Services in Dev, UAT and production shared environments

Similar Questions

• Migration of code (Development) Dev to Uat to Production (performance) (Development)

  Hi all

  I want to know what is the best approach to migrate the code migrate from Dev Environment for Uat environment then scenerio in Production (delivery Type)

  I would like also to master all repository approach knowledge & creating repository without conflict of id internal while migration of work object.

  Thank you.

  Arun

  There is a lot of documentation out there about the repository ID number, but in short:

  1. Ensure that your deposits in each environment have unique IDS when they are created. One method that can help with different environments is to ensure that standards are numbered from IE a unique range of all repositories in DEV ID assigned to the range of 100 to 199, UAT 200 to 299 and 300 to 399 PROD. It is easy to deduce the ID of environmental objects have been created.

  When the migration of objects DEV--> UAT--> PROD, I would say that it should be never rest the scenario. You must migrate design time objects because all your development should be limited to the DEV, including corrective measures that may be taken following UAT. Also this approach greatly simplifies the migration activity. However if you are to move objects of design to the UAT time, not recommended, then make sure that:

  1. When you migrate objects between environments make use of Smart Export / Import, which was introduced in 11 g so that you get all of the dependencies of the object.
  2. Import using mode synonym insertion/update to keep the source of the migrated objects.
  3. Your logical architecture is uniform in all environments (true regardless of whether you are migrating design objects or some scenarios)

• Notice of default on Microsoft update for product SQL Server 2005 Express Edition Service Pack 3 (KB955706) and the 0x2B2F error Code

  I get a failure notice when trying to make an update of Microsoft for the product SQL Server 2005 Express Edition Service Pack 3 (KB955706) and 0x2B2F error Code.  What should I do?

  Deana E Hi,.
   
  Welcome to the Microsoft Windows answers Forum community!
   
  You receive the 0x2b2f error code when you use the web sites, Windows Update or Microsoft Update to install SQL Server 2005 Service Pack 3 on a computer with MSXML6 Service Pack 2 is already installed.
   
  Follow this link for the reasons: http://support.microsoft.com/kb/970674
   
  Follow the steps in the link below for "SQL Server 2005 Setup fails when MSXML Core Services 6.0 Service Pack 2 has been installed"
  http://support.Microsoft.com/kb/968749

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/
   
  I hope this helps!
  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Impossible to activate permanent "network discovery and file sharing" in advanced sharing without turning windows firewall at the wide service.

  Environment:

  I have a workgroup Windows 8 pro PC with all updates from Windows update. The PC is connected via WiFi (home) to a router (the same thing happens if I am connected to the router directly via RJ45). It's my "private network (NAT). I have the Windows Firewall is enabled in its default configuration. I use "Windows Defender" as my protection\firewall of virus software.  "When I go to: change options for sharing different network profiles" under advanced sharing options. I try to turn on file sharing and network discovery in the private profile. It shows that "the private sector is the current profile. The radio button lights. However, when I go to the file Explorer / network I got the message ' network discovery and file sharing are turned off. " The network computers and devices are not visible. Click here to change... " I click to change, however when I click to change it keeps returning and gives me the same message. I then go in ""network control and Internet\Network and sharing Center\Advanced sharing settings " and the option buttons in private profile for the network discovery and file sharing are turned off."

  If I turn off the Windows Firewall. Everything works. I need to open a hole in the windows firewall for 2 applications was discovered and network file sharing. I opened rather not just blindly ports. However, if this is the only solution, what ports do I need open.

  Hi all

  I have exactly the same problem.  (and I'm not the only one. - There are many!) The problem does not lie with the Windows Firewall. If I turn it off, discovery network and file sharing is turned on-tour he turn it back on and its all disabled subsequently and the rest of the way.  I've been round and round the forums of the world looking for a solution but still find a definitive answer. Can certain software engineering in Microsoft Please arrive at the correct answer.

  Thank you very much

  PT.

• Update for Background Intelligent Transfer Service (BITS) 2.0 and WinHTTP 5.1 (KB842773)

  Update for Background Intelligent Transfer Service (BITS) 2.0 and WinHTTP 5.1 (KB842773) did a new install of windows... trying to update and it always fails to download... even small jets of microsofts help page and downloaded it... says file is corrupt... tired of this fight to get the puter back up to date

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that give repair install (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my list of network services is turned off and it won't turn

  my list of network services is turned off and it won't turn

  do you mean;

  the list of devices on your network?

  in network and sharing Center, Center

  advanced sharing settings

  turn on network discovery

  then try a reboot... see if this leads him to the top.

• Error 0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  Original title: "home network".

  0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  That's what I get on my ThinkPad when I try to do the networking. I placed all the parameters correctly: all 3 of my computers are set the same. 2 workstations work perfectly. They can even see the laptop but not to open all files. The laptop can, open same network t itself file. But he can see the whole of the network (including a printer, is told by the way). I, ve gone through all parameters twice. I've even set the C drives to share via the menus of context on each computer. I have visited many forums with none even come close to this problem (they all will tell you how to set the network parameters or they get very technical and over my head).

  I tried with & without a firewall.

  No password.

  I use a wired network.

  Laptop & 1 desktop computer running vista - 1 desktop computer running xp.

  They have all the latest service packs ms & udates.

  Any help will be appreciated.

  These files can be opened by norton or lenovo network setting apps. The settings do not work only in the application of network of vista. Nor can I work norton or lenovo from other computers.

  PS how can I ensure these settings effect may just lan and do not extend to the internet?

  Thank you bb

  I tried new drivers & returned through sharing & permissions, according to Jack, but he was not good. At the level of experience of my computer I can miss something obvious, but I doubt it because I've been very careful in following the instructions. I am experencing other problems with this laptop as well and I'll just get all. I am planing to get back anyway, that's why I needed network. I wanted to Exchange files over the network to avoid having to ' wait & swap "usb drives. Thanks anyway. Thank you BB bb

• File and Printer Sharing for Microsoft Networks-problem

  Hi all
  I use pc (vista HP 32 bit) sharing-i ' ts works great except one problem:
  what I do, the check mark of V in "sharing files and printers for Microsoft networks".
  is disabled / be empty after each reboot of the pc - and I have to manually check and click OK again.
  How can I fix this and make "File and printer sharing for Microsoft networks" checked permanently?

  (I use the network server private & computer browser Services work. I do not use the password protected sharing)

  Thank you

  http://www.Vistax64.com/attachments/tutorials/2609d1232212061t-file-sharing-turn-off-network_connection_properties.jpg

  problem solved:

  It was Lenovo access connection network for lack of security settings.

  Thank you

• Network discovery and file sharing will not stay

  The bar notification on the screen of the network in Windows explore said that discovery of the network and file sharing are turned off and click to change. After a right-click and by turning on the network discovery and file sharing, the notification bar appears again and said the same thing.

  I have ensured that the services are running, and appears not to have solved things. I am able to ping other computers that I know are on the network.

  I didn't have this problem until a few days ago, and the strange thing is that I am able to access other computers on the local network via the \\computername method. However, access my computer from other computers or devices miss you

  Any help would be greatly appreciated. Thanks in advance.

  I realized that guys on my network have not been able to ping - me, so I did this:

  http://superuser.com/questions/375100/what-happened-to-my-predefined-rules-in-Windows-Firewall-how-can-i-get-them-b

  I activated adding predfined advanced and enabled firewall rules all incoming and outgoing in the file and printer sharing. Now, everything works fine.

• Windows 7; Windows firewall prevents the discovery network, files and printers, sharing, public folder sharing and streaming media

  Windows Home Premium SP1, completely up to date.  Windows Firewall is enabled.

  Try to keep the file sharing and printers on a home network.  Try changing the settings on the control panel; All Control Panel items: Center network and sharing; Advanced sharing settings.

  When I try to change the option buttons for sharing, then click on save changes at the bottom of the page, the screen jumps to the network and sharing Center.  Object entering the settings advanced, no parameters have been recorded.   The comoputer restarting does not help.  I checked that the following services are running and set to automatic according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-turn-on-network-discovery-and-media-streaming/98654e71-4bff-4dd3-acec-ffc3524d44a4;

  The base filtering engine
  DNS client
  Function Discovery Provider Host
  Function Discovery Resource Publication
  HomeGroup listener
  HomeGroup provider
  Server
  SSDP Discovery
  UPnP device host
  Windows Firewall

  When I stop the Windows Firewall service, I can activate the sharing I want.  Of course the windows firewall prevents sharing I would do on my network.

  I'm uncomfortable with Miss having a firewall work on my computer.  How to configure my Win 7 machine windows firewall to allow communications with my homegroup?  I tried to restore the default values.  This did not allow the communication.  I tried to find the homegroup settings in the advanced settings of the windows firewall.  No luck there.

  What should I do to configure my windows firewall to allow network discovery and file sharing of printers and media streaming and sharing?

  Hi stephanie,.

  Thanks for joining us out on Microsoft Community Forums.

  Looks like the Windows firewall prevents the discovery network, files and printers, sharing, public sharing of files and streaming media. We will analyze and identify the cause of the problem.

  You have a third-party antivirus installed on the computer program?

  Method 1:

  To turn on network discovery
  
  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the left pane, click on change settings for sharing advanced.
  2. click on the chevron to expand the current network profile.
  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide
  confirmation.

  The article below explains all about the network discovery:
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  If any of these responses not solve the issue, let us then run the sfc scan and check if any file system is corrupt. I also recommend to perform a clean boot in order to find the root cause of the problem.

  Method 2:

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:
  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833

  See also:

  Open a port in Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/open-a-port-in-Windows-Firewall

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/allow-a-program-to-communicate-through-Windows-Firewall

  Hope this information helps. Get back to us if you have more queries about Windows.

• Support Microsoft OAS service told me that my product ID is expired, why?

  As you probably know, when we try to solve some problems using the Service Support of Microsoft OAS, we must give our product ID (Product ID) in the product ID text box.

  Here is the link
  https://support.Microsoft.com/OAS/default.aspx?St=1&as=1&as=1&TZONE=-390&Gprid=14019×tmp=634410134984742505&PS=1&Acty=ProductList&CTL=ProductList&WF=PID&TRL=PID ~ ProductList & sd = gn & c = SMC & ln = en - us & prid = 13193 & gsaid = 598988

  My problem is that the service told me that my product ID is expired. What happened to my product ID. My OS is Windows 7 Home Premium Retail License. I am very sure that I bought this OS with legitimate license. That's happened? Help me.

  Please do not confuse Activation and Validation - they are two very different things.

  Your error is defined as "ERROR_INTERNET_NAME_NOT_RESOLVED" - nothing more - and it shows that there is a problem with the resolution DNS of the internet name of the service requested. Maybe it's a problem either at your ISP (or level of Government), or it can be a problem on your local network.

  Please check your local firewall and see if that solves the problem - if you are behind a NAT router you can try to disable the Windows Firewall (or another firewall on your PC) and see if that helps.

• My plan has expired and when I go to my account / plans and products, near my plan is written "Expired" but...

  My plan has expired and when I go to my account / plans and products.

  near my plan is written "Expired" and "for a reactivation update your payment details" I'm doing this, but nothing happens.

  Even though I have the message: "Thank you. Your payment details have been updated and you can use the plan right now. Your invoice will be issued soon. »

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I want to cancel my membership and I'm not offered the "manage plan" button in the section 'plans and products. [was: If Adobe failed.]

  I want to cancel my membership and I'm not offered the "manage plan" button in the section 'plans and products.

  Hello

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

  Kind regards

  Sheena

• How to separate Testing and Production .fmx in the application server

  Our application server, we have only a single installation of forms. This means that we don't have a single directory for .fmx and these files are used by users to test and production. If a change has been made, it will have an impact on both environments and is not ideal.
  
  How can we separate executable forms without having to install another instance of forms or with minimal impact? Should what configuration files I copy or reconfigure? Pls advice on the steps to achieve this. Thank you.
  
  Published by: user12057612 on January 13, 2010 14:30

  If you set workingDirectory, forms will investigate your module first in workingDirectory, if she is not found it will check FORMS_PATH in file approx.
  Search for modules order is
  -WorkingDirectory (in formsweb.cfg)
  -FORMS_PATH (in the .env folder)
  -ORACLE_PATH (in the .env folder)

• Need help to synchronize the pre-production and production box init parameter

  Hello
  
  I have a HP - UX 11i production database. The database is the CARS with 3 instances. The storage is on ASM. Recently, we have created a database of pre-production for tests on RedHat Linux 4 worm. Here are the details of the environment 2:
  
  Production: HP - UX 11i, 24 GB of RAM, 8 CPU, Oracle 10g R2
  
  Pre-production: RED HAT ver 4, 16 GB RAM, 4 CPUS, Oracle 10 g R2
  
  Basically everything in creation the two environment are not identical configuration. Now, I need to bring to the pre-production environment in harmony with the environment of Production from the point of view oracle init parameter. I have listed down below below the parameters that is different. Please tell me how many of these parameters can be bring in sync. Setting shmmax doesn't set on the two core area is 4 GB.
  
  Name of the parameter of V$, value on Production - value on the pre-production
  -----------------------------------------------------------------------------------------------------
  cpu_count----------------------------------8-------------------------------------     4
  CURSOR_SHARING - EXACT - FORCE
  db_recovery_file_dest_size - 32212254720 - 15032385536
  dml_locks----------------------------------1472----------------------------------748
  fast_start_parallel_rollback - LOW - FALSE
  filesystemio_options - asynch - no
  LARGE_POOL_SIZE - 33554432 - 0
  log_buffer - 14493696 - 7012352
  log_checkpoints_to_alert - TRUE - FALSE
  open_cursors - 1000 - 300
  parallel_execution_message_size - 2152 - 2148
  PARALLEL_MAX_SERVERS - 160-80
  pga_aggregate_target - 2147483648 - 1692401664
  processes----------------------------------     300-----------------------------------150
  session_cached_cursors - 100-20
  sessions------------------------------------     335-----------------------------------170
  SGA_MAX_SIZE - 5368709120 - 675282944
  SGA_TARGET - 3221225472 - 675282944
  sql92_security - FALSE - TRUE
  standby_file_management - MANUAL - AUTO
  transactions - 368-187
  UNDO_RETENTION - 10800 - 1800
  
  Thank you

  NOTE: You must be a query V$ PARAMETER ISDEFAULT = "FALSE" only to identify the paraemters which are or have to be defined.
  You must identify these paraemters which are explicitly defined by the DBA, rather automatically determined by Oracle.

  1. you do not explicitly set or change cpu_count. Let Oracle automatically set it based on the number of processors / cores he sees as being available. (if you have multiple instances of database on the same server, each instance will 'see' the same number of processors / cores)

  2 cursor_sharing must always be the same development, pre-production and Production. However, I would first of all ask allows you to determine why it has been set by the dint of Production. That must be done only after careful consideration and test!

  3 db_recovery_dest_file size is relevant for backups RMAN identified by db_recovery_dest disk space. If it is not relevant to this discussion.

  4 dml_locks, sessions, transactions, etc. are all automatically determined by Oracle based on the PROCESS.

  5 fast_start_parallel_rollback is irrelevant. I wonder why it has been explicitly defined?

  6 filesystemio_options really depends on your platform. HP - UX 11i and Redhat Linux are very different.

  7 are defined explicitly large_pool_size and log_buffer? Or they remain to be determined automatically by Oracle based on other parameters (SGA_TARGET for example)?

  8 open_cursors, generally not be set unless you have an application that really opens up very many cursors by session. Why is defined differently? It is a per session setting.

  9. I suppose that parallel_max_servers is not explicitly defined, but remains to be determined by Oracle based on other parameters (for example cpu_count).

  10. I wonder if parallel_execution_message_size has been explicitly defined or is automatically defined by Oracle and OS dependent.

  11 pga_aggregate_target would have explicitly set the appropriate value based on your hardware and its use must be determined.

  12 session_cached_cursors generally didn't need to be explicitly defined. If it is set, why he is set on these different values?

  13. Why is SQL92_SECURITY explicitly different?

  14 standby_file_management is not relevant here.

  15 undo_retention could be about the same.

  Your REAL concern should be the values defined for CURSOR_SHARING and SQL92_SECURITY. These are the only ones who are really identical in both environments. The others are "setting buttons" while these "fix"behavior ".

  Hemant K Collette