Server Apple ID does not

Similar Questions

• Firewall Server 10.5 does not

  Sorry for the double post, but the forum 10.5 server seems to be dead - I hope that someone here has a clue about these things.

  *****************************************************************************

  I'm trying to set up a firewall for my 10.5 server, but I can't seem to make it work. The main goal is to try to stop brute force constant mail connection attempts.

  To this end, I installed fail2ban, to identify and prohibit connection failures. Most of the time it works, that is to say the mechanics submit banned IP addresses and send me an email for this purpose is accomplished. If I start a terminal session, I receive dozens of IPS listed with the following command:

  sudo ipfw list

  With an entry similar to:

  12345 tcp refuse to 123.123.23.123 any in

  But the ban is not only effective - the same IP address will try again later, sometimes every few seconds for hours

  When I check the log of fail2ban, he complains (after that that it has detected a malicious connection repeatedly attempt):

  '[Sasl-ipfw] 123.123.123.123 WARNING already banned '.

  I tried the prohibition of formatting in different ways:

  12345 tcp refuse to 123.123.23.123 to 127.0.0.1 dst-port 25

  12345 tcp refuse to 123.123.23.123 to 192.168.123.123 dst-port 25

  But simply do not make any difference. I even tried just a ban on local network for the web service:

  12345 tcp refuse to 192.168.123.122 to 192.168.123.123 dst-port 80

  But again, which has no effect. Other rules, seem to be by default, in the eyes of IPFW list as:

  12300 allow the newspaper logamount 1000 tcp from any to any established

  12301 allow the newspaper logamount 1000 tcp from one to one of

  12302 allow the newspaper logamount 1000 tcp from any dst-port 22...

  and a final settlement in the list (which I've read somewhere not editable):

  allow 65535 ip at all

  App server admin shows that the firewall service is running, there is no ads of 'decline' the newspaper of ipfw. The inputs patched in to fail2ban IPFW appear not in the Admin Server Anywhere entries, nor in the files ipfw.conf or ipfw.conf.apple (so I don't know where they are stored). But I see them when I me 'ipfw list' in the terminal and they are listed in the "Active rules" tab of the firewall section in admin server.

  Thanks for any help on this matter.

  Post edited by: Clive Bruton - formatting messed up!

  This problem is solved, see:

  Firewall Server 10.5 does not

• WiFi and apple tv does not connect for Colocation

  WiFi and apple tv does not connect for home sharing

  Please give more details about your configuration, the version of the Apple TV and software, home sharing server, etc. Others here know much more about it as I have, but they will need a clear description of the problem. You can also try to search for this site for home, sharing problems and take a look at any recent threads that you present to.

  You use the same Apple ID everywhere? ATV currently sems to have problems with Apple improved authentication protocols, so I hope they are not turned on for your Apple ID. You have enabled sharing House in configuration of the ATV?

• Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Hey there Scotchman2926,

  I understand that you are experiencing some problems with Apple music on Sierra. I have a few suggestions to help you solve this problem. First of all, if you are unable to access the iTunes Store as well as music from Apple, use the information in this article to help resolve this problem:
  

  If you cannot connect to the iTunes Store - Apple Support

  If this does not resolve the problem, you might try signing out of your Apple ID in iTunes and then connect again.

  Thanks to be come to the communities of Apple Support and let us know how it goes.

  See you soon.

• Unlock with Apple Watch does not

  Hello

  I'm running a MacBook Air mid-2013 with macOS Sierra, with a 2nd Gen Apple Watch watchOS3 running. I'm on the same Apple for my Air ID, see and iPhone (6 s).

  But unlock with Apple Watch does not work on my Air. I activated 2 factor authentication. I checked the box that allows to unlock with Apple Watch. Everything seems to be kosher.

  When I close and reopen my Air, "Unlock with Apple Watch" appears for about 10 seconds, and then I type my password.

  Help? Thank you!

  I also have this problem. I have 2 accounts on my Macbook. One is the first account that I don't use, second my regular account. On my Second account, it of the same problem, but with the Admin account... It works.

  I Don t know why.

  Do you use also two accounts?

• Apple Watch does not appear in the security/privacy settings my mac (2015)

  Apple Watch does not appear in the security/privacy settings unlock my mac (2015) for auto

  Hi abcd_bruce,

  Thanks for stopping by Apple Support communities. I understand that you are eager to implement the feature Auto Unlock on your MacBook Pro. It is a new system and I'll be happy to help you with this.

  Looks like you did a few steps already to help lift this step. In this article, automatically unlock your Mac with your Apple Watch, he goes over all the steps that must be done to implement this place. If you already followed all these steps and are still problems, then the next step would be to start the Mac in safemode, and then check if you are able to see the Apple Watch see the implementation of the security and privacy preferences.

  Try safe mode if your Mac does not end commissioning

  Have a good night!

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• Apple pencil does not work after update to iOS 9.3.4?

  My Apple pencil does not work after installing iOS 9.3.4, I tried to forget this device and it Peel again. No change, it still fails. Any fix for that?

  Never mind y ' All, I reset my iPad Pro and all works fine now. Weird, but as long as it works all is good

• My Apple music does not work it takes me to the application once I click on a song it will break the app

  My Apple music does not work it takes me to the application once I click on a song it will break the app

  I had to factory reset my phone twice. So once when I graded down to beta 10 to 9.3.2. One then once more and then my music application has started working again. I hope this helps.

• Apple ID does not work after software update

  upgrade my iPhone to iOS 9.3 and my Apple ID does not work and I can't activate the phone... I'm the only person who has used this phone... not a second by hand, it please help

  and stop assuming that all users who have this problem aren't the first users

  What happens when you try to use the Apple ID, so you think not the right pair?

• 4th generation Apple tv does not see my Apple bluetooth keyboard

  I go into the settings on my Apple TV > Bluetooth and it just sits there looking.  I can't do gets my apple keyboard is displayed.  I can associate the keyboard very well with my phone.

  The 4th generation Apple TV does not support Bluetooth keyboards.

  Use the Bluetooth with your Apple TV accessories (4th generation) - Apple Support

  There are a lot of devices and accessories that you can pair with your Apple TV, as Bluetooth headphones, speakers, and game controllers. Some devices including Bluetooth keyboards are not compatible.

  
  

  A future update is supposed to bring this functionality to the 4th generation Apple Tv.

• Apple TV does not recognize the ID or password

  Apple tv does not recognize the ID or password.  How should I do?

  I had this problem too with the Apple TV v2. I contacted apple support and they advised me to go to id.apple.com and login and turn off validation in two steps. Then go and setup of the Apple TV. Once completed, re - simply activate two-step verification. It's a real pain to do, but it worked for me.

• Why Apple cards does not work in Saudi Arabia?

  Why Apple cards does not work in Saudi Arabia?

  Hi msmadi,

  I understand you are trying to use cards for Apple in Saudi Arabia, but faced problems. I don't know what questions you are running, but if you want to use a specific feature, it may not be available here. Take a look at the link below to review what features are available with an iOS device using iOS 9.

  iOS 9 feature availability
  http://www.Apple.com/iOS/feature-availability/

  Nice day

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear

  My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear

  Hello

  It is not possible to disable Apple Watch when its on the charger and connected to the power supply - this is normal.