Should I disable RAID 0?

I need some advice on what to do with my current system. I use CS4 Prod Prem for editing HD, AVCHD, SD, etc... Here's the question-

I bought a model tailor-made with -.

Antec 902 Mid Tower ATX case

750 watt Corsair power supply w / 140mm fan

2-120mm fans

ASUS P6T motherboard

Core i7 920 CPU

Kingston V Series SSD 128 GB drive (for Win 7 + the app)

2 WD Caviar Black 1 TB

12 GB of RAM (mushkin 4gbx3)

nVidia Quadro FX 1800 + elemental Accelerator

+

I have 4 external USB drives and Firewire 800 attached so player. (Unfortunately they are "mostly" maxed out, but I can always defragment).

I had initially asked the 2 WD Caviar must be set to RAID 0, but after that I realized that I would have no redundancy I asked just to be put in place as a two-disc single. But they kept in RAID 0 . The RAID is controlled by the ASUS mobo. I think a RAID 3, for now... extended until 30 RAID will be my best option.

I know I have to get several HARD drives, but I need to know what would be my best option...

1 should I disable RAID 0 until I can get the HARD drives more so I will lose data? If so, how can I do so that... I need to re - install Win 7 correct?

2 or, should I just go ahead, get 2 drives more and go with another RAID (x)?

3. If I get a for RAID 3 RAID controller card, which is my less expensive/more reliable option? I don't think I can swing the Areca of today's high-end cards.

4 if I go 3 RAID and want to increase the RAID 30, should I run an external RAID Tower instead of internal drives?

5 If a disk fails, how long do I need to get the new drive in?

Lost, dazed and confused... Please help!

1 should I disable RAID 0 until I can get the HARD drives more so I will lose data? If so, how can I do so that... I need to re - install Win 7 correct?

Win 7 and your programs are on the SSD, so there is no need to re - install Win7. To disable the current raid0, you know how it was setup. This was done in the BIOS by using the ICHR10 or the Marvell chip or he was in the software under Windows? See the user guide in section 4.4 for instructions on how to exit the raid of individual disks.

2 or, should I just go ahead, get 2 drives more and go with another RAID (x)?

More 2 internals is always wise, because they are much faster than your USB external courses and are already quite complete. I'll make sure that you get the same model as your current WD Caviar Black. Also make sure that ACPI is disabled in the BIOS, as it can disrupt the reliable functioning of the caviar in a raid. BTW, I'll explain later, but consider getting 3 Caviars instead of 2.

3. If I get a for RAID 3 RAID controller card, which is my less expensive/more reliable option? I don't think I can swing the Areca of today's high-end cards.

AFAIK Areca is the only controller card to offer Raid3. Also remember that the purchase of Areca controller card is like buying a tripod head and Vinten or Sachtler fluid. Quite expensive, but they last a lifetime. Now, the Areca may not last a lifetime, but can definitely last two generations of PC.

4 if I go 3 RAID and want to increase the RAID 30, should I run an external RAID Tower instead of internal drives?

Not at all, if your case is big enough. For example in my case I currently have 2 BRD burners and 17 disks 3.5 ". If I want I can increase this to 2 BRD burners plus 21 3.5 "disks including 15 hot.

5 If a disk fails, how long do I need to get the new drive in?

As I said above, I suggest that you get 3 drives WD CB. You can then configure them in a volume raid5 disks 4 more 1 hot spare. The dilemma is that AFAIK neither the ICHR10 nor the Marvell supports hot-spare parts, you may need a controller Adaptec, nuts of arec or 3Ware for relief assistance. If you don't have the budget for a controller from Areca, then in the future, you may find that the most affordable Adaptec card 3Ware or even Hightpoint (or LSI) have no other use if the time has come for a raid3 card.

With a hot spare in a raid5 when a disk fails, you can take your time to get a new (to reduce security although until replacement). If a disk fails, you will have reduced performance for less than an hour, perhaps only for minutes, until it kicks in relief. You can easily take a week or even two weeks to get a replacement disc if you can live with the guarantee reduced by not having a hot spare available more.

With exchangeable cages hot, you gain easy access to all your disks, as for example the SuperMicro CSE-M35T, http://www.newegg.com/product/product.aspx?Item=N82E16817121405

I hope this helps.

Tags: Premiere

Similar Questions

  • Why the telemetry is enabled by default when the support page says it should be disabled in release builds?

    Page at https://www.mozilla.org/en-US/privacy/firefox/#telemetry says telemetry functionality should be disabled in release builds by default. I've just updated to 34.0.5 and it is activated. I know not if, in an earlier version is enabled and he kept the same State, but I never manually put it on.

    Hello itabirca, just to be sure: you look at the options > advanced > choosing data to check if the extension has been enabled?
    have you used a beta version of firefox or the testpilot addon in the past?

    https://wiki.Mozilla.org/telemetry/FAQ

  • iPad Pro 12.9 "sound button.  Where is he? Today just started using and should have disabled the sound.

    Where is the button main sound on iPad Pro 12.9 "? Just started using it today and should have disabled the sound by mistake and now I can't find where to turn it on.  All sounds are on in the settings section.

    The volume of the up/down buttons are on the right side of the iPad.

    http://help.Apple.com/iPad/9/

  • IP source routing should be disabled

    Hi team

    I need to disable the address IP source routing should be disabled on ucsmanager. can you please someone tell me where I can disable.

    If we disable may I know what is the impact that we will get.

    Thanks in advance

    Mohan

    Mohan,

    But there is no plan on FIs, NXOS routing data. Let me show you.

     bdsol-6296-01-B(nxos)# show ip route IP Route Table for VRF "default '*' denotes best ucast next-hop '**' denotes best mcast next-hop '[x/y]' denotes [preference/metric] bdsol-6296-01-B(nxos)# show ip route vrf management No IP Route Table for VRF "management" bdsol-6296-01-B(nxos)# sh run int mgmt 0 !Command: show running-config interface mgmt0 !Time: Fri Oct 16 11:02:50 2015 version 5.2(3)N2(2.23d) interface mgmt0 shutdown force ip address 10.48.43.82/25

    Hope that things cleared up.

    M.

  • Should I disable Adobe Indesign Jocelyne I upgrade Windows 8 to 10?

    Should I disable Adobe Indesign Jocelyne I upgrade Windows 8 to 10?

    I'd do it.  If the upgrade is to remove the software then definitely.  Whatever it is, disabling is harmless enough.

  • I use LR3 and is about to be upgraded to El Capitan.  What's going to happen? Should I disable LR before upgrade?

    I used LR3 on my MacBook Pro and getting ready to upgrade to El Capitan.  What will happen to my photos? Should I disable LR before the operating system upgrade?  What is the sweetest way for me to keep my intact photos?

    Yes, you simply to copy the backup on a dvd

    You can select a location to save the catalog from Lightroom > catalog settings

    ~ Assani

  • Disabling Raid in my Qosmio G20-127? !!

    Can someone help me how to disable the raid in my Qosmio G20-127
    Coz, I bought norton system works 2008 the Prime Minister, but I can not install the new 4.1 goback coz I have raid on my laptop
    & goback is important to me.
    Experts please I need your advice
    Thanks aloot

    Hello

    The RAID can be disabled in the BIOS!
    You must select the 3rd page of the BIOS, and then you will receive these options.

    How to enter the BIOS?
    Well, press ESC, then F1 immediately after that the laptop was turned on.

    But note; If you change the RAID option, you will lose all the data and the operating system must be installed again!
    For RAID details, see your user manual! You will find all the information necessary and important.

    Good bye

  • Windows installation disabled RAID 10

    I ordered my 8300 XPS from Dell with raided 2 500 GB drives running W7 Pro system.  This morning, I've upgraded to Windows 10.  The upgrade has transformed my readers of the system RAIDed 2 separate drives. (I guess I should be happy, that it always starts).   It seems that 1 disk is always a W7 system, and the other has installed W10.  Is it possible to reactivate the RAID?

    Yes, but it will delete the data on the disc you want. For example, if you want to put the RAID 10 drive to another in mirror, you will need to erase all the contents of the Windows 7 disc. If it were a disk that is managed by Windows, it would recognize two disks and install to the one you chose (or the default - usually the first disc - if you were not paying attention).

    You will need to do this in disk management.

  • When I uninstall CS4... should I disable the serial #?

    Got the new IMAC.

    CS4 migrated old IMAC on the new IMAC.

    Currently have CS4 and Photoshop CC on the new IMAC.

    Now that I have to Uninstall CS4 from the new computer.


    Question: should I also turn off the serial # before uninstalling CS4? Please notify.

    Hi billiek,

    Yes, I suggest to disable the Application before uninstalling he could reach the maximum number of computers allowed for installation.

    Kind regards

    Tanuj

  • Mob (HCM02) should be disabled in a DMZ?

    HCM02 in the guide recommends to disable the Explorer objects managed to an SSLF only, however, the script he recommended for a demilitarized zone. Any suggestions on the recommendation I should use for my DMZ?

    It seems that the recommendation of old for the DMZ has been changed in the last project - http://www.vmware.com/resources/techresources/10198

    I will need to update the script to reflect that for only SSLF checks only.

    Thank you

  • Should I disable the file vault before any downgrades...?

    Greetings...!

    I am running El Capitan 10.11.6 with File Vault active. I am considering upgrading to Sierra, once it is released, tomorrow. However, if it causes problems or I simply don't like it and want to downgrade disable file Vault before starting this procedure? If I demoted would probably downgrade to the Mavericks, that I much prefer it.

    Thanks in advance for any future assistance...

    You must back up before doing anything.

    Use Time Machine to back up or restore your Mac - Apple Support

    Any encryption will take many CPU cycles out of the system when they are active, I would delete it.

  • The Java plug-in 2 1.6.0.31 NPAPI should be disabled?

    I was updating my sites Google Blogger, and got a Firefox error message that says that the Java plug-in for NAPAPI 1.6.0.31 2 must be turned off, in my opinion and I have to restart Firefox. I decided to disconnect from my Blogger account before you deactivate the plugin, but when I did it, the Firefox error message was gone (that's why I'm not positive it's the plugin). I went to the Plugin Check page and and see that the plugin is 'informed '. Should I turn it off anyway?

    Hello, the java versions including 1.6.0_31 & upward has not must be blocked by firefox, I don't know why you got the notification in the first place (perhaps the block was put in place when he was still an outdated version of the plugin on your pc and the update of the plugin that happened immediately after).

    https://addons.Mozilla.org/Firefox/BL.../P85

  • Qosmio G30 - capacity of the HARD drive even after disable RAID

    Hi all

    I have a G30 with two hard drives, which were broadcast in RAID 1 configuration for a year now. For RAID 1, I activated the mirroring and everything worked perfectly.

    However, I'm now running out of space so I turned off mirroring using RAID console.
    My question is "why do I always see the same capacity of HARD drive when I go on my computer? I hope that there is a simple answer to this.

    Thank you for Uncle Bob.

    Can you see the drive in disk management?
    Perhaps the HARD drive is not enabled or needs to be formatted.

    And the BIOS recognizes the another HARD drive?

  • Office jet pro 8620: should I disable the printer without cartridge installed?

    I removed the original HP ink that was defective and took it back. Now I have the inkjet (Office jet pro 8620) without cartridges installed. The printer says not to disable so that it does not get damaged but I'll be away for a week and want to turn the printer off. I will cause damage if they do?

    Thank you. I guess I'll have to keep on like this for a week then. Too bad.

  • Foreign travel, that all should be disabled?

    I know that I should have it in airplane mode, is there something else that needs a checkbox to avoid all IP service fees? Thank you...

    Airplane mode should be good...  But, you can also check that Mobile Data, roaming, etc. are all off, so... "Just in case".

    Good trip!

    John

Maybe you are looking for

  • Postgres error - unable to complete the operation

    Server 5, running like a dog Profile Manager.  Ive used the "Proxy timeout" fix Apache posted on these forums who helped for awhile, but now (without changing anything) Profile Manager is back to crashing often. If I type sudo serveradmin beginning p

  • serial communication control! Help!

    Hello guys,. I am trying to acquire serial port data. I use FTDI serial - usb converter. I have attached the VI and capture example. It send CDD1 CDD3 CDD3 to device and device ADD1 ADD3 sending, then I send CDD3 and device begin to measure and send

  • Unable to re - activate windows vista after reinstall

    I reinstalled Windows Vista, but he says that the product key is in use. I phoned the correct number but they say that the validation key, which I quote is incorrect but it isn't. I don't know what I can do now if anyone can help please. The activati

  • Xbox 360 NAT issues?

    My XBOX 360 Live connection was working fine a few days ago.  Now, I can't join parties or cats.  I was told that this is a NAT problem.  No one knows how to fix?  I have a WRT54G.

  • Listening for keyboard shown

    What should I do to listen to changes in visibility of the keyboard? I can listen to for the keys but visibility cannot either I don't get thread/example. Thanks for the info, you can provide to help me.