Set the active notification profile

Similar Questions

• How to set the correct color profile

  From the outset: I am not an expert in this area...

  When you look at on the Internet on the management of color, color profiles, I often get a lot of text and generally intended to the "experts."

  Actually I am not so interested in all the technical details. I'm looking for rather a simple statement about how 'set' a default color profile.

  I don't know how my .icc profiles to select from...

  Material:

  Printer: Epson WorkForce Pro WF-5620 (with its color profiles)

  Monitor: HP DreamColor Z27x

  Photoshop CS6

  Windows 10 x 64

  At the launch of my pc, the monitor shows that it is set to AdobeRGB.

  Questions:

  (1) when I browse using Windows Explorer simple .png files (png with no EXIF data files, say, screenshots, or images on the Internet) and drag them in Photoshop, they are much darker and I need to make an adjustment. Which shows the Windows Explorer is about right, in Photoshop, they are much too dark.

  (2) when, after having created a PSD in Photoshop and everything seems correct, print results are bad, they are too light and I need to try to waste his time with profiles or almost to try to do things.

  Below some screenshots:

  

  =

  

  =

  

  ==

  

  =

  Anyone could pleasssee... to help and give me some advice on how to implement?

  i.e. the profiles to choose where so the results on the screen are the same as that of the print.

  again, I am not an expert and I do not wish to become a :-)

  There are so many profiles to select from, I don't know...

  Thank you!

  =

  Mylenium says:

  Simple answer: none of this is important if your system is not actually calibrated. You can set the default factory profiles all day and wear yourself out, and they will always be wrong.

  Bit of a negative attitude, wouldn't you say?

  It is not as complicated as many will have it. You think, always, in terms of source and a destination profile. You still need two profiles, and each should be a precise description of the color space that it represents.

  So, what is your source? This is your file. Fine. Adobe RGB, do, don't mess with it. Do not confuse the profile document and monitor! You need both.

  Then you have two destinations, the monitor and the printer. Each profile a detailed description. The monitor profile is implemented at the level of the system (or your Stallion will do), and Photoshop will find and use it to display the image. Again, it is a source of right > conversion of destination. Once the monitor profile is set up, no further user intervention is required.

  Then, the printer. Here you have different profiles for different media, and there is no default. You must choose the correct profile for the paper that you are using in the Photoshop print dialog box. Here you will need to also make sure that Photoshop manages colors, and then you must go to the printer driver and make sure that the printer color management is turned off. Choose the right paper here, since it controls the total amount of ink.

  That's all. If all profiles are present and correct, display and printing should now match. If you want to go further, you can set your monitor calibration target so they correspond to the document that you print on - IOW put the point of the white screen then that it is a Visual match to the white of the paper and monitor black so it corresponds to the density of the ink max for the paper.

• WebCenter Sites REST API: How to set the active model?

  How can I set the model for the asset, I create.

  AssetBean sourceAsset = new AssetBean();

  sourceAsset.setName (value);

  sourceAsset.setName (prod_name);

  sourceAsset.setCreatedby (value);

  sourceAsset.setStatus (value);

  sourceAsset.setSubtype (value);

  ...

  but no set model?

  Hello

  The model on an asset is defined as an attribute:

  List attributes = sourceAsset.getAttributes()
  for(Attribute attribute: attributes) {
      if(attribute.getName().equals("template")) {
          attribute.getData().setStringValue("ArticleLayout2");
      }
  }
  

  or if you create a new item of assets:

  List attributes = sourceAsset.getAttributes()
  Attribute templateAttribute = new Attribute();
  templateAttribute.setName("template");
  templateAttribute.setData(new Data());
  templateAttribute.getData().setStringValue("ArticleLayout2");
  attributes.add(a);
  

  Kind regards

  Stephan.

• Capture the active user profile

  We are doing a forensic work and I need to find a way to capture the profile of an active user on a Win7 machine. Is this possible using native tools in Windows?

  zs450

  This is beyond the scope of this site.  I suggest that repost you on Technet

  http://social.technet.Microsoft.com/forums/en-us/home

• How to remove auto set the profile of the vcloud Director of storage

  Hello

  I would like to delete the free storage set the vcloud Director profile. But have no corresponding button, anyone has idea?

  I already removed "self storage defined profile" and "storage cap" vcenter.

  Thank you

  Simon

  Oh ~ ~
  Sorry about that, found that it remove the provider vDC.

  Thank you

• Programmatically change the Active Configuration results

  I use TestStand 2012 SP1.  I would like to be able to configure the Active Configuration to get results in the process template.  A station in market our sequential model would set sequential reports configuration as the current record while a station running that a batch model would fix the lot of the report as the configuration active.  In addition, if a station can be both, running the application can select the appropriate process template and he would then choose the appropriate reporting configuration.

  I have installation of configurations but need to know how to set the active configuration.  I don't want on a base by sequence, but rather at the level of the process template so that it is executed once and done.  This would allow developers to change their configuration, but still have the lot or creating sequential reports selected according to whether they are working on.

  Thank you.

  There are a few options here:

  1. Replace the ModelOptions plugin and change the setting for ModelPluginConfigurationToLoad to the appropriate configuration.
  
  
  2. Hardcode it in the callback in ModelSupport.seq.  This way if you've always wanted by automatic override features and call their own as they could.
  
  
  3. Hard-code this entry point for execution of Initialize just before the ModelOptions callback is called in ModelSupport.seq.  In this way the customer can always substitute and change it if they want.

  If it were me, I'd go with option 3 for your case.  You can use Parameters.ModelData.ModelType to determine which model they are running with.  Then, simply put Locals.ModelPluginConfigurationToLoad on the proper setup.

  Hope this helps,

• Dynamically set the Station process model

  I noticed in an existing position, to dynamically set the active process template, you use the Engine.StationOptions.StationModelSequenceFilePath property. (Search for "How do I dynamically (at runtime) the models?").

  But where do you put the statement that sets it?

  Thank you

  Oh yes I forgot to say in my last post

  You can make a file of sequence requires a specific process template.  So that no matter what the model of the station is on the sequence of file always use the designated model provide you.

  With the sequence file that requires that the new process model open go to Edition > properties file in sequence.  Under the Advanced tab, under model Options, select require a specific model.  You will then see a box of template file.  Navigate to your new template and select it.  Click OK to exit.

  Now, whenever this sequence file is opened, it will use this process template regardless of what is the model of the station.

  Hope this helps,

• How can I "activation follows mouse", but with a deadline on the activation?

  I am using Windows 7 now. I learned how to change the registry for that activation of follow the mouse pointer, but it is extremely frustrating when I can't not right-click on an icon in the taskbar to bring up breakfast menu on click on a recently opened or pinned without the menu item will disappear so fast since I spend my pointer in the bar of menu. I need to set a short time, so I can move the mouse pointer on the menu without it disappears so fast on me.

  I really miss the TweakUI for Windows XP utility which allowed me to have not only the activation follow the mouse but I was able to set the activation delay. Whether of 100ms, 500ms, or whatever, I could put it on myself. And by the way, I'm not trying to do the thing "lautoraise", there is no need to discuss.

  Since nothing is more a TweakUI (for Windows 7) that offers this option, I guess the only way to do it is to change the registry somehow to create a delay, but I won't do a thing for her I have not an expert tell me exactly to do.

  It would be good if there was a utility (such as TweakUI for XP) who would do this, but I have yet to find a. If anyone knows that precisely one can create a delay in activation, let me know on this subject.

  But if no utility does exist, and assuming a registry change is possible, how do I create a delay in activation?

  And if it's not too much to ask, could you please tell me how to create a registry file for each of the various delays .reg I would like, as the need at the time. For example, sometimes I have a delay of 100 ms and other times, I would like a longer delay of 500ms. It would be a huge timesaver if I could simply create a file .reg-Double-click on instead of going into the registry each time.

  Thank you

  Lee

  OK, it's tomorrow!

  As I said, right click on HKEY_CURRENT_USER\Control Panel\Desktop and export, name the file, for example: ActiveWndTrackTimeoutDefault.reg

  Then, right-click on the file that you have created and select "open with / Notepad". "."

  Then use the Notepad remove all subkeys under ' ActiveWndTrackTimeout and change the value of the dword to 100ms timeout. "

  Now save files like for example: ActiveWndTrackTimeout100.reg (I'm assuming that 100 = 100ms)

  If you then open the ActiveWndTrackTimeout100.reg file using Notepad it should read as follows:

  (3 lines of text)

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Control Panel\Desktop]

  "ActiveWndTrackTimeout" = dword:00000100

  If the above, this is what you see, then to change the registry current value to 100ms double-click the file: ActiveWndTrackTimeout100.reg

  Note: All other Panel of the registry entries will remain unchanged.

  J W Stuart: http://www.pagestart.com

• JS CS4: Create the variable for the active layer, and then select the layer at the end of a script

  I'm come white with the verbiage and spin my wheels with OMV guide and script.

  var myOriginalLayer = app.activeDocument.layers.item (0);
  Alert (myOriginalLayer)

  Returns "layer object" and not the name of the layer.

  var myOriginalLayer = app.activeDocument.layers.lastItem () .name;

  Returns the name of the layer I want but not by choice.

  I am challenged on how to select the layer.

  Hi John,.

  The difference lies in that the [Object Layer] is the real object, and the 'name' is a property - like color.

  You can use one of these two approaches:

  var myOriginalLayer = app.activeDocument.layers.item (0);
  Alert (myOriginalLayer.Name);

  hosts the original layer object, and you can see the name if necessary :-)

  For re - select the layer, use

  app.activeDocument.activeLayer = myOriginalLayer;

  You can also select name goes like

  var myOriginalLayerNAME = app.activeDocument.layers.lastItem () .name;

  ...

  app.activeDocument.activeLayer = app.activeDocument.layers.item (myOriginalLayerNAME);

  I also noted the following:

  app.activeDocument.layers.item (0) points to the first layer of your document; not the 'active'. Similarly, app.activeDocument.layers.lastItem () points only to the very last. I don't know if the order of the activeDocument.layers array mimicks the order as shown in the tags palette, but I hope for it :-)

  To get/set the active layer, use app.activeDocument.activeLayer as shown above.

• Profile Manager - failed to install the remote access profile in the domain environment & multi-Active Network Directory

  Hi all

  I am a COMPUTER administrator for a college and I am trying to fix what seems to be the last hurdle in getting the Profile Manager works correctly.

  I worked for a while now trying to get the Profile Manager capable of pushing the device and profiles for Mac in our group network environment. I was able to operate intermittently, but not often. Most of the time I'm unable to install the remote management profile.

  When you try to install the remote management profile, I give myself one of the two errors-

  The first error is:

  The Installation of the profile failed.

  The «TeleManagement (com.apple.config. » profile (Server.FQDN.mdm:GUID) "could not be installed because of an unexpected error < MDMResponseStatus:500 >

  (Obviously server.fqdn and GUID are placeholders for their actual values)

  

  The second mistake is:

  The Installation of the profile failed.

  Failed to contact the Protocol SCEP server to ""http://server.fqdn: 1640/CEP / "."

  

  The server Mac OS X 10.11.4 works

  OS X Server is version 5.1

  Client Mac is for most running 10.10.4

  Here's a quick run down on the environment and the steps I have already taken to solve the problem.

  • The network is an Active Directory with several networks multi-domain environment. I mainly work with two different networks, each associated with one of the two areas.
  • The Mac server hosting the Profile Manager is a Mac Pro. The two network cards is used, each on one of the two networks. The Mac server is joined to the domain in the primary forest.
  • I opened all the ports and IP ranges for Apple's Push Notification service for two on our firewall and tested networks between the two networks to ensure that the AFN is accessible.
  • I created a static DNS entry for the server in the DNS zone for the main domain. I also have a separate DNS zone for the DNS record for the interface on the secondary network. I also confirmed that Macs see the correct IP address of the Mac server for their network.
  • I tried to change the settings for network access for the Profile Manager. The first error seems to happen when the Profile Manager are restricted to the network the Mac client is not connected. This same error also occurs if I open Manager profile access to "all networks".
  • I have experiemented with the different certificate types. In general, I use the self-signed certificates that are generated automatically. In this scenario, I install the profile Trust first (which works seamlessly regardless of network or domain). I also tried to use a certificate for Code signing signed with our own CA to sign the profile of remote management. The same errors will occur no matter what certificates are used.
  • The second error occurs when the access profile manager is limited to the same network that is connected to the Mac client
  • I ran Wireshark captures on several client computers, as well as on the Mac server interfaces and haven't seen any traffic blocked or rejected that seemed related to the Profile Manager
  • I've deleted and rebuilt my OD master
  • I also scoured newspapers for clues Profile Manager and haven't found much
  • In addition, I have also studied the problem and error codes/etc widely and have not found a lot of useful information
  • I don't know there are any other troubleshooting steps I took as well, but I've been question bout this for awhile and I don't remember everyone.

  That's a strange thing - I had it working for Mac on the main network and the domain. However, I discovered that the Mac on the secondary network and the field was unable to download the profile of remote management. This is when I started to change the Profile Manager, access network, which eventually introduce the problem on Macs connected to the primary/field of experimentation network. Change access return settings in Profile Manager does not restore functionality for pimps who worked.

  Another thing odd in this test scenario all - Mac on the network high school/area would not install remote profile unless management I temporarily moved it to the main network (I do not untie / reassign to one the main domain on these Macs) I could get the profile of remote management to install and then pushing profiles has worked. Even more strange, it's the Mac that I had to move temporarily secondary network to the main network to allow remote management profile install only works always as long as the Profile Manager are restricted to the secondary network and 'the Mac'. However, Macs in the same room, on the same network in the same field, using the exact image even get the errors described above.

  The only thing I have not yet done is delete/reconstruction Profile Manager. I would really like to avoid this if possible. Solutions that involve something like Casper or other software integration AD for Macs are also a non-starter.

  I'm happy to elaborate if necessary. I appreciate the help.

  Okay, I think I can find the root cause.

  Before this discovery, I had completely rebuilt Profile Manager. Now, I managed by pushing the management profile remote for Mac in the two fields/networks. However, many of them still refuse to install remote management profile.

  Macs who encounter the problem are all were imaged using NetRestore using an image captured from an another similar iMac. IMac even that was used to build the image has now been reassigned in a test of Mac. I found that when you attempt to register one of the Mac who had received this image it shows already as "registered" when you go to "mydevices" on my Mac server. I also noticed that they all have the serial number of the test Mac when viewing their "register". Among the issues of Macs, I activated the lock of the device from the page "mydevices" for the so-called problematic Mac registered (showing the serial number of the iMac used to create the image) and it locked the iMac used to create the image - not the Mac issue.

  This tells me that the CID (or Mac equivalent) is set on the Mac CID used to create the image for all of the Mac said image was deployed to. If it's a Windows box I have a sysprep prior to deployment or could perform a rearm after the fact. I am unaware of how to perform similar functions in OS X.

  I tested also since on some Macs that do not have this image, and they are able to register and install the profile of Managing remotely with success.

  If anyone has any suggestions on how to reset the CID (the computer ID) under OS X, I'd appreciate it. Thank you.

• How to set up email notification alerts in the console BTM

  Hello
  
  I want to know can we send notification of Oracle Business Transaction Management? If Yes, how can I send notification to the administrator say admin @ < host_name > BTM .com on all alerts (alert of ALS or condition) I configured email server host name and the address of the sender in the console BTM but how can I set up email notification on alerts from the console BTM?
  
  Thanks in advance!

  Here you asked for him... it's... (Someday I'll make you open a SR!)

  This aspect of the product is not documented. The important thing to note is the following:

  There are two main sections of the documentation:

  Metadata for SLA alerts
  The following table specifies the metadata for the SLA alerts.

  And:
  Metadata for Condition Alerts
  The following table specifies the metadata for condition alerts.

  If you want to subscribe to an alert of SLA, then you use the elements that are described in the "Metadata for SLA alerts" section. This means that you must use:
  
  ASLM
  in
  

  And you can't use correlationName because who only appears in the alert status section.

  So, what do you use? You must add this item to your subscription:
  
  com.amberpoint.notification.policyId
  UUID:040E7CF8-ED6A-11E1-81EB-6B8C9091B5EE
  in
  

  You must fill in the element with the ID of the policy of your SLA. To find the ID of your look of the SLA policy to the profile of your SLA tab. Use the value that appears in the field 'ID '.

  A full subscription will look something like this:

  
  <>
  enabled = "true" name = "SLA_on_Xact".
  userID = "admin".
  xmlns:AP = "http://namespace.amberpoint.com/amf".
  xmlns:SOAP = "http://schemas.xmlsoap.org/soap/envelope/".
  xmlns:TNS = "urn:com. AmberPoint.notifier.Server.Configuration ".
  container = "http://www.w3.org/1999/XMLSchema" xmlns: xsi = "http://www.w3.org/1999/XMLSchema-instance" >

  
  
  [email protected]
  [email protected]
  
  

  
  
  ASLM
  in
  
  
  
  WARNING
  FAILURE
  in
  
  
  com.amberpoint.notification.policyId
  UUID:040E7CF8-ED6A-11E1-81EB-6B8C9091B5EE
  in
  

  
  
  

  I hope this helps.

  Ken

• How to set the priority in email Notification

  Hello
  
  How you set a priority in email Notification
  
  Thanks in advance.

  Hi ANVV,

  This is possible. There is a varNotificationReq variable that is created with the e-mail activity. In this variable, there is an element emailheader. Set the headername as 'Importance' and headervalue as 'high '.

  Thank you

• How to set the correct active calorie goal

  How can I calculate correct Active calories?

  Hello

  To change the daily goal of moving (active calories) (this can be done at any time):

  • Open the application of activity on your watch:
    • Tap on the complication of business cycles.
    • Or go the home screen (via a simple press on the digital Crown) and tap the app of the activity (coloured rings).
  • Of any where in the application of the activity, firmly press the screen > type on goal to move the change > choose a new goal by adjusting the target it.

  Every Monday, Apple Watch provides a weekly summary of your achievements in moving. Basically, this may include a change suggested in your objective of moving. Scroll to the bottom of the notification to accept or change any proposal to amend or change the goal for the week next to any other preferred level. If the summary is not immediately seen at the reception, you can open it later the Notification Center (which is accessible by sliding down on the screen during the time display).

  To check that you have decided to receive the weekly summary:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > activity > scroll to weekly summary - make sure it is turned on.

  More information:

  Use the activity on your Apple Watch - Apple Support

• I can set the number of events in the calendar to display in the Page Notifications?

  I have many calendar events every day (15-25), but only the following event appears in my display of notifications.   Is it possible for me to set the number I see?  As perhaps the next 3 or 5?  And then they are updated as events will expire?  iPhone 6 s

  No, it isn't. There are other calendar applications, for example schedule 5 of Readdle, that display more complete information, but it does not include the events 'expired' or has a Setup for the number of events displayed in the Notifications. I don't know either, but you can always check the App store. But to be honest, I doubt you will find one that handles what you are looking for in the notifications. The sight of Notifications is not really designed for the complete management of the content of the app.

• How can I keep the active profile so that it will not be closed by the user profile service and crash my application?

  I'm a 1530 entry in the event log of user profile for a custom .net application service that is managed by a scheduled task (non-interactive) followed an appcrash for my request entry. The application performs a treatment and if it is impossible to delete some files because of the activity of the user will sleep for a few minutes before trying again. It is usually during this period of sleep that I have noticed this issue. It's on a Windows Server 2008 R2 computer.

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this information is useful.