Am ok with this installation route win 8 and oops.

Similar Questions

• Installer of Windows Vista. -Error message: "another installation is already in progress. That completes before proceeding with this installation. »

  When I go to open Word or PP files I get a message "another installation is already in progress. That completes before proceeding with this installation. "There is no other facility. I can't install the Vista updates either. I suspect a problem with windows Installer.

  marcus1145944z,

  Please post with the information requested here:what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations ofKB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to install iTunes, I get this error: "there is a problem with this installation package. a program required for this installation could not be executed.

  He said: "there is a problem with this installation package. a program required for this installation could not be completed, contact your provider of batch

  original title: itunes is not installed.

  Hello

  Did you change your computer?

  Method 1:

  I suggest you to see the links and check.

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  See also:

  Solve problems with programs that cannot be installed or uninstalled http://support.microsoft.com/mats/Program_Install_and_Uninstall

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  I also suggest you to contact the Apple support and check.

  http://www.Apple.com/support/

• "You have Adobe Acrobat installed (continuous) DC. Please uninstall this product before proceeding with this installation. »

  Someone had this error when you try to load Adobe Acrobat DC?   I have keep getting error "you have Adobe Acrobat DC (continuous) already installed. Please uninstall this product before proceeding with this installation. " I uninstalled the demo free now I can't install disk. Any help to what is my next step?

  Hello

  It seems that Acrobat has not been installed properly on your machine.

  Could you please the operating system of your system?

  If you are on windows, you can download the cleanup tool to uninstall Acrobat completely.

  Download Adobe Reader and Acrobat cleaning tool - Adobe Labs

  Once uninstalled, you may proceed in the same way you are now.

  Concerning

  Sukrit diallo

• Bought Adobe DC after the trial, after download receive: you have Adobe Acrobat DC (continuous) is already installed.  Please uninstall this product before proceeding with this installation.  Perhaps because the trial was under different Adobe ID?

  Bought Adobe DC after the trial, after download receive: you have Adobe Acrobat DC (continuous) is already installed.  Please uninstall this product before proceeding with this installation.  Perhaps because the trial was under different Adobe ID?

  Sign out of your account 'other '... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account "nine"... Reinstall

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• Problems with the installation of the bridge and the company

  Hello world!
  I have problems with the installation of the bridge and the company. Although I have install both of them successfully, when I try to connect to the gateway through the console I have error message saying there is no company installed. In fact, I get an error as well through the wizard saying "failed to run. Please see details below:
  
  Unable to launch: "C:\DOCUME~1\SIEBEL~1\LOCALS~1\Temp\2\LRE19.tmp\bin\java.exe-Dtemp.dir=C:\DOCUME~1\SIEBEL~1\LOCALS~1\Temp\2\ - cp C:\siebelent\siebsrvr\bin\setup.jar run - args LANG = ENU VISIBILITY = REPEAT BUSINESS = FALSE MODE = MODEL_FILE=C:\siebelent\siebsrvr\admin\siebel_server_sia.scm LIVE" error code: ""(SBL-STJ-00152)-1 "»
  
  Also, when I try ot run the following in the console: C:\siebelent\gtwysrvr\BIN\srvrmgr.exe - u - p SADMIN SADMIN - g siebelwin2k32-e SIEBELENT, I get this error: fatal error (3015667): the program variable 1% is not defined, existing...
  
  
  Thank you in advance for your help!
  
  MARIANA

  Mariana,

  Please confirm if you try to configure the siebel server in the same machine as the gateway server. If so try to use localhost instead of the hostname of the machine setting up Siebel server.

  I assume you are using windows 2003 as the operating system.

  Thank you

  Wilson

• Win7 - 3Com Etherlink XL 10/100 PCI is not compatible with this version of win

  Microsoft was informed by co manuf. updates will not solve the problem!  What can I do?

  Use a compatible NETWORK adapter.

  This site covers Windows 8 and 7. Change to Windows 7 and then look in the section "DEVICES"...

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home

• Problems with my installation of Windows XP and my computer does not start on the CD.

  Hi, I need BIG help here please!... I wanted to do a fresh install of Win XP Pro, but my PC didn't boot from the XP CD... I changed the BIOS settings, the sequence start on CD, restart my PC and he kept boot from the HARD drive and the PC does not recognize that there is a CD-ROM drive. Once the start-up of the PC from the CD, I wanted to delete the partition and format the HARD drive, but it says "Setup could not format the partition...". "something like that... so what I did I have the PC from the boot CD, click in the command line and 'R' for repair, I wrote"format c:"and after that, I wrote" diskpart remove C:' so I deleted the old partition, create a new and when I wanted to install XP on it, I could not because the PC does not start from the CD... how can solve this? "

  Thank you!

  original title: HELP for the installation of Win XP.

  Hi Jorge,.

  So the only thing I can think is that it is a sort of master/slave thing.

  Your IDE HDD will be a Knight, probably alongside where the power cable is inserted, to dictate whether the player will be considered to be a master, slave, or cable select. Assuming that it is the only HARD drive in the PC, make sure it is designated "master". Then, in the BIOS, make sure that the boot order is specified as HDD0 first (as opposed to HDDx where x is greater than zero).

  In addition, assuming that the data cable is the new type of Ribbon with strands of 80, make sure that the blue connector of the IDE data cable is in the motherboard and that the end of the black connector is in the HARD disk and, if it is a two-disc data cable, do not use the gray connector.

  Tricky

• Problems with the installation of windows updates and reboot the computer

  When you try to restart the computer it freezes on "installation updates.do not turn off computer.". Currently have 20 updates which will not be installed. computer says CCC.exe prevents the computer from restarting and getting error code 80240016 when you try to install the updates

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/957307

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, are kindly Error Codes and exactly what happens when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems with the installation of Win 7 on a dual boot Win 8 computer

  I recently bought a new all-in-one computer with an operating system of Windows 8.  However, I have a program that should be used on a daily basis for which a version of Win 8 is not yet available.  I bought a copy of WIn7 and partitioned the terabyte of hard drive with the intention of installing Win 7 in the new partition and the dual boot of the computer.  However, when I try to install Win 7 from the installation disc, it error with an error message that says in order to restart the installation.  No matter how many times I reboot, the error message occurs at the same point - a few seconds after the message appears saying that the temporary files are copied.  What is the problem?

  Of new computer models that are preloaded with Windows 8 have no support for Windows 7 and there is no native driver Windows 7.

  In addition, when you install older versions in a dual-boot configuration, you must install the older version of Windows (Windows 7), then first 8 windows.

  I recommend to install your Windows 7 in a virtual machine program and use the program here:

  You can use alternatives such as Oracle VirtualBox or VMWare Player.

  https://www.VirtualBox.org/wiki/downloads

  VMware Player;

  http://downloads.VMware.com/d/details/player_401/dGpkYnRwd3didGRwQA==

  Or you can upgrade to Windows 8 Pro and turn on the built in Hyper-V that you can use to run Windows 7.

• Pls help me with this installation problem. Your tips are very necessary.

  I want to install oracle 11.1.6.0 on windows professional xp everything was fine until there is a pop up that remains below
  
  INFO: output-tool: launching browser
  NEWS: economy out only tools...
  INFO: no tool only seconded in this session
  INFO: output only tools are created in a single installation
  INFO: No. sets of tools to be run: 1
  INFO: page ca look: true
  INFO: tools to run exitonly spent: 1
  INFO: Begin to run the configuration wizards
  INFO: Command = C:\WINDOWS\system32\cmd/c call c:\app\doN H\home/bin/netca.bat /orahome c:\app\doN H\home /orahnam OraDb11g_home1 /instype /inscomp typical customer, oraclenet, Java virtual machine, server, ano /insprtcl tcp, nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile c:\app\doN H\home\network\install\netca_typ.rsp
  
  Command = C:\WINDOWS\system32\cmd/c call c:\app\doN H\home/bin/netca.bat has no
  Runtime error: 'c:\app\doN' is not recognized as an internal or external, order
  operable program or batch file.
  
  
  INFO: Configuration assistant 'Oracle Net Configuration Assistant' failed
  -----------------------------------------------------------------------------
  From OUICA *.
  The Oracle Home c:\app\doN H\home value
  Configuration directory is set to c:\app\doN H\home\cfgtoollogs. All xml under the directory files will be processed
  INFO: "c:\app\doN H\home\cfgtoollogs\configToolFailedCommands" script contains all commands that have failed, has been omitted or has been cancelled. This file can be used to run these wizards of configuration outside of YES. Note that you may need to update this script with passwords (as applicable) before running the same thing.
  -----------------------------------------------------------------------------
  INFO:
  The developed /runconfig command is C:\app\doN H\home\oui\bin\runConfig.bat ORACLE_HOME = C:\app\doN H\home MODE = action = configure RERUN = false, $*.
  INFO: as a call internal Plugin or a Java Plugin Invocation tool in the Oracle Home C:\app\doN H\home we use the /runconfig command instead of the order of the plugin
  INFO: Creates a new file C:\app\doN H\home\cfgtoollogs\configToolFailedCommands
  INFO: The option is to replace the existing C:\app\doN H\home\cfgtoollogs\configToolFailedCommands, file it backs up
  INFO: The backup file is called C:\app\doN H\home\cfgtoollogs\configToolFailedCommands.bak
  GRAVE: YES-25031: some of the configuration wizards failed or cancelled. It is strongly recommended that you repeat configuration at this time assistants. Not run successfully the Wizards '' recommended '' means that your system is not properly configured.
  1 check the details on the screen Configuration Wizard panel to see errors resulting in chess.
  2 fix the errors causing these failures.
  3. Select the wizards failed and click 'Retry' to retry them.
  INFO: User selected: Yes/OK
  
  INFO: Begin to run the configuration wizards
  INFO: Command = C:\WINDOWS\system32\cmd/c call c:\app\doN H\home/bin/netca.bat /orahome c:\app\doN H\home /orahnam OraDb11g_home1 /instype /inscomp typical customer, oraclenet, Java virtual machine, server, ano /insprtcl tcp, nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile c:\app\doN H\home\network\install\netca_typ.rsp
  
  Command = C:\WINDOWS\system32\cmd/c call c:\app\doN H\home/bin/netca.bat has no
  Runtime error: 'c:\app\doN' is not recognized as an internal or external, order
  operable program or batch file.
  
  
  INFO: Configuration assistant 'Oracle Net Configuration Assistant' failed
  -----------------------------------------------------------------------------
  From OUICA *.
  The Oracle Home c:\app\doN H\home value
  Configuration directory is set to c:\app\doN H\home\cfgtoollogs. All xml under the directory files will be processed
  INFO: "c:\app\doN H\home\cfgtoollogs\configToolFailedCommands" script contains all commands that have failed, has been omitted or has been cancelled. This file can be used to run these wizards of configuration outside of YES. Note that you may need to update this script with passwords (as applicable) before running the same thing.
  -----------------------------------------------------------------------------
  INFO:
  The developed /runconfig command is C:\app\doN H\home\oui\bin\runConfig.bat ORACLE_HOME = C:\app\doN H\home MODE = action = configure RERUN = false, $*.
  INFO: as a call internal Plugin or a Java Plugin Invocation tool in the Oracle Home C:\app\doN H\home we use the /runconfig command instead of the order of the plugin
  INFO: The option is to replace the existing C:\app\doN H\home\cfgtoollogs\configToolFailedCommands, file it backs up
  INFO: The backup file is called C:\app\doN H\home\cfgtoollogs\configToolFailedCommands.bak.1
  GRAVE: YES-25031: some of the configuration wizards failed or cancelled. It is strongly recommended that you repeat configuration at this time assistants. Not run successfully the Wizards '' recommended '' means that your system is not properly configured.
  1 check the details on the screen Configuration Wizard panel to see errors resulting in chess.
  2 fix the errors causing these failures.
  3. Select the wizards failed and click 'Retry' to retry them.
  INFO: User selected: No.
  
  1... the Netmgr and the ODCA has not been configured properly and that they do not open on windows environment.
  2... the sqlplus, whenever that called upward, aooears and disappears in 1 second
  3 I can't not connecting them to the database. Says: the adapter error
  4... will be 1 start the listner before I can connect and how?
  
  your contribution is very necessary. TNX

  PL examine and understand the Installation Guide with care - especially "Install Location" in table 3-1

  http://download.Oracle.com/docs/CD/B28359_01/install.111/b32006/install.htm#CIHFJICE

  HTH
  Srini

• Faced with the installation of XP SP3 and XP SP2 on HP mini 210

  Hello

  I followed the steps on my computer, HP mini 210, which was completely unusable:

  (1) Mini Partition Master tool used to boot the system.

  (2) remove all partitions, including HP recovery and everything.

  (3) create a new primary partition NTFS and label c.

  (4) restart the system with the bootable XP SP3 or SP2 CD.

  (5) Windows copies all the files and go to "Start Windows"

  ((6) I select one) to install a new Windows XP

  After that XP is not able to identify the partition on the hard drive. It says no hard drive detected or something it starts and asks to press F3 to exit.

  I tried to enter F9 at startup, and it does not show the hard disk; I mean that the HARD disk is not damaged or corrupted.

  Can you get it someone please let me know what to do?

  Hello:

  You must integrate the NM10 chipset Sata driver controller that I zipped and attached below, then XP installs fine.

  Info on how to integrate the driver, please read the guide at the link below, read the Intel section, and read the document that is "slipstreaming" all drivers from Intel.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

• Update portable drive to SSD, problems with the installation of operating system and recovery system

  Compaq Presario CQ71, (model CQ71-317EA) portable system, Windows 7 family 64 - bit edition

  Hi, I tried to upgrade the original 320 GB HDD to a 256 GB SSD.

  After that replacement of the naked NTFS hard drive to SSD format, I tried to do a "factory restore" using the DVD, I created some time ago about recovery. The DVD started and recovery program ran very well, first menus for recovery/system control etc. The problem is that the program would not be allowed a resumption of the plant as the HDD was little different/more than the installed hard drive to factory.

  This is the point I'm stuck at, I reassembled the original hard drive while I find a solution.

  Is it possible to find a workaround to avoid having to order a new disc of Windows 7? Any help and advice in terms of simple-ish would be greatly appreciated. Thank you.

  Bagpuss

  Hello:

  If you can still read all 25 characters of the product key of W7 on the bottom of your laptop, you can make your own plain W7 x 64 Home Premium installation media and use the product key to activate the installation.

  Download the applicable version of the W7 from the link below.  Use the SP1 media files regenerate.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page59?p=470600&viewfull=1#post470600

  Then use this tool to transfer the ISO file downloaded on a key USB 4 GB or DVD.  The tool will make the DVD or drive bootable flash as well.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

• I have a problem with the installation of the streets and trips 2009 on the computer.

  I buy a liscensed and legitimate copy (disk) of Microsofts streets and trips 2009 staples and have installed more than once on the same computer due to re-formatting and now the disc is damaged and I need to re - install again. How to do this without having to buy an another diskand liscense? Once again. I have a liscense and this copy has beenregistered with Microsoft.

  Original title: streets and Trips2009 download?

  Hi Craig,.

  I wish that you contact Streets and Trips for assistance.

  Check out the link-

  http://support.Microsoft.com/ph/1058

  You can also post your request in the forums of Streets & Trips.

  Check out the link-

  http://social.Microsoft.com/forums/is/streetsandtrips/threads

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.