SERVER BLADE with 96 GB of RAM

Similar Questions

• I have a set of software for Windows Server 2008 with SP1 32-bit?

  My office is running: Windows Server 2008 with Service Pack 1 32-bit.

  AMD Athlon II 640 (Quad Core) 3.2 Ghz

  Installed memory: 3 GB RAM DDR2

  1 Gb integrated graphics.

  NOW!.

  My motherboard: DKA 790GX Platinum. Micro Star International.

  My hardware and everything would be compatible for the server operating system?

  audio device: installed

  Install: network (LAN) Interface Card,.

  Wireless NOTHING: installed.

  For assistance, please ask for help in the appropriate Microsoft TechNet Windows Server Forum.

  
  Thank you & good luck.

• Reference Dell R310 Server Blade not start CD ROM [FRESH WINDOWS SETUP]

  Hello

  I have a Server Blade Dell R310. I created the virtual disk on a Raid Configuration, also I updated the BIOS boot.

  I PERC S100 when I checked on my configuration tab.

  The scenario is that I want to install a new / new copy of Windows 2008 R2 on this server, I have the dvd bootable. but when I put it on the drive it says "No Bootable Media found" something like that.

  Y at - it all the configurations that I missed? hoping to get answers from here.

  Kind regards!

  OK, let's back up a bit:

  Use the management tools of systems and Documentation (GDPS) instead of SBUU.  If you use SBUU with 2008R2, you should use the Driver Pack too... MUCH easier to use the GDPS, which has everything you need in there:

  FTP (you will need to copy/paste - forums do not like the FTP links):

  FTP://FTP.Dell.com/secure/FOLDER01538030M/1/OM_SMTD_730_A00.ISO

  Yes, you start on GDPS, follow the instructions, and then insert the 2008R2 media when prompted.

• Diplay problem with WINDOWS7 on INTEL DDR1 Board with 1 GB of RAM... Help, please

  my monitor is 1366 x 768 resolution and my Board is intel DDR1 with 1 GB of ram and 500 GB of disk... Im not able to have the display resolution greater than 1024 x 768... so im using XP that served as a solution to my problem, but I want to have Win7 on my system with a resolution of 1366 x 768... What to do... Help me please...

  You can get a resolution that is supported by your graphics device/driver.

  1 GB is the minimum required for win7 so I guess you have an old or very basic system

  What is the make and model of PC or if a generic desktop computer the exact motherboard model?

• IP address of server blades management

  Hello

  Could someone please help me know which path is followed to reach the ip addresses of the server blade chassis management? To be more precise, to say that I have the management interfaces of interconnections connected to the switch network management of my fabric. When I ping addresses it ip of the blades, that ping through the management interface of the FIs management? Can I assign different subnet IP subnet Management Server as the FI management interfaces?

  Also, could someone share a document illustrating this architecture?

  Thank you

  Quesnel

  Hi Quesnel

  Let's be very clear: IP address management blade = IP address of the MMIC, you can for example. access by the KVM.

  There are 2 modes:

  - out of band which is accessible on port 1 G of the interconnection of fabric management

  - in the band which is accessible via a fabric interconnect 10 G uplink interface

  See the discussion in

  https://supportforums.Cisco.com/discussion/12185011/management-blades-OU...

  Management in-band MMIC

  A determinant to provide access management in-band for integrated management Cisco (CIMC) controller is the desire to separate traffic treated tenant provider cloud for service provider deployments shared, public or private. Out of band (OOB) management traffic is at the fabric of interconnections and cross management via the management port. This has the potential to cause bottlenecks and affect the bandwidth of the processor in the management ports.

  In-band management allows MMIC traffic to take the same path as the data traffic into and out of the fabric of interconnections via the uplink ports. The highest bandwidth available to the uplink ports means that inband access greatly accelerates the management traffic and reduced risk of bottlenecks and the stress of CPU. When out of band (OOB) and inband address pools can be configured for access to the administration in Cisco's UCS Manager. Out-of-band access only supports IPv4 addresses. Access inband supports IPv4 addresses and IPv6, which allows a management single or double stack.

  The two addresses of OOB management interface that can be configured in Cisco UCS Manager blade and rack servers are:

  • An OOB IPv4 address assigned to the physical server via the pool global ext-mgmt
  • An address IPv4 OOB derived from a service associated with the physical server profile

  In addition, up to four inband management interface addresses can be configured:

  • A tape attributed to the physical server IPv4 address
  • An IPv4 address of inband derived from a service associated with the physical server profile
  • An IPv6 address band attributed to the physical server
  • An IPv6 address of inband derived from a service associated with the physical server profile

  Several in-band for each server management IP addresses take additional sessions of CIMC. When you configure the OOB, and strip addresses, users can choose from a list of these addresses in the KVM Console dialog box when they launch KVM from a server, SSH to the ground, a service profile, the KVM Launch Manager or Cisco UCS Manager GUI web URL.

  MMIC inband access supports the following services:

  • KVM console

  • SSH to MMIC for soil

  • vMedia of ISO, virtual CD/DVD, removable disk, floppy drive

  Note	Only Cisco UCS M3 and M4 servers support access in-band MMIC. Access Inband MMIC for Cisco UCS M1 and M2 servers is not supported.

• Server Blade ASYNC / threshold of passage / hardware verification

  Hey people,

  strange things occur yesterday evening. I bypassed about 120 messages "threshold crossed: CAW: etherTxStats...» "and"IO Module Warning.

  I looked in the events of UCSM. Each server blade in our UCS started a WSF. What is a routine of UCS? We do not know what is happening. All the 32 ESXi 5.5 blade server. It has not changed anything.

  Events of WSF see attached file. I have filtered all the events of 'jumps '. To me, it seems that MMIC began the new inventory for all servers? Do you know something about this or have the same events? Is there a scheduled task internal UCS?

  UCS version 2.2 (3f) (all systems = same beam of firmware; UCSM, FIs, blades...)

  Thank you very much

  / Hugo

  It would be interesting to have a look at the audit logs around that time and DME (data base management Enginer) to see what is really happening... You better open a case of TAC and then post the result here for future users faced with the same question it will require a deep investigation of the newspapers before we a tell you what/why he happeed.

  -Kenny

• Calendar Server responds with 403 Forbidden' operation CalDAVWriteEntityQueueableOperation.

  With the latest version of Mac server (5.1.5 on OS X 10.11.6), when I try to migrate a large calendar via a client computer, it takes a long time and then I get an endless series of

  The server responds with an error.

  Access to the "[name of the cal event]' in '[the calendar name]' account"[account name]"is not allowed.

  The server responded:

  "HTTP/1.1 403 Forbidden.

  operating CalDAVWriteEntityQueueableOperation.

  [Go offline]  [Back to the server.

  errors.  I have to leave something heavy press enter for a few hours to get rid of all the errors.

  Migration of the small calendars to the server (by importing data in iCal on the calendar of the hosted account) works for most (it may be a mistake or 2).

  I found a suggestion of years ago on another Board that permissions can be screwed to the top and use this Terminal command:

  sudo chown-r _calendar:_calendar/Library/CalendarServer/Documents

  However, this suggestion was for the 10.6 Server and may no longer apply.

  Any thoughts?

  Today, I had the idea of trying to download the calendar from the same computer that is serving the calendars.  Should be faster and better (and the same OS!)!

  So, an account on it hosting Mac and started the import process, which seemed to go more smoothly, but then seemed the same thing happening: most of the CPU has been get taken up with various activities related to the calendar and then after a while, it started spitting out errors, but they were slightly different.  There are too many mistakes all move just above.  Also, try to add more events to this calendar also fails.

  Now, they say:

  The event "[name of event]" was rejected by '[Server]' because the maximum number of resources has been reached.

  Is there a limit to the size if a calendar?

  I do something wrong or is this a limit of the software?

• I have a late 2008 aluminium MacBook El Capitan 10.11.6 running. The cam to computer with 2 GB of ram and the instructions say there is a maximum of 4 GB. This ceiling is still valid or if I add 8 GB?

  I have a late 2008 aluminium MacBook El Capitan 10.11.6 running. The computer came with 2 GB of ram and the instructions say that there is a maximum of 4 GB. This ceiling is still valid or if I add 8 GB?

  Yes, your MacBook accepts two RAM sticks of 4 GB, 8 GB total, you'd better update the firmware Version MB51.007D.B03.

  y-13-non-pro-how-to-upgrade-ram.html http://www.EveryMac.com/systems/Apple/MacBook/MacBook-unibody-FAQ/MacBook-unibod

• Power supply for my P7-1410 with 16 GB of RAM

  Hello

  I installed my new GEFORCE GTX650 video card in my HP Pavilion P7 1410 with 16 GB of RAM.  Is it my PC to handle the EVGA-SuperNOVA NEX750B 750W power supply?  Is this too much for this model?

  Thank you

  WND

  Hello

  You may need to use a shoehorn so he can adapt.  The physical dimensions of a standard power SUPPLY HP block is 5,9 "x5.5"x3.4. The Corsair CX600 or CX500 would be better physical shape.  Some of the older PC HP lights with blocks of power more than 650 watts.

• I have a model end of 2013 13 MacBook Pro with 4 GB or RAM retina and think to upgrade to El Capitan. Is this enough RAM

  I have a model end of 2013 13 MacBook Pro with 4 GB or RAM retina and think to upgrade to El Capitan. Is this enough RAM

  Of course you can upgrade to El Capitan. But I think better if you can change the internal hard drive (SATA drive) in the SSD drive. You will get better results, faster than still, you only have 4 GB. This is mine... MacBook pro in early 2011.

  

• Satellite Pro 2100 - works does not with 2 sticks of RAM

  Hi all

  I've been with sticks of 2 x 512 MB RAM from a reliable supplier that reassures me that this RAM is compatible with the SP2100 laptop.

  With the two sticks installed, as soon as the machine is running, I get no display and 5 beeps (1 long, a follow-up of 4 short beeps). Each stick of RAM work well individually, and I also tested slot A and b. Thus, the 2 sticks of RAM are working alone and work the two slots. It seems that this machine has a problem with 2 sticks of RAM.

  The ACPI BIOS is up to date (v1.40). I also tried the old 256 MB stick with one of the new sticks of 512 MB - same problem. I tried this as the supplier of memory mentioned this Toshiba may take only 1 GB maximum.

  Any ideas why two sticks of RAM does not work?

  Thanks in advance and amicably.

  James

  Hello

  You are right. The laptop must be able to manage memory 1024Mo. (2 x 512 MB)
  Due to your description, I think that both modules are compatible, but cannot play together.
  In my opinion, you should use two modules with the same specifications

  Try to use the modules recommended by Toshiba;
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

• Can I put my L750-11W Satellite with 16 GB of RAM?

  I saw written in Intel website that my i3-2310 can cope with 16 GB ddr3 1333 mhz RAM, but on the Toshiba site, they say that the max ram is 8 GB, so my question is:

  Is it possible that my laptop can e improved (installed) 8 GB 16 GB?

  Upgrade of RAM depends on mainboard support and no CPU support.
  Your laptop can handle with 8 GB of RAM only, and you can't improve it with 16 GB.

• Satellite L30 - BSOD with 2 GB of RAM

  Hi all

  I have some problems, I can not explain on my * PSL33E L30 *. I bought 2 GB of RAM to put in it, but it makes Windows crashes (BSOD). I already tested memories, they all work alone. Of course they have all the right tip.
  Is there something to change in the BIOS or something?

  Thank you.

  Hey Buddy,

  If you get a BSOD with 2 GB of RAM, it seems that the modules are not compatible to your laptop in dual channel mode.

  I m not a technician but I mean that's the only possible reason because you wrote that they all work opportunity so they are not defective.

  I put t know which modules you bought, but you should test the other modules. I have good experiences with the Kingston memory modules.

• 5200-903-this satellite that is possible to equip it with 2 GB of RAM

  I have a question about RAM fitted to a Toshiba Satellite 5200 903.
  Is it possible to equip with 2 GB of RAM?

  I already tried, but Windows XP Pro not more start telling me that the BIOS (1.40) is not ACPI compliant. (with blue screen)
  but with 1 GB of RAM (1 Bank), it runs without quarrels...
  Or is the BIOS-based issue.

  I read in some forums that he is supposed to take up to 2048 MB (2 GB) of RAM...

  I use a Kingston ValueRAM (2x1GB)

  Hello

  According to Toshiba, you can use a maximum of 1 GB of RAM.
  But I know that sometimes a laptop no longer accepts that. Maybe it's the associated BIOS.

  Good bye

• the new iMac can run with 64 MB of ram?

  Other World Computing the new iMac end of 2015 which can operate with 64 MB of ram. Is this true, and is this safe?

  It can be used with 64 GB of RAM. Gigabytes and megabytes are not the same.

  (139884)