Driver Officejet 4620 Win Server 2003 32 bits

Similar Questions

• My Server 2003-64 bit in safe mode windows

  Hello

  I am an administrator amd I have 2 Server stand alone with windows Server 2003 64-bit I can't start their place in fashion without failure.

  and the seedbed for me question, is that two of them are disable in safe mode startup.

  but other servers with win Server 2003 32 bit boot in safe mode.

  Please help us...

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Limit Max SGA on Oracle 9.2.0.8 on Win Server 2003 SP2 (32-bit)

  I am trying to increase the total SGA to 4 GB on an instance Oracle 9.2.0.8 on Win Server 2003 SP2 32 bit version. Is this possible? I tried to find something on google and metalink but has not found any post answering my question.
  
  In my attempts:
  I did 4 or 5 attempts every time try a step further, as explained below. On the issue of a start command, whenever I get the following error and the instance would not start.
  ORA-27100: memory realm already exists to shared
  
  (1) I changed the sga_max_size in the spfile to 4 GB using
  * "alter system set sga_max_size = 4294967296 scope = spfile" * "
  & stop instance successfully. It will not re-start and ORA-27100 I.
  (2) I stopped and restarted Windows Oracle service using the Task Manager, but no luck and I have seen the same error.
  (3) I tried to restart the server, but that did not help either and I got the same error.
  
  Whenever I have to start the instance with the ORA (pfile) init file and recreate the spfile to restore the old settings.
  
  Links or suggestions?

  On Note: 225349.1, it is stated that you need to use ' / EAP ", or" / 3 GB/PAE "switches to the boot.ini file, but there is a restriction:
  "It is important to note that this extra memory can ONLY be used by Oracle in the form of an increase in the value for.
  DB_BLOCK_BUFFERS.
  Read the Note: 373602.1 is also recommended, he concludes:
  "It should be noted that this is at best a short-term band-aid and the.
  real long-term solution is to upgrade to a version of operating system 64-bit"

• Net work with Win Server 2003 Logon

  I have a problem to connect to a running with Win Server 2003 Net Office job, my OS Win - 7 professional 64-bit desktop above. Then the system Win-7 sailed into this network and integrated into the field of the system?  are there procedures that could help maintain the system in his?

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Virtual machines, run extremely slow when the console is consulted 2 virtual machines Windows Server 2008 64-bit, Windows Server 2003 32-bit, 2 VMWare for virtual machine

  I'm in a difficult situtaition here.  I am the daily contact with a new client.  My linux guy, who is also my boss who is very busy, asked me to do some research trying to find answers for what's not on this server. We have a dual Quad Core 2.5 Ghz Lenovo server with 10 GB of ram.  2 500 GB hard drives are Raid 1.  We run Virtual Server VMWare 2 on a Debian with Gnome installation as a user interface for the side of things Linux.  Grub is the boot loader. There are two virtual machines running on the server.  The one machine that serves as a domain controller is a Windows SBS 2008 Server 64 bit, and the secondary machine has no responsibility domain.  The second machine is a Windows Server 2003 32-bit.  the 10 GB of ram 6 GB is allocated to the SBS server and 4 GB to the 2003 server.

  The problem I am running into is that everything is so slow, especially if I connect remotely to do any sort of administration on the network.  Some examples of issues I've noticed is that as soon as I log on the server via Remote Desktop SBS console management Windows Server spike to 80-95% CPU usage and it will not stop unless I close the management console.  Another instance is that if I open Backup Exec 12.5 on the SBS server it will kill the speed of the processor as well.  Long story short, there are a lot of machine to do what we need to do, but something is not configured right and non of us know what it is.  Another point to note is that the server has been in production for about 3 weeks, and the server seemed to have locked up just twice.  My professional guess is that over time, some chose thing is eating causing the crash of the memory.

  Sorry I do not have much technical insight on this topic, but this is the best I have to offer.  Any questions you all have, I'll ask my people and see if I can answer, but I could really use your help here.

  Thank you in advance,

  Heath

  2 things:

  1 you really need hard drives more than 2 in a RAID 1 for proper performance under load. More disks the better. Although I don't think that's what your problem is, he'll probably be the problem Next you will do.

  2. I don't know exactly where the configuration file is on your box of Debian for VMware Server, but you should consider adding the following options in the configuration file (on windows, it's the vmware 'config.ini'):

  prefvmx.minVmMemPct = "100".

  MemTrimRate = 0

  sched.mem.pshare.Enable = "FALSE".

  mainMem.useNamedFile = "FALSE".

  If you do some research, you can read about what these options (the largest is the memory page sharing - it should only be left on if you have a bunch of similar virtual machines running on the same box, that you don't have.) I honestly know why this is on by default, he kills the CPU when virtual machines are running different operating systems). These are the options that I now use standard in VMware Server deployments, with huge performance increases after you have added the. Just give a try.

  Edit: Also make sure that you have installed in your virtual machines VMware tools.

  Dimitri Rodis

  Integrita Systems LLC

  http://www.integritasystems.com

• I want to run Auntie Ex-platforms on Server 2003 64-bit, but it's 32-bit software.

  I want to run Auntie Ex-platforms on Server 2003 64-bit, but it's 32-bit software.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2003 (64-bit), Terminal Server has 2 mouse pointers when you connect via RDP

  I recently reinstalled one of our Terminal Server Windows Server 2003 (64-bit) servers.
  When you connect via RDP, I get 2 mouse pointers. One seems to be the pointer to the session that changes of hourglass, etc... and the pointer remains under the arrow.

  I have all the updates that are installed.
  There is no options on the RDP settings like what I use on other RDP to the other Terminal server sessions and is not on any other I RDP server on my client.

  I connected as other RDP clients and get with the same problem, is not a customer number
  Is there a setting on the server to disable this option?

  How can I remove the pointer that does not change in the session?

  These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• Win server 2003 machine starts file system error

  My Win Server 2003 has suddenly got a C:\Windows\System32\system file is missing or corrupt error. We were able to replace the file in the repair folder and got the server up and running.

  However, Active Directory seems to have disappeared. The server has not yet a domain listed in AC. All entries are simply not there.
  How is it possible and how can pick us up or recreate AC? A backup copy of the AC, unfortunately, had not been done.
  Any help is appreciated.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the HE public Pro on TechNet. Please post your question in the Technet Forum. You can follow the link to your question:

  General Forum(Windows Server) Technet

  Hope this information helps.

• Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.»

  Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.» All solutions? CPP, Volume Shadow Copy Stallion are started.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.

• Unable to connect to win 7 ultimate laptop for win server 2003 r2

  I have win server 2003 r2 ent to connect to the internet through a router - wired.

  Win 7 laptop holiday connected wireless to the router.

  I am not able to connect win 7 to the server.  I can RDP server on the laptop.

  I tried to connect laptop plugged into the router, wireless disconect and see if I could connect to the server. no luck.

  any help is appreciated.

  Hello
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
   
  It will be useful.

• How can I move all win xp pro 64-bit programs old internal hard drive to hard drive internal nine win 7 pro 64 bit

  I want to install a new internal hard drive of my computer, my old internal drive is running Win XP Pro 64 bit OS, the new drive will be Win 7 Pro.

  Is there a method much less time to transfer programs from the old drive to the new?

  I have both drives in the same machine to do the transfer. If you have a set of instructions please post them to send me the instructions.

  Thanks in advance

  Sorry, but you can't do that.  When you move from one computer to another, you must reinstall all the programs.  This is because the parts of the program go to different places, and there are updates the registry involved as well.  There are also some activation to worry.  The last time, you can copy programs from one computer to another in the BACK long days long ago.

  Good luck.

• ESX 4.1, Win Server 2003, ESET NOD32 Server Admin

  Greetings!

  I moved my ESET NOD32 physical server so that it became a virtual machine running on ESX v4.1

  I used the VShpere customer, importing machine tools to achieve this.

  My virtual machine sees the network and the internet very well and has

  no significant errors in the server log.  It is currently running Win serv 2003.

  My ESET NOD32 client machines (PC, servers) now States, the server cannot be contacted.

  We will use the default port, 2223 for admin server for example.

  The Windows Firewall is DISABLED on the server of ESET NOD32.

  Is there something in ESX / VSphere that prevents certain ports to be used? A place for 'open port '?

  RSVP

  Thanks in advance...

  Checking configuration of the customer as a client to connect to the ADI of server - name or ip address, verify a network connection to the server (ping), also check the status of the blink of an eye on the Server service.

  ESXi is not any firewall between VM and the rest of the network.

• Server 2003 32-bit Enterprise only see 3 GB RAM if 8 GB is assigned in the VM

  Created a new virtual machine in Vsphere 4 using Server 2003 32-bit Enterprise. The Enterprise edition to see the extra RAM that the VM assigned but so far is only 3 GB.  I've read several things about adding something in the boot.ini file, but I don't think in this case it would be a solution, as this seems to help you overcome the problem on a Standard Edition 32 bit, not the company that should see the RAM.

  Has anyone else encountered this problem and possibly find a solution?

  Your physical address extensions are enabled?  Here's the Microsoft KBase article that I followed to get 2 of my servers of the company to work.

  http://support.Microsoft.com/kb/283037

• Create a 11.2.0.1 DBConsole windows Server 2003 32-bit

  Hello
  
  I installed a database of 11 GR 2 (11.2.0.1) on a windows Server 2003 32-bit. Now, I have to create it's dbconsole, since I did not do it on the installation and the creation of the database.
  
  I searched through the notes 278100.1 , and it explains how to create a DB 11.2. What I found, it was that he made the launch of this command:
  
  EMCA - config dbcontrol db-rest create
  
  Is that ok? And if it is, at the end of the process it will say por which affected the em Console?
  
  Thank you

  Hello

  EMCA - config dbcontrol db-rest create

  It should work.

  Is that ok? And if it is, at the end of the process it will say por which affected the em Console?

  Yes, you will have the full URL to connect to the DBConsole.

  Hope this helps.
  Best regards
  Jean Valentine

• WIN server 2003 and CF administrator

  I installed my server. Another is running WIN Server 2003 instead of the old Server 2000. I upgraded to 8.0 with all patches. I'm currently running Sun Java 6 (update 3). When I click a button 'Browse' in the cgi Director the browser closes. The fix for this knowledge?

  The problem turned out to be the Java JRE version. I uninstalled Java 6 and installed 1.4.05 and the problem solved.