Set up 3 monitors - does not work - Help set me up
My computer supports 3 monitors
Video 1 DVI connectors. 1 HDMI; 1 VGA port via dongle
DVI connections seem to work but not the DHMI. The Center displays the typical stuff, the left monitor displays only picture I use on the distop and NOTHING good.
My computer I down load will not allow the disc that came with my LG 2442TC monitors. When I get to the window for the LG monitor I said to select the graphics card on which you want to install the monitor, it says AMD Radeon HD 6850:Generic PnP Monitor 3 times. One is selected and I click on LG E2442 (HDMI) and it says abandoned facility, I've tried others 2 other choices also AMD Radeon HD 6850:Generic PnP Monitor and the other and he did the same thing.
I go to control panel, display, screen resolution, it shows all 3 monitors, 2 are large and a small. I click on the little monitor (1) and multiple views said disconnect this display, I choose "extend destop to this view" and apply and it says: cannot save the settings.
The other two (2 & 3) extend the desktop to this display.
I want to use all 3 monitors as an extended display, how can I connect? or what I am doing wrong?
Desktop HP Pavilion HPE h8-1050
Windows 7
Here are the specifications of your desktop HP Pavilion HPE h8-1050. According to specifications, your computer has an AMD Radeon HD 6850 graphics adapter installed in PCIe x 16 slot. By specifications;
Maximum resolution:
An analog VGA resolution: 2048x1536x32bpp @ 60 Hz (Beige Port via adapter)
Resolution DVI: 2560x1600x32bpp @ 60 Hz (Beige, Dual Link Port); 1920x1200x32bpp @ 60 Hz (black Port, Single Link)
HDMI resolution: 1920 x 1080 (1080 p)
CDM resolution: 2560 x 1600 @ 60 Hz
1 GB on-board memory
Support up to 4 screens
Must use 1 CDM with the other two connectors 3 displays and the two AMD with any other 2 connectors for 4 screens
1 - 2 x AMD
2 HDMI
3 - 2 x DVI (port Beige can support VGA via adapter)
To use 3 monitors would require the purchase and the use of a mini-DisplayPort-HDMI adapter or cable, or a mini-DisplayPort-to-DVI adapter or cable.
Tags: HP Desktops
Similar Questions
-
Primary monitor does not work after last nights updated
- I'm running Ultimate.
- I have two monitors.
- My primary monitor does not work.
- I checked the VGA cables. This isn't the issue.
- Edit: Just realized that my main monitor is a monitor "Westinghouse". -Who is a "Plug-in-and-play" monitor, there are no drivers.
- Reinstalled the ATI drivers, did nothing.
- SYSTEM RESTORED, still nothing.
I ran the most recent update for final last night, then fell asleep. Everything worked before that date, but when I went to turn on my computer this morning, only my HP [my second monitor.] w17e worked. He said he was installing updates from last night, so I had no problem with him and thought it might show something once like this on the login screen.
Once that has happened to the login screen, it showed it for a fraction of a second before disappearing. I entered my password and it connected as usual. After login, I turned off my monitor, and then back on, and it showed my normal desktop for a moment, [enough for me to close two-three programs] before she returned empty.
Hello
I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. in Device Manager, locate the graphics card and then double-click the device name.
3. click Driver tab, then click on set to update driver and follow the instructions.Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
I also suggest that you please check how to set up two monitors and frequently asked questions on how to set up multiple monitors in Windows 7 from Microsoft mentioned below, items
· Setting up dual monitor is easy in Windows 7 http://support.microsoft.com/kb/976064
· Multiple monitors: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions
Thank you, and in what concerns:
I. Suuresh Kumar-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Powers of laptop on but the screen (monitor) does not work.
I have a HP compaq laptop 6720 (vista home basic, 1 GB of ram, intelcore,...)
Powers of laptop on and all lights are working, but monitor does not work.
Nothing on the screen, looks like no electricity on the screen or any contact of motherboard.
Need your help,Kind regards.
Hello
If you don't see anything on the screen when you start, and this includes see the HP Logo, it would seem that it's a hardware problem.
Contact HP Service or a good repair shop.
See you soon.
-
Reliability Monitor does not work in Win7 Ultimate
Can someone shed light on why the reliability monitor does not work in Windows 7 Ultimate? Apparently, it has not operated since I installed the operating system on a dual boot w/Vista system as nothing recorded, nor any indication that current operations record is!
I don't remember having a problem with the tools of Perf and Rel in Vista and performance monitor seems to work in Win7?
I already read the thread on this issue which was published in January 2009.
Any suggestions welcome!
Thank youHi dw_witless,
Thanks for posting on Microsoft Answers!
I suspect that data collection is not enabled. To follow the steps below to enable it:
1 activate the data collection for reliability monitor
Reliability Monitor uses data provided by the RACAgent scheduled task. Reliability Monitor will begin showing an indication of stability, and event information specific 24 hours after installation of the system.
The RACAgent scheduled task runs by default once the operating system is installed. If it is disabled, it must be enabled manually in the software component for Microsoft Management Console (MMC) snap-in Task Scheduler.
Membership in the local Administrators group or equivalent is the minimum required to complete this procedure.
To enable the RACAgent scheduled task
1. Click Start, click in the search box, type taskschd.msc, and then press ENTER.
2. in the navigation pane, expand Task Scheduler Library, expand Microsoft, expand Windows, and click RAC.
3 right-click RAC, click view, and click Show hidden tasks.
4. click on RACAgent in the results pane.
noteNote
The RACAgent task name is maybe not completely visible. If you don't find it, expand the name column in the results pane.
5. in the Action menu, click Activate.If the steps above does not
2 reset the reliability monitor:
1. turn off your Windows 7 problem report history.
NOTE: You need to do step 6 at this link above to delete all the problems.
2. If the Reliablity monitor is open, close it.
3. open the Folder Options and select (dot) the hidden files and folders option, and click OK.
4. open Windows Explorer and navigate to C:\ProgramData\Microsoft\RAC.
5. to save the history of reliability data-
WARNING: This is an optional step, you will not be able to restore these data if you do not back up this data and it will be gone for good. If you want to ignore this, go to step 6 instead.
(A) copy the PublishedData and the StateData files and paste them to another backup location.
6 open the folder PublishedData.
7. Select all files in the folder and click on delete.
8. click on Yes to approve it.
9 open the StateData.
10. Select all files in the folder and click on Delete
11. click on Yes to approve it.
12. If prompted by UAC, then you will need to click Yes to each UAC prompt for each file in the folder StateData approve deleting each file one by one.
13. close Windows Explorer.
14 emptying the trash.
15 open the Options folder and select (dot) the do not show hidden files and folders option and then click OK.
16 open the Reliablity monitor to see it reset now own.
NOTE: If Reliablity monitor is already open, close and reopen.For additional help, you can also check out the article below which explains more on reliability monitor:
http://TechNet.Microsoft.com/en-us/library/dd744567%28WS.10%29.aspxIt will be useful.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Monitor does not work after installing Windows 7.
I have a Dell laptop with a Dell S1709W Flat Panel screen. After replacing the Windows Vista came with the laptop for Windows 7, the monitor does not work. The monitor said that he does not any signal from the computer. The computer does not show that it has detected the monitor. The monitor's cable and the connections are good. What should I do to get the monitor to work?
You have a graphic external connector for a secondary monitor, if yes attach it and then go to the Dell support web site and download Windows 7 drivers for your laptop model. Install the driver chipset first, then the driver graphics/video, network/LAN and drivers of the potential.
If you do not have an external graphics connector, call Dell Tech support. They have a method to recover your system without losing data or applications.
http://www.PAGESTART.com
Never be afraid to ask. This forum has some of the best people in the world to help. -
Monitor does not work after windows update failed
After the recent updates on my computer Vista installation seemed stuck to update 2. I pressed the off button and he turned his back and now my monitor does not display anything, he spends just the analog to the digital looking for a signal. I tried the computer to another monitor with different tracks and it's the same thing. Can anyone help?
Starting in recovery system (from the Vista DVD) options and do a startup repair.
Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly.
Startup Repair is a recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc.
Reference: http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions
If the startup repair does not resolve the problem, try other system recovery options:
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7 Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.
-
DMA2200 on PC-monitor does not work?
Hello
Well I have except the fact that the DMA2200 support not the VOB files, that the dvd drive is not region free and I had to reverse the mistakes of codes avi using the FourCC change codec, I'm surprised that I'm not able to see anything on a standard PC monitor.
At first, I plugged the Componet video output (Y, Pb, Pr) of my DMA2200 directly on the vga input of the monitor (Dell 1900FP) with a cable special nine, but I saw just nothing more than a black screen. I changed the monitor for a LG Flatron L222WS monitor told me that the frequency was out of reach... Certain signals does not cross?
But as the DMA2200 has a HDMI output that welland the Dell1900FP supports DVI - D Dual Link entry too, I. The 1900FP has a resolution of 1280 x 1024 and it can be run up to 75 Hz, 60 Hz it's native refresh rate. So, I went back to the store and bought a HDMI<->DIV - D Single Link cable.
Only one? Yes, why not!
DVI dual link as its name suggests has drivers more than the single link DVI for signal transmission. Single link DVI supports a maximum bandwidth of 165 MHz (1920 x 1080 at 60 Hz, 1280 x 1024 at 85 Hz) and use 12 of the 24 pins available. Dual link DVI uses all 24 pins available and supports a maximum bandwidth 2 x 165 MHz (2048 x 1536 at 60 Hz, 1920 x 1080 at 85 Hz).
So, I plugged the HDMI<->DVI - D on the DMA2200, the Dell1900FP monitor and the monitor directly on channel 2: digital input. But... a black screen again. As I left the monitor rescanning the entrance, he tells me "Please press any key of the mouse button. It seems that the monitor sees a digital signal, but expected more... hmm... what to do?
I tried to use NTSC (instead of our PAL) on the DMA2200 menu as the frequency changes, but it does not work. I also used all of the selections of entry on the DMA2200-menu (like composite-sd and hd). Normally, the HDMI options is grayed out and uses the default Auto option; but in composite-hd, my old TV mode (connected by SCART) turns black, but can still use the menu on the screen before the DMA and am able to change the HDMI settings, like 480 720 (if I remember correctly) and 1080 p (progressive format) and 1080i (interlaced). I hoped a solution here, but maybe it's just not my day.
Then.
Y at - there anyone out there that can help me to get a picture on the monitor? Whether vga or dvi - d... Please...
Your Dell LCD and DMA2200 not being able to understand/sync between them with a direct DVI connection you could try to put a device inbetween them so that your Setup program can work. Try this device, basically, you connect the DMA2200 using RCA cables to the KWorld device and this KWorld device is then connected to your Dell LCD screen.
See you soon.
->-> -
MyCD Rom does not work help!
In Device Manager it sayes windows cannot load device for theis hardware drivers. The driver may be corrupted or missing. (code39) I uninstalled and unplugged the computer and when I plugged it back in and turned on it says please consult the manufacturer of your device to help get this device installed I have no ideal what I do to help someone! I did everything I know!
Hello
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Monitor does not work after restoring update
Hello. I have a problem with my PC. My CPU is on but the monitor shows No Signal box. Previously, this problem seems too. But I fixed that by cleaning the RAM access (or other) Point. But this time, this method did not work. I have clear the CMOS, but the problem still not fixed. Oh yes, this problem occurs after the update. When updating, the update has failed and come back. When I start the PC again, nothing is displayed and there is no sound signal. Help me please. My characteristics are processor i3 Intel, ATI Radeon HD 5550 2 GB, DDR3 RAM 2 x 2, Windows 8 Pro 64 Bit.
Hi Chloe,.
Thank you for the update.
I understand that since the DVD burner does not work, you are not able to create installation media.
Put a USB installation media option. You can use both links to download and create below
Update Windows with only a product key
http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only
Here are the steps:
1. download and open the Setup file install Windows 8 Microsoft from the link above.
2. Enter your product key of Windows 8 and start the download.
3. once the download is complete, select install by creating media.
4. Select the USB flash drive (it should be the default choice) and insert the USB key.
5. accept all prompts to clear the contents of the USB key in order to start the process.Let us know if that helps. Keep us informed so that we can help you further if necessary.
-
HP pavilion dv9925nr sound does not work help please
Hi I have a hp pavilion dv9925nr laptop and I spent in Windows XP pro and now the sound does not work and iv tried everything iv downloaded all the drivers on the internet and everyone simply goes on to say: no driver no has been supported in this package and its driving me crazy please can someone help before I just use it to target paratactic
Hello:
Then I recommend that you follow the instructions in the guide to the link I posted above.
After you install the MS UAA driver, you may need to install the audio driver updated the posted on this link:
Conexant High Definition SmartAudio 221 drivers (ModelC700, Vx5xx series and dvx5xx and ABOVE )
Pilot modded by silver here
Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
Not to connect, install from a list or specific location,
Select don't search, I will choose the driver to install.
For the hardware Type select 'show all devices '.
Remove control "Show compatible hardware" and click on 'disk '.
Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
Ignore XP when he complains, Reboot.If none of this works, try to reinstall XP and start from scratch. If you do not see your appliance an audio controller if you reinstall XP, then more than likely it is a hardware failure of the audio chip.
Paul
-
My application get Windows 10 does not work HELP Please
1 - my get app Windows 10 does not work. Whenever I try to run your PC compatibility check it says:
The report is not available now, you can always book your upgrade when it's time to start the upgrade we will run another report to make sure that your PC works with Windows 10
2. when I click on view Confirmation it Says:
YOUR UPGRADE IS RESERVED
There is nothing you need to do now, you will receive a notification on your PC when windows 10 is ready to install.
and it been like this for 4 weeks and nothing happened what should I do to check if the applications on windows 7 runs on windows 10 or not and start the upgrade to windows 10
Please help thanks
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
How to create an ISO or USB drive.
Select upgrade this PC now and then click Next
or
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: determine if a device application or hardware is compatible with Windows 10
- Will remain the documents and applications, or install app must
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
I downloaded vista of a school site web does not work help
I used a MSDNAA web site / product: Windows Vista Business DVD e - bigship.com / / is not working help
Contact the school where you have Vista of for all the problems.
See you soon. Mick Murphy - Microsoft partner
-
PRINTER DOES NOT WORK HELP!
I just upgraded to windows 7 and my HP712c does not work anyone know why? It worked fine with VISTA!
Because Win 7 does not support this printer. Time for a new printer, I'm sorry.
-
External monitor does not work with Tecra M Series
Hello
I'm trying to connect to an external monitor, however it is not working properly. The monitor works fine with another laptop so I know that the monitor is ok.
When I first start the lptop I get the screen then I XP Flash on the external monitor perfectly clearly, however when it will boot Windows XP the external monitor goes haywire.
Advice/suggestions would be appreciated.
Either way, I just updgraded all display drivers and BIOS but with no solution to the problem.
Thank you very much in advance for all help/tips.
King Tony
Hi mate,
my suggestion is to reduce the resolution for the external montor. Maybe you have the problem that the resolution and frequency h/v is not defined as it should be.
When starting your laptop, then let the disconnected monitor. When the machine is running, then connect the monitor to the machine (it s OK, it s not dangerous or something) and then go into the control panel for the graphics card. There you can set the options for internal and external monitor.
Set the minimum resolution for the outside and try to activate him. It should work normally...
Please tell me, what kind of machine do you have? You need to give more information, so maybe other people with the same machine can help you.
Welcome them
-
Satellite L50 - A - 14 M - Toshiba pc health monitor does not work
Hello!
I am new to this forum and I have a problem with my new toshiba satellite l50a - 14 m. I did a factory reset recently and the integrity monitor (whitch is an excellent program in my opinion) no longer works...
When I opened it notify an error "Could not get the flag to enable sorts in the registry" and does not turn on.
I have 8.1 64-bit windows;I tried to download versions more but do not work.
How to do?Sorry for my bad English...
TSRI means the Intel Rapid Storage Technology, and there is also a TSRI driver available on the Toshiba UE driver page.
You need to update or reinstall the driver.
I think this will fix the problem of pc health monitor
Maybe you are looking for
-
What real difference I notice between 1.4 ghz and 2.6 ghz models? I am not a number cruncher or graphic designer. A lot of pictures. $200 is a lot for an unnecessary speed. What do you think?
-
Tecra M5-400 after uprade to Visa - icons, text are not correctly displayed
Dear users, Just upgraded my Tecra M5-400 in Visa Ulimate. The problem now is that the icons, text, etc. are not displayed correctly (big, dull). Tried drivers from Toshiba, but none of them is specific for my model, and some of them do not install.
-
How can I connect to a computer witch works on win 3.1.1 from a xp computer. 3.1.1 victory has only Board of LAN and a Perrine. No update is possible at the victory of 3.1.1
-
Queues not taken offline support OS6 - why?
I had planned on the use of queuing offline, but discovered that it is no longer supported in OS6. Does anyone know if offline queues will build again?
-
.Mdb MS Access using ODBC connection failed to resolve ORA-12154 connection identifier
Dear all,I am using the MS Access file .mdb as the source of my request for OWB. I need to connect to the ms access .mdb file first using odbc. This is the step that I do:1. define the ODBC connectifityControl Panel-> admin tools-> data-> system-> ad