SFC.exe Unable to fix the jscript9.dll

Similar Questions

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Win SAT.exe Unable to locate component MSVCR100.dll was not found

  I get error when you try to use REFREASH NOW in control of Panel\Performance information and tools is when the error # Win SAT.exe Unable to locate component MSVCR100.dll is not found appears. I guess that I need this file can someone please HELP me thank YOU

  Hello

  Were there any changes made to your computer before this problem?

  Perform the steps mentioned below and check if that helps:

  Method 1: SFC scanner on the computer to ensure that the system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Follow the steps proposed by O of Marilyn and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-program-cant-start-because-msvcr100dll-is/5c9d301a-2191-4EDB-916e-5e4958558090

  I hope this helps.

• SFC/SCANNOW can't fix the corrupted - files windows 7

  SFC/SCANNOW finds corrupted files, but cannot fix them in Windows 7 ultimate.

  I don't have the installation disc.

  Thanks a lot for your help!

  Hi MarkmBha,

  Thank you for visiting Microsoft Community.

  According to the description of the issue scan sfc could not fix corrupted files. I suggest you to refer to the suggestions provided in the below threads and see if it helps you to solve the problem. Make sure that you follow the steps that is marked as answer.

  sfc/scannow detected some files corrupted... unable to fix... What do I do?

  Note: This thread deals with Windows Vista but also applies to Windows 7.

  Keep us.

  Kind regards

• SFC/scannow can't fix a few dll files.

  Original title: SFC/scannow.

  SFC/scannow

  Cannot repair the files:
  MSADDS.dll
  msdatl3.dll
  msdaosp.dll
  I just reinstalled system and at the same time, I have this error

  This error is related to the Microsoft Data Access Components. See the following topics:

  http://support.Microsoft.com/kb/301202

  Alternatively, you can search your computer for malicious software:

  There are some that will hide your files/folders so that you don't normally see them. I strongly suggest to run a scan on your computer with your antivirus/antimalware software. If you need to, you can also use the Microsoft Safety Scanner, it's free:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also, if your files are hidden, check out the following article on how to display the:

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

• I get error messages ie3sh.exe - Unable to locate the BHO component. DLL not found message when I start my computer. I do not have the reinstall disk that I need to do.

  I also 80070490 error codes and C355. I used CCcleaner to clean my registrys and used the system preparation tool. I regularly use spybot search and destroy for malware protection and search for viruses with my anti-virus program. What should I do? Thank you.

  BHO. DLL & IE3SH problems on my computer starts?
  http://answers.Microsoft.com/thread/ffbe5016-84d9-47E0-8303-43419c1abba5

• Unable to fix the daylight of saving time and windows time zone

  original title: summer time (dst} and zone schedule windows.) will not correct when using fix it Center or by any other recommendations suggested by windows solutions why.

  summer time (dst) and time zone windows, correct, using fix it Center or by all the recommendations of qther by the windows Solution Center please notify

  Hello

  ·        What operating system is installed on your computer?

  ·        What happens when you run Microsoft fixit?

  ·        Which is exactly the problem that you are facing in the time and time zone in Windows?

  Please see: How to configure daylight saving time for Microsoft Windows operating systems

  http://support.Microsoft.com/kb/914387

  Post back with the required information so that we can help you further.

• Custom.exe - Unable to locate component. pptool32Ex.dll was not found.

  I have a laptop HP Pavilion Entertainment with Windows Vista is the operating system. I install the software of Penpower Jr - 50 for the success of laptop. But, when I click the Penpower icon on the start menu, it will not start (failed to start) and above error messages were displayed on the screen. I uninstall and re-install again. But the same error messages appear on the screen.  Can someone tell how to fix this problem so I can use the tablet.

  I did not have this problem when the same Penpower Jr - 50 software was installed in another computer with Windows XP as the operating system.

  MapleBridge

  Hello WK123,

  In addition to the response of Bindu, you can check with the provider of software for the Penpower Jr program to verify that the program is compatible with Windows Vista. If so, you can check that the Pen Power program is uninstalled from Control Panel > programs > programs and features and then try to reinstall the program to check if the problem persists. Alternatively, you can try to install the program by using a different user account.

  Regarding the additional error, please relay if any additional programs have been installed recently. You can also run a scan of Antivirus\malware by using Antivirus software.

  Also, here is a link to a Microsoft Security Essentials, an anti-malware solution free for your computer that helps protect against viruses, spyware and other malicious software:

  Help protect your PC with Microsoft Security Essentials

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I fix the xactengine2_9.dll of DirectX

  I'm having the same problem. I tried to reinstall DirectX repeatedly, but I get the message "zactengine2_9.dll is either not designed...". "error each time. This bug is very annoying and is to perform a number of video games.

  I have scanned for viruses with many programs and none were found.
  Any help is appreciated.

  Try the steps in the article provided

  http://pcsupport.about.com/od/findbyerrormessage/a/xactengine2_10-DLL-not-found-missing-error.htm

• System cannot find sfc.exe

  Hello, I tried to restore some 32 files that my task manager was not working because he was missing a file called "taskmgr.exe". So I opened command prompt and typed in 'sfc/scannow' and you press on enter. And he says that the system is not: C/Windows/system32/sfc.exe. I had the same message for the Task Manager when I try to open it, it's like all the exe files are moved from the system32 folder. How can I return the sfc.exe file?

  I run windwos Vista.

  If you do not have a DVD of Microsoft Vista, borrow one from a friend.

  Read this tutorial on how to do a repair installation:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

  Mick Murphy - Microsoft partner

• During the attempt to re - install the iTunes software, I got the Windows 126 error message. APSDaemon, exe-Unable to locate component. MSVCR.90.dll was not found. Re-installing may fix this problem

  I use Windows XP PRO Sp 3. I tried to open an iTunes download & got this message. "APSDaemon.exe that this application was able to start. Could not locate the component that msvcr.90.dll was not found. Re-installing may fix this problem. "
  All this happened after I tried to install a new update Apple iTunes. He kept saying that he could not install... I tried several different things to solve this problem, including doing a system restore in frustration, for 2 days before today... I tried to update iTunes, not always the case. Help, I'm a no techno, so please do not just refer me to somewhere else, I will never understand what I'm told to do, whenever I am sent somewhere else, I can't solve my problem & give up in frustration. Please can someone take pity on me & guide me through the fix?
  A related problem, I tried to run iTunes from the desktop, but I got was the Mini audio player.
  I just tried to recreate that & got again the error messages, the one listed above main & another one that says "iTunes is not installed correctly. Please re - install. Error 7 (Windows error 126).
  Whenever I try to re - install, I get the error again on the component .dll.
  I hope that's enough info to try & help me. I really need this fix to work as I have many meditations downloaded on iTunes, because Windows Media Player could not open the files.   It would take me hours & hours to find where they came, they were downloaded over 4 years!
  Thank you in advance.
  Sylvia

  If you have not had luck in iTunes (https://discussions.apple.com/community/itunes/itunes_for_windows?view=discussions#/?tagSet=1234) forum, uninstall and reinstall iTunes as described below:

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.  (If you are using Vista, see THIS instead).

  Go to control panel > Add/Remove programs
  Remove these applications in the following order (do not restart your computer if you are prompted during this process):

  1 iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4 Hello
  5 Apple Application Support (iTunes 9 or later)

  6. iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)

  7. iPod Updater

  8 QuickTime

  Open my computer > C: > Program Files
  Delete these files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Follow these steps if the message "cannot delete iPodService.exe: it is used by another person or program" appears when you try to delete the folder of the iPod.

  1. Make sure that you have iTunes and iPod Update utility are not open.
  2. Press Ctrl-Alt-Delete.
  3. Select Start Task Manager.
  4. Click the processes tab.
  5. Locate the iPodService.exe in the list.
  6. IPodService.exe-click and choose end process.
  7. Quit Task Manager.

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  NOTE: If you have trouble uninstalling applications, or if you have a problem, reinstall iTunes because the installer complains that it can not uninstall the current version of iTunes, see the 'Installation issues' section below.

  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

  Installation problems

  There are several tools to deal with problems installing or uninstalling applications.  If you have these problems, the following should help.  Before using one of these tools (including #3), you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  1 Microsoft has a program install and the resolution of the problems of the uninstalling which is supposed to "work better" and be "safer" to use the old Install Cleanup Utility (3 below).

  2. free Revo Uninstaller.  You can also download a trial version of uninstaller Revo's ' Pro', which has a few more aggressive cleaning options, but this should not be necessary.

  3 Microsoft Windows Install Cleanup Utility.  Although this tool has been the preferred tool to deal with the problems of Windows Installer, Microsoft removed from Microsoft download servers because it seems sometimes deleted more than he was supposed to (I believe this was linked to Office uninstall).  You can still get Windows Installer Cleanup here--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html utility

• SOLVED! Explorer.EXE - unable to locate component: the application failed to start because iertutil.dll was not found. Re-installing the application may fix the problem.

  The manifestation of this issue, it is that you cannot use your computer, because the desktop icons and the taskbar are missing

  It's the perfect solution for this issue:

  Once you see the message, press ctrl + alt + delete to start the Task Manager

  Click new task, and then click Browse

  Navigate to the following path c:\windows\softwaredistribution\download\e9e3bc7b49018c1f53cc0d1bd73cad37\sp3gdr

  at the bottom of this dialog box, change the 'programs' to 'all files '.

  Make a right click on the "iertutil.dll" then copy files

  Go again to c:\windows\system32 and paste there

  You should notice the "iertutil.dll" filed copied in the folder system32, otherwise, you will have to repeat the procedure and do not forget that it is copied

  Restart the computer

  You may notice that the IE8 is now complete installation and may ask you to restart again

  Restart the pc and voila, you now have a working computer

  Here are our roadmaps which has been proven in many cases which have already been resolved
  Please follow the roadmaps religiously

  Road map 1:

  Once you see the message, press ctrl + alt + delete to start the Task Manager
  Click new task, and then click Browse
  Navigate to the following path c:\windows\softwaredistribution\download\e9e3bc7b49018c1f53cc0d1bd73cad37\sp3gdr
  NOTE: IF YOU DO NOT SEE THIS PARTICULAR FOLDER, GO TO THE ROADMAP 2, REASON FOR THIS IS THAT THE FOLDER OPTIONS MUST HAVE BEEN SET HIDDEN
  at the bottom of this dialog box, change the 'programs' to 'all files '.
  Make a right click on the "iertutil.dll" then copy files
  Go again to c:\windows\system32 and paste there
  You should notice the "iertutil.dll" filed copied in the folder system32, otherwise, you will have to repeat the procedure and do not forget that it is copied
  Restart the computer
  You may notice that the IE8 is now complete installation and may ask you to restart again
  Restart the pc and voila, you now have a working computer

  2 Roadmap

  Once you see the message, press ctrl + alt + delete to start the Task Manager
  Open a new task, and then type CMD.
  type this in the command line - copy c:\windows\system32\dllcache\iertutil.dll c:\windows\system32
  You should see the message "1 file copied.
  restart the system
  You may notice that the IE8 is now complete installation and may ask you to restart again
  Restart the pc and voila, you now have a working computer

  3 roadmap

  Once you see the message, press ctrl + alt + delete to start the Task Manager
  Open a new task, and then type %windir%\ie8\spuninst\spuninst.exe
  IE8 uninstall wizard will pop up and follow the wizard
  It maybe of instances that error message will appear just close the error message and continue uninstalling
  Once the system is restarted, it will start normally and reverted to the previous version of Internet Explorer
  Reinstall setup of stand-alone of ie8
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43

  MYRL LESHEN LEE
  Technical Manager
  Microsoft Technical Support Australia & New Zealand

• MSConfig.exe - Unable to locate component... This application has failed to start because MFC42u.dll not found. Reinstalling the application may fix this problem.

  I use XP.

  When I try to solve the problem by running sfs/scannow I get the message:

  "Files required for windows runs correctly must be copied into the DLL cache... Insert you windows XP Professional service pack 3 cd now.

  My machine came with XP was preinstalled on the D: drive.  I did the HP recovery disk when I got the machine, but these discs do not work for this and I can't seem to redirect the scan to look for on the disk "D" assuming that it is the right thing to do.

  I ran windows one care and he says I have 150 errors, that it cannot correct.  Until these problems started, it never reported more than one error could not resolve.

  David Y has the correct syntax to decompress the file.  You have already the program 'develop' on your system.

  The files that you see in i386 with underscore as the last character are compressed files (to save space). This type of compression is not the same when you say XP to compress a file.

  Sometimes it is useful to understand that you can unzip these files there is you need if you come across one that is missing or suspect some time later.   Browse this folder and you will see a large number of files compressed, where the last character is an underscore character.

  Remember - sfc/scannow will not replace the missing files and it won't replace not a file may have been overwritten by another program, but you can always develop a new copy if you need to.

  Just make sure to type the commands to make it work.

  I have my XP Service Pack 3 copied my E drive installation CD in a folder called E:\xp_source, and when I expanded my mfc42u.dl_ file I got a result like this:

  C:\>expand e:\xp_source\i386\mfc42u.dl_ c:\windows\system32\mfc42u.dll

  Microsoft (R) file expansion utility Version 5.1.2600.0

  Copyright (C) Microsoft Corp 1990-1999.  All rights reserved.

  Expansion of e:\xp_source\i386\mfc42u.dl_ to c:\windows\system32\mfc42u.dll .

  e:\xp_source\i386\mfc42u.dl_: bytes 378327 extended to 981760 bytes, 159% increase.

  The new expanded file will not have the time now to this topic, so don't expect to see that - just check that the missing file is present.

  There should be some unnatural effort to actually remove one of 3498 XP as your protected files.  If you rename or delete just one of these files, Windows File Protection will be quickly and quietly replace it unless the Windows File Protection is also broken, so you can figure out how your file became missing in the first place.

  If manually, you delete or rename a file monitored system, you will see an event like this in the Event Viewer system log when the Windows File Protection replaces:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64002
  Description:
  File replacement was attempted on the protected system file c:\windows\system32\mfc42u.dll. This file was restored to the original version to maintain system stability. The file version of the system file is 4.1.0.6151.

  I would suspect some quarantied app antivirus or anti-malware (actually deleted) your file for you and that would be a problem.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  What you use, you can follow up with these:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  The scans by operating clean, then to solve any problems.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Lack of Api-ms-win-shcore-scaling-l1-1-1.dll causing my win7 x 64 system unable to run the compiled exe file

  Dear Sirs

  Recently, I run the exe compiled from visual studio 2012.
  The failure comes out the lack of Api-ms-win-shcore-scaling-l1-1-1.dll that is detected by the dependency walker tool.
  Operating system is Win7 x 64.
  I wonder where to find the missing dll or no solution for this problem.
  (Only x 86 version Api-ms-win-shcore-scaling-l1-1-1.dll can be found...)

  Sincerely appreciate your help!

  Chris

  Hi Chris,

  Thanks for posting your query in Microsoft Community.

  As described in the question, I would say that you re - ask your question in the MSDN Visual Studio forum rather than on this forum. MSDN is watched by other professionals in computing and to developers who use Visual Studio, which would more than likely be able to help.

  MSDN forum: Visual Studio

  Hope this information is useful. Please, do not hesitate to post in case you have any other question related to Windows in the future, we will be happy to help you.