Shutdown of the alternating sequence

Similar Questions

• the song sequence

  Hello

  Since this update for a given title, 'CD', song or 'track' selection is no longer moves in the regular sequence, i.e.track 1 to 2 to 3 and so on. The automatic progression is random, going to randomly say 1 to 3 to 5 or 1 to 7 or 9 or 8, then sometimes back to 1, even skip a track in a title to another title, then another title. In other words totally unmanageable, without the possibility to fill in a piece of music, for example a symphony or other.

  Is there a solution to this, any ideas?

  Thank you.

  Hi Roedael,

  I understand that iTunes seems to be unexpectedly scramble the order of albums when you try to play the songs on the album in order. In 12.5 iTunes the shuffle button appears at the top in the center of the iTunes window.

  
  

  
  

  • Turn shuffle or disable: Click the shuffle button.

  Shuffle is on when a grayed out box appears.

  • Shuffle albums or groupings: Choose commands > Shuffle > Albums (or groupings). iTunes plays the songs in the order in which they appear on the album or group, and then selects another album or grouping at random.

  • Shuffle the songs in an album: Click Shuffle below the album cover.

  Help - play iTunes songs
  https://help.Apple.com/iTunes/Mac/12.5/index.html?localePath=en.lproj#/itns2989

  Alternatively, you can access the settings of shuffle in the command menu > shuffle.

  Concerning

• Compaq presario cq61: change the boot sequence

  I have 10 Windows upgrade on my compaq Presario cq61 free. I want to do a clean install of Windows 10. I downloaded the tool of Microsoft Media, made a key USB and DVD containing the clean install. I am told that the use of the flash player, I have to change the boot sequence in the bios. I tried everything from ESC, all numbers F and LED to try to enter the bios and all have failed. Told me that all I had to do with the DVD was just put it in and start the computer and the laptop would boot from the DVD and I could make my own installation from there. Which also failed. The only thing I have not tried is downgrade to Windows 7, affecting Windows 7 back to factory settings, then reinstall the free update of Windows 10. I would not have to go through all if I mostly because I bought the laptop from a friend and it was installed at the factory of Windows 7 and I don't got no disc software to the computer so I don't want to screw up and drop windows 7 without the appropriate software reinstall to match the product key.

  Any help to enter in the bios or advice that could help me reach my goal would be greatly appreciated.

  Hello

  Here are some other suggestions.

  1. start the machine in Windows 10.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close any open windows and stop the laptop by right clicking on the icon from the Start Menu, then select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Tap on the ESC key as soon as you turn it on and see if it will now access the Start Menu.

  2 try to connect a keyboard external usb and see if this will allow you to access the Start Menu.

  Kind regards

  DP - K

• How to use the new sequence when it is reached its maxvalue in PL SQL code

  Hello
  
  Currently, I am the filling of a number of unique product in a table column by using a call sequence to generate the new number. For different products, I have different sequences and in my PL SQL code usiing IF... Else block I fill the serial number for different products. For a sequence more selling product, we reach a Max value in the production in one month and ensure that the application continues to run properly for the different end-users without getting any error on their screens, I want my code to automatically switch to the new sequence. I just need to add another if condition but my problem is how to find precisely when the maximum value is reached in old sequence.
  
  As the call to the old sequence can occur in different sessions he could be inconsistency and can be found in the error. My new sequence value must begin with AV1000. Please suggest.
  
  My old sequence look like this:
  SEQUENCE of Prd
  INCREMENT BY 1
  START BY AS1000
  MAXVALUE AS9999
  MINVALUE AS1000
  NOCYCLE CYCLE
  CACHE 2
  Order Yes;
  
  Published by: user11695088 on July 15, 2009 12:14 AM

  Catch the exception and use your new sequence. But somehow, I'm not like your alternative approach.

  SQL> set line 300
  SQL> set pages 50000
  SQL> set serveroutput on
  SQL> create sequence testing_seq increment by 1 start with 1 maxvalue 3
    2  /
  
  Sequence created.
  
  SQL>
  SQL> create or replace procedure test_seq_proc(p_seq out number)
    2  is
    3  begin
    4     select testing_seq.nextval
    5     into p_seq
    6     from dual;
    7  --
    8     dbms_output.put_line(p_seq);
    9  --
   10  end;
   11  /
  
  Procedure created.
  
  SQL> declare v_out number;
    2  begin
    3     test_seq_proc(v_out);
    4  end;
    5  /
  1
  
  PL/SQL procedure successfully completed.
  
  SQL> /
  2
  
  PL/SQL procedure successfully completed.
  
  SQL> /
  3
  
  PL/SQL procedure successfully completed.
  
  SQL> /
  declare v_out number;
  *
  ERROR at line 1:
  ORA-08004: sequence TESTING_SEQ.NEXTVAL exceeds MAXVALUE and cannot be instantiated
  ORA-06512: at "ETL_ADMIN.TEST_SEQ_PROC", line 4
  ORA-06512: at line 3
  
  SQL>
  

  See you soon
  Sarma.

• How to choose the alternative address for email?

  I have in my address book for recipients who have more than one e-mail address. I want to be able to choose the second address. For the moment, I can't work out how to do this automatically.

  Click "address book".
  Select the address book that contains the contacts
  Select the contact
  Info is displayed in the lower list below
  Double-click the alternative e-mail address.
  It is opened in a new write a message to this e-mail address.

• In a sequence of CTF, is it possible to obtain a text file of sequence clips display? There is a display of text file for clips (cmd-9). Zoom the timeline cancels the ability to see the whole sequence of the time line.

  In a sequence of CTF, is it possible to obtain a text file of clips in sequences display (name and duration)? There is a display of text file for clips (cmd-9). Zoom the timeline makes this visible annotation for shorts, cancels but the ability to see the whole sequence of the time line. Of course, it would help my editing.

  TIA

  In Final Cut Pro 7, you can use editing > find command to search on used clips in the sequence. See if there is an equivalent command in FCE. Unfortunately, I can't determine that at first hand on my system. (In addition, if you are still interested whereas FCP X, there the so-called Timeline index which provides quick access to a list of markers, clips, effects, etc..)

  Good luck.

  Russ

• HP Pavilion Notebook 15-n007ax: the alternatives of Ralink WiFi Bluetooth RT3290 combo for HP Pavilion 15-n007ax

  Hello HP support.

  Kindly help.

  My laptop is still under warranty.

  I just want an alternative WiFi & Bluetooth card installed on my laptop. I'll pay for the spare card offered.

  Already visited local HP service center, but the team was not useful enough able to check the list of possible alternatives for this laptop cards.

  Please help by listing the alternative maps I can have to make me check that useful with linux.

  Thank you and best regards

  Jean Claude Singh

  Hello:

  Here is the link to the service manual for your PC.

  Chapter 3 lists the cards supported wireless.

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & docname = c03918427 & lc = in & product = 5440102 &

  The only alternative support for you is Mediatek card that isn't better than the card Ralink because they are the same company and probably use the same bluetooth radios.

  It seems that HP has deleted from the white list of BIOS that allows to lock the cards not supported wireless.

  Since your model has AMD hardware, an Intel wireless card will probably not work, but I think you should be able to install a single-band Broadcom (2.4 GHz only) or double band 2.4 GHz/5.0 GHz) wireless with bluetooth on your template card and it should work perfectly.

• My iMac will be either reboot or shutdown of the apple desktop icon

  My iMac will be either reboot or shutdown of the apple on the desktop icon. Items saved on the desktop disappear and the menu from the top of the screen disappears, then it is just in this mode for ever more. I then use the switch to stop, which is clearly not the best way to ensure the longtivity of my system.  I use El Capitan 10.11.3 [latest version] I have tried the following but still the same issue.

  1. I ran disk utility, but no hard drive errors appear.
  2. I stop after having disconnected all my other connections (USB components, components lightning etc.), but still no change.

  Before you contact Apple directly, just wondering if anyone else out there he has a similar problem. I had my hard drive 3 TB replaced a few months back, in line with a reminder official apple and this problem started to reign around one month or later.

  See you soon

  Reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  Reset the NVRAM

  How to reset the NVRAM on your Mac - Apple Support

  If it is still not restart or shut down properly

  Try safe mode if your Mac does not end commissioning - Apple Support

  This is not, reinstall OS X from recovery

  How to reinstall OS X on your Mac - Apple Support

  If this is not the case, contact your Apple Store, the FSAA or Apple's Support.

  http://www.Apple.com/support/contact/

• Satellite P305D - different error during the startup sequence

  Hi I have a constant problem I have no idea how fix it. I have Windows Vista Home premium loaded and it works very well when it is running. I can restart the laptop several times and it starts perfectly, if I turn it off for an hour or two and go to start it always happens with a different error during the startup sequence. Most of the time I just go to start Windows normally and it loads, other times I have to go to the ERD.

  I uninstalled Vista and wipe the system well before reloading (using another drive) and the same thing happens. Would it be more likely to be hardware related? I know the battery charges well and I ran all the tools that Vista has to check the hard drive, so I don't know where to go next.

  Any help would be appreciated.

  Terry

  Hello

  Can you please post what errors you get during the boot process?

  In my opinion it could be a hardware problem, because you have already tried to reinstall Vista, so I doubt that the error is software related.
  Strange, but it might be a problem of RAM or HARD disk. The two parties, you can test it with Memtest86 and Drive Fitness Test. Google is your friend to find these two tools.

  In the worst cases, you must go to an authorized service provider. Technicians can check the entire notebook.

• Satellite P10 PSP10E shutdown and the light stays on

  Hello

  I'm having some problems with my old man (2004) Satellite P10 PSP10E-0SCM7-FR

  One day he simply closed (as if power, no BSOD) and the power and the led for WIFI and the CD/DVD button remains lit.

  Most of the time I can't activate it under as the power button is still on. (Power button, WIFI, and CD/DVD are on).

  I tried to remove the battery and unplug the computer for at least 30mm
  I tried to press the Start button for a period of time (one minute) then disconnect everyting (battery and power cord) at least 30 minutes before to turn it back on
  I have reinitialzed the computer using history CD provided with the computer
  I removed the radiator cleaned as well as the fan and then replace a new thermal grease
  I changed the memory

  Yet I still have the same problem, for some reason, the computer simply shutdown and the light stays on. Occasionally, the power light start, and I am able to restart the computer. But I'm unable to understand what makes the computer is shut down, or when that happens, what makes the power light turns off and make it possible to start the computer again.

  No idea what's going on?
  The Start button / stop and led market would be an error message?
  If so, what that means?

  Any help is very appreciated. Thank you!

  Damien

  lighting even when taking the battery and unpliging for a while (30mm in an hour)

  Hello

  Usually, books closed due to the high temperature and in this case, the unit must be disassembled and cleaned professionally, but it seems that you already have what I read in your post above.

  Probably its a motherboard problem.
  The RAM modules appear to be checked and is not RAM issue.
  So problem mobo is possible

• Checking the status of the main sequence in reminder PostUUT

  I'm checking the State of the main sequence in the PostUUT callback, running TS 2014 SP1.
  Say, the main sequence generates an error. PostUUT I check and get the following

  Parameters.Result.Status "error".
  Parameters.Result.Error.Code

  Parameters.Result.Error.Msg

  Parameters.Result.Error.Occurred False

  Parameters.Result.Error.Occurred should not be set to True? If this isn't the case, please explain why.

  Thank you.

  In the process model of the step that calls the MainSequence reminder is set to ignore errors.  It is for the rest of your group of main step can run.  That is why we only sets result false but retains all the error information.

  If it were me, I would trigger on the State channel.

  Hope this helps,

• Go to the list of the results of the main sequence in my plugin...

  Hi guys,.

  OK, first post here, but I'm a little stuck. I am writing a plugin model to generate a custom HTML report (my requirement has a very specific layout for the report, which is not at all compatible with the html reports generated by teststand normally). Anyway. I generated all labview code, I want to make the report in the format I need, but I'm really bad at actually get information of teststand in a way that is easier.

  What I want to do is browse through the list of the results of the main sequence in the callback sequence DUT-Done of the sequence of pluging, which is stored in

  Parameters.MainSequenceResult.TS.SequenceCall.ResultList according to the documentation, but how can I really access it as a table I can go? All I have in my list of parameter is a reference to the parameters. MainSequenceResult, and for the life of me I can't work out what to call this knowledge actually just get it into a format that I can then use to browse in a loop "foreach" to get out of these settings.

  I'm on a windows machine and teststand 2014 7.

  Any help you could give would be really appreciated!

  J

  The list of top level result is: Parameters.MainSequenceResult.TS.SequenceCall.ResultList

  To find it, I dragged Parameters.MainSequenceResult in the Watch window to a breakpoint and developed it until I found the list of results.

  The ResultList is a PropertyObject which is an array of containers, so as the methods GetPropertyObjectByOffset and GetNumElements are going to work on that.

• To input analog shutdown when the analog output is completed and synchronization

  Hello

  I'm trying to get my LabVIEW program to send analog output to a computer and read acceleration using the cDAQ-9184. Chassis output that I use is the NI 9263 and the chassis of entry is the NI 9234. I generate a signal of white noise using LabVIEW Express signal generator.

  The first problem I have is the synchronization. I had an old VI that has begun to measure the acceleration just about a second after the entry has been given to the machine. I used the LabVIEW tutorial on how to sync the analog input and output, only to discover that it does not work with two different hunts. Then I found another tutorial that shows how to synchronize different frames between them.

  The second problem is the cessation of the LabVIEW program. What I want to do is to generate the signal and then simultaneously send and read the input and output analog, respectively. It is because I don't want a phase difference or any shorter signal for a direct comparison. But as soon as the signal is sent to the machine, I want the entry to stop analog playback and then then the LabVIEW program must stop. I want to be able to choose any length of signal to be generated and stop as soon as the entire duration of the signal has been sent to the machine.

  I tried 'DAQmx stop', "DAQmx Timer" and 'DAQmx's task made?' and none of them have worked for me. It is also my first time on a forum posting, so I hope I gave enough information. I enclose my VI as well. The VI shows I read an entry for the analog input voltage, but I am only using this to try to get to the work programme.

  I'd appreciate any help I could get.

  Thanks in advance

  Peter

  Hi Peter,.

  I have some recommendations for you that I think you will get closer to your solution. First of all, I assumed you meant that you had 1 chassis (cDAQ-9184) who had two modules in it (NOR-9263 and NOR-9234). My next steps are based on this assumption, so if it's wrong, please let me know.

  For your first question about the synchronization, the code you provided is very close to what you need. You need to do, however, implement architecture master/slave for startup tasks DAQmx functions. To do this, you can add another frame to the flat sequence structure and put the master start task (input voltage) after the start slave (output voltage) task.

  To manage your second question and that the program ends at the point where you, the first step is to get rid of all the logic that you use with the local variable of length of time. Rather than use this logic, just wire the node "task performed?" of "is task performed?" operate to stop the loop. This will cause your loop to stop as soon as the signal is sent to the machine.

  I have some other recommendations for you that will increase the performance of your program:

  (1) rather than writing on file inside the last loop, you can use the DAQmx Configure Logging (PDM) .vi. You will place this VI between DAQmx Timing.vi and DAQmx Start Task.vi to the task of the analog input voltage.

  (2) after the last while loop, you want to stop the task and analog outputs as well with another DAQmx stop Task.vi.

  (3) rather than using a local variable for the entrance of displacement and wiring it in the DAQmx Write.vi, you can wire directly from the output waveform of the wave to build function node.

  That should help you get started in the synchronization of these tasks.

  -Alex C.

  Technical sales engineer

  National Instruments

• Transfer data from DoPreUUT to the main sequence

  Hi all, I am working on editing a sequential model existing in NI TestStand.

  In PreUUT do that I just wanted to have mu, own VI Custom which will require a path and once the path is selected, the VI will extract 2D Array of string values that I have to move my hand Sequence.I am facing a question of transfer data from table 2D-doPreUUT to mu from the main sequence.

  http://forums.NI.com/T5/NI-TestStand/pass-parameters-from-PreUUT-to-main-SEQ/m-p/2850684#

  who says the best way is to use the globals file, but I'm not able to get my values transferred to my main sequence.

  Need help to solve...

  Thanks in advance

  If you are adding a FileGlobal to Test DUT and expecting to access this variable in your file of the client's sequence, you will not be able to read the FileGlobal directly. You will need to use the "RunState.Root.FileGlobals" string... »

  for example if you have an array of strings FileGlobals.MyDataPaths you MainSequence, you can access using RunState.Root.FileGlobals.MyDataPaths of MyDataPaths.

  Remember that this will only be available when you use the process model, therefore, it would be wise to test that you run with the process template.

  Hope this helps

• Note the serial number of the UUT in the main sequence

  Hello

  I want to write the serial number of the object to be measured on the main sequence.

  I know that I can access this value through RunState.Root.Locals.UUT.SerialNumber. I can write the serial number in this variable and it works as long as the report is not generated on the fly. If activate on the fly to have pointed out, my serial number of UUT report rest to 'NONE '.

  Is it possible to force the regeneration of the report with the last value of variables? I noticed that there's something similar for the runtime. During the execution of the sequence, on-the-fly feature enabled, the report indicates "0 seconds" for the period of performance. However, when execution is complete, this report field is updated with the actual value.

  How to do the same for the serial number?

  Thank you

  Alex

  OK, ATML seems to create the problem. Using XML reports, it works as expected. What is a work around for you?

  Norbert

  EDIT: Classified CAR 491296 against ATML OTF reporting