Server Windows 2012 - printers will reappear after deletion

Similar Questions

• Problem installing VMWare Workstation on a Server Windows 2012

  Hello

  I have problems when trying to install VMWare Workstation on a Server Windows 2012. Windows Server is Amazon EC2 environment and a generic image extended release.

  The problem is that the installtion process fails because of "Hyper-V" during installation, but after investigating the option "Remove roles and features" I can see that it is not installed.

  Is there any fixes for this issue?

  I enclose three screenshots for you pleasure.

  Regards, Ray...

  Hello Ray,

  Welcome to the VMware community forums.

  You run an EC2 instance that has just 615 MB memory installed?

  It's kind of a weird for a host, much too low for Amazon memory configuration, even be profitable.

  I think that your server is running UNDER Hyper-V, for example. It is probably a Virtual Machine.

  You can easily check that yourself by running the script from this site:

  How Hyper-V to: detect if you are inside a virtual machine

  If it's a Hyper-V virtual computer then I don't think you can install VMware Workstation on the virtual machine and run the nested clients.

  You could do the opposite (invited running hyper-V in a workstation virtualized on vSphere) but is not very fast.

  As you have no control over which platform virtualization Amazon use for their windows servers, I'm afraid you will have to go for a dedicated server instead of a virtual machine.

  Hope this helps,

  --

  Wil

• where to find the download for 11.2.0.4 Oracle client, Server Windows 2012

  Hi all

  I was instructed to install 11.2.0.4 32 and 64-bit clients to Server Windows 2012.

  I can't find the download page for the latter.

  https://support.Oracle.com/epmos/faces/DocumentDisplay?_afrLoop=535798508932133 & ID = 1231433.1 & _afrWindowMode = 0 & _adf. CTRL-State = 8qqh4jwyv_58

  States that, fortunately, we can now use 11.2.0.4 32/64 bit client with 2012 (but does not tell us where!)

  So will OTN...

  http://www.Oracle.com/technetwork/database/Enterprise-Edition/downloads/index.html

  I don't see anything for 11.2.0.4 it - only 11.2.0.1, but 11.2.0.1 is not supported in Windows 2012

  
  

  Please, if anyone can direct me to the right page, I would be really grateful.

  
  

  DA

  https://support.Oracle.com/epmos/faces/DocumentDisplay?_afrLoop=539595172570209&ID=1454618.1&_afrWindowMode=0&_adf.CTRL-State=jt8f7go3i_142#aref_section21

• "Bcdedit-set {default} displayboot menu" does not-server windows 2012 R2

  Microsoft support cherish,

  I have windows server 2012 R2 running the Dell server 'PowerEdge R210 II', today found that the server suddenly unable to windows for lunch and when I tried to lunch the server it asks me to insert the CD of windows media and after that it stops popping to insert the support CD, and now it shows me an error "can not find script file c:\remindpopup2.vbs.

  I tried to access the windows safe mode and given that it is windows 2012 and after some googling, I realized that I need to activate the command line start menu since I can't access the windows.

  I insert the windows CD and using the option 'fix my PC' I managed to gain access to the command line so I tried to use the following command to activate the start menu

  bcdedit/set {bootmgr} displaybootmenu Yes

  but the operation did not succeed with the error below

  the boot configuration data store could not be opened.

  the volume of the file has changed on the outside so that the opened file is no longer valid.

  With kindness your advise how to solve this problem and please let me know if no need more details.

  Kind regards...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• File server Windows 2012, which version is the best?

  Hi guys

  I have to put in place a new file server 2012 which will be about 1 TB local storage and about 5 TB of storage which will be connected via iscsi, my question is will be a normal server standard edition 2012 with the role of server file you added the best solution or I have to look the edition of standard windows 2012 storage?

  Great, much appreciate if someone could clarify which of these options would be best?

  Thank you

  Clint

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• the desktop icons will reappear after reboot

  I have Windows 7 Home Premium 64 bit on Asus g60 laptop that I just bought.  I always hide my icons the desktop, but for some reason some they keep reappearing after I restart.  I do not think that this happens every time, but it happens at least at every restart of the 3rd.  It gets really annoying.  Even the "Show desktop icons" box is checked.  Help, please!

  Well, I tried what l1willia said, but it does not solve the problem.  I ended up uninstalling Power4Gear Hybrid and it seems to have solved the problem.  What piece of garbage that the software was lol

  Thanks for the comments and if it does not solve the problem permanently, I will reply to this message.

• Windows 8 Pro will sleep after 60 seconds of inactivity

  I just upgraded via a clean install of Windows 8 Pro. Now, the computer to standby / sleep after 60 seconds of inactivity. Interestingly, this problem occurs only once the machine has already gone to sleep once in this feeding cycle. In other words, if I start from a cold, start the machine will follow the diet plan appropriate (screensaver after 10 minutes, sleep after 2 hours) until what he went to sleep once, after which it will go to sleep every 60 seconds of inactivity.

  The system event log indicates "42 Kernel Power event: the system between sleep.". Reason to sleep: System Idle. "But it does after one minute of inactivity.

  I have reset all electrical energy plans, I created my own power management. Hybrid sleep is turned off. I have run the checker (sfc/scannow) system files and I've searched the forums largely unanswered.

  It is a customized desktop machine never had this problem on Windows 7, this is a new behavior for windows 8.

  So, after a lot of digging and try a lot of things, the solution below worked for me. But if someone can verify it worked for them, that would be great:

  It seems that maybe Windows to view the return of sleep as a remote activation which apparently expires to slow more quickly than the other wake ups. To change this feature, delete the following registry key: (perhaps using the power button to go back to sleep as suggested would be a work-around?)
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\238C9FA8-0AAD-41ED-83F4-97BE242C8F20\7bc4a2f9-d8fc-4469-B07B-33eb785aaca0\DefaultPowerSchemeValues
  To do this, Win Key + R (displays the run menu), and then type "regedit.exe" and navigate to the location of the key above. For more security, you need to save (export) this key before you delete it.
  Alternatively, you can change each of the secondary keys instead of remove them. Each corresponds to one of the power management. If you choose ACSettings you choose a behavior for when the machine is connected, the DCSettings are for the battery power. If you change the key switch 'decimal' value is in seconds and can be changed to any value you choose.
  Please see this post for more information: http://social.technet.microsoft.com/Forums/da-DK/w7itprogeneral/thread/6909b30f-f71d-4dc6-9c42-12db1d38944f

• 10 Windows compatible printers: printer problems after the upgrade to Windows 10

  If you're wondering what HP printers are compatible with Windows 10, see this HP support doc: Windows 10 compatible printers.

  If you re having a problem with your HP printer after the upgrade of your Windows 10 PC, printer problems after upgrade to Windows 10 could solve your problem. He treats all kinds of questions such as:

  • Cannot print after upgrading
  • Cannot parse after upgrade
  • Printer software installation & screen opens instead of HP printer Assistant
  • "HP solutions Center can not run" or "Scan is busy or in use" error with a network connected printer
  • Multiple display of printer in the HP printer Assistant names
  • Can not scan or fax with HP Solution Center after that disabling HP programs to improve performance
  • "Access denied" error change HP Solution Center print settings
  • Cannot print with a pilot integrated Windows (Africa, Asia Pacific, Europe and Middle East only)
  • Fax device are not not in the devices and printers connected to a USB printer
  • HP Printer Wizard does not open with a USB connected printer
  • HP Smart printing does not open in Internet Explorer
  • "Error-2081883401' poster during the uninstall of the printer driver.

  In the compatibility Windows 10 doc, follow these steps to quickly locate your printer:

  Click and scroll down to the section for your printer, then hold down the CTRL and F keys. When appears in the search box, type the number of printer model to automatically find your printer. TIP: find the numberof the printer. For example, if you have a HP Officejet Pro 8600 Premium e-all-in-one printer, open the Officejet section and search for "8600" instead of "Officejet 8600.

• Server Windows 2012 - best practices to create the template

  On Windows 2012, has anyone created models for this OS (VM)?

  If so, what services did you remove, disable or install or what changes did you make to create a model of 'Base '?

  Any ideas or suggestions?

  Thank you

  We have plenty of 2012, immediately, but I have bookmarked the blog post below it... looks pretty good

  http://www.Boche.net/blog/index.php/2012/08/16/Microsoft-Windows-Server-2012-tips/

• system tray icons will reappear after logout

  I noticed after a recent windows update, when I start my computer, not all my system tray icons appear.  When I logout and log back in will appear in the windows system tray icons.  This is beautiful work-around, is there a permanent solution?

  Hello

  · What is the number and the model of the computer?

  · What are the updates that have been installed?

  · What is the service pack installed?

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  See: Windows system tray icons: http://support.microsoft.com/kb/310578

• Windows Windows 8 does not properly after deleting important files to user (already tried everything I found things different from +-10)

  well, I'll start from the beginning.

  the first big mistake I did was change the permissions of the administrator until he was the same trustedinstaller (without this I wouldn't do stupid things, but I did it for a change of details in the registry)

  the strange thing that I've been in conflict with, is that this pc was my mother, so everything to his e-mail address and his name 'Nancy' after some time she gave me the pc so I made my own top user account named "maxim" (that's my name) on my email address and probably deleted the user account from my mother named Nancy so no problem until something has started to bored

  the usersection in solution under C: contained Explorer still card Nancy with some of its documents on the left and some (I have something windowsrelated files)

  so I thought why not remove that card and saw that a card with my name was there too in the usersection, these same unknown files which I think are windowsrelated (btw, these files were hidden but ofcourse to check everything I have chekced the area to see hidden files in Explorer)

  I know not the name of all the files that I have demolished within this named Nancy in user card, but as far as I know, is that files that I noticed (these hidden files) are 7 files ntuser and those who are also in the plan named maxim in this usersectionso I thought no problem and delete the files as managed (with edited permissions)

  now I certainly delete files that I wasn't allowed to, and who were required to run windows properly, I know that, because of the errors, I am when I try to start things or when I try to fix things

  now I searched a LOT on the web especially in the microsoft forums and I fount a lot of 'solutions' that did not work for me

  most of the time, it was because I get an error because I could not more process these configurations etc.

  and somethimes as the scan SFC, he said that the correction of some problems, but there are many problems left that cannot be repaired in this way

  also almost everything I'm doing atm (also when I try to fix my problem) that I have to do with a big traverse most of the time I use "this run dialog box" or the command prompt

  now, these are all the things I tried

  -each 2013 thing tuneup utilities can do (scans included registery) of course I don't know the exact names of the files important I lost so I couldn't those used with tuneup

  -do you have some full scans with Norton 2013 (did not find any problem)

  -does this scan SFC and said there are still problems and has not noticed any difference

  -tried to update my pc did not work (missing windows services)

  -a tried to restart something in the registry did not work (missing windows services)

  -tried to make a new user on my pc did not work (missing windows services)

  -also tried lots of windows, fix things program (I forgot the name of it, but he could only tell me that he had problems and could not fix their)

  I'm shure that I have tried many other things so I mentioned in any case but I forgot the

  Many thanks if someone can help me out as sorry for the great story, but I wanted to tell all I know because it's a sensitive issue and please don't mind my bad English :)

  Maxim

  Your Windows product key can be printed on a label located on the underside of your laptop, if you don't you won't have it. Using the recovery partition, it is a good idea if you have no recovery on a disk media, often there is a Windows repair option, you can try this, however if there is no data on the first partition that you interested, I recommend you just format the partition for essentially erase everything on it and reinstalling Windows on the recovery partition. This will probably not require you to reactivate Windows by using the product key.

  If you cannot use the recovery partition to reinstall Windows, then you can go to this page (on the computer that is working properly) http://windows.microsoft.com/en-us/windows-8/upgrade-product-key-only and click on install Windows 8, save the file, run it and choose Install by creating media. This you will get an ISO file that you can burn on this disc you mentioned, just put the disc in your computer, right click on the ISO file and choose burn. It should also not ask to reactivate Windows, if you did no major hardware changes to the computer.
  Again, I would like to know if you need help with any of these steps or if none of these steps work for you.

• Server Windows 2012

  Hello

  I have a little problem and I don't know how to fix it, please help me.

  I want to set up a file/print. I installed Windows Server 2012 Standard on a HP micro server, and this is my problem. I can't see the server on the network. The rest of the clients (computers laptops and desktops with windows 7/10) can meet, can their auto ping, can access, only the servers that are not accessible. Also, from the server, I don't see the rest of the customer. The network on the server works, I can do browsing the internet of him, I can't access the client. Also I can ping the server from the router and the router to the server.

  Thank you

  Best regards

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Server Windows 2012 R2 console installation no video card

  Is there any Tunis on how to install windows server by using the serial console, when you do not have a video card?
  I have a ISO accessible via an external DVD drive.

  Sorry.Wrong forums. Windows Server issues should be here:

  TechNet - Microsoft forums

• Error: DDE server window not close do not after downloading using FireFox

  I have the same problem.

  on my machine, it happens every time after I used firefox(3.6/4.0/5.0) download whatever it is, when I click on download link firefox is no answer.  then I stop windows I'll see this box.

  Hi ucudbm,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. The problem occurs only after the use of Firefox on your computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails then I would suggest you contact Firefox support for more information.

  http://support.Mozilla.com/en-us/home

• Set the name of the network on a Windows 2012 without Active Directory Server

  I have a Server Windows 2012 I use for DHCP, DNS and NAT on a network without a domain controller, and I don't want to create a domain.

  When my Windows 7 clients connect, they identify the network with the name of 'network '. Is there a setting on the server, Windows 2012, that will allow me to change the name that clients identify the network with? I want something that is on the side Server and not to go and rename it on each client manually.

  I noticed low-end devices how as access points, modems etc use their own custom network that clients identify their network with, so I guess it cannot be something too difficult...

  Thank you in advance.

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/