Should I trash my beloved scanner?

Similar Questions

• Installation of the USB - no scanner detected by the software

  I bought Microtec USB scanner ScanMaker6100 but cannot begin to work with it:)

  Recognize the scanner as a Plug & Play device my PC and install it but the software can't find it.

  I tried to scan on another PC to check and it works so I have problem with my TOSHIBA A60?

  I had send my PC profile to support of Microtec and they suggest the following:
  "your installation of USB needs chipset driver. Currently, he works in "universal". Unmanned correct install cannot USB chipsets support entirely. Normally you have the computer driver MB CD when you buy the computer. »

  My USB controllers in Device Manager are installed like:
  Standard enhanced PCI to USB Host Controller
  Standard openHCD USB host controller
  In devices, I see they are ATI SB200 - USB Controller and ATI SB200 - USB 2.0 Controller.

  I really should reinstall / update my USB driver? How? Where can I get these drivers?

  [Edited by: admin July 16 05 12:34]

  Hello

  I don't think you need to install or update the USB drivers. If the scanner is properly installed and recognized there must be another problem. In my opinion, you should try to use the scanner with another program. As far as I know, you can also use Microsoft word and try to import image from a scanner. If Office is installed on your device, try to import something in the word document.

  Good bye

• Try to log back on IPAD, but the person who gave it to me a few years ago, decided to change the apple (ex-husband) ID so I should he trashy or is there a way that I can get

  Try opening a session back on IPAD 4, but the person who gave it to me a few years ago, decided to change the apple (ex-husband) ID, so should I trash or is there a way I can get in without using his information?

  Before you give, sell, or all the iDevices like Apple computer trading

  models, they must be separated with the owner of the user and the owner of the account IDs.

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  So if it had not been made, the original owner has to make.

  You may not can someone at Apple store; There may be

  other modes of action if the owner has died; only one

  Member of the family with legal authority, & documentation

  could do in special circumstances. The safety is part of

  a theft and deter identity. Sorry for the inconvenience.

  Good luck in this case!

• Using the scanner rather than generic software WIA support PES 9

  Updated PES 9 a couple of weeks. Already got PSE6.  With PSE6, with my Canon LiDE90 scanner, when I chose import on the file menu and import selected from a scanner, I gives me the option to use the WIA interface or software compatible WIA Canon Scan Gear which has more controls. With PSE9, the only option when I select the LiDE90 is to use the generic Windows WIA driver.

  I can, of course, to use the Canon scanner software apart from PSE9 and send the file to PSE9 for editing. That works very well, but what I don't like about the digitization of this way, is that a temporary file should be created by the scanner software which is saved immediately and then load that into PSE9.

  With PSE6 when to use Scan Canon material in PSE6, the scanned image has been loaded in PSE 6 as a new image without title. If I chose to delete the scanned image, that I edited rather than save the file, there is no temporary file has been saved on the disk at all. I much prefer this work sequence.

  SOOOO... How can I get the Canon Scan Gear software optionally via the PSE9 file - menu import? I tried to reinstall PSE9 and reloaded the scanning Canon driver, too. No luck so far. Why Adobe would have FEWER options with a software upgrade?

  Technical details: Toshiba laptop running Vista 32 bit with all updates.

  If you need the TWAIN driver from Adobe, you must move it in the optional plug-in folder are in the folder plugins ol ' ordinary, as explained in the linked higher tech doc in this thread.

• HP Officejet Pro 8000 Wireless printer: Always be streak on copies vertical white

  HP Officejet Pro 8000 Wireless printer: Still get a vertical white streak down the photos. I changed the yellow/black printhead. Only one aid note said I should try to clean the scanner glass. Where is the scanner glass, and how to do for her?

  Other options to get rid of the vertical line?  Thank you.

  Hello

  It sounds like a problem with the printer itself, because it is indeed a vertical GIS. A cartridge problem would cause a horizontal issue. You can tru is the cleaning of transport, stem from the metal bar that you see in the printer, and carefully clean the Strip transparant. This with a lot of attention that its rather delicate and if it breaks the device is ready for the trash.

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

• Almost every window in iTunes are blacked out. Only in a few cases, text is readable.

  There are (in Yosemite) I noticed that the basis of all the windows of my iTunes went black.  Only in the body of the summary pages section on safeguards is the text in a contrasting color. That and the view of songs from 'My music.'  Views of the album and individual playlists are readable in the main window (with grey text), but the background is always black. Anything either with a radio or checkbox button is a pure black.  So, essentially, iTunes is useless for anything but to listen who can I do with any device.

  This continued in my upgrade of the El Capitan, so I know it is something that has developed pain in my system.

  No idea what it is or how I can copy something again in the library to get my ability to do anything in iTunes back?  Or should I trash iTunes and make another installation, a new is not overridden by all that is wrong with the old?

  This only happens in iTunes?  Not in other applications like Mail or Safari?

  If it is only in iTunes, try to download the latest version of iTunes and install it again, from here

  https://www.Apple.com/iTunes/

  This problem affects the components of the application iTunes, not your iTunes library.  However, since there is something weird happens, it would be good to make a backup of your iTunes data.

• The Airport Extreme 2 to died (light orange) 5 years

  A few days ago my MacBook pro let me know he could ' t locate the time capsule and hand't stored in more than a week.  I checked the other computers in the House, I discovered that they were all not finding time capsule not more.  When I checked the device the light was green, and all machines were connected to the wifi signal that he died.  I unplugged the Airport Extreme and gave him a minute or two and it reconnected.  I never heard the spin drive up so I guess the hard drive should have failed a few weeks ago.  After power cycling the light remains orange solid, and wifi no longer works.  Airport utility will not find the device.

  My questions are:

  Why if the wifi work until it's the power to bike after the hard drive failed?  The fact that the wifi does not work now shows that I should just trash and get a new one?

  Should I just install a new hard drive, if so where can I get the disk image format?

  Thank you for reading this!

  Why if the wifi work until it's the power to bike after the hard drive failed?  The fact that the wifi does not work now shows that I should just trash and get a new one?

  It worked because the TC was functional, even if the hard drive was not... If you open airport utility you should have seen a hard drive error, but he might have ignored, so... in fact the main light must have been orange flashing not green.

  The TC is designed to test the hard drive when starting... If it fails the TC does not start.

  You will have an indicators of solid orange color which is hard drive failure.

  If you open the TC you can replace the drive. See https://www.ifixit.com/Device/Apple_Time_Capsule

  Should I just install a new hard drive, if so where can I get the disk image format?

  Once you install the disk simply go to the tab of disc airport utility and erase the drive... which will set it up properly.

  One thing to consider is the economy... a TC 5 years really may not be worth a repair... power supplies can also go wrong.

  If it's a Gen3 and when you open it is brand Delta power, then it might be interesting to replace the drive... a Gen4 usually also would be worthwhile. Disk 4 Gen is WD green... and he might have lost format rather that died... you could so be able to simply delete it.

  Tell me the A1xxx of the base model and I can help you understand what to do... I've fixed hundreds of them.

• Why my secondary monitor continues to disconnect when I use my lap top without him and try to activate again?

  I have a dell laptop and use it with a second larger screen (Radon9000) in my office. I use my computer at home without the second monitor, and when I returned to the office that the multiple monitor feature will not work - this started about two weeks ago and his do worse.  Used to be simple to use control panel / monitor / settings / click the icon of the 2nd monitor / enable / ok and he wouldcome right on - but now I can not even be activated using troubleshooting.

  Do not have the CD original monitor and computer advises I don't need driver for it - ideas all or should I trash the monitor and get a new one?

  I have a dell laptop and use it with a second larger screen (Radon9000) in my office. I use my computer at home without the second monitor, and when I returned to the office that the multiple monitor feature will not work - this started about two weeks ago and his do worse.  Used to be simple to use control panel / monitor / settings / click the icon of the 2nd monitor / enable / ok and he wouldcome right on - but now I can not even be activated using troubleshooting.

  Do not have the CD original monitor and computer advises I don't need driver for it - ideas all or should I trash the monitor and get a new one?

  (Small chance) could be the monitor.  If you think that it is the monitor - borrow from someone else for a bit, see if it works.

  I look for a new version of your video card for the laptop driver and get installed it.  First of all - Dell - based on the serial number.  Go ahead and update your motherboard chipset, network, etc while there.  If that isn't helpthen, you should go to the source - the real manufacturer of the video card chipset.  Intel likely, may be nVidia or AMD (ATI).  Get the latest software/drive here and installed complete.

• code error hp photosmart 3210 18a 0206 Oxc

  Ink system has no error: Oxc 18A 0206

  Thanks, that's a hard to find page. I need to have serviced it. At the price of $50.00 and maintenance, can I buy new Epson which I hope it will last more than a few years. This has been a good printer. It's a shame to trash. The scanner still works fine. I scanned a thousand slides of 35mm without problem, even though it took forever. :-)

• Error - "the CD key you entered is invalid" when trying to install the Windows XP computer.

  Original title: Windows XP CD Key can expire?

  My old machine with Windows XP installed should be trashed. I want to install Windows XP on a netbook Eee. The Win XP CD is a CR - ROM with the retail CD. It was given by my former neighbor who worked at Microsoft and purchased at a reduced price.

  Trying to install Windows XP, I had pop-up window "you entered the CD key is not valid. I installed Windows XP Home edition using this CD key several times on my old machine, to clean the operating system after a certain period of malware infection. The CD key is certainly valid.

  So what's happening? The CD key can expire after a certain number of years? Note that what's happening during the initial installation - before the first logon. There is no internet connection. So it is not possible for the installation check if this CD key is used elsewhere.

  I tried several times. Whenever I got this error in the installation step "installation of Windows.

  The message itself is that I quoted above "the CD key you have entered is not valid.

  These are the typical reasons, you would get such a message:

  1. the user enters in the key not associated with the retail disk but another key, usually on top of the COST of the PC sticker.

  2. at least one of the characters has been entered incorrectly. This could be because of user error or a faulty keyboard.

  Just to be sure: you use a real retail CD? Or is it a generic OEM CD that was bought in a store?

  A way around this problem is to use an XP SP3 integrated in a installation CD. If your CD is SP2 or earlier, you can create one on the scale of SP3, using a process called "slipstreaming". Then everything just when it's time to enter your product key, don't! Then you will see this window:

  http://ethertubes.com/wp-content/uploads/WinXPSP3-2.PNG

  You will have 30 days to activate (and enter the product key). This page should help:

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key

• Inbox folders Windows Mail containing stored messages have disappeared

  I received the alert message - "the message store was damaged by an external application in Windows Mail." - can someone help me please restore Inbox folders

  Norton strikes again.  This is why we should never operate an email scanner.  Norton has developed a problem (who ALWAYS does) and ate your email.  How to get it back, it would be a question for the good folks at Symantec customer support.  If you can open these files backup and access to the. The EML files they originally contained, you can drag in Windows Mail folders to retrieve them.  In any case, you need to get rid of the Norton email scanner.  Uninstall Norton 360, download and run Symantec "Norton Removal Tool" to clean up all debris from the unistaller is unable to remove, and then reinstall Norton by using the custom installation choice where you choose do NOT install the enamel of crawl components.  Analysis of electronic mail is completely redundant, offers zero protection, delayed, and, as you can see, has a habit of creating considerable difficulties where none would otherwise exist.  You are fully protected against anything and everything available by e-mail you provided scanner file resident of keeep Norton update.  Symantec email scanners have proved be the largest source of unique disorder exists for Windows Mail.

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039
  Download and run the Norton removal tool

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• OfficeJet Pro L7580 will not hold settings network by hand... not visible on the network

  Yes... Once again... Another question about the famous OfficeJet Pro L7580 all in one.

  I can't write all the IP settings and get the machine to save.  No matter how many times I try, it's always defaults to "automatic" and when I print the network settings page I get all the relevant numbers as 0.0.0.0.  I tried the network diagnostic tool, I have read all the instructions, I am a network expert.  I searched this problem on Google and all I see is to throw this thing in the trash.

  I also downloaded the official patch from HP for Windows 7 64 bit network, but when I try to run this fix, it is said that the patch is not provided for Windows 7.

  Should I trash this thing or is there a fix. ?

  Thank you

  Thank you

• Test HP PCS 1510 page

  Why my HP PCS 1510 aio always print a test page whenever it is turned on?

  The page you see is an alignment page.  It allows to print after you have inserted a new cartridge until the alignment is complete.  To complete alignment, the page should be placed on the scanner glass and press the button of scan (within a short time of printing).  Check your manual for more information.

• Updates Windows 7 - stuck on 'check updates'...

  I have a HP desktop computer.  Running Windows 7 Home Premium.  Recently upgraded to the 10 Windows (while it was free).  Discovered that even after the analysis of compatibility says 'OK' I had to call Microsoft for more help and told me that my computer was not compatible.  Asked why the analysis said it was.  No real answer not followed.  Little has been said to restore to Windows 7.  After that I have known issues.  Before the update of window 10, this computer has been running great!

  in any case, I noticed recently that my computer is not updated.  When I go on ' check for updates ', it just stays on that.  The status bar does not move, but just on the 'check updates' for days.  The only way to stop it is to restart the computer.  But I know there are updates because my other computer is up-to-date (did not upgrade Windows 10 - but is currently running Windows 7).  So, I have sen the videos and articles on remove and clean up the folder "Software Distribution".  I did it several times and it DOESN'T WORK.  At one point, I decided to do a factory restore.  Took the computer to update 1.  At ran Windows Update and found 16 available updates and other things to seem to be good.  But noticed once the "Service Pack 1" has been downloaded and installed the Windows Update is blocked again.  So, I'm lost here.  What can I do?  Is there a solution?  Or should I trash this computer and buy a MAC?  Questions please ask.

  Help, please... Thank you!

  See this thread and perform the steps exactly.  I did the following steps on several computers and they work.

  Windows Update solution