 on a Debian with Gnome installation as a user interface for the side of things Linux.  Grub is the boot loader. There are two virtual machines running on the server.  The one machine that serves as a domain controller is a Windows SBS 2008 Server 64 bit, and the secondary machine has no responsibility domain.  The second machine is a Windows Server 2003 32-bit.  the 10 GB of ram 6 GB is allocated to the SBS server and 4 GB to the 2003 server.

  The problem I am running into is that everything is so slow, especially if I connect remotely to do any sort of administration on the network.  Some examples of issues I've noticed is that as soon as I log on the server via Remote Desktop SBS console management Windows Server spike to 80-95% CPU usage and it will not stop unless I close the management console.  Another instance is that if I open Backup Exec 12.5 on the SBS server it will kill the speed of the processor as well.  Long story short, there are a lot of machine to do what we need to do, but something is not configured right and non of us know what it is.  Another point to note is that the server has been in production for about 3 weeks, and the server seemed to have locked up just twice.  My professional guess is that over time, some chose thing is eating causing the crash of the memory.

  Sorry I do not have much technical insight on this topic, but this is the best I have to offer.  Any questions you all have, I'll ask my people and see if I can answer, but I could really use your help here.

  Thank you in advance,

  Heath

  2 things:

  1 you really need hard drives more than 2 in a RAID 1 for proper performance under load. More disks the better. Although I don't think that's what your problem is, he'll probably be the problem Next you will do.

  2. I don't know exactly where the configuration file is on your box of Debian for VMware Server, but you should consider adding the following options in the configuration file (on windows, it's the vmware 'config.ini'):

  prefvmx.minVmMemPct = "100".

  MemTrimRate = 0

  sched.mem.pshare.Enable = "FALSE".

  mainMem.useNamedFile = "FALSE".

  If you do some research, you can read about what these options (the largest is the memory page sharing - it should only be left on if you have a bunch of similar virtual machines running on the same box, that you don't have.) I honestly know why this is on by default, he kills the CPU when virtual machines are running different operating systems). These are the options that I now use standard in VMware Server deployments, with huge performance increases after you have added the. Just give a try.

  Edit: Also make sure that you have installed in your virtual machines VMware tools.

  Dimitri Rodis

  Integrita Systems LLC

  http://www.integritasystems.com

• I want to run Auntie Ex-platforms on Server 2003 64-bit, but it's 32-bit software.

  I want to run Auntie Ex-platforms on Server 2003 64-bit, but it's 32-bit software.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• My Server 2003-64 bit in safe mode windows

  Hello

  I am an administrator amd I have 2 Server stand alone with windows Server 2003 64-bit I can't start their place in fashion without failure.

  and the seedbed for me question, is that two of them are disable in safe mode startup.

  but other servers with win Server 2003 32 bit boot in safe mode.

  Please help us...

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows Server 2003 (64-bit), Terminal Server has 2 mouse pointers when you connect via RDP

  I recently reinstalled one of our Terminal Server Windows Server 2003 (64-bit) servers.
  When you connect via RDP, I get 2 mouse pointers. One seems to be the pointer to the session that changes of hourglass, etc... and the pointer remains under the arrow.

  I have all the updates that are installed.
  There is no options on the RDP settings like what I use on other RDP to the other Terminal server sessions and is not on any other I RDP server on my client.

  I connected as other RDP clients and get with the same problem, is not a customer number
  Is there a setting on the server to disable this option?

  How can I remove the pointer that does not change in the session?

  These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• Create a 11.2.0.1 DBConsole windows Server 2003 32-bit

  Hello
  
  I installed a database of 11 GR 2 (11.2.0.1) on a windows Server 2003 32-bit. Now, I have to create it's dbconsole, since I did not do it on the installation and the creation of the database.
  
  I searched through the notes 278100.1 , and it explains how to create a DB 11.2. What I found, it was that he made the launch of this command:
  
  EMCA - config dbcontrol db-rest create
  
  Is that ok? And if it is, at the end of the process it will say por which affected the em Console?
  
  Thank you

  Hello

  EMCA - config dbcontrol db-rest create

  It should work.

  Is that ok? And if it is, at the end of the process it will say por which affected the em Console?

  Yes, you will have the full URL to connect to the DBConsole.

  Hope this helps.
  Best regards
  Jean Valentine

• 11 G Server 2003 64-bit wide Page problem

  I have two 11g 64-bit Server 2003 Enterprise servers running with the great support Page turned on without any problem. However, I have a new server with the same database and the OS versions that can't do the work of great Support of Page. This server is equipped with processors dual core quad Opteron 2393 SE, others have Intel processors. It's really the only difference I can see. I did everything to turn on the large Page support, has added the Oracle user ("Act as part of the operating system," adjust memory Quotas for a process, "Replace a process level token", 'Lock Pages in memory'). I also added the ORA_LPENABLE = 1 in the registry correctly. As soon as I do and restart the server, the database fails to start and will only start once I put ORA_LPENABLE = 0. These alerts log says:
  
  Starting ORACLE instance (normal)
  Great on page: 1
  The large page size: 2097152
  Page size in great demand: 16777216
  Optimized size NUMA great guidance page: 16777216
  Mar Feb 02 17:43:09 2010
  Total allowances of Numa LP: 00000001CC000000
  Numa LP forced allowances. : B 00000000 0000000
  NUMA LP Alloc on node: 0 alloc:0000000035000000 req:0000000035000000
  NUMA LP Alloc on node: 1 alloc:0000000036000000 req:0000000036000000
  NUMA LP Alloc on node: 2 alloc:0000000045000000 req:0000000045000000
  
  That's where it stops. The server has 8 GB or RAM and BMG is about 3 GB. I don't know if I'm doing something wrong or if there is some sort of BUG with the Opterons from AMD. Any advice would be greatly appreciated, thank you.

  MOS note 422844.1:

  "On AMD systems, you may need to disable Numa support in order to get the instance to start with large Pages. You do this by setting the following registry as a REG_SZ parameter, in the same tone as the ORA_LPENABLE:
  _ENABLE_NUMA - set to false.

  In addition, in the init.ora, set the following parameter:
  _ENABLE_NUMA_OPTIMIZATION = FALSE '.

  Of course, these features of initial underscore means "to connect to a support call. Maybe they have some fix now, I think remember that some well-known bloggers are fans NUMA.

• Installation 11.1.2.1 using oracle database in windows server 2003 64-bit

  Hi gurus,
  
  I am about to install hyperion version 11.1.2.1 with oracle on a windows 2003 64-bit database.
  
  Do I need IIS component for hyperion to install?
  
  Thanks in advance

  Hello
  IIS is required only if you install epma, fdm, and/or hfm to the server.

  See you soon,.
  Alp

• Driver Officejet 4620 Win Server 2003 32 bits

  I want to install the Officejet 4620 in my network with a Win 2003 (32 bit) server, is there a driver, I can use?

  Hello

  I see that you have a question about a certain driver for Win Server 2003. Unfortunately, there is not a driver available for it, but you can install an alternate driver such as the 990 c driver.

  You can follow this thread made Shane and install the 990 c driver.

• The connection Server 4.6 on windows server 2003 32-bit sp2 installation

  Hello

  I'm trying to install the server to connect to 4.6 on windows server 2003 sp2 32-bit VM, I got the following error

  VMware-connectionserver-x86_64 - 4.6.0 - 366101.exe is valid, but for a computer other than the current computer type

  Processor: Intel (R) Xeon (TM) CPU 3.60 GHZ and I configured 2 GB RAM with PAE.

  Waiting for your help to solve this error.

  Thanks in advance

  You try to use the 64-bit Installer, download the 32-bit Installer instead, and it should be good.

  Linjo

• Install on Windows Server 2003 32-bit OBIEE

  Hi all
  
  I try to install OBIEE on Windows Server 2003. I have installed the Java SDK from here:
  http://Java.Sun.com/javase/downloads/index_jdk5.jsp
  
  Then I set the JAVA_HOME to be D:\Sun\SDK and %JAVA_HOME%\bin we add the path in the system variables.
  There is also a variable user called Administrator PATH with the value D:\Sun\SDK\bin.
  
  When I run Setup OBIEE, I wonder for the location of the JDK (JAVA_HOME), but no matter what I come here, I get the following error:
  "Please specify a location for installation of JDK valid."
  
  I tried D:\Sun\SDK, D:\Sun\SDK\bin and a few others too, but nothing seems to work.
  
  Any ideas would be appreciated.

  Hi Alex,

  Try D:\Sun\SDK\jdk

  Andrej

• Unknow Device for HP DL380 G7 using Windows Server 2003 32-bit

  I need help to identify the right Windows 2003 SP2 32-bit driver for an unknown device in the Device Manager on a HP DL380 G7 server.  I have attached a screenshot.  The only information than the other, is that the device can be a PCI ISA device.

  Any help is greatly appreciated, if I'm in the wrong forum, please send the correct forum.

  Thank you

  Robert Jung

  [email protected]

  I found the problem, it's actually in a HP ProLiant Pack driver called: cp010950.exe attached is the image of the named driver: HP NULL IPMI Controller Driver for Windows 2003 version 1.0.0.0

• Remote agent ACS - can I install on windows server 2003 64-bit

  I have Setup tehfor customer 4.2 ACS to authenticate the client wirneless, ACS have to communitate with AD (windows 2003, Enterprise Edition, 64 - bit). Can I install remote agent (ACS 4.2) for ACS ACS can contact the AD to do?

  Please help me.

  Currently we do not support 64 bit OS.

  Kind regards

  ~ JG

  Note the useful messages

• Upgrade Server 2003 64-bit 2008 32-bit

  Hello

  What is the best way to upgrade a vCentre (32 bit), 2003 server to a new Server 2008 vCentre 5.0 (64-bit).

  I'm looking for by keeping all the information from the database and I hope to keep the online environment while the upgrade has completed, is it posible?

  Thank you

  Al

  You cannot upgrade a 32 bit OS to a 64-bit OS.  You will need to build a new host OS vCenter.  Is the local or remote DB?