Server 2008 on a 2003 domain

Similar Questions

• ACS any Version with Windows Server 2008 R2 64-bit domain controller

  Hi all

  Is there any version of ACS is currently working with Windows Server 2008 R2 domain controllers?

  Our server controls has recently upgraded domain controllers to 2008r2 and off 2003 servers. This did not our ACS 4.1.4 really happy.

  I read now serveral messages about problems with the ACS and Server 2008r2 and hope to find a solution (not to mention that switching to LDAP, yukk).

  Thank you

  Pato

  ACS currently cannot be installed on a server running Windows 2008 R2.

  As an alternative, you can install ACS on a member server.  Authentication

  ACS uses the local machine net API authentication both compared to a 2008

  R2 domain will work.  The Remote Agent can also be installed on a 2008 R2

  Server if you use devices.

  If you install ACS on a member instead server here is how to configure services

  to authenticate properly with the domain:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/installation/guide/Windows/postin.html#wp1041304

  -Jesse

• Model of Windows Server 2008 R2 will not domain join

  Hello.

  I made a few model of Windows Server 2008 R2 to our esx 4 update 1 hosts.

  My isue is that these servers will not join the domain with the customization, I did. I know I use the right user (with appropriate rights) because I use the same user on other models.

  Does anyone else have this problem?

  Do I did wrong?

  Hi all

  If you guys have tried to enter the area do not use the NetBIOS name? In other words... Please try entering the domain FULL of the domain name.

  Also make sure that the connection is entered with the UPN and not the pre-Windows 2000 format, in other words: username@FQDN instead of user domain\username

  Thank you!

• What is advised, EM install on Server 2008 R2 or 2003 R2 32-bit W

  Hello
  What is advised in of Villa, Enterprice Manager 11 g to install on Windows Server 2008 R2(32-Bit) or R1(32-Bit) in Windows Server 2008, or Windows Server 2003 R2 (32-bit)? I would use a distributor of bone. In which cases above described, I will have less problems with instalation?
  
  Kind regards.

  You should check:

  * Auditor's Certification oracle Enterprise Manager Grid Control [ID 412431.1] *.
  https://support.Oracle.com/CSP/UI/Flash.HTML#tab=dashboard (= Dashboard page & id = gdk5rmsm ()), (page = KBNavigator & id = gdk5sgew(viewingMode=1143&from=favorites&))

  for combinations certified OEM GC and Windows

  Another thing that you should know is:

  Virtualized environment certification
  For more details on political support on VMware Oracle, please see the Note [249212.1 |]
  Oracle Enterprise Manager is not certified with other configurations of virtual machine (other than the Oracle VM) at the moment. This includes solutions Xen, Virtuozzo or Microsoft VM.

  Concerning
  Rob

  http://oemgc.WordPress.com

• Windows 2008 level/AD 2003 domain running

  I have 2 Windows server 2K 8 running Active Directory @ level 3/domains in forest 2K.  I'll fall on any problem with that set up?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• The client (Windows XP, Vista, Windows 7) users can connect to Microsoft Small Business Server 2008?

  Dear all,

  I intend to install on Server 2008 SBS Active Directory domain controller. In this session, I would like to know the client users can connect to the SBS server or not. If CAN, I want to know the steps & solutions on this answer and if NOT, why the clients could not connect to the SBS server.

  Server 2008 SBS can also be installed on the sequence of steps:
  SBS 2008 (AD, Exchange Server, SQL 2005 or 08, CRM4.0). It depends on the situation of the organization.

  I really want to know that, if we install steps on SBS 2008 above, can clients connect to the server?

  Kind regards
  Tun Aung Kyaw

  Hi Geraldine Tun.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows server 2008 r2 domain controller deletes printers on windows 2003 Server

  We have recently installed two new Windows Server 2008 R2 servers in our field.  one of the new servers is the new domain controller (successor of Windows Server 2003 SBS, which has been decommissioned).  There are two other Windows 2003 servers in the domain.  When we turn off all servers for maintenance and then power them back on, the print on the windows 2003 Server spooler crashes; printers are deleted and the server does not allow you to add printers.  is this be caused by some settings in windows server 2008 r2?  This happened twice, and the solution is to rub the print on the windows 2003 Server spooler and reinstall the printers from scratch.

  Hello MPF_mec29,

  Thanks for posting your question in the Microsoft answers Forum. If you have questions about Windows Server, please visit the following link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Eddie B.

• run adprep on Server 2003 dc, but server 2008 does not recognize he ran on Server 2003

  Try to add a Server 2008 as a domain controller in a domain of 2003 server. Run adprep on the 2003 server, then ran dcpromo on Server 2008. got an error saying run adprep on Server 2008. following error was that adprep can only be run on a domain controller. checked the 2003 Server & adprep has already been run on this. receive errors. How can I get the Server 2008 see that adprep has already been run on Server 2003?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

• Windows 2003 domain upgrade to Windows 2008

  I have problems to find any information about it. I do a 10 minute presentation on the following scenario. Can anyone help or point me in the right direction

  • You have a Windows 2003 domain conisting of: -.

    
    

    1 x Windows Server 2003 AD

    1 x Exchange Windows 2003 Server

    1 x Windows 2003 file server and print

    1 x Aplicatiom in Windows 2003 Server (SQL, case)

    25 x Windows XP desktop computers / laptops

    
    

    You intend to upgrade/migrate to a 2008 domain. Need to consider the following:--

    
    

    Why update?

    What's new?

    What order/priority should take the upgrades?

    What are the best practices in rank?

    What are the problems that I am likely to encounter? Ried to solve the problem

  See you soon
  A dizzy

  Where's your homework due?

  Windows Update has nothing to do with the upgrade of Windows. Try to post in this forum instead-onlinehttp://social.technet.microsoft.com/Forums/en/winservergen/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Server 2008 R2, with two Windows Storage Server 2003 Standard: How can I add the MAC authentication on top of Active Directory authentication for a storage servers?

  I have two running Windows Storage Server 2003 storage servers in a domain R2 Windows Server 2008 Standard.  On top of the Active Directory authentication, I want to add authentication of MAC address for the access to one of the storage servers.  In this scenario, an authenticated user is unable to log on to the target storage server unless the user is also on one of the computers MAC address accepted.  All domain users will have access to other folders and files as configuration storage server in Active Directory.  I already have a user access to installation by the permissions for folders on the storage server target, but I still want to restrict access to specific computers as well.  For what it's worth the server hardware is HP Proliant DL360 G5 for the Standard Server 2008 R2 and server HP Proliant DL185 G5 for two Storage Server 2003 computers.  I don't want to have MAC address authentication as the main means of access control to the network, only for the storage server a as an addition to control Active Directory.

  Hi Kerry,

  The question you posted would be better suited in the TechNet Server Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Keep us informed on the status of the issue.

• I have given rights of domain users to log on locally, but still cannot connect (Server 2008)

  Hello. I ' using server2008r2 on virtualbox. I'm going through the 70-640 exam.

  I went through the steps described in this article http://technet.microsoft.com/en-us/library/ee957044 (WS.10) .aspx to add domain users rights to login locally. I ran gpupdate/force and me rebooted the machine, but I can not yet connect locally. I get "you cannot connect because the logon method, you use is not allowed on this computer.

  Any ideas?

  I changed the default domain policy Instead of the default domain controllers policy. ::) Works now.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows Server 2008 IT Pro Networking Forum: http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2general/threads

  Kind regards.

• Unable to validate a way out of trust on either of the two domains using Windows Server 2008 R2

  I have two domain controllers in the two different forests.  Both have a Stub dns setup for each other and can ping both the field and the name of dc for eachother.  Domain1 build outgoing approval and validate successfully.  Domain2 see confidence applied, however any attempt to validate this trust or build from the Wizard ends with only 2 domain cannot locate the domain controller for Domain1.  What can be done to allow Domain2 validate this trust?

  Hello

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• Licenses to transfer to a new Server 2008 CAL (NOT from Terminal Services) of Server 2003?

  Can I transfer licenses CAL (NO Terminal Service) of the 2003 server to a new Server 2008?

  We are to modernize a client from an old Server 2003 to new hardware Server 2008.
  I was wondering if there re 50 CAL to buy for them, we bought or if we can transfer those from the old server.
  The former will be decommissioned and formatted.
  Please note that I don't want to transfer the CAL of Terminal Server service but rather access normal Server CAL

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Edit GPO does not work in the domain Server 2008

  Failed to open the Group Policy object, you can have right does not fit the domain Server 2008

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Go Win Storage Server 2003 to Win storage server 2008?

  I have a nf600 with windows storage server 2003. Can I upgrade to server windows storage server 2008?

  Thank you!

  Hello

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/