Model of Windows Server 2008 R2 will not domain join

Similar Questions

• Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2 now not authentic

  Separated from this thread.

  Joachim

  When first pose the problem? Was it before or after the December updates?

  KB3004394 and KB3024777 appear in view update history? Or do they appear in installed updates?

  Gerry, thanks for your post. I have the same problem as Joachim started this thread. I am running Windows 7 sp1. I have a Dell computer and it's certainly a legitimate copy of Windows (confirmed computer 'properties' and it is enabled).

  By your post, I saw just to update and the KB3004394 (installed on 12/10/2014) and KB3024777 (installed on 12/12/2014) show as comfortable. I usually leave the Windows download updates automatically and I install them to stop. I watched the second update and according to Microsoft.com:

  Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2

  The KB 3004394 update which was dated December 10, 2014 can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer.

  My problem is, as of today 14/12/2014, I still get the pop up "this computer is running not windows genuine', even with KB3024777 installed.

  Any thoughts?

  Thank you

  Bob C

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Then type: slmgr.vbs - ato (this will force the activation)

  Leave the command prompt

  Restart your computer

• I can't perform a backup due to a State of "Out of resources" NTDS writer. Works with Windows Server 2008 R2. Do not know how to proceed.

  Hello

  I'm trying to backup of a domain controller with the syncsort backup software. Currently when I try to run a backup job job errors. I worked with the support of syncsort and have located the question to be a vss of NTDS writer. After the reboot the box, everything seems fine but if I try to run a task, that the particular author (NTDS) States that it is "out of resources." I'm not sure whats causing this or how to check. Any help would be thank you very much!

  pwarren.

  Hello

  I suggest you to ask your question in the TechNet Windows Server 2008 R2 support forum: http://technet.microsoft.com/en-us/windowsserver/bb310558

  Thank you.

• Windows Server 2008 32 bit - "not enough server storage is available to process this command."

  My operating system is Windows Server 2008 32-bit. When I install SQL Server 2008, system throws me error.

  "Not enough server storage is available to process this command."

  Free space in my drive C is 195 GB.

  Even I checked upward with IRStackSize, and is to have a value of 50. I still get the same error.

  Kindly guide me to solve this issue.

  Concerning
  Hitesh Parsawala

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Windows Server 2008 OS is not acceptable for Officejet Pro 8500 has more

  I am installing an Officejet Pro 8500 has more on a network that contains just a Windows Server 2008 R2 (64-bit) computer and a bunch of zero clients.  I read the document "installation of the software of the printer on Windows Server 2003 or 2008" including the updated title hope in my heart.  Unfortunately when I followed the instructions to install from a. MSI file, I get an error message saying "this computer's operating system is not supported", as can be seen in

  https://www.dropbox.com/s/oi3ur31frg8dhi3/HP%20error%20via%20MSI.PNG

  I am able to print to this device I have widower of drivers from Microsoft Update, but I want to be able to scan with it.

  I solved this problem by installing the complete package on a Vista laptop then set up a network folder on the server for the scanned images.  I then unplugged the laptop from the LAN and now I can scan using the front panel of the printer/scanner and images appear on the shared folder of Server 2008.

• Enable 3D Support box grayed out for Windows Server 2008 R2 vm, not for the Windows 7 virtual machine

  Hello

  IM wondering why the 3D feature is not available when I select Windows Server 2008 R2 as a type vm.

  For testing purposes, I have created a machine virtual 64-bit Windows 7 and the 3D box is not grayed out.

  I wonder why this is the case?

  Welcome to the community,

  3D support are not available for all guest operating systems. Please press the 'Help' button to find out what OS comments are supported.

  André

• ACS any Version with Windows Server 2008 R2 64-bit domain controller

  Hi all

  Is there any version of ACS is currently working with Windows Server 2008 R2 domain controllers?

  Our server controls has recently upgraded domain controllers to 2008r2 and off 2003 servers. This did not our ACS 4.1.4 really happy.

  I read now serveral messages about problems with the ACS and Server 2008r2 and hope to find a solution (not to mention that switching to LDAP, yukk).

  Thank you

  Pato

  ACS currently cannot be installed on a server running Windows 2008 R2.

  As an alternative, you can install ACS on a member server.  Authentication

  ACS uses the local machine net API authentication both compared to a 2008

  R2 domain will work.  The Remote Agent can also be installed on a 2008 R2

  Server if you use devices.

  If you install ACS on a member instead server here is how to configure services

  to authenticate properly with the domain:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/installation/guide/Windows/postin.html#wp1041304

  -Jesse

• Server 2008 SP2 will not install error code - 84 40007

  Im running a 3g air card / 4g from sprint - sometimes I have to manually activate the peripheral ether by means of windows or the sprint software - and keep my laptop crash - guys a best buy geek squad say nothing is wrong, but it must be something related to the updates of windows? or not?

  * original title - code - 84 40007-unknown error-M. SQL Server 2008 service pack 2 won't install *.

  Hi Jim,.

  When you get this error message or code?

  Is this an update which is getting impossible to install?

  Check the updates of windows see what update is offered and that one is making failure to install by following the link below:

  Install Windows updates in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Download .NET Framework 4 according to the link below:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9cfb2d51-5ff4-4491-b0e5-b386f32c0992&displaylang=en

  Note: you must have the latest .NET Framework to have Microsoft SQl server 2008 service Pack 2 (KB2285068)

  See the link below:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/554de6fd-c1ba-4974-b669-af517b4bdfea

  Kind regards
  Kiki

• I installed the free trial of windows server 2012 and will not start

  I could download it without errors, burn the ISO image to a CD. The installation process was not interrupted and without errors looks like.  I was able to create the admin password and sign in. As soon as I log in, I get this window cmd.exe.  He said c: \users\administrator. Something has gone wrong? If this is not the case, how does move?

  I'm not an IT professional but I'm ready to learn personnel, is also learning project, but it seems that the server welcome me friendly.

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows Server 2008 R2 does not vCPU additional 2

  Hi all

  I recently added 2 vCPU to my aforementioned 4 vCPU VM; the operating system is not the additional virtual CPU 2, but nothing of the vcpu is used (less than 1%) in ESXTOP.

  Is this a known problem or is there a way for the s vCPU must be recognized in the operating system? The host is currently in eval mode so no problem license.

  My host features:

  Dell Poweredge T710

  Processor Intel Xeon E5640 CPU @ 2.67GHZ

  Sockets of Quad Core 2 processors

  Help or direction would be appreciated!  Thank you!

  Just to clarify, went you from 4 vCPUs to 6?  You use Standard Windows.  In my opinion, he has a physical limit of the CPU 4 and you can have the configuration of the VM with 6 virtual Sockets.  If this is the case, change the virtual number of sockets to 1 and the number of cores per socket 6.

• Hard drives not found when you try to install Windows Server 2008

  Hey guys and girls,

  I've spent the last 20 hours, trying to solve the problem of not being able to install windows server 2008 r2 on a new Dell server.

  My configuration is:

  Dell PowerEdge R310

  4 x 1 TB 7.2 K SATA HDD

  Controller Raid PERC H700

  I can't even install the drivers that I downloaded from the Dell support site because Windows Server 2008 Setup will not recognize them.  These factors include the Raid Controller, chipsets Intel, SATA etc.

  I used the settings default, all changed the Auto Off Ports and vica versa, I put the server in Raid and ATA mode with all the possibilities, but it will be will not detect any HD!

  Please help, as it is essential for my health, employment and mental health.

  Best regards

  Sami L.

  What OS?  What RAID controller?  How many discs?  The size?  RAID level?

  I can't assume that everything is the same, especially when you have a different system altogether which does not support the H700 (so the files would have been meaningless even if Dell had not broken links). :)

• Windows Server 2008 windows Firewall is not running and service are not not in services.msc, how do I solve this problem

  as I have found our service of windows windows Server 2008 firewall does not and I checked services.msc and I couldnot find service of windows firewall in the list of services at all. Windows firewall & advance sercurity give error 0x6D9 code. Please let me know how to solve this problem.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• D20 problem of configuration of Windows Server 2008 R2 / 1 x SATA HD / 4 x SATA SSD

  Hi all

  I have a Mod D20. 4155 and want to use next to it is by default SATA HDD SATA SSD four disks of virtual machines. Windows Server 2008 R2 will be the OS with the use of its Hyper-V features.

  I have Aproblem with detection of drives in the configuration of the operating system. All 5 disks are visible in the Marvell controller BIOS setup. It is possible to configure a RAID on the SSD, etc, but I don't "see" any disk in the configuration of the operating system. I tried to load additional drivers in the part of the Setup utility GUI, but it did not work. I tried with the driver Marcell SAS and Intel Matrix driver, both located at http://www-307.ibm.com/pc/support/site.wss/migr-72280.html.

  Suggestions for the BIOS of the PC / BIOS Marvell / OS installation configurations?

  Best regards, Chrischmi

  Hi all

  I found the solution myself. After detection, the default drive is a SATA drive (and), I got the idea to test it on the Intel SATA controller. It was possible to install the spirit of the machine the disks attached to the Intel controller. After installation, I went to Device Manager and installed the driver of Lenovo Marvell, rekindled the Marvell controller disk and started the. Successfully. Yes!

  On my way to the solution, I had another problem: in the setup of Windows GUI part, I got an error of 0 x 80300001 with Lenovo's Intel SATA driver. It was not possible to install windows Server on the SATA drive with reason0x80300001. very helpful post, Microsoft! (-) I decided to use the default Microsoft for the Intel SATA controller driver after a reboot. Installer executed well, but ended with an error 0 x 80070017 and problems of copy of (unknown) files. The solution (found after a few hours...) was to burn a new installation of Windows Server DVD. I don't want to talk about it anymore...

  -Christoph

• Windows Server 2008 R2 installs on ESXi 4

  I have a setup of ESX4 full blown at the headquarters, but we have an ESXi 4 just put us in a remote desktop (thanks to win a bunch of servers because of virtualization in the first place).

  This remote ESXi 4.0 server is for D.R. tests really, but I wanted to test the new DFS on Server 2008 R2 / branch Cache and all that jazz between the two sites.

  The problem is that the Server 2008 R2 will not be installed.  The start screen shows

  File: \windows\system32\boot\winload.exe

  Status: 0xc000035a

  Info: Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

  Well, it's a processor 1.86 GHz Xeon 5120 and according to Intel, it IS 64-bit compatible:

  http://Ark.Intel.com/product.aspx?ID=27215 & Processor = 5120 & Spec-codes = SL9RY, SLABQ, SLAGD

  Heck, the original server COMES with a license for Windows Server 2003 64-bit.

  Is this a limitation with ESXi?  Should we go full blown ESX to run this?  The server is an HP ProLiant DL360 G5 server.

  Thank you!

  I forgot to mention. Enabling hardware virtualization in the BIOS may require a power cycle not only reboot.

• Lab Manager Windows Server 2008

  Hello

  I had a problem with a model of Windows Server 2008. I use Lab Manager to deploy Windows 2008 and I want to do an automatic installation of Active Directory by dcpromo and an answer file. But at the first initialization of Windows 2008, I arrived on the login screen asking me to write the administrator password to activate the administrator account. After this operation, I give by vbs regestry key for automatic logon with the administrator account to start Active Directroy Unattend installation at the next startup.

  I want to cancel this step of password for Windows 2008, I want to activate the account with the default password during deployment of Lab Manager. Any idea?

  Thank you

  We do not like that!

  We create a VC machine on this machine, we install win2008.

  Next, we create a sysprep script (.xlm) and a post script that does the adpromo.

  After that, we make a sysprep on the server and shut it down.

  Then import us the machine virtual Labmanager and unplugged the tag customize.

  When deploy us the virtual machine since the model imported on startup sysprep runs a the machine becommes a Domaincontroller.

  / MatsRob