Signature on Outlook via laptop problem

Similar Questions

• connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  Best regards: John

  Hello

  -Do you have Bluetooth devices internal or external connected to the laptop?
  -Have you checked if all the Bluetooth drivers on two laptops are very well installed?
  -This work was fine before? If so, what are the hardware/software changes made on the computer before this problem started?
  -Is a problem only when these 2 laptops connecting or is that when you try to connect these 2 laptops at any other laptop too?

  I suggest you to go through these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this information helps you!

• Smartphones blackBerry with Outlook calendar sync problem

  I just got my first BB - the Pearl 8120.  I installed the Desktop Manager v4.6 on the web of BB on an XP tablet pc.  I set it to sync with my outlook 2003.  Synchronization has functioned well for contacts, however, when he started the sync of the calendar, he began by saying it was reading from MS Outlook Calendar and read through the items until he reaches 2096/13344.  It stalled for about 30-45 seconds and then started again until it reaches 4613.  He won again, but starts again.  6089 record, a message will appear that says "Intellisync - done in unexpected ways.  I press 'ok' and it is up to the Office Manager.  If I push sync once again, he stands up and says 'Intellisync - unknown error reported.  I have to close the desktop manager and reboot to have sync again.  I tried to synchronize only the notes, and it worked fine.  I also sync had the tasks without any problems.  However, whenever I try to sync the calendar, it bombards.

  I tried to see if there's a suspicious calendar entry in outlook, but I can't find which entry is attack on (just the number - references in the journal seem not to be in a specific order).

  I disabled my anti-virus and have had the same chance.

  I also went in the section advanced backup and restore to remove the database (site Web BB technical support recommendation), but there is no database that is listed for the computer databases.

  I have been using Palm hotsync to synchronize with my palm.  Active sync is also installed on my system.

  Any ideas?

  OK I think I found a solution.  AT & T directed me to a BB KB01451 document that shows you how to enable an improved ability of logging.  Of course, I had a few records in my Outlook database where the date codes have been corrupted for an unknown reason.  I followed the instructions to enable logging.  Then, perform a synchronization.  After you get the error message, look in the tif.log using Notepad and scroll to the bottom of the document.  In the first lines, you will see the subject line.  Go to Outlook calendar and go to the advanced search.  Type in the subject line, and have the appearance of looking for the title of the topic.  If you have more than one entry with the same name, you can probably find the specific record with a location or other mark of identification.  If this isn't the case, you must process all the records you have found.  I've done the folder - each damaged record had a defined reoccurance.  I went to the tab under Tools reoccurance.  I selected ok and acknowledged the warning that it would give me changes to certain events may be changed.  Then, I saved the appointment.  Then, I went to the directory of newspapers and renamed newspapers.  You can also simply delete them if you don't want to keep track of them.  Furthermore, you probably need to close the Desktop Manager and Outlook between errors - you may need to close outlook via the Task Manager, as he is suspended because of the error.  Just continue the process until you find all the records that have been corrupted - I got 6 in my reviews 13 k file.  I have no idea why this was happening - the recordings were of many years ago to a few weeks ago... not a good sign!  My Palm did not seem to be a problem with these records, so I don't know why they have a problem with the BB... but I am running after several hours of messing around with this - I hope that it will help someone else.

• How can I add a keyboard shortcut to insert a signature in Outlook Express?

  ACCESS KEY QUICK TO ADD A SIGNATURE ALREADY WRITTEN IN E-MAIL WHEN YOU WORK WITH OUTLOOK EXPRESS

  ACCESS KEY QUICK TO ADD A SIGNATURE ALREADY WRITTEN IN E-MAIL WHEN YOU WORK WITH OUTLOOK EXPRESS

  Hello

  You can configure Outlook Express to add a signature automatically.

  How to create a Signature in Outlook Express
  http://email.about.com/od/outlookexpresstips/SS/w112703.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I can't send email Outlook Express (sudden problem). It is a new and sudden issue. Error number: 0x800CCC67

  Original title: I can't send email Outlook Express (sudden problem). It is a new and sudden issue.

  I use Outlook Express 6 and make this message. An unknown error has occurred. "Account: 'XTRA', server: 'smtp.xtra.co.nz', Protocol: SMTP, server response: ' 421 mta01.xtra.co.nz connection refused [222.155.136.138] ', Port: 25, secure (SSL): no, Server error: 421, error number: 0x800CCC67.

  Continues to receive e-mails.

  Hello

  Have you made changes on the computer before this problem?

  The following article might be useful.

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
  http://support.Microsoft.com/kb/813514

• My computer laptop problem every time I open it stops about one hour automatically

  My laptop problem everytime I open fb or youtube time stops automatically, take him to a technician he already change the thermal paste, heat is normal fun to work correctly, we observed 2 hours after putting thermal paste all okey, so I try to open youtube and another browser, subject, and time my laptop again automatically shutdown , is someone with experience already this kind of problem, please share it to me so that I should know what will be I make, I'm looking forward to the help, thank you advanced...

  Hey chichi,.

  There are 2 reasons why this might occur on the computer.

  1. your computer is overheating.

  2. the version of Windows installed on the computer is a BETA version or Windows is not activated.

  Provide us with the following details.

  1. the version of Windows installed on the computer? http://Windows.Microsoft.com/en-in/Windows7/find-out-32-or-64-bit

  2. the full report of the MGADiag tool.

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Run the tool. Click on the button continue, which will produce the report.

  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.

  3 check the latest event followed in Event Viewer before the computer shutsdown.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

  Browse the Windows logs, Application events (program) and check if there is no error and the last event that was followed before the computer shutsdown.

  Check the options (Settings) of power that are currently in use on the computer. Also, remember to change the power plan and check.

  http://Windows.Microsoft.com/en-in/Windows7/products/features/power-management

  Provide this information so that we can investigate the matter.

• BlackBerry Bold 9000 - synchronization with Outlook via bluetooth smartphone

  Just baught Bold 9000 of T - Mobile Germany. Firmware is real. As BlackBerry Desktop Manager. Using the USB cable that everything is ok, synchronization with Outlook 2003 on XP platform works well. There is no way to sync via bluetooth. In the office under options Manager - connection options bluetooth buttons are grayed out and cannot be used for this purpose. When I try to connect via the bluetooth menu in XP I can't install the Active Sync application. It is shown, but I can not activate.

  What is lacking or what I'm doing wrong.

  Information for everyone:

  -l' exchange of data via bluetooth is possible and works perfectly

  -the key to success is the correct bluetooth adapter

  -l' my Samsung laptop with the Broadcom software bluetooth adapter did not work

  -install my old Sitecom USB adapter worked immediately and perfect

  no more problems with the Desktop Manager =>

  Thanks for your comments

• Slow performance HP Pavilion laptop problems

  Very recently, I bought a laptop HP Pavilion. It has Windows 8 and arrived in the mail, no more than a week ago. The first thing I did after that the mandatory installation process was to restore the files from my old laptop (which broke) via ClickFree (currently I have 625 677 GB free) and once that was completed, I installed several programs (office, Vipre, Photoshop, etc.). Apart from that, I did very little about the real hard disk of the computer, since I save everything externally on my ClickFree.

  My problems started occurring rather suddenly, Wednesday morning. In Firefox, I opened a tab for go on Facebook, and scroll the RSS seemed pretty gloomy. I closed the tab, but the slow pace continued in the other tabs, I had opened and then spread to the programs not involving is not the Internet. These problems have worsened gradually.

  On the Internet, the performance is particularly slow. I gave up video players like Netflix, because they freeze the browser to the point of crashing. Page loading is very delayed, even typing this message experiences freeze, despite the fact that I have nothing else running in the browser. There is warning of frequent messages in scripts and plugins does not (although, ironically, these messages are often unresponsive until I finish the script or the offending plugin). It is difficult to do anything on the Internet, such as the loading of pages and tabs of switching may take several minutes. Just clicking can cause the browser to freeze for minutes at a time.

  Off the Internet, programs load extremely slowly, often freezing. Opening files sometimes, with an increase in frequency, translates into a green loading bar at the top of the screen. Sometimes this bar gets stuck and cannot finish, and I can't access the contents of the file; This happened when I tried to open the Panel, to get more specific information about the computer to include in this message. Sometimes programs, such as video players, open without actually playing the video file, or they open at all. Often these programs freeze and sometimes hang; the desktop and the Explorer bar at the bottom of the screen (with the start menu, etc.) are not likely to freeze or disappear, for varying degrees of time. When I came to the computer, CPU utilization averaged about 4-6%, but now he's averaging 40 to 60%.

  Start the computer became too long and hard. The last time that I restarted, I entered my password only to get a completely black screen for at least half an hour; My office and the icons have appeared when I pressed Ctrl-alt-delete. After that, I stopped to turn off the computer (it was not a long time ago). This morning, I opened the laptop to connect, but received only a "Please wait" while the computer has tried to load the login page. It took 10-15 minutes, and then I was finally able to enter my password.

  These issues are getting worse, and I'm sure I'm forgetting several, but I think that what I've included enough to illustrate my problem. This is a new laptop, but it works almost as bad as my old laptop, which became unusable recently and had to be replaced with this one. I can't imagine what is the cause, but I really wish she was fixed. I installed a program called Fix - It Utilities (the installation disk supplied with the notebook) to try to improve the performance of the laptop, but to no avail. Any help would be greatly appreciated.

  Hello ValentineKills. I understand that the computer is slow. I will do my best to help you!

  This can be caused by a hardware failure or a software/driver/virus conflict. However, we won't know until the diagnosis is made.

  I'll provide a few official documents that provide information on how to speed up the computer. I want that you follow all the steps in all documents. In this way, if the problem exists, it will restrict the root cause. Here are the documents that I want you to try:

  http://support.Microsoft.com/kb/2746761

  http://support.HP.com/us-en/document/c03460887

  Since you're under Windows 8, I have a further suggestion: complete all updates to Windows, and then upgrade the computer to Windows 8.1. While the operating system is upgraded, try to use the computer and see if the speed is any different.

  Please reply when you have finished troubleshooting. I'm only here to help!

  Mario

• Cannot make calls via laptop

  I can't make a call via Skype on laptop, but works well for the iphone (even Skype account for both devices).

  Every time I tried to make a call (after reinstall many times), it will close by saying "Skype has stopped working".

  And the message in the box said "a problem caused blocking the program works correctly. Windows program and you warn if a solution is not available"(but the solution will never come).

  Note that I use Windows 8.1 and I already set the compatibility mode...

  Update your Intel video display driver compatible Windows 8.1 version. The currently installed version (9.18.10.3234) is designed for Windows 8.

  http://www.Dell.com/support/home/us/en/19/product-support/product/Vostro-5470/drivers

  Be sure to select the option Windows 8.1.

  Also look at the other driver available for your laptop updates.

• Palm TX: Outlook via Microsoft Exchange synchronization, but no data is transferred

  Dear Group

  I'm not a beginner. I am very computer and hardware gadget and intuitive software. My PalmTX syncs, but there is no data transferred. Previously, Sync worked well on Outlook 2003, 2007 and 2013. However, I started having problems with the transfer of data after synchronization when I lowered the score of 2013 Office to Office 2010. I've demoted office 2013 because it was a big eater of resources on my computer. I stripped all the reminants of office 2013 (including the reminants registry) before you install Office 2010 to ensure that there is no possibility of confusion for the Palm TX. I tried freezing and reinstall several times. Note, every time that I run this process, I uninstalled the software/files Outlook and Palm/all software including any reminants of registry. When I reinstalled, I started with the Outlook2007 then the PalmDeskTopSetup6.2.2, then the PalmConduit2007. Also, I tried several new synchro and cleaned/disable-dusted cables connectors for synchronization on the Palm TX itself... with no success.

  I think the problem is that the conduit itself is not be trained. In Hotsync when I click Configure > change hotsync action > settings, I get an error message stating "Microsoft Outlook Conduit - an unknown error has occurred." Previously, this setting function would have text that would allow me to change how the conduit receives data (e.g. MS Exchange;) IMAP) I remember correctly - not 100% sure. If my suspicions are correct, one of the following values is corrupt: PalmDeskTopSetup6.2.2, PalmConduit2007 or MS Exchange. Given that I don't have a "fresh" copies of PalmDeskTopSetup6.2.2 and PalmConduit2007 because HP links no longer work, I ran a repair on my file of MS Exchange. It still has not fixed the problem. Note that whenever I have to uninstall/reinstall Outlook, I delete the MS Exchange and files all connected, as it recreates it from scratch when Outlook is reinstalled again. To be clear, does not preclude MS Exchange as the culprit because Microsoft adds a fix or security to every time something else change always 'breaks' :-).  I'm not sure what to do next. If anyone has had this problem or have any suggestions on what I could do to fix this? I really really need my at least my calendar of transferred to my Palm TX. Help, please. Thank you.

  My computer and the Palm TX is the following configuration:

  * Win7 x 64

  * In the course of running Outlook 2007 (downgraded from 2010 to 2013 because MS Office Products are resource hogs on my computer)

  * Email Sources: MS Exchange (work) and local ISP (home - email IMAP) - both accounts are running simultaneously

  * Synchronize via USB

  * Driver: Akeeba to Win x 64

  * Software installation of operating system Palm: HP - PalmDeskTop6.2.2 (contains HotSync Manager 7.0.2); HP PalmOutlook2007Condiut

  * Message from the outlook journal file:

  -Successfully synchronized outlook calendar

  • Duration: 1.1 seconds
  • Outlook calendar
  • OLERR: 0C-000F (0X8000FFFF)
  • OLERR: 0D-0003
  • OLERR: 0D-0001
  • Not synchronized

  Dear Group

  I solved my problem. I wanted to share with you the solution for those of you who maybe had a similar problem AND you have tried all the suggestions that have been posted since the Palm OS/WinMo Forum without success. My problem is that something that she prevented the pipeline connecting my Palm Outlook of training courses. The result was that my Palm computer / would synchronize but no data (entered calendar, tasks, etc.) won't be transferred. Before we get to what has worked for me, run through the following options before trying my fix:

  1. BACK UP YOUR FILES! BACK UP YOUR FILES! BACK UP YOUR FILES!
  2. Repair your outlook (pst or ost) files - microsoft has detailed instructions on how to do this with your version of Microsoft outlook. Uninstall and reinstall the Palm components (Installation and relevant lines for your outllook files). Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful...
  3. Delete your current outlook profile and create a new profile - microsoft has detailed instructions on how to do this with your version of Microsoft outlook. Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful...
  4. Completely uninstall outlook, which will include the deletion of the relevant registry entries and system files. I HIGHLY recommend that you DO NOT attempt to do it "manually" yourself unless you experience such changes on your computer. Incorrect changes to your registry files or computer system will completely shut down your computer and ultimately to lose all your data because of the methods that will be needed to fix your mistake. The good news for those of you who have no expertise in this area is that Microsoft has made a DIFFICULTY IT PATCH REMOVAL TOOL that will automatically run a complete unstall of outlook or office.  -microsoft has detailed instructions on how to do this with your version of Microsoft outlook. Uninstall and reinstall the Palm components (Installation and relevant lines for your outllook files). Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful...
  5. To ensure that your data are fully INDEXED. In your control panel, there must be a parameter called OPTIONS of INDEXING. If Indexing is not complete, follow instructions from Microsoft for your version of Windows to allow for the completion of indexing. Note that this will take time. You can do this night. Uninstall and reinstall the Palm components (Installation and relevant lines for your outllook files). Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful... Uninstall the components of Palm. Return to the OPTIONS of INDEXING and completely Strip and rebuild your index from scratch by pressing the Refresh button in your version of Windows. Note that this will take time, again you can do this night or weekend depending on how much stuff you have on your computer. When finished, reinstall the components of Palm, synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm. If this is not successful...
  6. Finally, what worked for me was creating a new WINDOWS PROFILE. I discovered thanks to make another system and software checks that I did not mention here that my WINDOWS PROFILE was damaged and it was what was causing the failure of training leads between my outlook and palm. How do you create a new windows profile will be different depending on your Version of the Windows operating system.  -microsoft has detailed instructions on how to do this with your version of Windows. Uninstall and then reinstall outlook. Uninstall and reinstall the Palm components (Installation and relevant lines for your outllook files). Synchronize your Palm/and check for content transfer (calendar, tasks, etc.) for your Palm.

  Good luck

  Concerning

• What is the best bluetooth device for listening to music via laptop

  Device

  What is the best feature of Bluetooth wireless to connect the laptop, if you want to listen to music on the speakers via the laptop?

  I try to use the Sony Ericsson HBH-DS220, but it did not work because the readers that are not available for download... Any help please because I like to play my music from my laptop to my wireless connected speaker
  .

  Hello

  It would be a good idea to work with your local computer store to be sure, everything is matched
  Working togther. Take the laptop computer and peripheral and match them the new device as needed.

  Maybe BlueSoleil can help - it's not free, so you should contact them for their recommendation
  as to suitability for your needs.

  BlueSoleil
  http://www.BlueSoleil.com/

  Bottom left - self-test Mobile tool and equipment check
  http://www.BlueSoleil.com/support/AssistantTool.aspx
  http://www.BlueSoleil.com/download/detail.aspx?TID=26

  ============================================================

  Troubleshooting methods:

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• No wireless internet via laptop

  Unable to connect to the internet via the Wireless Linksys router + laptop desktop computer. Model = WRT300N.

  Connection worked fine on my laptop before, however, stopped working about 3 days ago.

  Try to solve the problem of connection, I uninstall software linksys on my desk, now I can't run the setup

  due to the fact that I can't connect to the internet.

  Any help woul be appreciated.

  See you soon!

  BK

  When you wire your computer to the router are you able to go online? If Yes, then I think you need to change the settings of your router and then try to connect to your wireless network. Follow the settings below.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab

  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...

  Change the mode of WPA wireless security, encryption, select TKIP. Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and do not forget the key.

  NOTE: The password must be more than 8 characters...

  Click the settings advanced wireless
  Change the tag to 50 interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

  Now let's see if you can locate your wireless network and try to connect...

• When I open my external hard drive via laptop, windows Explorer restarts automatically.

  When I open my external hard drive via my laptop, windows Explorer restarts automatically. Why is it so? It opens perfectly well in other major tours. I use windows vista.

  Hello

  ·         You receive an error message when you restart the Explorer?

  Method 1:

  You can run a scan on the hard drive to check for errors and repair if there is no performance problem.

  Reference:

  Check a drive for errors

  Method 2:

  Attempts to start in the State of clean boot and check if the problem persists.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  You can also perform a check and scan SFC if it helps resolve the issue.

  Refer

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

• Win 7 update - printing wireless laptop problems

  I upgraded from Win Vista Home Premium to Win 7 Home Premium on my laptop.  I can connect is no longer on my wireless printer.  It is recognized, but is unable to print.  I have changed ports, I checked the Norton and Windows Firewall, I connected via USB, still is not printing.  I had added Norton 360 before I upgraded and printed correctly.  It's just after the upgrade to Windows 7, it is now a failure to print.  I have a Lexmark X 6650 printer.

  Hello Mary,.

  Thanks for posting your query on the Microsoft Community.

  I would be grateful, if you can provide us with the following information to help us better understand the question?

  • You get the error message / code error on your screen?

  I suggest you to follow the below methods and check.

  Method 1:
  Let flow the FixIt and check if it helps.

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the question did not resolve, try Method 2,

  Method 2:

  If Windows can't detect a printer that you want to use, follow these steps to find and add the printer manually:
   
  a. open devices and printers by clicking the Start button , and then on the Start menu, clicking on devices and printers.
  b. click on Add printer.
  c. in the Add Printer Wizard, select Add a network, wireless or Bluetooth printer.
  d. in the search for available printers page, click on the printer I want isn't listed.
  e. on the find a printer by name or TCP/IP address page, choose How to find the printer you want to use, based on the type or location of the printerand then click Next.
  f. complete the additional steps in the wizard, and then click Finish.

  To make sure that printers on the network are displayed, check if the network is working properly. For more information, see view the status of your network.

  If the problem persists try Method 3,

  Method 3: Perform the steps in the below article mentioned.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If the problem remains try Method 4,

  Method 4: update the drivers from the manufacturer the printer.

  Reference:

  Lexmark X 6650

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Make a call from Outlook via Smart call connector toolbar

  Hello

  I want to make a call from my Outlook contacts via the toolbar of the SCC. Or when I click directly on the number and I called, the call doesn't come out because it lacks the prefix of output. So I wanted to know if there was an option in the CSC pay "zapper" prefix, or if there was a way to remove the prefix via the CCA or en CLI.

  Thanks in advance

  Thomas

  Hi Thomas

  Trying to set out in 0: Control Panel > phone and modem to your computer.

  The EU I don't have time to test but I did a quick tour on the international community, and someone seems to have solved the problem like this.

  As soon as I get 5 minutes, I'll made my CPU and I'll do some tests drive the solution me also interested.

  @++