Server configuration for APEX 3.1.2 in 10 g XE

Similar Questions

• Advice on the implementation of a server HTTP for APEX

  Hi Experts,
  
  I am very busy to configure an application in the APEX, and we are about to deploy it on our production servers.
  
  Side database is fine, but I have a few questions on the HTTP server.
  (I just trained as an engineer, working with databases for a few years but the world of HTTP is fairly new for me).
  
  
  -What is the best option for the HTTP Server?
  I tested autonomous apex_listener now and under Server GlassFish.
  
  
  When we move to production, I'm looking at:
  -max 10 concurrent users
  -windows 2003-based Web server
  -APEX 4.1
  -oracle 10.2
  
  
  -Once we have installed the APEX on the database server, we keep the apex available files, or can I just remove?
  (I know I need the file apex\images on the Web server).

  Hi JP,

  -What is the best option for the HTTP Server?
  I tested autonomous apex_listener now and under Server GlassFish.

  The stand-alone mode is intended to be used for development/testing purposes only. If you are considering a production deployment, use a server JEE 'full share '. GlassFish is an option. If it is the one that you want depends on your production and your previous experiences with JEE servers scenario. You will get a complete list of all the servers JEE with support in the section of the Setup Guide requirements.

  -Once we have installed the APEX on the database server, we keep the apex available files, or can I just remove?
  (I know I need the file apex\images on the Web server).

  You can simply delete the installation package, but you might want to keep some files for the tasks of maintenance and development, for example apxchpwd.sql in order to reset the password for the internal ADMIN of the APEX and the content apex\utilities if you need to reset the image prefix or use APEX based on java to export to export the line of command/script function (multiple) APEX applications.

  -Udo

• Server configuration for access outside a LAN EBS 11i

  Hi all
  
  I have Oracle Apps 11.5.10.2 running on a Windows 2003 SP2 OS Server, behind a wireless router.
  
  I am able to access within the network, but I can't connect to the server from an IP address outside of my wireless network. Please let me know how to set up my wireless router /apps server allowing access to users outside the network.
  
  I use a Linksys WRT150N wireless router. I have configured the IP address of the server to be static.
  
  
  Thank you
  RK

  Hello

  Please let me know how to set up my wireless router /apps server allowing access to users outside the network.

  Please refer to (Note: 287176.1 - DMZ Configuration with Oracle E-Business Suite 11i).

  Kind regards
  Hussein

• Solution for Bluetooth PAN server configuration

  Task:
  -Internet on Bluetooth PAN profile
  -Connection for laptop (Toshiba Satellite A300 1 2 (WinXP SP2) with Sony Ericsson K810i with BT PAN)
  -Computer as a server of PAN (!). Lance PAN Mobile phone connection-> computer.
  You can use internet to mobile phone to laptop.

  But it's bug in Toshiba PAN-server - right click doesn't work in pan-Server tray :( (Local Russian (?))

  * Configuration server PAN *.
  1. options:
  set of 2 boxes in the Bluetooth dialog options (service of pan, pan DHCP service), the [ok] button
  2. Press win - r, type: cmd
  [ok]
  Enter (case sensitivity "") ":"
  CD "c:\Program Files Toshiba Stack\"
  TosBtPSS.exe /END
  TosBtPSS.exe /NAP

  If it is absent pan server in the status bar - check your network connection BTPAN (Bluetooth Personal Area Network) enabled in the control panel and try
  TosBtPSS.exe /NAP

  ((3 set the IP address for the network BTPAN connectivity: 192.168.0.1 (I don't know how Toshiba DHCP server works, but it works!)))
  You can use your own DHCP server configured...

  You can make these instructions batch file...

  Sorry, my bad English)

  P.S. to the developer of Bluetooth PAN server: fixed a bug, please)

  Thanks for this interesting article.

• Try to connect to the network, get a msg "the server is not configured for transactions.

  I have a desktop running Vista Professional (SP2) and a laptop running XP Professional (SP3). They are connected by a WiFi network, the Desktp acting as a server. Everything worked well until the Office had a problem and had to have re-installed Windows. Now, although the Office can find the laptop, the laptop can not find the office or its working group. I get a message " is not accessible. You might not have permission to use this network resource. Contact the server administrator to find out if you have access permissions. The server is not configured for transactions. »

  • But once, for about five minutes, it worked - and then stopped again. For no apparent reason.
  • If I connect with an Ethernet cable and no WiFi machines, the last sentence of this message changes to "the list of servers of this working group is currently unavailable."
  • When you run the Configuration Wizard from the network on the laptop, he told me that I have to run the Wizard "on each of the computers on your network. To run the wizard on computers running XP, you can use the Windows XP CD or a network setup disk". I was not able to do so - the XP disc I have does not behave as indicated by the wizard and the wizard does not recognize my CD - RW drive to create a network setup disk.

  Can anyone help?

  Well, who has not responded to my problem, but it was eventually fixed by a support guy with the company who sold me the desktop PC. As I understand it, it was a problem of file sharing. Seems he had to undo sharing all my records on the desktop, then re - share once again, since when I did not have this particular problem. But it's obviously not ideal (in MS eyes at least) to the network of computers with different operating systems.

• Activate connections encrypted for the database engine (SQL Server Configuration Manager)

  Hi team,

  I have a quick question, on the protocols for properties of SQL. Option:

  SQL Server Configuration Manager > SQL Server Network Configuration > Protocol for SQL_xxx (right click) > properties, we can see two tabs:

  Tab 1: flags

  Tab 2: certificate

  If I put the value of Instance of hide = Yes, 'Force Enctyption', the fact must be set to YES as well?

  Or Enctyption of the Force must be activated in order to hide the instance?

  What is recommend settings?

  I can see there are good article, but would appreciate if a response.

  https://msdn.Microsoft.com/en-us/library/ms191192.aspx

  Thank you

  + Moin

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Cisco Catalyst 2960-S switch configured for 802. 1 x sends a query to access the Radius Server Radius

  Setup

  Cisco Catalyst 2960-S running 15.0.2 - SE8

  Under Centos freeRadius 6.4 RADIUS server

  Client (supplicant) running Windows 7

  When Windows client is connected to the port (port 12 in my setup) with authentication of 802. 1 x active switch, show of Wireshark that catalyst sends ask EAP and the client responds with EAP response. But it made not the request to the Radius server. The RADIUS test utility 'aaa RADIUS testuser password new-code test group' works.
  Here is my config running. Any advice would be greatly appreciated.
  #show running mySwitch-
  mySwitch #show running-config
  Building configuration...

  Current configuration: 2094 bytes
  !
  version 12.2
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname myswitch
  !
  boot-start-marker
  boot-end-marker
  !
  activate the password secret 5 $1$ Z1z6$ kqvVYRQdVRZ0h8aDTV5DR0 enable password!
  !
  !
  AAA new-model
  !
  !
  AAA dot1x group group radius aaa accounting dot1x default start-stop radius authentication group!
  !
  !
  AAA - the id of the joint session
  1 supply ws-c2960s-24ts-l switch
  !
  !
  !
  !
  !
  control-dot1x system-auth
  pvst spanning-tree mode
  spanning tree extend id-system
  !
  !
  !
  !
  internal allocation policy of VLAN no ascendant interface FastEthernet0 no stop ip address!
  GigabitEthernet1/0/1 interface
  !
  interface GigabitEthernet1/0/2
  !
  interface GigabitEthernet1/0/3
  !
  interface GigabitEthernet1/0/4
  !
  interface GigabitEthernet1/0/5
  !
  interface GigabitEthernet1/0/6
  !
  interface GigabitEthernet1/0/7
  !
  interface GigabitEthernet1/0/8
  !
  interface GigabitEthernet1/0/9
  !
  interface GigabitEthernet1/0/10
  !
  interface GigabitEthernet1/0/11
  !
  interface GigabitEthernet1/0/12
  switchport mode access
  Auto control of the port of authentication
  dot1x EAP authenticator
  !
  interface GigabitEthernet1/0/13
  !
  interface GigabitEthernet1/0/14
  !
  interface GigabitEthernet1/0/15
  !
  interface GigabitEthernet1/0/16
  !
  interface GigabitEthernet1/0/17
  !
  interface GigabitEthernet1/0/18
  !
  interface GigabitEthernet1/0/19
  !
  interface GigabitEthernet1/0/20
  !
  interface GigabitEthernet1/0/21
  !
  interface GigabitEthernet1/0/22
  !
  interface GigabitEthernet1/0/23
  !
  interface GigabitEthernet1/0/24
  !
  interface GigabitEthernet1/0/25
  !
  interface GigabitEthernet1/0/26
  !
  interface GigabitEthernet1/0/27
  !
  interface GigabitEthernet1/0/28
  !
  interface Vlan1
  IP 10.1.2.12 255.255.255.0
  !
  IP http server
  IP http secure server
  activate the IP sla response alerts
  recording of debug trap
  10.1.2.1 host connection tcp port 514 RADIUS-server host 10.1.2.1 transport auth-port 1812 acct-port 1646 timeout 3 retransmit testing123 key 3.
  Line con 0
  line vty 0 4
  password password
  line vty 5 15
  password password
  !
  end

  interface GigabitEthernet1/0/16
  !
  interface GigabitEthernet1/0/17
  !
  interface GigabitEthernet1/0/18
  !
  interface GigabitEthernet1/0/19
  !
  interface GigabitEthernet1/0/20

  Have you run wireshark on the server because the request to switch? If so you make sure that there is a response from the server? For Windows network POLICY Server (I've never tried Centos), you must ensure that the request is related to a policy which then authenticates, or denies access. Usually, it is a matter of such attributes and the seller.

  Regarding the configuration, it seems a bit out of the AAA. Try to remove the:

  line "aaa dot1x group service radius authentication" and this by using instead:

  "aaa dot1x default radius authentication group". After the dot1x word you are supposed to provide a list of the authentication or the default Word if you do not want to use a list.

• Configuration for the Exchange Server issue

  I have a question on an Exchange Server, I noticed that one of my Exchange servers has 4 partitions spanning 2 hard drives and a parition of M which is 55GO, but that does not appear in disk management. M partition contains the domain folder, the mailbox databases are on the D: drive. How will I know how much I really voicemails of disk space? And this configuration is supported?

  Chris

  The "M" 'virtual' drive that resides on Exchange (55 additional GB, its representation is not just messages of real exchange located on who will drive you have configured for the mail store).

  Another pattern on this drive "M":

  The default for this reader is the reader of 'm', but if you manually created a "M" drive before installing Exchange will change to another drive available. It is now recommended to 'disable' this disc.

  Run the "Best Practices Analyzer Tool" on the Exchange Server and it will find any question you should change. To turn off virtual drive is one he'll find and indicate what registry entry to change:

  http://www.Microsoft.com/technet/prodtechnol/exchange/downloads/2003/analyzers/default.mspx

• Autonomous AP521 can be configured for authentication WPA/TKIP with no radius server?

  The AP521 can be configured for authentication WPA/TKIP with no radius server?

  the datasheet, wpa with tkip and wpa2 with aes are supported.

  you want to use (no RADIUS) wpa - psk with tkip. WPA2-psk aes and tkip not use.

• How to find the type of Web server is configured for use with ColdFusion

  Hello

  Where can I check to see what kind of server that ColdFusion is configured to run currently? I have an existing CF installation 9.0.1, which I'll be removing and installing CF 9.0.2. During the instalation of the 9.0.2 version I would need to specify the server to use - Server ColdFusion / Apache / IIS etc. My question is, where I see in CF 9.0.1 existing to understand the server that is currently being used.

  Thank you!

  You can use the Web Server Configuration tool. Assuming you are on Windows, the path to start is generally

  Start-online programs-online Adobe-ColdFusion 9 online-online Configuratiol tool for the Web server

  In fact, you can use this tool to add or remove web servers.

• PDF has not been configured for this web server-2008 Server

  Hello
  
  Try to open a report in preview PDF in the workspace and get the error "" PDF has not been configured for this web server ".
  I use a 32-bit server and hyperion 2008 11.1.1.4...
  I already installed Ghostscript 8.51 in my server...
  
  Thank you

  Yes, I got the solutions... .i need to run the HRprinters.exe then I restart EN and pool services

• Apex Application listener is recommended for Apex HTTP Server?

  Hello
  
  I'm trying trying to choose between Apex application express listener to Oracle HTTP server and install mod_plsql for apex 4.0.
  
  Is Apex express ppplication listener is the recommended?
  
  Thank you.
  Ali

  Yes, that's for sure, but both work fine.

  concerning

• ADR 3.0.1 on Weblogic for APEX and base mod_plsql as feature

  (Hope someone can help me on this point, has spent a good part of the weekend trying to get this to work.)

  I installed and deployed ADR 3.0.1 using Sql Developer 4.1.1.  It works with my APEX 4.2.5.00.08 DB 12.1.02 deployed on Weblogic Server 12.1.3 (zip distro of otn) all running on my Windows 10 box.

  Now, I want to add the ability to run a simple mod_plsql procedure "hello world".  I simply cannot function.  Here is what I have done (the best I remember):

  create user identified by somepassword ken;

  grant create session, contact Ken;

  create or replace procedure

  is

  Start

  HTP.p ("Hello World");

  end;

  /

  I can run the procedure of the SQL Developer and achieve the expected results.

  SQL Dev ADR administration, I created a new parameter (apex) of the database is already there called ken:

  JDBC: default settings

  URL mapping: Rule_type: path to the routing rule: /ken, scheme of RESTful services: KEN

  ORDS_PUBLIC_USER: entered the password of this user

  PL/SQL gateway user: KEN

  APEX REST users: left two passwords Virgin, documentation ADR seems to indicate that they are not necessary for the use of the APEX non.

  Downloaded configuration.

  WebLogic command window provides the following error message:

  INFO: update configuration: default values

  Process of oracle.dbtools.url.mapping.file.FileURLMappings August 10, 2015 08:29:50

  WARNING: Could not find any target database corresponding to: ken, KEN

  < 10 August 2015 14:29:50 CEST > < WARNING > < default > < BEA-000000 > < did not find any target database corresponding to: ken, KEN >

  I'm thinking that something is wrong with the url - mapping.xml:

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < pool-config xmlns =" http://xmlns.Oracle.com/Apex/pool-config "> "

  < chicken base-path = "/ ken" name = "ken" space work-id = "KEN" / >

  < / pool-config >

  I tried configuring it with java command line syntax:

  SET JAVA_HOME = D:\Oracle\sqldeveloper\jdk\jre\bin

  d:\Oracle\sqldeveloper\ords > java-jar ords.war map-url - scheme KEN - ken /ken base of type path name

  < 10 August 2015 14:56:58 CEST > < error > < default > < BEA-000000 > < pool named: ken_pu is not properly configured, error: ORA-01017: name of user and password invalid. connection refused

  I tried the URL Path mapping http://alluvion4:7001/ADR/ken SQL Dev

  NotFoundException [statusCode = 404, reasons = [[]]

  at oracle.dbtools.url.mapping.URLMappingsProvider.map(URLMappingsProvider.java:79)

  to oracle.dbtools.url.mapping.filter.URLMappingFilter.doFilter(URLMappingFilter.java:55)...

  My solution so far is to copy the ords.war, rename it and redeploy using SQL Dev, set the user to the PL/SQL gateway for my ken of the schema target, ignore the configuration of APEX restful services and deploy on weblogic.  That works, but I would like that it works in a simple deployment and I would understand options matching the url (what is necessary and what is not for this configuration).

  Any help is greatly appreciated.

  -Ken

  Sorry it took so long to come back.  I saw that 3.0.2 is out so I thought I would try it with the latest and best.  I disassembled the process by not using DO NOT SQL Dev or Weblogic.  It was in the syntax of the url of the map.  For a simple, plain old, mod_plsql dad, DO NOT specify the schema name (or a space of work-id also).  It's against intuitive but the schema name is specified when you configure the PL/SQL gateway in step "Setup - database'.

  The card-url command is then simply: java-jar ords.war map-url - ken /ken type base path

  the file url - mapping.xml looks at this (no name schema, not the space of work-id):

  http://xmlns.Oracle.com/Apex/pool-config">

• Thunderbird 38.3.0: No writable calendars are configured for the invitations with the provider for Google Calendar 1.0.4

  Hello

  I searched many hours today in the internet and your forums, but it seems that this problem is not solved yet:

  No writable calendars are configured for the invitations with the provider for Google Calendar.

  My Thunderbird is 38.3.0 and the provider for Google Calendar 1.0.4.

  I put calendar.google.enableEmailInvitations; true but it did not help. I also tried [email protected]... @googlemail.com. Calendar works fine, it syncs, I see all the entries etc. But I can't accept invitations even IF she must have write access.

  What can I do? Is there a solution for this?

  Thank you!
  Daniel

  Use CalDAV here to access Google Calendar via lightning. I have no experience with the add-on of the provider.
  In any case, it is my understanding that you must assign an e-mail address to a calendar in order to be able to accept the invitations for this calendar. I see that in your screenshot.
  You can try to remove the Google calendar in lightning and re-create it. Given that all the data is on the server nothing will get lost.
  Or you may want to try CalDAV.
  https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

• Question of 2012 of R2 group key Distribution Server configuration.

  Hi all

  I searched online for more information on the problems of kdssvc. and addition of KDSRoot keys that have been problematic.

  In looking Site and Services snap-in and display of the Service node information I see the Server Configuration file, but no input config key Distribution of Service Group.

  I don't see anything online that would allow me to recreate the Configuration of the server. Is there a way to re - generate the Cryptography keys properly here and allow me to move forward with additions of Cle_principale. I have a 2003 with a r2 dc 2012 functional area in the field of parent and child.

  In the test of items off I see kds configs are always available and kdsrootkey can be created after the deletion of the entry of the Server Configuration. I'm looking for documents of deep dive on the subject.

  Any help is greatly appreciated.

  David.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home