Server SSL Cert HQ 4

Similar Questions

• Security Server SSL Cert question...

  I saw installed locally in our local network, I am now trying to install it in order to outsiders can get their desktop computers. I'm reading the documentation on the SSL certificates on the Security Server, but I can't find anything specific to this instance. Can I just use the same procedure as the login server (get the cert from our local CA - which is one of our domain controllers) or do I have to get a public place like Entrust Certificate?

  Thank you.

  You should be able to do without IIS.  Check out this KB http://kb.vmware.com/kb/2032400

• SE sec_error_inadequate_cert_type with private SSL Cert

  Howdy,

  I run a certification authority private for personal use and only to learn more about SSL Certs. However, with the current version of FireFox I'm on (31) I can no longer visit the sites that I secured with SSL Certs that are signed by this CA, although these SSL certificates work perfectly fine in Chrome and Internet Explorer. I get an error "sec_error_inadequate_cert_type." I can't assume that the certs that I delivered are bad in some way, but the error is imprecise and the error page does not specify more.

  Only, I discovered this when I realized some of my SSL certificates had expired, and I went to their reissue.

  From the certificates that has not yet expired, but problems can be found here:

  • https://forums.silicateillusion.org

  One of the Certs I tried reissue, assorted fields included as closely as possible to a Google SSL cert I looked up is here:

  • https://phpMyAdmin.endofevolution.com

  These certificates have been generated using the application called SimpleAuthority, found here: http://simpleauthority.com/

  A Site like Networking4All.com seems to believe that certificates are valid, with the exception of the certification authority which is Self signed: http://www.networking4all.com/en/support/tools/site+check/report/?fqdn=phpmyadmin.endofevolution.com & = https protocol

  Curiously, using another site like SSLShopper me an error similar to FF31: http://www.sslshopper.com/ssl-checker.html#hostname=https://phpmyadmin.endofevolution.com

  Certificates are currently running on an Apache Web server: Apache/2.2.21 (Win32) mod_ssl/2.2.21 OpenSSL/1.0.0e PHP/5.3.10

  The CA Cert is in store for FireFox as being approved.

  If needed, I can provide certs.

  I discovered the problem: the CA certificate that I was using had extended consumption.

  See Bug: 1049176

  I confirmed this by generating a new CA test with the excluded the use extended field, then generate a new certificate of SSL certificate checks correctly now.

  While I'm relieved, I realized what the problem is, being so vague with the error message that makes me lean towards another browser for primary use. The fact it took me 4 days and a very large amount of work to understand why this was happening is unacceptable, because the error description was generic and included no sets out the steps so never.

• vRops SSL Certs

  Hello

  So, Ive recently rolled out an 8 node vRops enviromnemt and finally had the time to ask the authority of internal certification signed SSL Certs, I created them, convert their PEM format, downloaded 1 cert, had look ok, then did the 2nd node, verified and it looked ok, I then checked the node 1, who pointed out a mistake and said there the same SSL certificate as the crux of the 2nd.

  Now I need to check that documentation does not seem to say that and not see anything on the web it is clear either.

  VROps is the SSL certificate of the same SSL certifiate for each node for an enviromnemt?

  If so what I need to create a single SSL certificate and a subjectAltName for each node intot he asks cert.

  which means that I have put an article like this in my openssl.cnf

  [v3_req]

  subjectAltName = @alt_names

  [alt_names]

  DNS.1 = vropsnode1.internal.domain

  DNS.2 = vropsnode2.internal.domain

  DNS.3 = vropsnode3.internal.domain

  DNS.4 = vropsnode4.internal.domain

  DNS.5 = vropsnode5.internal.domain

  DNS.6 = vropsnode6.internal.domain

  DNS.7 = vropsnode7.internal.domain

  DNS.8 = vropsnode8.internal.domain

  IP.1 = 192.168.1.1

  IP.2 = 192.168.1.2

  IP.3 = 192.168.1.3

  IP.4 = 192.168.1.4

  IP.5 = 192.168.1.5

  IP.6 = 192.168.1.6

  IP.7 = 192.168.1.7

  IP.8 = 192.168.1.8

  see you soon

  John

  The documentation is really poor in this area. but I got this VMware"one certificate will be used by the web server on all nodes, so to do the certificate must be valid for all nodes.  One way to get there is with multiple subject Alternative Name (SAN) entries".  So looks like im on the right track.

  Which is kind of weird, but works as that said, when you look at the certs ssl free signed that they have different names vc-ops-slice-1, vc-ops-slice-2 etc. but then you download an SSL certificate cert of the same is on all nodes.

  Update: Ive had an SSL certificate generated with the subjectAltName as in the example above with the full domain name and IPs for each node in the cluster and created the imported and appropriate to this PEM file, it works and the certificate is valid on all the nodes, this is the solution.

  Also of the impact, that is the question that vRops Government itself to vCenter with the IP address and not FQDN, the SSL certificate needs the IP address, but in my case it causes also connectivity issues in browsers because of our proxy settings, so it must be considered if his need...

  • vRealize extension of Operations Manager is saved using the IP address instead of the DNS name
    By default, vRealize Operations Manager saves its extension with vCenter using the IP address of Operations Manager and not the DNS name vRealize. Users who click on open vRealize Operations Manager tab monitor vCenter open a URL based on the Operations Manager IP address vRealize and not the DNS name.
    Workaround: To allow the registration of the name vRealize Operations Manager with the DNS name extension, follow these steps:
    1. On each node of the cluster of Operations Manager vRealize, follow these steps:
       1. Starting the console, open the following file in a text editor.
          $ALIVE_BASE/user/conf/configuration.properties
       2. Add the following line to the properties.
          extensionUseDNS = true
          Note: You can go back to using the IP address by changing the property to false.
       3. Save and close configuration.properties.
    2. Connect to the Operations Manager vRealize management interface and restart the cluster.

  John

• CSR SSL Cert for remote Web Workplace

  Customer shall execute a certificate SSL for Remote Web Workplace and asked me for the Certificate Signing Request (CSR) information for the domain. I searched help and knowledge that they can't run their own SSL and now you're wondering how to move forward?

  T Hey I need to use Remote Web Workplace, which runs on a sub domain

  Looking for an answer on how my client can use their position of remote Web Workplace and have their site hosted on BC?

  Remote Web Workplace is a feature of Microsoft Windows Small Business Server and Windows Home Server 2011 medium-sized product company, Windows Essential Business Server, that allows existing users to log into a network front face of the small Server Edition-Professional family interface-based.
  
  After logging in to Remote Web Workplace (using their Windows domain user name and password used), a user can access enabled features of the Small Business Server or Essential Business Server, such as Outlook Web App, the viewing of SharePoint pages and (if a machine is running and allows him to) full remote control of client computers connected to the network to the server.

  Off-site access
  Remote Web Workplace is a feature of Windows Small Business Server, Windows Home Server 2011 and Windows Essential Business Server that allows access to users to facilities when they are offsite such as email, reading/modifying shared calendars and remote controlling a machine as if they are sitting in front of IT.
  
  Connection options
  When you connect to Remote Web Workplace, users can choose their connection speed which then optimizes the characteristics of the connection. The options are: Small Business Network (Intranet), broadband, modem of 56 Kbps and 28 Kbps Modem.
  
  Means of access
  The Remote Web Workplace is a Web application and is accessed through a web browser. To control remote computers, a user is required to install a "ActiveX desktop remote control" in its web browser once and only Internet Explorer is supported.

  
  

  Please and thank you!

  Short answer (to date) you can not SSL certs on BC... so you can't generate CSR

• Help with weird Vcenter SSL cert issues?

  Hi all

  We set up just a new Vcenter server with 2 ESX4 host.  Everything works fine, but when we loging to the DNS name of the server (virtual server) it invites for the SSL cert twice.  Once for the DNS name of the virtual server and a time for the IP address.  If we connect via the IP instead of the DNS name it only inspires us once.  We do not use currently an SSL certificate then just click on ignore twice, but it's a strange slow that I have not seen before and that he could use some direction?

  What is a DNS problem? or a problem / setting in vCenter.  Any help would be greatly appricated.

  Thanks again,

  Double guest is normal when VUM is enabled.

  In our environment, we installed the SSL certificates for main vCenter (without prompts for main VC) and then just installed/ignored these messages for VUM plugin.  The reasoning is that only a few admins will activate the Crossover plugin.  Most users have no need for this.

  If you do not enable SSL at all you can try this to switch them off at the vSphere client.

  You can right-click on your viclient--> properties--> find the target: on my system is "C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\Launcher\VpxClient.exe.

  Adding a switch '-j' heard ' in the end do like:

  'C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\Launcher\VpxClient.exe'-i Yes

  I understand there is no way to disable the vCenter level alerts.  This must be done at the level of the vSphere client or SSL certificates must be configured.  It is of course your call concerning the safety of your CA.

• Between R2 2012 Windows and IBM Http Server SSL connection failed periodically.

  Hi, I have a problem recently. I found that my windows server 2012 R2 has sometimes failed to connect with IBM Http Server ssl. Here it is the information of the two servers:

  1 windows 2012 R2

  -Already activate TLS 1.2 and TLS 1.0

  -Already the latest version of windows update and restart

  IIS - 8.5

  2 IBM Http Server

  -Apache 2.2.31

  -using OpenSSL 1.0.2f

  -Allow TLS1.2 and TLS 1.0

  I also captured network traffic when the two server. If the ssl connection has managed to create. Traffic will be like the following screen:

  

  If the ssl connection was impossible to create, network traffic was like the below:

  

  You will see that the ssl connection failed when the version of the TLS protocol was passed to TLSv1. And returned access denied.  The details of the access denied was like the below:

  

  As the captured screen reproduced above, you will see that the SSL for Client Hello was TLSv1.2 but running on the recording layer TLSv1. this Hello customer was sent by the server r2 windows 2012. I don't know why the ssl connection has been passed to TLSv1 suddenly.

  I found that Microsoft has released an update on January 12, 2016. This fix is the resumption of SSL. Update ID was 3109853 , but I have already applied this update on my server. I tried to do the with the other type of server ssl connection, the ssl connection is possible in a stable condition and has happened the problem I mentioned. Is there someone met this case and resolve it finally?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• ASA5505 inscription on SSL cert error when applied to the interface?

  Created a CSR, gets the certificate files, the downloaded ASA505.   Three certificates in the CA certificates; the one in the certificate of identification.  Everything seems all just wonderful.  "Now use the SSL certs: in trying to associate the certificate with the Interface in the SSL settings section, we get an error"

  [OK] ssl encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
  [ERROR] ssl trust-point ASDM_TrustPoint5 outside
  Trustpoint are not registered.  If please register trustpoint and try again.

  The cert will appear in the drop-down selection, why the error?  How do I delete it?

  Hi Stewart Buswell,

  I have seen this problem when starting the CSR request through the CLI by using the configuration of the terminal of registration and then going to the ASDM and adding the identity certificate without using the command crypto ca enroll through the CLI.

  In this case, if you use the CLI/ASDM you can follow this guide:

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  And the way to solve this problem will be generation a new CSR on the ASDM using the same key pair and install the certificate on this trustpoint. After you apply the cert to the ssl, you can remove the old one which was not.

  Hope this info helps!

  Note If you help!

  -JP-

• SSL Cert automation tool

  Hello

  I wanted to vSphere update 5.1 to 5.5 and had problems with the standard certificates. So I decided to stop and first to replace now. We will generate certificates by our internal CA and spread with the SSL Cert automation tool.

  Read a few KBs I have two questions before you start.

  1. may I do the modification of certificates in production period or do I have to put something in maintenance mode and so I have to do this weekend?

  2. While the tool is running, I'm able to choose what services I want to update. When I choose "8" all services are selected. It doesn't matter if do not have all of them running. For example, we do not have the Orchestrator, but I don't know if we Log Browser.

  Thanks in advance

  Wolfgang

  Hi Wolfgang,.

  (1) you will need downtime that services are restarted a couple of times, also don't forget to close all dependent solutions (VMs should not affect but that managing the components are affected).

  (2) log browser is embedded in the Web Client, so if you have that installed you also Log browser

• Cannot enable the Web Server (SSL) site on El Cap Server

  ' tLooking for help here, trying to put in place in El Cap 10.11.3/Server 5.0.15 Web services and the no - SSL server comes just in green in the admn, but the SSL server will not activate. I have an a record for the server to an external DNS server mdm.mycompany.com, and which is mapped to the external IP address of my network. I also have the port forwarding enabled on the router to 80 and 443. Customers outside the network can reach the site at http://mdm.mycompany.com on port 80, but not on 443 as told them the server does not accept unsecured connections. This isn't the same problem when the customer has to trust the certificate; The secure connection is totally denied. My intention here is to activate the Profile Manager, so that I really don't like whether or not the sites work, but the Profile Manager requires a secure connection. I use a cert Self singed at least for testing purposes, but I can't. Imagine that which prevents the site SSL itself allowing all the... Orientation/information appreciated, thank you!

  

  Most of the browsers (and probably accessibility service Apple, aka the green dot) reject/warn self-signed certificates. I would go ahead and obtain a trusted certificate. StartSSL.com offers free class 1 certificates and they work fine.

• Configuration of server SSL Mirage?

  Hi community

  I have problems to install the Mirage server, installation failed when you set up the server with SSL. I have create a signed self web server certs internal for our internal CA according to the video

  Mirage of VMware: Preparation of internal CA signed certificate SSL - YouTube

  I import the cert under Local computer and also the title of trusted root certificates, but always with no luck... error is still the same I checked also the permission (I m Domain Admin) and there is no error in the subject or...

  

  Any ideas how to solve this problem?

  Best regards

  Fixed it with disable UAC in the register only with msconfig is not enough ;-)

• View, Split DNS and SSL Certs HELP

  We have:

  1. Internal security server - not on the domain, IP address of the 10.121.125.110 and the external address of 209.68.96.26
     1. Installed SSL certificate for view.victorschools.org
        
     2. View.victorschools.org DNS entry to 209.68.96.26
        
  2. Broker server - the field, has internal IP address of the 10.121.127.107
     1. Installed SSL certificate for broker.vcs.local
        
     2. Broker.vcs.local DNS entry to 10.121.125.107
        
     3. View.victorschools.org DNS entry to 10.121.125.107
        

  The problem arises on two fronts:

  1. Portable professor who has installed the view client pointing at view.victorschools.org. Internally, that the DNS entry pointing to the broker server that has the broker.vcs.local cert. Unless the client is configured to check no certs, the connection will not work. When we try us immediately returns with a cert mismatch error.
     
  2. Personal devices - student charge the Customer View on a laptop or iPad and it points to view.victorschools.org. It works fine at home, but even once will not work on campus because there is an incompatibility of cert
     

  Can I solve this problem by changing a DNS entry and have view.victorschools.org point to 10.121.125.110 which is the internal IP address of the Security Server? Of course, this will make any student with a personal device point to our security at home or school server. I know we want internal devices to point to the broker and external clients to point to the Security server. Here is a discussion of the same thing, I feel less the number of SSL certificate.

  http://communities.VMware.com/thread/431399

  I know that a windows CA to generate certificates with Subject Alternative names (SAN). Can we generate a cert from our CA window for broker.vcs.local and view.victorschools.org and install it on the server broker to solve this problem?

  Replace the SSL on broker a SAN certificate.

  If you route everything through the Security Server, you create a single point of failure, not to mention a bottleneck in the network.

• View issue 5 Client SSL cert.

  So, now with 5 Client view, it's tighter security with default certificates.  I see that there is a way around this, but I'd rather the default setting.  Here's my situation:

  I have my 2 servers load balanced with one DNS name connection and the SSL certificate is reflecting this name.  However, I have some remote VPN users who do not have access to our DNS and they use the IP directly to connect.  In addition, in certain circumstances, we can have a user connect with one of the server names or direct IP address.  So, we have a potential of 6 different ways to connect.  The only way it seems to work with the customer if they do not use the name of DNS load balancing is if put us it to "unsecured".  It's not ideal because should ask each user to change this setting.

  Yes, is there a way to have multiple SSL certificates for each connection method and how do you do that?  If not, is it possible to change the customer to install with "Not safe" by default instead of warn?

  Thank you very much!

  Scott.

  Yes, certificates are difficult to get your head! I must return to my whenever detailed notes, I revisit the. So maybe it's too much detail from the beginning, but if all goes well, it gets out you a bind.

  1. create the keystore of the display server certificate

  -Add C:\Program View\Server\jre\bin VMware to the PATH

  -To the cmd prompt run "c:\program VMware view\server\sslgateway\conf" cd

  - keytool - genkey - keyalg "RSA" - keystore keystorefilename.p12 - stores pkcs12-validity days

  -Provide and confirm a password for the key file when prompted (this will settle in clear text later by the way)

  -You get will then invite your first name and last name. Use the servername.domainname. Answering other questions if you wish.

  - Type Yes to confirm

  2. create the CSR request

  - keytool - certreq - keyalg 'RSA' - csrfilename.csr - pkcs12 keystore - keystorefilename.p12 of the file stores

  -Use the password of the keystore creation

  3 apply for the CSR to the CA Windows

  -Open IE and go to the page of application for certificate cases

  -Advanced certificate request

  -Apply for a certificate

  -Copy and paste the contents of the csrfilename.csr file

  -Model cert: Web

  D ' other attributes san: dns =bla& dns =blah.domainname& dns =ip (must have already editflag command run on CA server for it to wor in accordance with my last post)

  -Save the file c:\program view\server\sslgateway\conf VMware Base64chain p7b

  4 chain of certificates of import in keystore

  - keytool-import - keystore keystorefilename.p12 - stores pkcs12 - keyalg 'RSA' - trustcacerts- base64chain.p7b of files

  - At the command prompt, type Yes

  You must then change/create the text file 'locked.properties' in c:\program view\server\sslgateway\conf from VMware that contains 2 lines:

  keyfile =keystorefilename.p12

  KeyPass =keystorepass

  5 reset (VM says that restart web services view VM should do, but I didn't this work but it might for you)

• Flex + self signed SSL Cert

  We have an SSL certificate that is self-signed on our application server. When we run the application flex from outside of our network and try to access the web service, flex throws the following error:

  Failed to load the WSDL. If there are currently online, please verify the format of the WSDL and URI file

  We did install the certificate on client computers for IE and Firefox, but nothing seems to fix it, as we have tested the service via http and it works fine, but when you switch to https is when it breaks. To test further we loaded the wsdl for the service from outside of our network and were able to see with the crossdomain.xml file that resides on the server. At this point, we are at a loss of what could be the problem.

  Does anyone have any suggestions?

  Thanks in advance. If you need information additional just ask.

  Pony up the $15 for a cert play. You've already spent more in a way that tries to "solve" this problem.

• Wildcard SSL cert on ASA

  Is it possible to use a wildcard on a SAA SSL certificate? In other words, instead of getting a specific cert with the FQDN of the ASA, we would use the emitted wildcard cert?

  Absolutely, it is particularly necessary in environments of ASA vpn load balancing. When you connect to a FULL domain name which translates an IP load balancing, one of the ASAs will make a http redirect to its individual host name, your browser (or AnyConnect) will attempt this connection and ASA must have a certificate for this specific host name. Have a certificate wildcard on all the ASAs solves this. I've got this running on several clients.

  If you need help with setting up, let me know.

  You can generate keys private on the SAA (and later export it to another ASA or other devices other than cisco), or you can import a certificate with existing wildcard characters with the private keys (to the PKCS12-BASE64 format)

  Kind regards

  Roman