Several issues of the G20 (pixelerrors, IR, standby and Hibernate, TV)

Similar Questions

• LTCC causes bad work at the G20-105 in standby mode

  Hello
  Does anyone have a solution for LTCC dysfunction?
  I have the Qosmio power to the bottom of the screen the value after 5 minutes to be left blank. After another five minutes, a password is required to reactivate the desktop computer - eve of all kinds. If the machine finds himself alone in this State for more than 20 minutes, when I start it up again, the processor performance works 100%, a nVidia popup informs me that LTCC has not responded and which is confirmed in the Task Manager. LTCC is a component of Norton AntiVirus [http://www.neuber.com/taskmanager/process/ccapp.exe.html overweight
  ] which is sold with the G20 and uses up to 40 MB of RAM during normal operation. The machine is actually useless until you restart. Everyone knows similar?

  Hello MeMo

  Here is the answer to Symantecabout this problem:
  There may be a conflict of schedule when Windows loads. For this reason, it is possible to load ccApp.exe later.

  The ccApp.exe value must be removed from the regedit Editor. Do it on this path:
  1. Select start > run and put regedit inside. Click OK
  2. go in entVersion entVersion\Run in Regedit Editor
  3. on the right window, click ccApp.exe
  4. tap on DELETE and then OK
  5. close the registry editor

  After that ccApp.exe should be added to the Autostart folder.

  Good luck!

• I want to create an iPad app with several issues of the magazine even inside

  I want to create a digital magazine for iPad. With Digital Publishing Suite, I know that I can create apps for iPad.

  But there is a problem. Is not clear in the website if with simple editing, I can create an app that contains all issues of the magazine, or if I need to create a new application for each issue of the magazine I want to publish.

  Could you please get out me of doubt?

  Please, I need a quick answer. Thanks in advance!

  This should help:

  http://boblevine.us/Digital-Publishing-Suite-101-single-Edition-vs-multi-Folio-apps/

• Grayed out button standby and Hibernate in windows XP missing button

  Hi, my computer is a Dell (Inspiron E1505) using Windows XP laptop. I had a problem of virus a few weeks ago and had to format and reinstall everything. I'm really bad with computers and apparently I did something wrong because now my sleep button is gray and my Hibernate button is missing. The two were there and works perfectly before the virus.
  I went to check the power options, and there is no Hibernate tab more. I checked the following instructions from Microsoft are supported and I labor thing ACPI and in one of the assignment, he says I'm supposed to check a BIOS thing and I have no idea how to do that. I really really need help with this because my laptop is old and it takes forever to start.

  Aicam,

  For standby and Hibernation work, you must have at least as much disk space on your drive hard as you have RAM in your system.  For example, if you have 4 GB of RAM, you need more than 4 GB of disk space free for standby/sleep extended to work.  How much free space and RAM do you have?

  HTH,
  JW

• Multifunction color HP LaserJet Pro 200: color HP LaserJet MFP M276nw 200 Pro analyzes issues with the new driver (Oct 2015) and El Capitan

  When I updated to the latest HP driver from the HP Support/drivers page, my MFP stopped scan from either a wireless network or directly connected setting.  It seems that if I scan the bed itself, I can scan when the print/scanning felt connected to my Mac, but the real problem is the document feeder.

  I also updated all THE updates Apple, including the HP Easy Scan application.

  When using the document feeder, the process initiated as it should... the first page scans, but does not appear in the HP scanning software... then 10 minutes later, the second page scan (same not result... no picture)... can I get a document could not load the error or something.  When this happens... I can't try to scan anything more until I have restart the MAC and printer.

  Hi @epbarnett70,

  I got a few comments on this issue. Please download and install the HP Easy Scan application to see if it will allow you to scan from the ADF. Use the app for Easy Scan HP.

  HP Easy Scan

• Is there a place I can go to to search for known issues with the applications made with DPS and the iPhone 6?

  I was wondering if there is a post or a site that lists known issues with products and applications on the iPhone 6.

  There was an application made, and for 3 devices that they all have the same problem where sometimes the app is fully loaded on the iphone 6.

  We tried to republish the content. Discovered that the problem is more than likely a connection slow or weak. I meant also more info on if there is a list of some sort with the known problems with some devices. Thank you much.

• compatibility issue between the windows operating system 7 and NERO 7 ultra edition

  y at - it an easy way to make NERO 7 compatible with windows 7

  Thank you

  I took a glance at the website of the company Nero. It seems that Nero 7 is compatible with Windows until Vista operating systems. Here's what the company says about Windows 7 and Nero 7.

  You may need to upgrade to a newer version of Nero.

• On the issue of the port already in use and multiply the application instance?

  I use the message connection to receive sms. When I restart the application, I found the already used port exception. I've been through many posts and believe that BB allows a UNIQUE APPLICATION connecting the port of sms at a time. But the port of sms I know certainly is used only by my candidacy, is somehow wrong to create a second instance of application trying to access this port?

  This question confused me a lot of time, to appreciate someone give me a help.

  This problem has been resolved.

  The two possible solutions for this problem:

  1 re - save the connection string for registery push in the start method. but avoid registering a new when enforcement is woken up by sms push, otherwise it won't get the message.

  public void startApp()
  {
   String[] list = PushRegistry.listConnections( true );
              boolean isByPush = (list != null && list.length > 0) ? true : false;
              if(!isByPush)
              {
                  PushRegistry.unregisterConnection( connString );
                  PushRegistry.registerConnection( connString,Test.class.getName(), "*" );
              }
  
              bbReceiveSmsThread = new BBReceivingSmsThread(connString);
              bbReceiveSmsThread.start();        
  
  }
  
      private static class BBReceivingSmsThread extends Thread
      {
          private boolean stop = false;
          private MessageConnection mc;
          private String connString;
  
          public BBReceivingSmsThread(String connString)
          {
              this.connString = connString;
          }
  
          public synchronized void stop() throws IOException
          {
              stop = true;
              mc.close(); // Close the connection so the thread returns.
          } 
  
          public void run()
          {
              try
              {
                  mc = (MessageConnection)Connector.open(connString);
                  for(;;)
                  {
                      if ( stop ) return;
  
                      Message message = mc.receive();
  
                      String text = null;
  
                      if( message instanceof TextMessage ) text = ( (TextMessage)message ).getPayloadText();
                      if( message instanceof BinaryMessage ) text = new String( ( (BinaryMessage)message ).getPayloadData(), "UTF-8" );
  
                      if(text != null)
                      {
                         //do your message here
                      }
                 }
            }
            catch (Exception e) {}
          }
      }
  

• Performance issue with the query when join OKS and tables of the IB

  Hello

  I'm developing an integration for the automation of RMA through repair. The type of repair order is based on the details of the guarantee. This check must be made for each record.

  Request for detailed below, I wrote, but it of a long way and slows down my program. Without this validation, it works perfectly.

  The problem is the join of tables with OKS IB, he kills performance. I also try to my side,

  any suggestion or help is appreciated. Here's the query in the program:

  SELECT DISTINCT (TYPE |) '-' || service | '-' || status)

  IN v_war_details

  FROM (SELECT TO_NUMBER (linesb.line_number) line,

  DECODE

  (fnd_profile. VALUE

  ('OKS_LINE_MIRR_NAME_OR_DESC'),

  'DISPLAY_NAME', sysitems.concatenated_segments,

  "DISPLAY_DESC", sysitems.description

  ) service.

  linestyletl.NAME TYPE,

  status of ststl.meaning,

  start_date linesb.start_date,

  linesb.end_date end_date,

  oks_misc_util_web.duration_period

  (linesb.start_date,

  linesb.end_date

  ) DURATION OF,.

  TimeUnit.unit_of_measure_tl period

  Of okc_k_lines_b linesb,.

  okc_k_lines_tl linestl,

  okc_line_styles_b linestyleb,

  okc_line_styles_tl linestyletl,

  okc_k_headers_all_b hdr,

  oks_k_lines_b slines,

  okc_k_items kitems,

  mtl_system_items_b1_kfv sysitems,

  okc_statuses_b stsb,

  okc_statuses_tl ststl,

  mtl_units_of_measure_tl timeunit,

  okc_lookups_v rentype,

  Glu mtl_units_of_measure_tl

  WHERE linesb.cle_id IS NULL

  AND linesb.ID = linestl.ID

  AND linestl. LANGUAGE = USERENV ("LANG")

  AND linesb.lse_id = linestyleb.ID

  AND linesb.lse_id (1, 12, 14, 19, 46)

  AND linestyleb.ID = linestyletl.ID

  AND linestyletl. LANGUAGE = USERENV ("LANG")

  AND linesb.chr_id = hdr.ID

  AND linesb.ID = slines.cle_id

  AND linesb.ID = kitems.cle_id

  AND kitems.object1_id1 =

  SysItems.inventory_item_id

  AND kitems.object1_id2 =

  SysItems.organization_id

  AND kitems.uom_code = uom.uom_code (+)

  AND unit of measure. LANGUAGE (+) = USERENV ("LANG")

  AND linesb.sts_code = stsb.code

  AND stsb.code = ststl.code

  AND ststl. LANGUAGE = USERENV ("LANG")

  AND timeunit.uom_code =

  oks_misc_util_web.duration_unit

  (linesb.start_date,

  linesb.end_date

  )

  AND timeunit. LANGUAGE = USERENV ("LANG")

  AND linesb.line_renewal_type_code = rentype.lookup_code (+)

  AND rentype.lookup_type (+) =

  'OKC_LINE_RENEWAL_TYPE '.

  AND (IN) hdr.ID

  SELECT kh.ID

  Of okc_k_headers_all_b kh.

  okc_k_lines_b kl,

  Ki okc_k_items,

  okc_line_styles_v ks,

  csi_item_instances c,

  mtl_system_items_b I have

  WHERE kh.org_id = p_org_id

  AND c.instance_id = p_instance_id

  AND c.serial_number = p_serial_num

  AND i.inventory_item_id =

  p_inventory_item_id

  AND kh.contract_number_modifier IS NULL

  -can be filled

  AND kh.ID = kl.dnz_chr_id

  AND kh.ID = ki.dnz_chr_id

  AND kl.ID = ki.cle_id

  AND kl.lse_id = ks.ID

  AND IN ki.jtot_object1_code

  ("OKX_CUSTPROD")

  AND c.last_vld_organization_id =

  i.organization_id

  AND TO_NUMBER (ki.object1_id1) =

  c.INSTANCE_ID

  AND c.inventory_item_id =

  i.inventory_item_id))

  Service = 'GUARANTEE '.

  AND TRUNC (SYSDATE) BETWEEN start_date AND end_date;

  Not sure where it would be so I put it in the section SQL/PLSQL.

  Kind regards

  Prashant

  Found the solution

  AND TO_NUMBER (ki.object1_id1) = c.instance_id

  replaced by to_char (c.instance_id) = ki.object1_id1 AND

• There is a known issue on the compatibility of Adobe Dreamweaver and Windows 10?

  Hello.

  I just upgraded to Windows 10 and I have Adobe CS6.  Everything seems to work fine, except for Dreamweaver.  Is there a known problem?  A fix?

  Thank you

  Therrien.

  Yes and Yes...

  There are some ongoing discussions about this, a fix that seems to work for a lot of people in W10 is...

  Do a search for CMD

  The icon right-click command prompt and choose Run as administrator

  In prompt, type (make sure that space is there between sfc and /)

  sfc/scannow

  Press enter

  When finished, restart the computer and try again to DW.

• Standby and Hibernate is not available

  I serve these functions for several years on my T40 2373-94U - until they have ceased to be available. Information Lenovo has not resolved the problem, not the internet in general. I have the latest version of the BIOS, and I think that the hibernation is enabled, but do not know what are the correct settings - so I'm using the default values. Power management software is up to date. Command powercfg info line shows that these functions are not available. I wonder if I should re-flashing the bios, or consider that other software (I don't know what on my system too complex) intervenes. Ideas and suggestions are appreciated.

  Thank you

  Frank

  Hello

  Please look at here and here.

• Equium A60 - standby and Hibernate function does not

  I have a Toshiba Equium (or Satellite) laptop A60 - bought in 2004.

  The problem that I have with him, it is that the sleep feature is very + capricious. Times it usually works. At worst it's working only a small proportion of the time. Very bad moments it never works at all.

  When startup fails I open the screen and the computer turn on, I hear the fan and hard drive, but the screen is just black display (although the backlight is on in the background).
  Sometimes, the mouse pointer is visible at the center of a black screen Uni and at other times small forests of window are visible - but the screen is still black.
  The computer is in a State of brain death, and I have to turn it off and restart to get it working again.

  I've been through this forum looking for ideas and tried without notable success the following:
  Disabling wake-up-on-LAN
  * I have already installed the latest version of the BIOS.

  I need to know how to solve this problem because my A60 is getting old and so it tends to become very hot if left running for a long period at a time.

  The total number is A60 - PSA67E 00200D8J

  I am running Windows XP is installed on original Toshiba drive - but with 5 years ' worth of Microsoft updates added on top. When I tried to reinstall the operation usually on the eve of the OS works, but by the time wherever I installed all the extras (drivers card wireless firewall, AV,...), it goes back to be unreliable again.

  Thanks in advance for any help.

  Hello

  > When the night before fails, I open the screen and the computer turn on, I hear the fan and hard drive, but the screen is just black display (although the backlight is on in the background).
  > When I tried to reinstall the operation usually on the eve of the OS works
  > I need to know how to solve this problem because my A60 is getting old and so it tends to become very hot if left running for a long period at a time.

  This means that after the installation of a new OS everything seems to work properly but after a short time the night before fails again one generally, this occurs when the laptop gets hot.
  Is this good?

  Hmm I think you should check if the high temperature does not affect the functionality of the laptop
  This is perhaps the main reason for your question.
  So I recommend to clean the vents and to remove dust using the jet of compressed air (you can get it from most computer resellers)

  In very rare cases, it would be helpful to renew the thermal grease which is placed between the cooling module and CPU.
  But this must be done ONLY by a mobile technician because the procedure of disassembly is really complicated.

  Update the display driver too. This could help to resolve the problem with the black screen.

• Ignoring a call when the phone is in standby

  When the phone is in standby and locked (black screen) and a call comes, is it possible to send it directly to your voicemail? All I do is just wait until voicmail picks it up.

  Most of the calls come to me when the phone is locked and that the only choice I have is either to respond or simply wait until that voicemail picks up.

  Is there another way?

  Joe Parsons

  I just hit the power button two times and the call goes directly to the virtual machine.

• Irish critical update needed to solve the problem of black and white tv on the G20!

  I recently had trouble with the implementation of the tv on my Qosmio G20, I was directed in the direction of an issue of black and white affecting earlier models. The solution to the problem was to use the drivers of the g20 and run 2 reg files.

  Having done that I tried all combinations Irish possible, with still in black and white without success, I then tried UK and got the color.

  I mucked with the recording files and found that there is no Irish layout in the file, then when a user updates to Ireland as their situation they will always get black and white.

  The Ireland uses the exact same settings for television as in the United Kingdom, however if a person chooses UK they fall outside the Irish guides or Irish to choose channels amongst (Ireland is not part of the United Kingdom)

  I found the settings for the United Kingdom-

  [HKEY_LOCAL_MACHINE es\ttv200x\Parameters\44]
  @= "United Kingdom".
  "FreqBoundary" = dword:000493e0
  "LB_VideoStandard" = dword:20000080
  "LB_AudioStandard" = dword:00020000
  "LB_ShiftFreq" = dword:00000abe
  "HB_VideoStandard" = dword:20000080
  "HB_AudioStandard" = dword:00020000
  "HB_ShiftFreq" = dword:00000abe

  Thinking the 44, was the dialing code for the United Kingdom (which took a while to understand), I added an entry to register with exactly the same parameters but with the Ireland and 353 above.

  [HKEY_LOCAL_MACHINE es\ttv200x\Parameters\353]
  @= "Ireland".
  "FreqBoundary" = dword:000493e0
  "LB_VideoStandard" = dword:20000080
  "LB_AudioStandard" = dword:00020000
  "LB_ShiftFreq" = dword:00000abe
  "HB_VideoStandard" = dword:20000080
  "HB_AudioStandard" = dword:00020000
  "HB_ShiftFreq" = dword:00000abe

  I now have color tv under the Irish settings in the library, I also make it sound now, where before I didn't. I hope that the code above will add registry files named ttv2_regdata_20050111.reg that comes as part of the correction of pilot http://support.toshiba-tro.de/kb0/TSB5800V20000R01.htm to the problem...

  Thanks to jimi in what follows after http://forums.computers.toshiba-europe.com/forums/thread.jspa?forumID=42&threadID=11145 for pointing me in the right direction.

  Hope this helps someone...
  laters taters...

  Hi Joseph

  It is very nice to hear that you solved your problem and thanks for the comments!

  Good luck!

• 8 issues of the new owner of the Satellite Pro L300

  Hello to all forum users!

  I bought a new Toshiba, the Satellite Pro L300 laptop and have until January 14 to test - if it looks like it is not working properly I will return it to the store where I bought it.

  Here is a list of questions I have:

  1. whenever I turn on the laptop or it is suspension or hibernation mode, and when I disable it, the cd/dvd drive makes a clumsy mechanical noise.

  It seems to me like the cart that transports the laser and optics is running in a mechanical stop.

  Is this normal?

  2. There is a hot sub-pixel on the screen (in blue) and according to the Toshiba info in the box, this is normal and does not return.

  Should I worry about this?

  3. when I run the test memory at the start of the system, she says she'll start windows automatically at the end of the trial and show me the results of the test.

  It performs the test, Vista boot, but I see no reports of results.

  Where can I find the report?
  Is there a known issue with this test?

  4. the service program Toshiba to perform diagnostics of slot Vista does not work. Whenever I run the test (PCdiag.exe) I get an error message Vista saying a defect was found in the KERNEL32.dll module.

  Where can I get a fix for this?
  I have already installed the updated files on the Toshiba web site for the "Value Pack", which is where this utility, but still not the error message.

  5. I want access the settings of the bios at startup, but have not found a way to do it again.
  F2 gives me a menu for memory test or normal boot system.
  ESC is not me in bios Setup either.
  There is a utility for bios Toshiba that I can run Vista, and I see that any upgrade bios firmware should also be done through Vista.

  Is there a way to access bios at startup?

  6. I would like to run XP on this system and realized that this model (Pro L300 PSLB1E) is compatible XP, and I should be able to download all the drivers from Toshiba to run under XP.

  Does anyone do this?

  7. the laptop and configured Vista Basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for "Vista OEMAct Business." I was captivated by this laptop as the option to revert to XP Pro with Vista business. The box did not come with any CD or DVD and no manuals explaining how to install Vista Business.

  This is reason enough to return the laptop in the store where I bought it, which is a chore, I prefer to avoid if I can install Vista Business.

  Can someone help me understand what is happening here?

  8. is there a way to contact technical support by e-mail?

  Thanks in advance to anyone who can answer all of these questions!

  Hello

  Two weeks ago, I worked several days on friends Satellite Pro L300. Your questions are interesting and I will try to provide an answer or comment.

  1 this is normal behavior. I noticed it on other models of computer laptop too. Right now I use Satellite P200D and I noticed the same thing.

  2. of course, you may have noticed a dead on the screen pixel and more on what you can read on
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ8702EI0000R01.htm

  3. maybe follow links can help a better understanding:
  http://web1.Toshiba.ca/support/TechSupport/TSBs/all/-TSB001369.htm
  http://www.bleepingcomputer.com/tutorials/tutorial146.html

  4. what to say about this? I t has not noticed this error and I can recommend just reinstall full VAP. Remove preinstalled system, restart your computer and install the latest version of the Toshiba download page.

  5. When you start the laptop downstairs you can find info how to enter the BIOS settings. It usually takes F2. I really don't understand what is wrong in your case, but must work F2. Press immediately after turning on your laptop. Press several times. You have to work

  6. If you can find the download page of drivers, tools and utilities on Toshiba Windows XP Home edition, you should be able to install and configure Windows XP Home edition on this model of laptop. For the installation of Windows XP edition family please use Windows XP SP2 home edition.

  7. This must be clarified with your local dealer. The fact is that Toshiba doesn t offer any CD/DVD and recovery DVDs must be created by the owner of the laptop. I presume that you didn t seen or read Toshiba reminder about it. This point explains exactly what needs to be done.
  The recovery media can be created using the preinstalled Toshiba Recovery creator. The shortcut is placed on the desktop.

  8. I'm afraid, you must contact the hotline, but as far as I know Toshiba's toll-free hotline.
  Call and ask if there is something you want to know.

  Good luck!