SG300-28MP power inline or stop?

I have a client with a SG300 28MP and they want to be able to stop or turn on wi - fi when ever.  Since I'm AMX touch mounted panels in various places, I want to give them the opportunity, via touch screens to enable or disable, or even to choose power switch time by activating/deactivating the POE on network wi - fi (direct connection to the APs only) ports.

Issues related to the:

I should just use ' shutdown/no shutdown' or 'inline power inline never/power auto' orders?  What is the difference that this application is concerned?

When I use the command "power inline [auto |]» never]' I get the following switch:

SG300-28MP(config)#int range gi22-24


SG300-28MP(config-if-range)#power inline auto


SG300-28MP(config-if-range)#09-Nov-2013 00:34:12 %LINK-I-Up:  gi22

    09-Nov-2013 00:34:13 %LINK-I-Up:  gi23

    09-Nov-2013 00:34:14 %LINK-I-Up:  gi24

    09-Nov-2013 00:34:17 %STP-W-PORTSTATUS: gi22: STP status Forwarding

    09-Nov-2013 00:34:18 %STP-W-PORTSTATUS: gi23: STP status Forwarding

    09-Nov-2013 00:34:19 %STP-W-PORTSTATUS: gi24: STP status Forwarding

    09-Nov-2013 00:34:29 %LINK-W-Down:  gi22

    09-Nov-2013 00:34:30 %LINK-W-Down:  gi23

    09-Nov-2013 00:34:31 %LINK-W-Down:  gi24

    09-Nov-2013 00:34:32 %LINK-I-Up:  gi22, aggregated (1)

    09-Nov-2013 00:34:33 %LINK-I-Up:  gi23, aggregated (1)

    09-Nov-2013 00:34:34 %LINK-I-Up:  gi24, aggregated (1)

    09-Nov-2013 00:34:36 %STP-W-PORTSTATUS: gi22: STP status Forwarding, aggregated (1)

    09-Nov-2013 00:34:37 %STP-W-PORTSTATUS: gi23: STP status Forwarding, aggregated (1)

    09-Nov-2013 00:34:39 %STP-W-PORTSTATUS: gi24: STP status Forwarding, aggregated (1)

Just out of curiosity I and W represents in the returned status of LINK and STP?

Hello Vini, if you stop the port, it won't allocate power on pairs.

-Tom
Please mark replied messages useful

Tags: Cisco Support

Similar Questions

  • Power Manager has stopped working - BadImageFormatException - resolved

    Moderator note: there is no way to mark a simple/first post as "resolved." I moved from belgam sabermanat 2nd position so it can be tagged accordingly.

    Thanks for the report.

    Z.

    Tale of woe and recovery.

    I recently acquired an i7 ThinkPad x 201 with 8 GB of RAM and 500 GB drive

    I did a fresh install of WIndows 7 Ultimate x 64 with SP1

    I ran Windows Update and applied the fixes about 80 - all the critics and most of the other

    I downloaded the Lenovo system update and install everything except the BIOS updated as the current BIOS is identical to my other x 201 BIOS Version 1.37 (6QET67WW) - I prefer not to do an update of the BIOS, unless absolutely necessary.

    The Manager toolbar of power present in the taskbar, but I can't start to eat.  Or I can it starts application tools ThinkVantage or by pressing Fn - F3.

    Each of them immediately to bring up a Windows error dialog box that says Power Manager has stopped working.  The splash screen appear not at all.  The details are:

    Description:
    Stopped working

    Signature of the problem:
    Problem event name: CLR20r3
    Signature of the problem 01: pwmui.exe
    Signature of the problem 02: 1.0.0.0
    Signature of the problem 03: 4f626f8a
    Signature of the problem 04: PWMUI
    Signature of the problem 05: 1.0.0.0
    Signature of the 06 problem: 4f626f8a
    Signature of the 07:378 problem
    Signature of the 08:0 problem
    Signature of the problem 09: System.BadImageFormatException
    OS version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033

    The Version of the file is the same as my other x 201 (1.0.0.0), but the closing date is Thursday, March 15, 2012 02:53:40 while on my other machine is October 3, 2011 23:01:27.  The update is also 15/03/2012 whereas the other machine is 04/10/2011.  It seems that Lenovo rebuilt the package in March 2012.  Manager supply on the other machine says it's 3.64.  The Lenovo site (http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-61432#power) lists 3.64 but when you go to the download page it says it's 6.07.  I tried to uninstall Power Manager and install the 3.64 one from the download site.  The same problem.  Finally, I uninstalled the power manager and installed the 3.40 version I downloaded when I got to the other machine.

    So, how Lenovo released a package with a picture of the wrong file?

  • "Power Manager has stopped working" on Win7 X120e

    Operating system: Win7 (mainly so far)

    BIOS version: 1.17

    Power man: 6.45

    When you click on the taskbar icon, Power Manager will not open, which gives "Power Manager has stopped working". This has been the case for quite a while and I have struggled to find someone with the same problem that could signal a problem.

    I tried to uninstall and install most of the versions of the Manager of power until later. I have the latest version of the BIOS of the machine and Win7 is the most up-to-date (except for the most recent updates).

    I would like to be able to handle the power supply via the Power Manager options. Any ideas?

    Thank you, very much appreciated.

    It turns out, after much more research, than the .net framework necessary updated. Windows Update sorts basically this - could do with some official documents on that?

    So a simple fix in the end.

  • TOSHIBA Power Pack pack stopped working after 12 months

    Can't believe Toshiba power pack stopped working 12 months and 20 days after purchase.
    I bought the warranty 'extended', but it does not cover something external to the laptop.

    The unit itself is fine, but the Accessories pack must be less than this model (I've never had this problem with other laptops work).

    Cost was $ 110 to replace.

    Thanks Toshiba.

    Hello

    I agree with you, it's too expensive to buy a new one for $110. But the time for power supply operation 12 months is normal

  • Pavilion g6: enter the password administrator or power on password: stop the 53325402 number

    Just put new memory in my laptop, now he asks me to power on password or password administrator after 3 attempts get: stop the 53325402 number

    Have no idea what please help

    Hello

    Enter: 42083424

    Kind regards

    DP - K

  • The mouse freezes at startup properly off. Mouse only thaws and works correctly when I hold the power button to stop and turn back.

    I just got a new Inspiron 1545 computer 2 weeks ago and it works fine but I got a problem for the last two days where my mouse will freeze after that I stopped it using the stop option. When my computer starts you can move the mouse, but after a few seconds, it freezes, and you can't move the mouse but the keyboard works. I try to restart the computer with the option to reboot from the start menu and when it starts up to the top of the mouse freezes still. No matter how many times I try to stop or restart properly mouse unlock not. It only works if I stopped it by pressing the power and then switch on again. Any ideas as to what I could do to fix this?

    The sad truth is that the mouse freeze problem is back. I searched the forum for other solutions, but so far without success.

    I am currently using MS Wireless Mobile Mouse 3500 and just to make sure that the problem is with the mouse, I inverted this mouse on my other laptop which works also on Windows 7. Mouse freeze problem is replicated, which never happened before for my other laptop.
    Conclusion, until Microsoft is able to solve this problem, I opted for Logitech. I bought a Logitech M235 wireless mouse last night and keep your fingers crossed that the mouse freeze problem will disappear.
    Life is too short to be stressed more mouse freeze problem.

  • replacement for the power button cable / stop, power LED and HDD LED

    Need to find cables to replace the header 9 pin on the switch / stop, power led and HDD LED indicator.  It is a PC HP Pavilion Media Center m8530f.

    Additional details - no one A High School HE thought that the switch was bad on this PC, so they tried to replace it, but ended up damaging the cables.  The real problem was a power supply dead, so I ordered a new, but now I need to fix this as the person IT damaged the power button, power LED and HARD drive cables.

    Here is a link to your m8530f on HP Part Surfer. I think the part you want is "power switch cable assembly (Black Canyon), part number 5070-2940. It looks like it is available, but you can always call HP and ask.

    Frank

  • A 200 - 3 small buttons by the power button has stopped working

    Win XP, SP2, 1 GB memory, nothing too special.

    These cute little buttons have stopped pulling up of software. The only function seems to work is that next to the switch lights up the machine!

    Any ideas?

    The only recent change is that I've recently updated Microsoft Office 2003.

    The buttons ARE set to launch software.

    Hello

    Well, I put t know why it doesn't work, but these 3 small buttons are controls of Toshiba.
    Have you tried to update the driver controls? You can find it on the Web from Toshiba site

    http://EU.computers.Toshiba-Europe.com and support & downloads.

    In addition, you can check the settings. I m not sure but I think you can find them in the Panel.

    Good bye

  • Tecra S10 - USB-power does ' t stop the power saving mode

    I have the following problem.
    USB power on the right side three ports USB does´t closed the power saving mode.

    Only when the system is switcht off power on USB ports is disabled.
    What can I do?
    Thanks for a response.

    Hello

    You can check in the BIOS if the option called USB Sleep & Charge has been enabled or disabled.

    Change this setting and save the changes. Then start again.

    Check if you can see any improvement.

    Welcome them

  • Satellite A60 power button / light stop in 2 colors. blue & orange

    Hi can someone tell me why power button lights in 2 different colors Blue and orange every thing seemed to be sure best ok
    Thanks in advance

    This will happen if your laptop is in stand by mode.

  • Power saving mode stops my PC after a few minutes of play Eve, an online game. How can I fix this?

    Power save comes into play after a few minutes of play Eve, an online game.   I then have to manually turn off the PC before it can be restarted.  I adjusted the power settings on the PC and it happens to sleep.  I contacted Dell and downloaded a difficulty that has not worked.  I have a question pending for Eve support staff, but thought that I can get a fix here.

    Check power Panel ctrl if win xp, and together turn it off hard drive option never, you can also disable the screen saver, disable standby of the system or in Hibernate besides.

  • HP Probook 4520 s not power up! Help with the power button light / stop!

    HP Probook 4520 s not power up! The power led button summons and after 3 seconds its the same constituent but still not be able to. Please help me with this problem.

    It was the last resort.

    Your laptop seems to have a hardware failure on the system board.

    It will require the replacement of the card system to return the laptop to a useful condition.

    I wish I have had better news for you.

  • DHCP on cisco sg300-28mp

    This series dg300-28mp supports dhcp server and can play this role?

    Yes, up to 8 DHCP pools.

    -Tom
    Please mark replied messages useful

  • Password of the BIOS/Power-On has stopped working

    The password to connect to my laptop (G62 - 227 CL product number) suddenly did not work one morning.  I know that I did not change and do not believe that anyone could have.  After 3 attempts of password failed, I get a message that says "system off Key: 57991074.

    I tried to find this number on the forums of HP and in google without result.

    Alright. I had it was windows password but it is not supported.

    The password configured on the system's password BIOS/market and the only way to bypass this screen to reinsert (remove and reinsert) the CMOS/RTC battery on the laptop.

  • System freezes requiring a power coercive start/stop. The error concerns JMB38X.

    There are 4 events in the case where the Viewer every time the system crashes.  View all source as PllugPlayManager.  How can I fix?

    1: the device 'JMB38X SD/MMC Host Controller"(PCI\VEN_197B & DEV_2382 & SUBSYS_30FB103C & REV_00\4 & 995034 & 0 & 0028 2A) disappeared from the system without first be prepared for removal.

    JMB38X SD/MMC Host Controller
    PCI\VEN_197B & DEV_2382 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0028
    00000000

    2: the device 'JMB38X SD Host Controller"(PCI\VEN_197B & DEV_2381 & SUBSYS_30FB103C & REV_00\4 & 995034 & 0 & 0028 2A) disappeared from the system without first be prepared for removal.

    JMB38X SD Host Controller
    PCI\VEN_197B & DEV_2381 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0228
    00000000

    3: the device 'JMB38X MS Host Controller"(PCI\VEN_197B & DEV_2383 & SUBSYS_30FB103C & REV_00\4 & 995034 & 0 & 0028 2A) disappeared from the system without first be prepared for removal.

    JMB38X MS Host Controller
    PCI\VEN_197B & DEV_2383 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0328
    00000000

    4: the device 'JMB38X xD Host Controller' (PCI\VEN_197B & DEV_2384 & SUBSYS_30FB103C & REV_00\4 & 2A 995034 & 0 & 0028) disappeared from the system without first be prepared for removal.

    JMB38X xD Host Controller
    PCI\VEN_197B & DEV_2384 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0428
    00000000

    There are 4 events in the case where the Viewer every time the system crashes.  View all source as PllugPlayManager.  How can I fix?

    1: the device 'JMB38X SD/MMC Host Controller"(PCI\VEN_197B & DEV_2382 & SUBSYS_30FB103C & REV_00\4 & 995034 & 0 & 0028 2A) disappeared from the system without first be prepared for removal.

    JMB38X SD/MMC Host Controller
    PCI\VEN_197B & DEV_2382 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0028
    00000000

    2: the device 'JMB38X SD Host Controller"(PCI\VEN_197B & DEV_2381 & SUBSYS_30FB103C & REV_00\4 & 995034 & 0 & 0028 2A) disappeared from the system without first be prepared for removal.

    JMB38X SD Host Controller
    PCI\VEN_197B & DEV_2381 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0228
    00000000

    3: the device 'JMB38X MS Host Controller"(PCI\VEN_197B & DEV_2383 & SUBSYS_30FB103C & REV_00\4 & 995034 & 0 & 0028 2A) disappeared from the system without first be prepared for removal.

    JMB38X MS Host Controller
    PCI\VEN_197B & DEV_2383 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0328
    00000000

    4: the device 'JMB38X xD Host Controller' (PCI\VEN_197B & DEV_2384 & SUBSYS_30FB103C & REV_00\4 & 2A 995034 & 0 & 0028) disappeared from the system without first be prepared for removal.

    JMB38X xD Host Controller
    PCI\VEN_197B & DEV_2384 & SUBSYS_30FB103C & REV_00\4 & a 2, 995034 & 0 & 0428
    00000000

    Update your motherboard chipset drivers, drivers for network devices, video device drivers and audo drivers as well as drivers for any hardware that you have connected the machine to web sites for the individual manufacturer support.  Do * not * use any integrated methodology or request for update of the third-party driver to do this.  Manually locate and download the appropriate drivers and install them.

    Maye you want to even check in a BIOS update to card mother yout.

    Otherwise - maye you have defective hardware / dying.

Maybe you are looking for

  • Adding a suffix to a file using applescript

    I use a drop/app to add a suffix to name my file. I would like to add the word '_THUMBNAIL' before the file extension. Currently, it leaves the file extension, add _THUMBNAIL and add the extension again. I know not part of it has to do with the line

  • Message of invalid version

    I downloaded the version 8.0.1 a couple of times, but the web page of Google always tells me that I need to improve. Your own web page may not know what version I'm on?

  • Hard reset

    Recently, I bought a HP Pavilion x 360 a232nd. Tonight, I tried to update the software and the bios via the HP program on the laptop. Unfortunately, something went wrong during the update and the laptop froze. The screen is activated, the mouse curso

  • Cannot get MY. admin password. How to RESET?

    I don't remember what I do after clicking on F8 at startup to the top on how to reset my admin password.. I don't I remember not for the life of me and customer service has helped me reset it before hittingF8 and go through a process... Please answer

  • Get an error trying to update.

    to fffffffe of error when you try to install an update of window security.