service packs not shown as part of windows update
Hi, I use windows vista Basic. When I check the windows update it shows so far, but there is no installed on my computer serivce Pack. Why is it so.
service packs should be not part of the windows update control
Thank you
Updates Windows does not display normally the Service Pack update until all other updates are installed - simply install all important updates, and then click Check for Updates, and repeat until you get the Servie Pack offered.
Tags: Windows
Similar Questions
-
vCenter Server service does not start after you run Windows updates
On a regular basis, my vCenter Server service fails to start after the automatic updates of windows are applied. The vCenter server is a datacenter 2008R2 VM.
The only other running applications are PerfectDisk and agents of ESET NOD32 - vCenter is in 4.1. I tried to adjust the vCenter Server and WedAdmin service of delayed start, but that doesn't seem to make a big difference. The following errors are displayed in the case of the newspaper which lead me to think the issue is related to SQL:
SQL Server is not ready to accept new client connections. Wait a few minutes and try again. If you have access in the error log, look for the informational message that indicates that SQL Server is ready before trying to connect again. CUSTOMER:: 1
The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event is on another computer, the display information had to be saved with the event.
The following information has been included in the event:
Could not initialize the VMware VirtualCenter. Closing...
the message resource is present, but the message is not in the string/message table
Anyone encountered this before?
Hello.
I didn't know this, but the info in Ko 1007669 may be useful.
Good luck!
-
I have the cd of Service Pack 1a is sufficient for restall windows xp?
I have the cd of Service Pack 1a is sufficient for restall windows xp
If what you wrote is an accurate transcription of what is on the CD, then you have a CD with Service Pack on it and not a Windows XP installation disc. It is pretty easy to find - put the disc into a computer and see what happens! MS - MVP - Elephant Boy computers - don't panic!
-
My Word service pack download is blocked when trying to update a service pack for office
My Word service pack download is blocked when trying to update a service pack for office
How can I stop it I have and not because of the upgrade for some reason, it does not?
Thank you
Mike
Hi Mike,.
You are able to install other updates to Windows?
You can follow the General troubleshooting steps that helps solve the problem of Windows Update.
Method 1:
Run the Windows Update troubleshooting tool.
If your computer is experiencing problems find and install updates of the operating system, try using a troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.
Please follow the steps below to run the Windows Update Troubleshooter.
(a) key Windows + W key set.
(b) write the Troubleshooting in this search field on the upper right.
(c) click the Troubleshooting option after the search.
(d) click the option show all present on the upper left.
(e) select Windows Update and follow the steps that are invited to perform troubleshooting.Method 2:
You can download and install the update manually from the Download Center using the number of the update.
In addition, if the question is limited to the Microsoft office program then please ask your question the link desktop stand for better assistance.
Hope the helps of information. Updated with the status of the issue.
-
Automatic updates of Windows
This security update is constantly appearing: a security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430) I successfully download the update and then it reappears to be downloaded again.
See the sections «How to get help...» "and 'known issues' here:
http://support.Microsoft.com/kb/954430Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
For enterprise customers, support for security updates is available through your usual support contacts.
Read also: http://support.microsoft.com/kb/941729/Hope this helps, Vincenzo Di Russo
Microsoft® MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003.
My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo -
NET framework 3.5 service pack 1 & net framework 3.5 family update for the net version 2.0 to 3.5 (kb951847) x 86(update1 of 1)
Hello
1. what exactly is the problem you are having?2. do you have an error code?
3. do you get an error message?
I suggest you install the standalone product of the update and check if it helps.
Microsoft .NET Framework 3.5 Service Pack 1
You can download the stand-alone version of the link below: Microsoft .NET Framework 3.5 Service Pack 1:Microsoft .NET Framework 3.5 Family Update for Windows XP x 86 and Windows Server 2003 x 86
http://www.Microsoft.com/en-US/Download/details.aspx?ID=10006For reference:
When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
http://support.Microsoft.com/kb/923100Problem installing .NET Framework 3.5 or 3.5 SP1 on checked, or pre-release versions of Windows Vista or Windows Server 2008:I suggest you to give us more information about the issue to have a better understanding.I hope this helps. -
Error code 80070005
I was not able to receive the Windows Update since February 2012. I have a Code error 80070005. What can I do to fix this?Hello
Have you made changes on the computer before this problem?
Try the following Microsoft article and see if it helps.
Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update: http://support.Microsoft.com/kb/968003Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry -
Do not open programs after installing Windows update operating system Windows Vista
Original title: MS Office programs do not open after installation of Windows update to Windows Vista operating system
After having decided to install the Windows Update my computer told me was available all my software as my programs MS Offfice is no longer open. I don't know what to do. The only thing that still works is the Windows Media Player. I can't open Word or Excel, I can't access my photos. Open Internet Explorer is like a weird nightmare but I am able to access the Internet. I tried reinstalling my MS Office software, which did not work. I have no idea what to do to solve the problem, but I need my computer back. It was good except for its slow, when I open certain programs, now I can't access something. Any ideas what I should do to correct the nightmare?
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understand the Extras in Windows Vista and Windows Update info is at the link above.
Remove the Vista updates; two ways to do this:
1. a System Restore to before the updates:
Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next
If you use Norton, disable it before using the system restore.
If it is impossible to enter the Normal Mode, do a Safe Mode system restore:
Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.
System restore steps according to the info above.
Also:
2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window
> then click the one that you don't want > uninstall will appear at the top > uninstall it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it
> Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".
When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.
> or if you do not need an individual > right-click on > UAC prompt > hide it
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For questions of office:
http://answers.Microsoft.com/en-us/Office/default.aspx
Office at the above link forums
Theywill help you with your office questions when repost you in the Office Forums above.
See you soon.
Mick Murphy - Microsoft partner
-
Hello
I have a year old Acer Aspire 5720 with Microsoft Windows Vista installed on it. Windows Update said I had to install a Service Pack, and when I let it go automatically everything seemed fine and update 3/3 went to 100% and then rebooted and said 'not installed the Service Pack. Coming back has changed. Do not turn off your computer. "This screen for hours or as long as the computer is turned on. I can't access either safe mode. The computer came with an installation CD. I can access the recovery menu by pressing F8. My stuff is not backed up either and I can't access it and I am really worried!
Looking forward to your help!
Kind regards
Sher
It's fixed! After about 3 days trying to solve this one!
Acer E tool safety program was causing some issues, preventing the updated files to a proposal!
Get rid of it, reboot and install SP2! :)
-
I have never had a problem with my computer before updating. I looked at various sites in regard to this problem and have noticed that a lot of people's problems with this update. Windows Installer Clean Up tool has failed. I also tried to install this through my anti-virus and that didn't work either. It is a complete mystery. Any help would be appreciated.
Thank you
roadbowler74,
Thanks for posting on the Microsoft Answers community forums. We want to help you solve your problem with the installation of service pack 2. There are several things that could cause this problem. Here's an article in the knowledge base that has some tips troubleshooting step by step for this specific problem:http://support.Microsoft.com/kb/947366
How to troubleshoot the installation of the service pack, Windows Vista and Windows Server 2008 issues.The article is too long for me to post this here, so I do not say that you read and follow the steps as it should help you solve your problem. Please let us know if you need more assistance.
Thank youGloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
My OS is XP64 SP2. I tried to update several times without success. I also downloaded the Service Pack 3 (KB936929) Documents and Windows but could not install. I'm normally more patient in waiting for Service Packs to appear as updates, but I want to move to the installation of 64-bit Windows 8.
You also cannot upgrade Xp to Windows 8. You must perform a clean installation. See the upgrade of Windows 8 paths.
-
This problem started with no changes made on my PC. I used a Webroot antispyware and combination product of anti-virus for more than a year. The shield icon now appears in the lower right corner with the message that I need to download the update. When I did the update, the shield of gold disappears for 20 seconds approximately and then reappears. Concerned and confused about this issue. Have spend most of the day trying to research on the problems of the various online sites. Any help would be much appreciated. Thank you.
Hello
Since that he has already installed several times, I was hiding these updates in Windows Updates-
Click on in Windows Updates - HIDE (if they are still pending)How to hide or show an update of Windows Vista
http://www.Vistax64.com/tutorials/72491-Windows-Update.htmlThen run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058-----------------------------------------------------
If necessary:
See this thread - try Srinivas fix (patch XP Vista version)
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/7de4b30a-40c6-445A-9392-28be9f92f5cf/More here if necessary:
An update is available that improves the compatibility and the reliability of Microsoft XML Core
Services 4.0 Service Pack 2 on a Windows Vista-based computer
http://support.Microsoft.com/kb/941833See known issues and if necessary how to help him get to the sections here:
MS08-069: Description of the update of security for XML Core Services 4.0: November 11, 2008
http://support.Microsoft.com/kb/954430Update of security for MSXML 4.0 Service Pack 2 (KB954430)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=96a4413c-5261-4f69-83d0-932c430abd14&displaylang=en---------------------------------------------------
If necessary:
KB954430 is a security update in order to get assistance directly from Ms.
Since this is a security update, you can get free Support
http://www.Microsoft.com/protect/resources/support.aspxGood luck.
Rob - bicycle - Mark Twain said it is good. -
Cannot install XP service packs - not enough space error
Hi, Gilchrist, I lost my XP Pro according to the headder. When I try and reinstall it from the original disk, XP pro installed. The problem is when I try and install SP2 or SP3 States screen that there is not enough hard disk space. He reads that 2012 mb instead of the 6.45 GB. All ideas now to overcome this obstacle.
Best regards.
* Title *.
Problems reinstalling with XP pro after April 21 of McAfee update debachle. Inability to read 6.4 GB hard drive.Have you contacted McAfee Support help yet?
The foregoing despite...
Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that another repair facility (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxOther useful references include:
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121cHOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2bTip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029
NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs Windows or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 must be installed).
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Risks & benefits of P2P file sharing
http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspxMeasures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
Or start a new thread in this forum for further assistance: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I need XP Service pack 3 after fresh XP installation but update does not work
I'm having a nightmare. Tried to install a copy of Windows Office 2010 via the company's offer. Reinstalled XP like kept crashing and couldn't get to restore brfor it crashed.
Now the updates will not work.
Help please
After installing Windows for the first time, it is recommended to update and run antivirus software and once the update has been completed, and then start installing programs.
If you have any problem with the Service Pack, you could get it from:
http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs
-
XML service pack 2 KB954430 & 973688 repeatedly proposed in updates and will not be installed
original title: XML 2 KB954430 & 973688 service Kit will not download. It is said there but keeps returning to the updates for the computer?
XML 2 KB954430 & 973688 service kit will not download. It is said there but keeps returning to the updates for the computer?
Although updates given the examples on this page are different from the ones to be revived to your system, the underlying issue is the same - security for Microsoft XML Core Services 4.0 Service Pack 2 updates can appear several times in the update on Microsoft Update or Windows Update listcheck to see if the KB954430 and 973688 appear in Add/Remove programs in Control Panel.
If they are, to uninstall and do NOT install the updates through Windows Update.
Instead, download and save them both from Microsoft Download Center.Update of security for MSXML 4.0 Service Pack 2 (KB954430)
Update for Microsoft XML Core Services 4.0 Service Pack 2 (KB973688)Configure XP to the clean boot - How to configure Windows XP to start in a "clean boot" State
If a 3rd party firewall was used previously, then disconnect the internet connection system is while you install the updates as all firewalls 3rd party is disabled in the clean boot state.
First install KB954430, restart the clean boot state even if demand, then install KB973688.
Cancel the clean boot procedure, restart in normal Windows mode.If KB954430 is always available to the system, then suggest that contact Microsoft for assistance in getting it installed.
- MS08-069: Description of the update of security for XML Core Services 4.0: November 11, 2008"How to get help and support for this security update
For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
North American customers can also obtain instant access to unlimited support free of charge e-mail or unlimited individual chat support by visiting the Microsoft Web site at the following address:
Maybe you are looking for
-
Plugins do not update on firefox 29,0 on Mozilla plugins page
Hi all I've recently updated to FF29 FF28. I check the updates of plugins once a month. In the Add-ons Manager, I click on the link "Check to see if your plugins are up to date" and brings me on the Mozilla site (https://www.mozilla.org/en-US/pluginc
-
Hello So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or w
-
Pavilion Desktop PC p7-1414: DVD will not play video
All of a sudden my DVD will not play on my computer. DVD will play the data but not video. Check Device Manager, which States that the device is functioning properly. Insert other discs that have always played, but now they are not. Videos will pl
-
Hello guys-Lenovo I plan to install an SSD in my Lenovo laptop, L420. But I don't know if the SATA port will support SATA 3 (600 MB/s), if it only supports SATA 2, I think think I would consider buying a new laptop. Another quistion: is it possible t
-
To enlarge a window defines the type of window that is too big to see all of the graphics. Under display properties to allow the resolution to be changed but that did not help at all. Update the bios does not work either. XP updates did nothing.