Server VM builds the config recommendations

Similar Questions

• Version of the content server and build the relationship?

  When you look at the version on a content server you see for example build v5.3 3529.

  But the software versions are marked: v5.3.0, v5.3.1, v5.3.2.

  What version of these 3 versions? I can't find it in the available doc.

  Rgds, Geert.

  I don't know why they changed the version posted on the content server to use the main exit S5.3 and then the build number, but still the free software download you is different.  I can say that S5.3 build 3529 is F5.3.2, do not know what other build numbers are however for S5.3 and S5.3.1.

• Recommended for users of a Web site hosted in Windows server 2008 r2, the versions of Adobe Reader

  We have a web application that is hosted on a server in Windows 2008 R2 where users download PDF documents. What versions of Adobe readers should be informed as the minimum configuration.

  Hey user11203456,

  The version that I mentioned is specific to Windows 2008 R2 server. In the link provided when you select the version of the platform & the language, it will offer you the suitable Adobe Reader version.

  Kind regards

  Nicos

• vCenter Server - rename the config files and moving datastore

  Our vCenter VMware Server (4.1.0) is a virtual machine. The vCenter Server database is stored on a SQL Server that is also a virtual machine. The configuration files for the server vCenter and file a vmdk are located on a data store and the other vmdk file is located on another data store. This isn't a problem, but the parent folders that store these files have different names and do not reflect the name of the vCenter Server VM. Also the names of configuration files are different for the vmdk file names. I would like to move and rename files vmdk my vCenter Server to another data store and all the configuration files so that the parent folder that stores all the files has the same name as my vCenter Server VM and all of the files in the folder are on behalf of my vCenter Server VM.

  What would be the best way to do this? Can I install the stand-alone converter on the vcenter Server and migrate the server? I have a vCenter Server Standard license. Thank you.

  as above, use storage vmotion if possible else, you can use vmware converter...

• No aaa new-model in the config

  Hi all.

  First Cisco router and first post so please be gentle.

  I did a search on it and I get the same as in the post that see the deliverance

  Router (config) aaa new-model #no

  IOS 12.4 (24)

  I erased the router and when I got it.

  I had configuration, a little as I wanted as a reference point.

  I saved.

  I then started to work on the wireless part of the walk through is because:

  Router (config) #aaa new-model

  Router (config) #.

  So, I went back and tried to erase this line in the config file.

  Yes, I did:

  Router (config) aaa new-model #no

  Router (config) #exit

  router #wr

  See the router # running

  I continue to see the no aaa new-model line in the config.

  So I erased the whole thing to help:

  router #write clear

  and

  router #reload

  said no to save and then default to the last question.

  All recharged and it seemed to be back as before, but then exits show run this OK not how long I erase and reload:

  Router > en
  Router #show run
  Building configuration...

  Current configuration: 1331 bytes
  !
  version 12.4
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  boot-start-marker
  boot-end-marker
  !
  forest-meter operation of syslog messages
  !
  No aaa new-model
  !
  !
  dot11 syslog
  IP source-route
  !
  !
  !
  !
  IP cef
  No ipv6 cef
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  !
  !
  Archives
  The config log
  hidekeys
  !
  !
  !
  !
  !
  interface Dot11Radio0
  no ip address
  Shutdown
  base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
  root of station-role
  !
  interface Dot11Radio1
  no ip address
  Shutdown
  Speed - Basic6.0 9.0 basic - 12.0 18.0 basic-24, 0-36.0 48.0 54.0
  -More-
  * 23:40:09.207 Jan 16: % LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, modified root of station-s role
  !
  interface FastEthernet0
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface FastEthernet1
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  interface FastEthernet4
  !
  interface FastEthernet5
  !
  FastEthernet6 interface
  !
  interface FastEthernet7
  !
  interface FastEthernet8
  !
  interface FastEthernet9
  !
  interface Vlan1
  no ip address
  !
  interface Async1
  no ip address
  encapsulation sheet
  !
  IP forward-Protocol ND
  no ip address of the http server
  no ip http secure server
  !
  !
  !
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  Line con 0
  line 1
  Modem InOut
  StopBits 1
  Speed 115200
  FlowControl hardware
  line to 0
  line vty 0 4
  opening of session
  !
  end

  Is there a way to remove that line from the config, or it is stuck and if stuck is there any effect of him?

  Thank you very much

  Maurice

  Hello Maurice.

  Just to confirm: you want the 'no aaa new-model' command to be removed from your config? If so, this is the default when AAA is disabled on the device. If you want to enable AAA, then just run the same command without the 'no '.

   aaa new-model

  Then save your config:

   write mem

  For more information about this and other controls, you can reference 'Command search tool' Cisco

  https://Tools.Cisco.com/support/CLILookup/cltSearchAction.do

  I hope this helps!

  Thank you for evaluating useful messages!

• Expand D: drive of the virtual server while keeping the data?

  Hello

  We are running VMWare ESX 3.5. We invited Windows 2003 SP2 Enterprise Server located on the server. Each guest has a 20 GB C: standard and we also build with a 20 GB D: both hard drives are separate VMDK files

  I have a server where we need the extended to 30 GB drive D:. Unfortunately, there are already data on the D: drive.

  Anyone know how I can extend the D: existing 20 GB to 30 GB without losing any data? Wouldn't be a case to go to the properties of the Machine virtual > 2 hard disk > disk Provisioning and then change the size put into service 20 to 30? Then we can use Diskpart to extend the volume?

  This will keep data intact even if? Or are there other recommended methods?

  I don't remember for sure if on 3.5, you can expand on change them the settings, but you can certainly make using these instructions: http://kb.vmware.com/kb/1007266

  I hope this helps.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• "Value is invalid or out of range" when you build the project in CVI 2009

  I converted a project to the wire of the CVI 9.0.1 to CVI 2009, and whenever I try to compile the distribution I get immediately the error message "Value is invalid or out of range" and stop the construction.  This error message is not too terribly useful to determine what the problem is, and I don't see anything obviously wrong with the signs of 'change the Installer '.  Any idea what's going on?  Thank you.

  Well, I'm a little confused by what I see. The newspaper confirms my suspicions earlier that one of the values of timer progress cached version is cause of an error. However, the values in the file "TriboScan OFFLINE.cds" you posted appear very well and do not cause an error when I copy in .cds another simple distribution (since I do not have the files to test your actual building distribution). Are you sure that you build the 'TriboScan OFFLINE.cds' distribution? In any case, I recommend a little offending the .cds hand editing. Save first (just in case), open it in a text editor and delete everything between and (that should be all down). This should solve your problem.

  Let me know what you find.

  A. Mert

  National Instruments

• How can I connect Server tfs2010 build agent 2008?

  How can I connect Server tfs2010 build agent 2008?

  Hello

  Support for TFS server is available on the MSDN Forum with some
  available also on the TechNet Forums questions.

  MSDN - TFS server
  http://social.msdn.Microsoft.com/forums/en-us/category/vstfs

  Answers does not support development or server problems.

  Rob - SpiritX

• Dell Server randomly abandons the connection to users.

  My Dell Server randomly abandons the connection to users in a building where the server does not find.  Different computers will sign the account and then randomly lose the connection to the server.  Thoughts?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure

  I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure

  I get the error message is could not reconnect account currently disabled mapped drive .so I remap the disk with the same user name and password and it reconnects

  * original title - Networking file sharing file sharing file sharing file sharing Fileshare discovery network shares mapped shared part readers *.

  Hi SCS PCs

   

  I would recommend checking the Microsoft TechNet community. Please visit the link below to find community which will support ask you in the right direction for the linked domain questions.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

   

  I hope this helps.

• WRT54G can not reset or see the config page.

  Hello. I have a wrt54g that I have configured previously, including wep and mac filtering.

  I have access to the internet.

  Today I noticed that I can't access router config (checked 192.168.1.1 is worn by ipconfig/all).  I tried to connect both wifi and ethernet with disabled wifi.  Under firefox and IE tells me the config page could not load, server not (or order) answer.

  No password or logon screen fails just load the page.

  I tried to reset the router by unplugging the router and all the cables of e'net. I pressed the button of reset for 60 seconds.  When I reconnected it it has rebooted without any reset... he had the same SSID and WEP key. ?????

  At first I thought it was a problem of W7, because I just upgraded, but I can't reset or access to the page of Firefox, chrome or my iphone. Maybe the router is bricked as config is concerned.   ?

  Any suggestions?

  What you have said above, you pressed the reset button with the unplugged router.  That will do nothing.  Plug in the router and wait 60 seconds.  With the power on, press and hold the button of reset for 30 seconds and then release.  Wait 30 seconds and now the router power cycle.  Connect with your wired computer to 192.168.1.1 empty user name, admin password and reconfigure.

• Access Point WRT1900AC & Firmware version: 1.1.10.167514, it cannot be accessed the config page.

  Hello!

  I am a new user of router dual-band WRT1900AC . The installation has been updated instantly to
  Firmware version: 1.1.10.167514
  Release date: June 30, 2015

  My WRT1900AC is configured as a wireless gateway.

  https://community.Linksys.com/T5/wireless-routers/WRT1900AC-as-wireless-access-point/TD-p/847286

  Also, I have disabled firewall and uPnP.
  A tutorial here:

  http://www.Linksys.com/us/support-article?articleNum=140371

  Everything works except that without access to the router config page.

  The problem is, I can't access my page to config WRT1900AC Wireless Access Point and the only solution is to connect temporary exit HAND ROUTER LAN to WAN WRT1900AC, can I access my AP

  (after restart of course). Change after I return the cable to the LAN again and restart WRT1900AC. This works.

  Yesterday, I spoke with live chat. I received recommendations:
  "Once the router is configured to bridge fashion, page configuration accessible only using its new IP address. The new IP address can be found on the main router DHCP table. It is because only in LAN - LAN, the

  WRT1900AC will be his disabled DHCP. »

  I also saw Table of customer routers main DHCP but I have not found the IP address of my wireless WRT1900AC Access Point there. I think it is a bug in the version of the Firmware: 1.1.10.167514
  Page config in the case of WRT1900AC Wireless Access Point is isolated or possible only thanks to the WAN WRT1900AC. It would be nice if someone confirms that and maybe in the next version of

  fix. :-) I have a beautiful smartphone App "Smart Wi - Fi" and I can not comfortably use it due to this error/bug.
  Otherwise everything works well and stably.

  inspire wrote:

  Hi chadster766!

  Thanks for your suggestion and a quick response. I have a feeling it would work then as you described. But how to set Internet settings in mode Bridge? I've already put a static IP address router IP address WRT1900AC. I see it with IP scanner.
  If I leave the cables as you suggest (hand router LAN to WAN WRT1900AC), the Internet does not work. In this case go to the config page, but Internet with other devices will not work. Also good Wifi, it works but can not access. How to set the Bridge Mode? (I think this is my problem in this scenario)

  IP address of the router (LAN):

  Connectivity-online-online details router LAN => Edit

  * If your main router IP subnet example is 192.168.0.x, then set the address of the WRT1900AC IP to an IP outside the range of the main router DHCP. Ex: 192.168.0.2

  Bridge mode:
  Connectivity-online Internet-online IPv4 settings => Edit-online Bridge Mode

• Building the bar file Hello World

  Hi, I have the ripple to package the files app for me, I get the message that the build was successful, but no .bar file does not appear in the specified output folder, just zip archive. Any ideas please?

  The error itself seems to be coming from a problem of JAVA virtual machine and tools require the latest version of JDK6 (32 bit). The format should not be a problem because you are on a 32-bit system, so the best recommendation I can do at this stage is to download the latest JDK6 (i.e. Java SE 6 Update 38):

  http://www.Oracle.com/technetwork/Java/javase/downloads/index.html

  You also need to either uninstall the existing JDK1.7 / JRE7 files, or you could also temporarily rename/move them to another folder to avoid any conflict.

  I think that should address the issue, but if it is not the case, I recommend also trying with the UAC turned down as it has been known to cause problems.

• Control of the configs

  I think to outsource the security of my businesses, anyone has the info services on what control it is to change the configs on the firewall?

  V6.2 PIX offers the possibility to control authentication and authorization for specific orders, either by configuring locally on the PIX itself, or on an external RADIUS server.

  The following link should tell you everything you need:

  http://www.Cisco.com/warp/public/110/pix_command.shtml

• Encrypt the password weblogic in the config.xml file

  Hi friends,

  I get the below error. while trying to start the administration server.

  < 17 November 2015 14:18:09 IST > < opinion > < Log Management > < BEA-170019 > < server log file /u01/app/orawls/product/fmw11g/user_projects/domains/ClassicDomain/servers/AdminServer/logs/AdminServer.log is open. All events in the log server-side will be written to this file. >

  < 17 November 2015 14:18:09 IST > < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: java.lang.AssertionError: java.lang.reflect.InvocationTargetException

  java.lang.AssertionError: java.lang.reflect.InvocationTargetException

  to weblogic.descriptor.DescriptorManager$ SecurityServiceImpl$ SecurityProxy._invokeServiceMethod (DescriptorManager.java:175)

  to weblogic.descriptor.DescriptorManager$ SecurityServiceImpl$ SecurityProxy.decrypt (DescriptorManager.java:192)

  to weblogic.descriptor.DescriptorManager$ SecurityServiceImpl.decrypt (DescriptorManager.java:114)

  at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:1092)

  at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:737)

  Truncated. check the log file full stacktrace

  Caused by: java.lang.reflect.InvocationTargetException

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  to weblogic.descriptor.DescriptorManager$ SecurityServiceImpl$ SecurityProxy._invokeServiceMethod (DescriptorManager.java:173)

  Truncated. check the log file full stacktrace

  Caused by: weblogic.security.internal.encryption.EncryptionServiceException

  at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:139)

  at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:187)

  at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:96)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  Truncated. check the log file full stacktrace

  I searched the support of oracle in this regard. In one mentioned to modify the config.XML and add either encrypted or clear text.

  I don't know how to change the file and that all entries have to be changed. I enclose the config file. Could you please suggest me.

  Kind regards

  Prates

  What doc id you are referring to? If you need to replace the password encrypted with password plain text in the config.xml file, just edit it with a text editor and replace the values starting with {ESA}.