Server R2 2012 on Hyper-V 2012 stuck at 6% update of your system
Hello
I have a server virtual age of 3 week that works very well, however last night it needed a reboot for some updates of Windows, after restarting the server returned to the top and reached 6% system update and has been in this State for 24 hours.
Unfortunately I don't have round to set up backups on this server and it doesn't seem to be a restore point that I can do.
The server is configured as GEN2, I disabled the Secure Boot and all other integration Services, I tried safe mode and can arrive at the command prompt, but something else he goes to updates and stops again at 6%.
There is no image that I can load to the DISM and there is no pending.xml file in the Winsxs folder.
I'm running out of ideas and research on Google to go beyond that, or at least get to a point where I can get access to the other server in a cmd prompt. WSUS has been able to provide a report indicating a restart pending updates, but there are 74 of them so very difficult to determine what is causing the problem.
Can anyone offer any help?
Thank you very much
Tags: Windows
Similar Questions
-
Server R2 2012 - stuck notification services Windows stops
Hi all
I have a VM of Windows Server R2 2012 on ESXi 5.5. When I add it to the field, and it asks for a restart, I click Restart and it sticks to the 'Notification services that closing of Windows'. I love Server 2012 vms on the field that work well.
I have with closing force, the event viewer after the event shows all the problems. Closing subsequent downs end in the same message. I even let him run over a weekend and he didn't move past this message.
Does anyone know any reasoning for it.
Concerning
David
Try asking in the Windows Server forum:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer -
Resolution of Windows Server R2 2012 stuck at 1024 x 768 generic Non - PnP
Hello
I want to have my own windows home server, so I installed WindowsServer 2012 R2 on a laptop Aspire 7740. But the laptop does not screen because I don't need, I want to order the server remotely via VNC. The problem I have with the server, it's that I can't increase the resolution, so if I use VNC only 1/4 of my remote screen is filled with the desktop of the server due to the fact that my remote screen resolution 1920 x 1080.
Is it possible to increase the resolution of a generic Non - PnP monitor? (I tried to install the drivers from w8.1 but it did not work)
Greetings
healing
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
TechNet forums:
https://social.technet.Microsoft.com/forums/en-us/home
MSDN forums:
https://social.msdn.Microsoft.com/forums/en-us/home
See you soon.
-
Surface Pro stuck on the update screen
Surface Pro is stuck on restart after clicking install updates. Scree shows Surface see points encircling me and message says update of your system. It seems to be fine until it reaches 14%, how she does not exceed 14%. I stopped and restarted several times and also tried power and volume button Reset and is always arrives at 14% and then does not go beyond.
Hello
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that your pro surface is glued on the update screen.
I suggest you to refer to the suggestions of Steven_B responded on February 13, 2014 and check if that helps.
You can also refer to the Microsoft Help article below and check if that helps.
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
Hyper-V backup fails VSS in Windows Server R2 2012
When I try to do a backup of a VM (just the virtual machine, nothing else selected) on my Windows Server R2 2012 machine, I get the following error:
I still have to find an answer to this question.
Log name: Application
Source: SPP
Event ID: 16387
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: BitVault
Description:
Microsoft Hyper-V VSS Writer writer experienced an error during the creation of the snapshot. More information:.
The event XML:
16387
2
0
0 x 80000000000000
2746
Application
Microsoft Hyper-V VSS Writer
Writer experienced a transient error. If the backup process is started, the error does not happen. (0x800423F3)
Unknown error (0x80004005)
It's about getting the VSS event log
A VSS writer has rejected an event with error 0x800423f3, the writer experienced a transient error. If the backup process is restarted,
the error does not recur.
. The changes that the writer made to the writer components while managing the event is not available to the applicant. Check the event log for events from the application hosting the VSS.Operation:
PrepareForSnapshot eventContext:
Execution context: writer
Writer class ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
Writer name: Microsoft Hyper-V VSS Writer
Writer Instance ID: {4736e32f-5954-4b83-9ca5-37c560f308d5}
Command line: C:\Windows\system32\vmms.exe
Process ID: 3556PS C:\Users\Administrator > vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) copyright 2001-2013 Microsoft Corp.Author name: 'Task Scheduler Writer'
The writer ID: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
Status: Stable [1]
Last error: no errorWriter name: 'recorder VSS metadata store.
The writer ID: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
Status: Stable [1]
Last error: no errorWriter name: 'Performance Counters writer. "
The writer ID: {0bada1de-01a9-4625-8278-69e735f39dd2}
Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
Status: Stable [1]
Last error: no errorThe writer's name: "System Writer".
The writer ID: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {2ff32bb9-b4dd-4959-bfa9-7ea79b4567ba}
Status: Stable [1]
Last error: no errorAuthor name: 'ASR Writer.
The writer ID: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {4b7e63c6-ecb1-47f2-b317-e665b5de8c8c}
Status: Stable [1]
Last error: no errorAuthor name: 'Microsoft Hyper-V VSS Writer.
The writer ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
Writer Instance Id: {4736e32f-5954-4b83-9ca5-37c560f308d5}
State: [8] failed
Last error: error renewableAuthor name: 'Dedup Writer'
The writer ID: {41db4dbf-6046-470e-8ad5-d5081dfb1b70}
Writer Instance Id: {5ac93c0a-dc01-4564-bac9-23051e2783a7}
Status: Stable [1]
Last error: no errorAuthor name: 'Shadow Copy optimization Writer. "
The writer ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {a24b7ea7-e48b-44eb-9521-585648b7951b}
Status: Stable [1]
Last error: no errorName of the author: "COM + REGDB Writer".
The writer ID: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {b9b0674c-119c-4345-870d-fadc0e7beda4}
Status: Stable [1]
Last error: no errorAuthor name: 'Registry Writer'
The writer ID: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {30a6302b-d5c8-4b9a-a0b7-61049e1c4767}
Status: Stable [1]
Last error: no errorAuthor name: 'WMI Writer'
The writer ID: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {74ee0321-a546-4f94-a624-c715f2290db4}
Status: Stable [1]
Last error: no errorPS C:\Users\Administrator > Get-VMIntegrationService - VMName
VMName name active PrimaryStatusDescription SecondaryStatusDescription
------ ---- ------- ------------------------ --------------------------
Home time true synchronization OK
House real Heartbeat OK OK
Pair key / value of home Exchange real OK
House real stop OK
House VSS True contactless
House Guest Service Interface fake OKHello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
TechNet Hyper-V Forum.
https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverhyperv
See you soon.
-
MS win Server R2 2012 and Hyper-V issue licenses
My company has 60 employees (and 60 desktops / laptops) and currently have an old principle that server solution of Microsoft Basic with element a cloud as Office 365 for email only. We seek to reduce the estate of server to Server (2 CPU - Dell PowerEdge T610), it currently runs on two old but not sterilized systems running Windows Server 2003 R2 (Dell PowerEdge 2900) and Windows Server 2008 R2 (Dell PowerEdge T610).
In the short term, we want to create a brand new installation of MS Windows Server R2 Standard edition 2012 who will manage our advertising (and DC) and support businesses main accounting IRIS software that requires a MS SQL DB. This cloud all must be configured to allow integration with MS Azure Site recovery to allow us to turn up in the azure of the VM disaster. In my view, this means that the configuration of the OS as a Hyper-V virtual machine instance.
The new server Win 2012 R2 has not really be a VM as its only one instance that I need, but from what I can make out, I need to make a virtual of Hyper-V machine to join the recovery Site of France. I can't determine exactly what license I need to achieve however. Any help would be appreciated.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
Help stuck in Windows Server R2 2012 kernel mode
I have recently installed windows server 2012 r2, which turns out to be the right product, I was after and now can't get out of kernel mode and get stuck looking at the command line. I tried "Install WindowsFeatures Server-Gui-Mgmt-back running, but this only loads to 68% then fails because it cannot download the source files.
I want to delete r2 Windows Server 2012 and return to the old windows 7 I had installed. Are there documents, or methods of removal of windows server r2 2012 or restore my old windows, I would like to know please.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers) -
Nested error Server R2 2012 - "hypervisor does not work.
Good afternoon
I'm having some trouble from a virtual computer inside my 2012 R2 VM server. I search around the internet for a while find several articles and forums on how to configure nested visualization including the official document on these forums but I still have a problem.
My configuration:
Physical server running - ESXI 5.5 1623387
Physical machine - dell R720 (2 x e5-2690 - supports the VT - X and the EPT and it is enabled in the BIOS, esxcfg confirms with '3')
New VM - Server R2 2012, VM version 9 installation (created by the web console vmx-09)
I added / tried every configuration option I found:
-J' created the virtual machine console web and checked "expose hardware virtualization assisted for the guest OS.
-I made that vhv.enable = "TRUE" in the vmx configuration
-J' tried to add hypervisor.cpuid.v0 = 'FALSE' to the vmx configuration
-J' tried to add vhv.allow and more vhv.enable in the/etc/vmware/config, but neither makes a difference (discovered he was not necessary later thanks to a post on this forum)
-J' tried to set the name of guestOS to "winhyperv" in the .vmx file
-J' tried the type parameter of "ESXi 5.x" guestOS in the thick client
-J' set the cpu/mmu virtualiztion tick at the last
-J' tried to set the registry values level 1 as seen here ecx
-J' have ensured that monitor.virtual_exec = "hardware".
-J' uninstalled the hyper-v role and reinstalled after you make these changes without result
-J' tried an another 5.5 ESXi 1331820 host with these settings and it does not work (VT - X confirmed as well)
-J' tried 2016 instead of 2012 R2 server and it does not work
I think it's all the things I tried. I'm sure I've probably missed something very obvious, but any help would be appreciated.
This specific virtual machine has not generated a vmware.log file but still one of my virtual machines to test (with the same exact questions on the second physical host) has generated a couple and I enclose you one of them, and more can be provided if necessary.
Thank you!
Post edited by: Ian details price changes
It seems that the latest Hyper-V does not like hardware virtual version 10. However, it seems not be satisfied with version 11 of virtual equipment.
-
Server R2 2012 on ESXi 5.1
I'm building a test lab and I managed to install Server R2 2012 but I'm unable to activate. During the activation process, you receive an error from slmgr '0xc004fd01' and when you google you get nothing. Then I ran the command 'slui 0x2a 0xc004fd01' and received the details of «Windows is not running on a Microsoft Hyper-V virtualization platform» supported I've never seen a Windows OS essentially prevent it be enabled on VMware. Someone at - there a work around for what I would try Server R2 2012 in order to test out new features and think it's weird that I could use it only on Hyper-V.
Hi Chdecarl01,
Thank you for reporting this issue. What is the nature of the product key you use to activate the comments? The activation keys for automatic Virtual Machine (AVMA) article on automatic Virtual Machine to activate TechNet should raise an error like that, unless the client is running in Hyper-V.
See you soon,.
--
Darius
-
Problem installing VMWare Workstation on a Server Windows 2012
Hello
I have problems when trying to install VMWare Workstation on a Server Windows 2012. Windows Server is Amazon EC2 environment and a generic image extended release.
The problem is that the installtion process fails because of "Hyper-V" during installation, but after investigating the option "Remove roles and features" I can see that it is not installed.
Is there any fixes for this issue?
I enclose three screenshots for you pleasure.
Regards, Ray...
Hello Ray,
Welcome to the VMware community forums.
You run an EC2 instance that has just 615 MB memory installed?
It's kind of a weird for a host, much too low for Amazon memory configuration, even be profitable.
I think that your server is running UNDER Hyper-V, for example. It is probably a Virtual Machine.
You can easily check that yourself by running the script from this site:
How Hyper-V to: detect if you are inside a virtual machine
If it's a Hyper-V virtual computer then I don't think you can install VMware Workstation on the virtual machine and run the nested clients.
You could do the opposite (invited running hyper-V in a workstation virtualized on vSphere) but is not very fast.
As you have no control over which platform virtualization Amazon use for their windows servers, I'm afraid you will have to go for a dedicated server instead of a virtual machine.
Hope this helps,
--
Wil
-
Serial on a Server R2 2012 RD650
Hello
I'm trying to set up serial on a RD650 running Server 2012 R2 Standard and receive this error during data collection:
The API could not be invoked in the node. (IP address = 10.0.0.247, cause love ERROR = select * from Msvm_ComputerSystem:HRESULT = 0 x 80041010)
I found some indications that EasyManage maybe not yet compatible with Server R2 2012 but am not sure. Is it an official solution for this?
Thank you.
Hello
Unfortunately, the serial application does not support our * 50 product lines. There is a solution under development and will be available in the future.
-
Server certificate 2012 R2 autoupdate not working
In Windows Server R2 2012, certificates are not automatically being updated therefore with question as 'unknown Publisher '. I tried to install the same application in other machines with 10 Windows and Windows 7 and I can see Publisher name correctly.
I tried to install the certificate manually in server R2 2012 but certificate still shows the old information (validity). Please guide me what the rule of firewall and service causing this error and how can I update manually or by windows update.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Hello
I have a little problem and I don't know how to fix it, please help me.
I want to set up a file/print. I installed Windows Server 2012 Standard on a HP micro server, and this is my problem. I can't see the server on the network. The rest of the clients (computers laptops and desktops with windows 7/10) can meet, can their auto ping, can access, only the servers that are not accessible. Also, from the server, I don't see the rest of the customer. The network on the server works, I can do browsing the internet of him, I can't access the client. Also I can ping the server from the router and the router to the server.
Thank you
Best regards
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Hello
I was wondering if you could help me.
I'm trying to find out how to export a .sql file, I created from Oracle Application Express of SQL Server Management 2012? I'm not very technical, but it seems that the Oracle code does not work with SQL Management Studio when I drag the file inside.
I need the database Oracle express and its data to enter in SQL Management Studio, so any help would be much appreciated!
Thank you.
Hello
Your question is beyond the scope of this community.
Please repost your question in the SQL Server TechNet Forums.
https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer
See you soon.
-
Support for WMI 1.5 tools on Server 2008 R2 and Server R2 2012
We currently plan to migrate tools WMI 1.50.1131.0001 on Server 2008 R2 and Server R2 2012. The application is compatible on the aforementioned platforms?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
Maybe you are looking for
-
How to install linux on Qosmio G20-120
Hi all.I tried to install some linux distro in a new qosmio g20. Only knoppix 3.8 and 4.0 CentOS have some chance to install, the other distributions can´t recognize the hd or dvd (on Ubuntu), but the distributions that have installed the Hd become u
-
Catalyst to travel constantly crashes, does not recognize the files
I have a PXW - X 70 and shot several hours to XAVC Long GOP. I tried to transcode lots in catalyst access the ProRes format and go constantly crashes. I have restart browse, search and see what files were not yet converted and repeat ad nauseum to ge
-
Satellite L355-S7817 - cannot control the default voice of Narrator
I don't seem to be able to control the default voice on my L355-S7817 with Vista home OS.I changed Mrs Anna parameters but Toshiba male voice starts each time I use a program that uses the voice of the Narrator. I even uninstalled the engine from Tos
-
Windows games have been deleted, how to bring them back?
I need my deleted games! I want just the games back, they have accidentally been deleted from the system somehow! I don't think I would have to pay $49 for paper copies! They must be included when you purchase your system! Any suggestions out there?
-
Original title: what is xrxfptlt? I updated to XP from SP1 to SP2 and rec'd an investigation re firewall to block xrxfptlt. I can't locate any file containing this sequence, including any system or hidden files. A search in the registry also has give