Server 2008 R2 installation

Similar Questions

• PowerEdge 2600 and Windows Server 2008 R2 installation problem

  Hello.

  I have a Dell PowerEdge 2600 server. Here is the configuration:

  BIOS version: A14

  2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)

  4 x 1 GB of RAM

  2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1

  6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration

  Firmware for the PERC 4/Di 2.52D

  It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.

  Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.

  I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?

  I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.

  Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.

  Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.

  Thanks in advance.

  The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:

  • The 2600's chipset does not support ALL 64-bit processors
    http://Ark.Intel.com/products/27741/Intel-E7501-memory-controller
  • No. 6 systems are supported on 64-bit OS - not all listed here, but the 6600 lists NO 64-bit OS (8 G was the first):
    http://advisors.Dell.com/AgileWeb/iDrivematrixView.aspx
  • 2003 x 64 is not no more, which would be if 64 bits have been supported all the

  You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.

  "2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."

  16-bit applications are not supported in 64-bit operating systems:
  http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx

• Server 2008 R2 installation will not configure on DV7 series laptop

  I installed the Server 2008 R2 on a laptop DV7-7012nr. I upgraded the memory up to 16 GB. I deleted all the partitions, and then divide the hard drive into 2 partitions. Partition 1 is 7 442 Go Windows, Partition 2 is 256 GB server.

  When I install, windows server 2008, in dual boot, it will not complete the configuration for the material. This leaves me the choice either reinstall Windows server 2008 and to come back to the same error or return to windows 7.

  How can I get a dual boot for a full installation of Windows server 2008 R2 Enterprise Edition or Standard on my DV7-7012nr laptop?

  After spending 5 days with installing Server 2008 R2 64-bit on this laptop, I contacted the HP Support. Technical support HP and after 4 hours and 7 different technicians, I was informed that they can not help me with the installation of Server 2008 on this laptop. I know it's possible, and I installed Server 08 several times that I can remember. I'll have to this laptop with the conclusion that although HP says that it will work, it will not return.

  Summary; Windows Server 2008 R2 64-bit Standard or enterprise will not be installed on the HP Pavilion dv7-7012nr laptop.

• 12 c R1 on Windows Server 2008 R2 installation

  Hello

  I had a bad idea - try the new database.

  So:

  (1) oracle DB files download, but the download (lost Wi - Fi - my fault), but the authentication token has expired and I have to redownload the 90%.

  (2) installation of Windows Server 2008 R2 Standard Edition (I want to install the English version, but I had a Russian only)

  (3) spend a lot of time to install and used to install.

  I made a few attempts (each with a new operating system installation):

  with or without UAC, network drive / local, class desktop/server, existing/new user, each editions, the two charset... But all have failed.

  Installation view like this popup errors:

  ' DIM-00019: service to create error '.

  S/O-error: (OS 1387)? ??????? ???????? ??? ??????? ????? ????????? ??????, ??? ??? ?? ?? ??????????. "

  ORA error

  Log file have a lot of useful information, like this:

  "[main] [2013-11-22 17:16:12.449 IS] [KfodUtil.kfodOutput:333] cannot run the program"null\rdbms\bin\kfod.exe": CreateProcess = 2 error,?????

  java.io.IOException: cannot run program "null\rdbms\bin\kfod.exe": CreateProcess = 2 error? ??????? ????? ????????? ????"

  Any ideas what will take for the installation of success?

  He works as installed?

  Interestingly, Oracle has no control of the things

  Date of arrival:

  https://forums.Oracle.com/message/1303404

• Why don't Server 2008 R2 installs?

  Hardware: HP DL380 G7 all up-to-date with firmware HP update.

  Recently decommissioned this server because it was a physical machine of Small Business SERVER 2003. I installed ESXi as I did many times before and tried to create a virtual instance of Windows Server 2008 R2, it arrived at the point of the expansion of the files around 60% and just hangs and eventually crashes? Been trying to figure this out for a few days now and at a loss, I can create an instance of XP no problem, I can install Server 2008 as a physical instance on the hardware without any problems, so it should work to the best of my (limited ESXi) knowledge :/

  No idea as to what could cause this problem?

  Yes, I can create a Windows 7 x 64 machine and a Windows 8 x 64 machine.

  It's very strange and very frustrating as it should be up and running, a week ago, but it just gets worse everytime I try!

• VCenter on Windows Server 2008 R2 installation

  I wonder if there could be problems installing VCenter on Windows Server 2008 R2?  We also manage VMware View in our environment VSphere and plan that upgrade to the latest version.  Anyone experiencing problems with the help of Windows Server 2008 R2 for VCenter?

  We are running the most recent version of vCenter on Windows Server 2008 R2, and he's not going great.

• Windows Server 2008 R2 installs on ESXi 4

  I have a setup of ESX4 full blown at the headquarters, but we have an ESXi 4 just put us in a remote desktop (thanks to win a bunch of servers because of virtualization in the first place).

  This remote ESXi 4.0 server is for D.R. tests really, but I wanted to test the new DFS on Server 2008 R2 / branch Cache and all that jazz between the two sites.

  The problem is that the Server 2008 R2 will not be installed.  The start screen shows

  File: \windows\system32\boot\winload.exe

  Status: 0xc000035a

  Info: Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

  Well, it's a processor 1.86 GHz Xeon 5120 and according to Intel, it IS 64-bit compatible:

  http://Ark.Intel.com/product.aspx?ID=27215 & Processor = 5120 & Spec-codes = SL9RY, SLABQ, SLAGD

  Heck, the original server COMES with a license for Windows Server 2003 64-bit.

  Is this a limitation with ESXi?  Should we go full blown ESX to run this?  The server is an HP ProLiant DL360 G5 server.

  Thank you!

  I forgot to mention. Enabling hardware virtualization in the BIOS may require a power cycle not only reboot.

• How to: install Windows Server 2008 R2 (64-bit) in ESXi 4.1 - 260247 with controller 'LSI Logic SAS'?

  Hello

  I have a newly installed ESXi 4.1 - 260247 on a Fujitsu - Siemens GROUND RX300 S4 with 2 x Intel Xeon E5420 @ 2.5 GHz with 36 GB of RAM.

  Storage controller is a LSI MegaRAID SAS 1078 6 x 750 GB SATA - drives configured with 3xRAID-1 logical drives. BIOS Version 4.06 Rev 1.04.2519

  Now, I'm trying to install "Microsoft Windows Server 2008 R2 64-bit" in a virtual machine, but fail because the virtual hard disk cannot be found.

  I tried with all Types of SCSI controller, but when running of the "Create Virtual Machine"-magician, he suggests 'LSI Logic SAS'. "." I tried 'LSI Logic parallel' and "VMware Paravirtual" but it did not work. However, I have not tried "Parallel BusLogic", since it clearly says no "recommended for this guest operating system".

  I was unable to find documentation on how and where I can find the "LSI Logic SAS" - pilot to be able to continue the installation. The

  Windows Server 2008 R2 installation is an ISO obtained directly from Microsoft eLicensing.

  I also downloaded the drivers floppy 'pvscsi - Windows2008.flp' and 'vmscsi.flp' from the ESXi server, but the program finds no driver validates the installation of Windows on them.

  I also extracted files "windows.iso' of the ESXi machine, but not drivers there as well.

  So my question is, what model is the "LSI Logic SAS", I guess I can download these LSI directly, I need to know what model?

  Any help appreciated.

  Thank you!

  Kind regards

  Christian

  chrkad,

  I think you have the same problem I had.   Trying to install 2008 R2 and asked for drivers?

  The issue wound up being an ISO corrupt Ms.

  Try to download the ISO using the java-based download manager.  This will tell you if your download is getting disturbed, as mine was.  It will also be the image once completed to ensure you've got the whole thing of checksum.  Just download via HTTP does not.

  I found myself in download the image of the House and burn a DVD and realize that the back of the office,

• Windows Server 2008 R2 problem

  Hello

  I am a newbie to Flash media server and I want to study its use.

  Does anyone have experience with Flash Media Server 3.5.3 running on Windows Server 2008 R2? I installed FMS on my Windows Server 2008 R2, but cannot start the administration console.

  Furthermore, I installed FMS on a 32-bit Windows Server 2003 computer. And I am able to use the administration console on the 2003 server to connect to the Server 2008 R2 installation.

  Also, I have a full disc that is used to contain the content of the media streaming via FMS. How can I configure FMS using this drive as root for multimedia file instead of using "c:\program files (x86)\...\webroot\vod.

  Thanks a lot for helping me start the project.

  Best regards

  Steve Yau

  1 as you say rightly first of all it is not question FMS as you can connect to the server administration through another machine. So probably his Win 2008 or IE or some Flash question - don't have much idea about it.

  2. you can use VideoPlayer.html present in samples C\Program Files (x 86) folder \Flash Media Server 3.5\samples\videoPlayer. "Put the URL correct example" rtmp://myIPAddress/vod/myfile.flv (where myfile.flv is placed in D:\myMediaFiles)

  Try and let me know.

• Failed Installation of Windows Server 2008.

  Hey,.

  I recently tried to install Windows Server 2008 on ESXi 4.0.0 (revision 1).

  The installation went all the way until they have to 'Finish installation', how come wrong stop installation.

  "Setup.exe - bad image".

  

  After that, another windows came up saying that windows could not be configured for use on the hardware in my server.

  Could someone advise me to solve this?

  Thank you.

  Oliver.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• When will install Server 2008 Windows OS. Error Msg 0 x coming 80070070: "do not have enough space for the installation..." Even if I have 20 GB of space? Pls solve this problem immediately.

  When will install Server 2008 Windows OS. Error Msg 0 x coming 80070070: "do not have enough space for the installation..." Even if I have 20 GB of space? Pls solve this problem immediately.

  Hey Shiva,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=windowsserver2008r2general

  Please do not hesitate to contact us if you have other questions related to Windows.

• Windows Server 2008 Installation on server.

  I try several time to install Windows server 2008 on the server, but it cannot run the installation process.

  But when I try to install the software on a PC... It installs successfully. Are there measures to set up the process starts...

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows server 2008 standard key can be applied on windows server 2008 R2 standard assessment installation?

  Windows server 2008 standard key can be applied on windows server 2008 R2 standard assessment installation?

  Thank you
  Tony

  Original title: windows server 2008 key

  Hello

  Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.

• I can't find the link to download the program installation of SQL Server 2008 R2 or disk image

  Hello

  I'm trying to find the image disk or self-extracting installer of SQL Server 2008 R2 Evaluation Version. Would be nice if someone gave me the link.

  Hello

  Your question is beyond the scope of these forums.

  Please ask this question in the following forums.

  Category of the SQL Server:

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  Concerning

• Installation of Windows Server 2008 R2

  Installation of Windows Server 2008 R2 on a server without an operating system present.  Get an error 0 x 80070017.  What is the cause?  It is a new server.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/