Set up administrator features.

I am trying to activate a feature with my administrator profile, I use it mainly security for nothing to install behind the operations. But Im getting bombarded when I boot with windows to login to the admin profile allow some programs, now I am able to install a timer for the profile that I can log on once and allow programs through and have it automatically logout? Or should I continue to do this registration system whenever a program will run / must be allowed. Granted, I want to log on once and timer is about 5 minutes and then set it and forget it basically. But I am unable to find a way to adjust or even configure declares that the Variant. I know that Linux works this way for security if Im hoping I can do the same with my windows profiles

This is so the specialist that I think you need to know what advice you can get on the motherboard support website. They cannot seriously wait an Admin to manage each startup. You may have defined their utilities to load every time although the motherboard manufacturer intended whether utilities are just run when troubleshooting.

Tags: Windows

Similar Questions

Is a cursor variable determined by the result set persistence pause feature?

My world of PL/SQL is upside down: I'm expecting cursor set persistence any operation of inner loop can affect the result. This does not work as expected with an aggregation as subquery (see sal_dept), but adds little by little upward in determining the value of the slider by a function (see sel_debt_funct). What is the reason for this behavior? Bug feature?

Facts: Oracle 10.2.0.4

CREATE OR REPLACE FUNCTION get_sal_dept(
    pdeptno IN emp.deptno%TYPE
)
    RETURN emp.sal%TYPE
IS
    lnreturn  emp.sal%TYPE;
BEGIN
    SELECT SUM(sal)
    INTO   lnreturn
    FROM   emp
    WHERE  deptno = pdeptno;

    RETURN lnreturn;
END get_sal_dept;
/

BEGIN
    FOR r_emp IN (SELECT empno
                        ,ename
                        ,sal
                        ,emp.deptno
                        ,sal_dept
                        ,get_sal_dept(emp.deptno) sel_debt_funct
                  FROM   emp
                        ,(SELECT   deptno
                                  ,SUM(sal) sal_dept
                          FROM     emp
                          GROUP BY deptno) x
                  WHERE  emp.deptno = x.deptno)
    LOOP
        UPDATE emp
        SET sal = sal * 1.33
        WHERE  empno = r_emp.empno;

        DBMS_OUTPUT.put_line(r_emp.ename
                             || ': '
                             || r_emp.sal
                             || ' Total Deptno: '
                             || r_emp.deptno
                             || ' by inline aggr:'
                             || r_emp.sal_dept
                             || ' by function:'
                             || r_emp.sel_debt_funct
                            );
    END LOOP;

    ROLLBACK;
END;
/

DROP FUNCTION get_sal_dept
/

Result:

CLARK: 2450 Deptno Total: 10 by aggr:8750 inline by function: * 8750 *.
KING: 5000 Deptno Total: 10 by inline function aggr:8750: * 9558.5 *.
MILLER: 1300 Deptno Total: 10 by inline function aggr:8750: * 11208.5 *.
JONES: 2975 Deptno Total: 20 by inline aggr:10875 by function: * 10875 *.
FORD: 3000 Deptno Total: 20 by inline function aggr:10875: * 11856.75 *.
ADAMS: 1100 Deptno Total: 20 by inline function aggr:10875: * 12846.75 *.
...
...

Edited by: user577229 the 07.06.2011 09:27

Published by: BluShadow on June 8, 2011 08:29
addition of {noformat}

{noformat} tags

If I understand your point, the key concept to understand here is related to "* statement-level Read consistency and coherence of reading at the level of transactions."

From the Manual:
+ "If a SELECTION list contains a function, then the database applies consistency of reading to the statement-level to the level of the SQL statement executed in the PL/SQL function, rather than the parent level SQL code. For example, a function can access a table whose data are changed and committed by another user. For each execution of the function, SELECT a snapshot consistent new reading is established. » +

These two concepts are well explained in the "Oracle® Database Concepts":
http://download.Oracle.com/docs/CD/B19306_01/server.102/b14220/consist.htm#sthref1955

What is 8.55 PeopleTools remote administration

In peopleTools 8.55 there are remote administration settings in the psappsrv.cfg PSTOOLS section. What are the features and how to use it?
Values for the config - PSTOOLS section
Enable Remote Administration = 1
Administration port remotely = 10100
Remote Administration UserId = admin
Remote Administration password = *.

PeopleSoft Health Center

________________________

Authentication of a component or a field with a JMX Agents, press Enter to collapse

PeopleSoft Health Center invites you to add components or domains registered with PPM agent for the purposes of surveillance. The monitoring application authenticates these components or areas by asking a Panel on each component or member field. This is a single authentication that is implemented through the JMX agents. You can choose the components or areas to analyze by answering Yes for the option turn on tracing.

Consider the following when you want to enter username and password for a domain or a component participants:
- For the web server component (domain PIA), the JMX agent uses the same user name and the password that you enter in the web server administration console.
- For Tuxedo components (application server and the areas of the process scheduler), the JMX agent uses the user name and password is entered in the field Tuxedo configuration file.
After you have registered a component or a domain, if you disable JMX agents, registered components will display an error message on the dashboard application. The error message indicates that the component is inaccessible for monitoring.

To enable or disable JMX agents for the application server and the areas of the process scheduler, you change the value of the parameter enable the Administration to distance in the PSTOOLS of PSADMIN section. Set the value to 1 to enable the JMX agents; sets the value of 0pour disable JMX agents.

When you set enable Administration 1 remotely, a lightweight daemon rmiregistry process begins on the machine. Several areas on the same machine can share the same rmiregistry process using the same value of parameter of Port of Directors remotely, but these multiple domains must have unique domain names. When the rmiregistry process is started, it is never destroyed until the computer is restarted.

HP Officejet Pro 8630: Set up to scan

Im trying to set up the feature on printer for analysis.

I have an IPad & IPhone and can't understand how I can activate the analysis feature.

I don't have a desktop or laptop computer.

appreciate any guidance

Thank you

Hi @Fangers1,

Thanks for joining the Forums of HP Support with your scanning application.

I understand that you want to scan from your IOS from Apple to a HP Officejet Pro 8630 devices e-all-in-one printer. I would like to help with that.

Scanning software HP is usually provided with the software that you install normally on a desktop computer or laptop, if you had one that is.

HP AiO Printer Remote App is available on the App Store on the iPhone and iPad. The HP all-in - One Remote Printer is a free mobile application that allows you to print and scan wireless using the supported printers compatible HP web that is located on the same local network as your mobile device wireless.

Here is a support document which can serve as a reference when you you install using the application - Mobile printing and scanning with HP AiO Printer Remote App.

Please let me know if that solves the problem, or if you need assistance.

2012 NAS server set full control for the Admin user, but cannot add files

Hi, I'm new on using Server 2012 (or any server operating system). I created a shared folder by using the files and storage, quick profile SMB services. I set the administrator with full access account. I added also a group of users with reading and only execute permissions, the administrator account is not within the group.

I have the drive mapped to my desktop running Windows 7 Home. I use administrator credentials to log on. I try to add files through the mapped drive, but does not have my permission to create or copy files ("you have authorized to perform this action"). I can't that speculate that the problem is caused by the run as account on my desktop do not match those of the server? Any suggestions on fixing this problem?

Note: I created a separate administrator account and a group on the server with a control total and still not able to add or modify files on the network drive,

Hi Sheener,

Thanks for posting in the Microsoft Community.

The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

Run the game as administrator, which causes my software logitech setpoint not responding.

OK, there are a few games that I can play if I run as administrator. I wish I could just run them without any problem. Secondly, when I play my games (run as admin) my setpoint software for my mouse Logitech G5 no longer works and my settings for my mouse do not work as they are supposed to set. I also use Ventrilo voice server to communicate with my friends, which complicates things more. I found the following will work, but it is RIDICULOUS that I have to do this.
1] game as administrator, then out of alt - tab on the desktop.
[2] run ventrilo as administrator, and then alt - tab out to the desktop.
[3] then run set as administrator, and then alt - tab back to the game.
everything works as before in winxp at this stage. but it's crazy that I have to do this if I want to play my games! First of all, I don't understand why I have to run the game as administrator all the time... I am completely convinced my games. Second, point to load at startup of windows7, so when I want to play my game, I have to close the set point and follow the procedure above.

Help!

Yes, it's the right thing to do for Windows 7. Step 2 described by Shinmila H. is for Windows Vista. UAC has changed and the 'use access control user (UAC) to help protect your computer"option no longer exists in 7.

Also, if you want to keep UAC, you may be able to bypass your problem by changing the setpoint utility and Ventrilo administrator automatically mode point.

(1) open the start menu, click all programs, go to the startup folder to locate the shortcut of Logitech Setpoint

(2) right click on the shortcut, click Properties and click the Compatibility tab, then check the box "Run as Administrator".

(3) locate your Ventrilo shortcut or executable and do the same (right click ==> compatibility ==> run as administrator).

(3) restoration UAC return the cursor to the top one or two notches, and then restart the computer and check if everything works

My guess is that any game that you run in administrator mode will refuse the entry of any software that does not have the same privileges. The trick above works for me with the set point, but I'm not sure of Ventrilo (do not use).

Step 2 and 3 above just automatically happen that you perform with ALT-tab on the office.

Otherwise if you don't care about having UAC, just keep this option disabled.

How can I add an administrator if there is no designated as administrator on the PC?

My son deleted my administrator account and changed me for limited use of the user. Now there is no Administor and I can't load any program or to any administrative action. Is it possible to add an administrator account without going through an administrator. ? How can I add an administrator if there is no designated?

Simply log in using the built-in Administrator account (it cannot be deleted) using start > run > 'control userpasswords2' to change the desired accounts.

By design, the only way to connect to the administrator account on Windows XP Home is to restart in Mode without failure. For WinXP Pro, by pressing CTRL + ALT + DELETE twice at the Welcome screen will produce the standard login dialog box. Unless the owner deliberately value password to the administrator via the Management Console (_not_ Control Panel), it is probably still a Virgin. WinXP Pro ask the installer to set the administrator password during installation, but WinXP Home does not work.

Failing, Linux-based password cracking utility abound on the Internet, available for free to anyone who can use Google.

Signature as a Director & administrator password

I have Windows XP, Service Pack 3. While trying to solve some problems with my computer, it asks me to log on as an administrator and enter the administrator password. I don't know how to do this, or if an administrator password was already implemented. Any ideas?

Simply log in using the built-in Administrator account (it cannot be deleted) using start > run > 'control userpasswords2' to change the desired accounts. You are prompted to create a password for this account when you initially installed WinXP.

By design, the only way to connect to the administrator account on Windows XP Home is to restart in Mode without failure. For WinXP Pro, by pressing CTRL + ALT + DELETE twice at the Welcome screen will produce the standard login dialog box. The owner deliberately unless the value password to the administrator via the Management Console (_not_ Control Panel), there
probably still a Virgin. WinXP Pro ask the installer to set the administrator password during installation, but WinXP Home does not work.

Failing, Linux-based password cracking utility abound on the Internet, available for free to anyone who can use Google.

Administrator of the repair disc menu password recovery

My windows has / had a corrupt registry error / System 32. I followed these instructions before and he went to be totally turned off to get stuck at the windows logo screen.

http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/2e49321b-b6c7-414e-a12d-03a97e3548f4

I guess I probably missed something somewhere and I want to try it again, but when I start the recovery process that it requires admin password and I don't know what is more. I did the first part months ago and took a break.

Any help would be great.

Thanks in advance.

If you do ever set an administrator password, just press ENTER when you are prompted to do this. Boulder computer Maven
Most Microsoft Valuable Professional

I'm unable to set up my new Linksys E1000 router to my computer dell Inspiron B130 laptop.

When you try to configure my linksys E1000 new router I get... We can not define your... router wireless connection requires Wi - Fi connection are managed by microsoft windows. some computers have a different wireless connections Manager... I tried to disable my dell 1470 wireless unsuccessfully lan card to get the new router loaded... any suggestions?

Hi Devar,

When you configure a new Wifi router immediately, you can connect to the radio

you have to go on the wireless router and you also need an ethernet cable to connect the router to your pc wirelessly

normally all routers come with an installation cd. But if it does not

Open your web browser and type the ip address of the default gateway

The IP address of the Linksys routers is 192.168.1.1

from there, you can set the security features and everything and after that you have set up passwords and everything please connect your modem to the wireless router so that you can access the internet

to manage your network wirelessly with the windows wireless client, please activate your Automatic Configuration WZC wireless

follow these steps to activate the automatic Wireless Configuration

Start menu - click on RUN

type in SERVICES. Scroll down the list until you see SMC Wireless Auto Configuration

Double-click and should be in service type: automatic

and also, click Start to start the service.

Hope that helps

Administrator account is disabled - system 5 error when trying to access

So I created a user account with administrator rights because I had problems with other accounts of user download of malware and viruses on my computer. Unfortunately, I've changed the password one night when I was very tired and now draws a complete blank on what it might be. Time has passed and I have tried everything I can think enough to know that I'm up a Creek trying to remember this password. After that some searching around, I learned to start safe mode to access the hidden administrator account, which does NOT produce the hidden administrator account. Then I read about access to the cmd as administrator, but that doesn't work either because he asks me the password I don't remember. If I try to run cmd with "net users administrator / Active: Yes", receives a message indicating "system error 5 has occurred, access denied. Same thing if I try to enter "net user *", and then click the password twice to clear it. I know that I have set up with administrator access the user account is different than construction administrator b/c if I go 'lusrmgr.msc' in the search/run box on the start menu, then clicking on 'users' I can see that they are two separate accounts. When I click with the right button on the built in Admin and select Properties, it shows a check in the box "account is disabled". If I uncheck this box, I gives me the error message "access denied." If I try to go the other route and check the "account is disabled" on the user account that I set up with administrator access, I gives me the same error. If I try to delete the setting of administrator group of the user account that I set up with administrator access I'm access denied once again. All this is considered... other ideas or tips? I read somewhere that apparently since I created a user to have admin access, hidden admin is disabled by windows automatically for safety. I really hope this isn't the case! I'm very hesitant to use a tool to reset password to a third party if I have to, but I'm running out of options and it's been months. I appreciate any help, tips, reviews, etc. Thank you!

You cannot administer a computer unless you are an administrator.

The built-in account is disabled if there is another admin account.

There is no way around it, or it would not be safe.

Don't forget the computers are not safe during execution.

MS sites will not discuss hacking password.

Administrator account deleted, how to restore?

I tried to restore my computer to out of State of the box, after that I ran all the disks to do this; the computer frozed upward, I rebooted the computer, but now when I try to log in, it says that the account is deleted. I never had a password to connect since I was the only one to use it. Now, the only way to use my computer is using it in safe mode. I tried to set the administrator password and it did not work, he always says the account is deleted, even tried to log in as guest only and still not working. Is it what I can do, it only happens when I try to start windows normally. As I said that I can't use it in safe mode

Try this:

http://www.ehow.com/how_7233965_restore-deleted-accounts.html

My OS has an identity crisis! My user account has an alias? Who owns my computer? Do I really need an administrator account, but also a Standard?

I'm confused by the different results different utilities to inform me on the question of whether if I use an administrator at some point account. When I got the computer it was pre-installed with Win 7, and the OWNER was called USER, what is an administrator account. First, I changed the username in the CPL accounts user to "Willy". For a week or two, I've experimented with that, and various utilities gave me different results. I think that "Willy" had been grafted onto a shortcut, the pointer or the synonym for 'User '. At one point, Windows Explorer has changed the user to 'Willy' folder, but still I get harassed me to raise my status for the various system calls, unless I used the option to right click "run as Administrator" (I don't know when this option became available in the context menu), to load the Application or 'Take Ownership' option (ditto) , which was confusing and ' it was hard to understand what he did. Then, I created an administrator named 'Administrator' account (perhaps a mistake) and changed "Willy" (or 'User'?) to a standard account. I'm still confused. I have now two directories in the directory C:\User, 'Administrator' and 'Willy '. But I'm now slowed by the login screen. If I choose "Willy", then Manager of tasks/Users told me that 'User' is connected, the shell command line sets the directory as... \Users\User and the back order 'whoami' tells me that I am 'user '.

If anyone can clarify these issues, then I'll be very grateful: -.

1. How can I synchronize my folder with my user name names?

2. How can I make my user account (regardless of his name) have the permissions of the owner of the computer?

3. I just have a user account, which can be high if necessary?

4. where can I get detailed information about what happens when we renames, deletes, or creates a new folder?

5. can I get digital trouble for appropriating files I transferred from my old computer?

6. the built-in Administrator account can be used for limited, system calls instead of create an administrator account called "Administrator"? I'd rather just Butler of my own private PC and can't see the login screen. I know the deletion of an account will solve this problem, but which, 'Administrator' - the account admin, or "User" (aka "Willy"), the standard account?
1. Name of the folder to synchronize with the user name.
  You cannot change the name of the user folder after it is created, because everything depends on it. If you want it to function, create a new account user profile on the computer using the name you want the file to be. Then, delete the one with the name that you don't like.
2. Set the user account must have the permissions as owner
  Set the 'administrator' account type and he will have full control over your computer.
3. Can I have a single user account and raise necessary?
  You can have a standard account you can raise when you need to. But you still need to have an administrator account to use (or otherwise you will never be able to raise or even change the settings again... bad news!)
4. What happens when we rename, remove, or create a new folder?
  There is nothing happening, the step you take is applied immediately on hard drive.
5. Problems with the previous computer file transfer?
No, that's your prerogative. You can do what you want, as long as it's not against your terms of use agreement. If you can not decompile the source code of the operating system for example, is against your license to use Windows.
The built-in Administrator account can be used for system calls restricted, rather than create an account administrator called "Administrator"?
The built-in Administrator account is already called "Administrator", by default, unless you changed it.

If you don't want to see the login screen, just use an automatic connection. I have a video that explains how and it works on all versions of Windows:

Automatically to connect on Windows [Video]

activation of administrator on windows 7 Home premium

I used the transfer utility to transfer my credentials from a business laptop windows to a new laptop with windows home premium on it. When I first came to windows hp I discovered that my account is a standard account instead of a directors - even through the said account administrator type account when I drilled down he has been upgraded and would allow me to change it.

In looking at some of the other threads, I tried a number of things, and that's what I found at work underneath for me.

Signed my account
Went to the Directory Windows/system32 and cmd.exe found
Highlighted file name and right click
Choose run as administrator from the menu
Double clicked on the file
The open command window
Typing in net user administrator / Active: Yes
Closed the command window
Restarted
The administrator now appear on the Welcome screen

I tried the windows and R - key that did not work
When I tried to type lusrmgr.msc I got the message that this was not supported in the home premium

My question is - is this because my transferred account was account an administrator to start? Or was this coincidence I managed it - the Administrators account when activated is not a password on this subject and I guess I should create one - but I'm not sure what will do after the fact for utility and other windows. Anyone?

Thank you

My question is - on the screen - just to confirm - the user is in the Administrators group? I thought when I opened this window it would have the active administrator not the user standard active - so my assumption is that regardless of the user is set to the default screen to 'other' choice?

Thanks again!

If you set the administrator user, it will become a user with the administrator authority
and he or she will be placed in the Administrators group.

The best way to spend it is by pressing Windows + R and type"control userpasswords2".
1. select a user from the list and click Properties.
2 select the group membership tab.
3 select Standard user (or administrator) , and then clickapply and then click OK.
4. click on OK.

Itknowledge24.com

Windows 7 has lost Administrative Priviledges

I tried to install driver for printer Canon on HP all-in-one computer from my mother-in-law Windows 7 64 bit. Installation kept failing then I disabled the anti-virus and firewalls. No change, I went to Control Panel programs and discovered the "tons" of involuntary installed on his computer. As I tried to uninstall, I am received the error that we do not have administrator privileges to uninstall the software. I checked the users and his account is the only one on the computer, and this account is the administrator.

As this point I suspect malware any. I run a full scan by Norton and he comes clean. I'm trying to boot into SafeMode using F8 at startup... computer is sent to the normal startup. Only way I can get into safe mode is through MSCONFIG. Rerun the Norton... no change. I have successfully install MALWAREBYTES and find problems with 1500... Some are cookies, some unintentional software, some registry keys. After cleaning, I go to programs yet and can't seem to uninstall some programs, but even more so to tell me that I don't have administrator privileges.

I still have the ability to restore the disk hard back to factory settings, but which would result in the loss of all its data stored on the hard drive... not my first choice but may be my only option.

She tells me that this computer is very slow for some time. No idea how far backward, it will... computer is around the age of 18 months.

Am open to any suggestions at this point.

THX.

To activate the built-in Administrator account, follow these steps:
1. Click Start and type CMD in the search box.
2. right click on the command prompt, and then click Run as administrator.
3. If you get a prompt (UAC) user account control, then click on continue.
4. in the command prompt, type net user administrator / Active: Yes and then press ENTER.
5 type exit and press ENTER.

With the above command the Admin profile would be activated. Follow the below mentioned steps to disable the password of the admin account.
1. click on start, open Control Panel.
2. open user accounts, select manage on behalf of others.
3. Select the administrator account and click on remove the password.
If you do not get the option to remove the password, then this would indicate that there is no set the administrator account password. You can restart the system and connect to the administrator account to uninstall programs.

Set up administrator features.

Similar Questions

Authentication of a component or a field with a JMX Agents, press Enter to collapse

Maybe you are looking for