SignatureTool the corrupting cod file

Similar Questions

• How to download the app and extract the brother .cod files that it contained by program

  Hello

  I want to download and install a new version of my application programmatically.  I read the messages where all the .cod files application including .sibling .cod files are downloaded separately.  Is it possible to simply download the application file, for example Main.cod and extract all the brother .cod files contained (hand - 1.cod, hand - 2.cod)?

  Thank you

  Not sure that understand this issue.  Given that you have already unpacked all the brothers and sisters, then you know how at the server level and can provide information, your application can query.  Your application can read the jad file, or as the naming convention is well known, your application could try to get cod files with a suffix growing until it breaks.  Is that what you were asking?

• nilibddc dll: opening files tdms with the corrupt index files

  Hello

  I have a question about the error handling when using the nilibddc.dll.

  I want to use nilibddc.dll to open the .tdms file. At the time I experimented with some error cases and got stuck in a case:

  When I try to open a file with a corrupted file .tdms_index .tdms I get code error-6211 (DDC_StorageCouldNotBeOpened).

  The file .tdms_index is corrupted due to errors during the copy of the file.

  The problem I've noticed is that I have a lock on the corrupted file .tdms_index file after DDC_OpenFile (...) (I can rename it, but I can't delete the file!).

  As you can see in the code snippet - it is not really special...

  int ddcError = 0, length;
  
  DDCFileHandle	file = 0;
  
  ddcError = DDC_OpenFile (file_path, NULL, &file);)
  Here, I get ddcError is-6211
  
  If (ddcError == 0)
  
  {
  
    do something with the file...
  ddcError = DDC_CloseFile (leader);
  If (ddcError == 0)
  
    {
  
      < "no="" error="" -="" everything="" done"=""><>
  
    }
  
  }
  System ("pause");

  I miss something here? Should I use DDC_FreeMemory in somehow to free open handles?

  I also tried to use the DDC_OpenFileEx (...) with readOnly set to true. But that doesn't change anything!

  Thanks in advance for the help,

  Daniel

  You are right. The sample file you attached to your message causes an access violation. If no normal flow program and apllication in undefined state.

  I will direct the file to developers. I tried to generate a file that causes the same by beating some index files, but has failed to create one on my own. It happened to your site more than once?

  What can we do?

  In the first place, simply copy the PDM. The index file will be recreated when the file is accessed. What is lost when the index file is not copied, therefore the time required to create the index file by scanning once the PDM file.

  I hope this helps a little

  Andreas

• Question 1: Low virtual memory does that mean and how do I fix? Question 2: The corrupt system file that should not be removed. How do I correct?

  Question 1: what low virtual memory mean and how do I rectify.   I am invited this could change my access to some applications and the pc is very slow.

  Question 2: AVG pushes me that I have a corrupted system file, in a white space, I think, that should not be removed.  How do I rectify this?

  Uninstall AVG with tool for them to do it in safe mode.

  Reboot and install MSE.

  Without doubt, all problems solved. Let me know how it goes.

• The optional .cod files sign very well but do not have those required?

  I am really baffled by this one. I installed signing keys, and it seems that something is wrong. First I tried to sign my .cod in Eclipse. I copied the file sigtool.csk to there and it seemed to work for the signing of some of them, but it failed for a handful of .cod files. Either way, I see no details why those failed, or no matter what newspaper.

  Then I tried in the JDE and got similar results. Is there anything else I should do differently? I would have posted a screenshot, but it seems that you can not attach files that are not urls here.

  

  NVM, I created a fresh workspace for other reasons and I can sign correctly in Eclipse now.

• Generated JAD file lists the strange COD files

  I use BB JDE 6.0.0. and it generates a JAD file for the project. The problem is that it lists the COD files, which are not used. I pasted the contents of the JAD file below. COD generated file is AstralEffects.cod, but there is no file AstralEffects - 1.cod or AstralEffects - 2.cod.

  How can I remove these COD files are not used in the JAD file? I tried to remove them manually, but then I got ' 907 invalid COD: impossible to import the ZIP file. I'm trying to find a way to change the JAD of BB JDE 6.0.0 file, but I can't find an option like that. So, how can I change the generated JAD file?

  Manifest-Version: 1.0
  MIDlet-Version: 2.2
  MIDlet-Jar-Size: 171299
  RIM-COD-URL-2: AstralEffects - 2.cod
  Microedition-Configuration: CLDC-1. 1
  MIDlet-Jar-URL: AstralEffects.jar
  RIM-COD-Module-dependencies: net_rim_cldc
  RIM-COD-SHA1-2: ed 81 41 47 32 BA 7f b7 9 d 6a e6 78 83 e9 ff 71 83 11 a9
  RIM-COD-URL-1: AstralEffects - 1.cod
  RIM-COD-SHA1-1: 04 25 03 50 FF e8 4 b d6 63 77 12 d8 f1 7f 67 60 85 6 9th 2f d
  RIM-COD-size-2: 42088
  RIM-MIDlet-flags-1: 0
  RIM-COD-size-1: 48192
  RIM-COD-Module-name: AstralEffects
  MIDlet-name: AstralEffects
  RIM-COD-size: 71800
  RIM-COD-creation-Time: 1291403520
  MIDlet-1: AstralEffects, AstralEffects.png, AstralEffects
  RIM-COD-URL: AstralEffects.cod
  RIM-COD-SHA1: 31 34 46 79 8 7f c2 d 2B f7 19 98 c0 f6 bb 03 c3 2 df c 78 c0
  Microedition-profile: MIDP-2. 0
  MIDlet-vendor: mobile visuals

  Once you rename the original to the extension ZIP and unzip, ther original COD there not more, right? You should deploy all of the files that I unzipped from the aggragate COD.

• Attach a database without the corrupt log file

  Hello

  IM asking if it is possible that to fix one. MDF datafile without the. DFL

  I want that because I have a corrupt log file nd when I attach the database triggers the following error: -.

  -----------

  The log cannot be rebuilt because there were open transactions / users when the database has been arrested, no checkpoint occurred to the database, or the database was read-only. This error can occur if the transaction log file has been manually deleted or lost due to a hardware failure or the environment.

  --------------------

  I just need the data of this file that I need and I don't have the damaged log file

  I tried

  sp_attach_single_file_db "new_2009", "C:\Data\new_2009_Data.MDF".

  but the same error comes back.

  Note Please that I have no recent backup suggest to restore the database from backup

  Thank you

  One of the commands and restore types should help you, good luck...

  Restore the full backup WITH RECOVERY

  Note: as mentioned above this option is the default, but you can specify as follows.

  Command:

  RESTORE DATABASE AdventureWorks FROM DISK = 'C:\AdventureWorks.BAK '.

  WITH RECOVERY

  GO

  Recover a database that is in the State of 'restore '.

  Note: The following command will take a database that is in the State of 'restoration' and make it available to end users.

  Command:

  RESTORE DATABASE AdventureWorks WITH RECOVERY

  GO

  Restore multiple backups using WITH RECOVERY for the last backup

  Note: The first restoration uses the NORECOVERY option restores additional is possible.  The second command restores the transaction log and then brings the database online for the use of the end user.

  Command:

  RESTORE DATABASE AdventureWorks FROM DISK = 'C:\AdventureWorks.BAK '.

  WITH NORECOVERY

  GO

  RESTORE LOG AdventureWorks FROM DISK = 'C:\AdventureWorks.TRN. '

  WITH RECOVERY

  GO

  More information that you can dig up resources directly connected with SQL Server databases and the MS SQL Server database no matter what version...

  http://www.SQLServerCentral.com/forums/Topic1602448-266-1.aspx

  http://www.filerepairforum.com/Forum/Microsoft/Microsoft-AA/SQL-Server/1413-SQL-database-in-suspect-mode

  https://www.repairtoolbox.com/sqlserverrepair.html SQL Server repair Toolbox

• Rec'd dropbox to the message with a photo of the friend doc. Such notice, thought has been expanding doc, immediately went to the zip file downloads. Open the folder several files, open 1, did not open the funny code file. I'm ok, anyone who sent hacked.

  Received email claimed friend which contained dropbox. In dropbox was the photo of the small document and note to friend. (I wasn't familiar with dropbox). The document had seen listed by it. I clicked on see thinking I was enlarging document to read what it was. A folder of zip file immediately went to the download. I opened the case and he had several files listed, suspicious code. One who does not I opened. The person called and they said that their e-mail had been hacked. Someone had mentioned to them that it would be Zeus. Although I have downloaded zip file and open a folder which looked ok, and I did not open the file with the code of suspicion. I agree with you?

  I agree with you?

  Yes. Just delete the files and the message.

• Cannot find the corrupt configuration file to be recovered.

  I had a similar problem to many people, with my computer telling me that the windows\system32\config\system file is corrupted missing. But after trying the steps on the support page, I got no further than the first step that the files that I need to copy could not be found. I tried to jump to their compensation, but, yet again, as they cannot be found, they cannot be repaired! Don't know what else to try as no command doesn't seem to work with anything whatever in the config folder. Then, try the system restore, but don't even know if it's likely to work?

  Any help would be greatly appreciated!

  The problem is usually a corrupted file system and not a damaged or missing file.  The message means that XP tries to start, but just can't find or get the file.  A chkdsk /r usually clears it right up, but when the mistake of Googling, KB307545 is the first results, so unfortunately, it's where people start sometimes.  KB307545 is a corrupted registry or a file system afflicted.  If the file system is corrupted, you will get frustrated quickly with KB307545.

  KB307545 doesn't really work if you follow the directions exactly and you do not have a problem of file system, but I've never, never, never used to solve the problem you describe because it is usually never really necessary.  Recording file corruption does not usually go to the origin of the error.

  If you want to use KB307545, which is something you would do to get your whole system running long enough to make a 'real' system restore, but only after running a chkdsk/r from the Recovery Console.  There is no such thing as a "restoration of the manual system.  There is a "get my system functional enough to do a regular system restore".  KB307545 and a regular system restore are not interchangeable.  It could also be that your system restore is just totally whacked on too much by train.

  What happens when you try to start your system in Mode safe?  What is the last thing you see on the screen?

  What does ' not loading everything '?

  If you use the Recovery Console to implement the KB307545 and have already tried, name changes will not work until you remove the files target of your previous efforts.

  If you want to rename fileA to fileB, you must first remove the current file (if it exists).  Change of name is not identical to the copy so if the target file already exists, you cannot rename just another file on top of it.  You will get an error message.  You will need to delete the old file first, and then rename.  That is why your worked the first time but not the second time - the file you are trying to rename already exists.  You cannot rename on top of an existing file.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Missing thumbnails of images in the scroll bar after the corrupted lrcat file recovery

  Greetings-

  The last 24 hours have been a roller coaster of emotions to say the least. Last night when editing photos my external hard drive suffered a problem of corruption and has stopped responding. I went immediately into emergency mode and started to tear off which doesn't have the data I could from the drive of entry mechanically.

  Fortunately, I keep all my original and raws photos supported on a 10 to RAID 5 array with 2 parity drive if I'm not worried about losing those. In addition, I save my lrcat regularly (once a month) to the same NAS. However, since the last time the catalogue was supported up to and now, of course I did a lot of editing. Another factor of motivation in my back catalog has been the fact that I have 4-5 years with a value of photo retouching in this catalogue. So many years of metadata. I didn't want to lose it all.

  At anyrate, I was able to shoot the catalog, and when I tried to open it in Lightroom, he complained that he was corrupted and he would try to fix it, LR has failed to do. With a little research, I could empty the LR schema and reset the database, deleting constraints bad (there are three). After that Lightroom was able to reopen the newly restored lrcat file and everything was fine. I immediately supported the current state of this catalog to my NAS for well-being.

  The catalog is of course the operational plan, however one thing. My scroll bar containing my images, to the point, are all empty without thumbnails. If I click on a given case, the image is displayed on the portal with all the metadata (the changes that I made, if its been marked or rejected etc.) and the missing tile is regenerated.

  How can I get my thumbnails in the scroll bar for those lacking? Some are there others are not.

  I know this isn't my video card, or use of resources or whatever related to the equipment, it must be something with cache or something. Any contribution is appreciated.

  Please see the screenshot below. Thank you

  

  It was a generic pointing to build 1:1 or build Standard previews.

• Cannot delete the corrupted/unreadable file in mode without failure or BACK

  Instructions Web software to solve my problem was to remove the user files, uninstall and reinstall the program. I was able to delete the 5 files 4. The 5th is damaged and unreadable. It will not remove in safe mode and cannot be found in the BACK. When the path is typed in the BACK the following message; _ is not recognized as internal or external, command an executable program or a batch file.

  1. try running Chkdsk. How to use Chkdsk - http://tinyurl.com/2obcd

  2. If this does not work, try to remove the file from outside of Windows. Start the computer with Linux Livecd such as Knoppix. If the file system is FAT32, you won't have a problem. If it is NTFS, you can use the NTFS driver. Google to find out how. Or try with a Bart PE.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder MS - MVP - Elephant Boy computers - Don ' t Panic!

• Not find search text in the source code files

  If I rename a .vb in .txt or .sql file, I CAN find the text in the file by using a not indexed search, but if I do not rename the file, simple text search CAN NOT find in the file as a "create table" or "function".  This behavior is pretty useless for a developer.  Is there a way to do this type of research, or any kind of utility "Find Classic" that works like Find in XP?  Thank you.

  Here's a FAQ on the incidence of indexation and research: http://windows.microsoft.com/en-us/windows-vista/Improve-Windows-searches-using-the-index-frequently-asked-questions.  You should read the article in full - it is instructive on how research occur in Vista which is very different from how they were in XP.  It includes how to add files and locations to the index.

  To search for the folder C: whole disk in Vista go to start / search and type in ' or '. As you type, you'll see two hyperlinks appear just above where you type and we'll search everywhere.  A click on it.  Who will do a fast indexed search and bring up a dialog box.  Click on advanced search.  Click the drop-down location and find the C: drive and click on it. Check the box "include not indexed, hidden and system files (might be slow).»  Then click on search.  You will now search your entire hard drive to the specified file.  And Yes, this isn't a very effective way to search the entire disk for a file but it is how it is done in Vista.

  Here are some tips on how to find files (and the page includes a number of hyperlinks to related articles while doing the research you can also consult: http://windows.microsoft.com/en-us/windows-vista/Tips-for-finding-files.)  There are also a lot of links to other articles on the research of Vista - but not as good as this.

  I did a search for a character in my book, and each project book came to research (well most of them - all fit in the list without go advanced).  This is because the files .doc, .docx, and Documents are all included in the Index.  I think that if you add .sql and .vb and the location of your files, you'll be able to search by content as well.

  I hope this helps.  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Executable cannot find the custom error code file

  I'm building a LabVIEW 2013 application on a Windows 7 computer and deploying it to a Windows XP computer. My application has a custom error code file, stored in -- errors.txt, but my executable on the Windows XP machine can't find the custom error file and returns only the string of appeal for all errors that occur.

  When you use is not an installer, I tried to copy the error code at all locations listed here: http://digital.ni.com/public.nsf/allkb/6077DBEDA4F9FEE3862571F600449501 but the application still does not load the custom errors. I have the box checked to "Error Codes customized Include" in the construction specifications.

  When an executable of construction and the development of Windows 7 to XP, where do I put the custom error code file? It is found in Program Files (x 86), but find not because it's XP?

  It's been a few months that I posted this question and I do not know if someone cares about this track, but the solution I found was to put the custom in error code file \National Instruments\Shared\Errors\English\

  There are other places that the runtime will look for the custom error codes (I tried all the ones listed above), if the same error codes exist in 2 places the error popup will appear two error messages. Error default 1, it looks like:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: Command requires GPIB controller charge controller.

  So if you have a custom error code file and it is available in 2 places that LabVIEW RTE check error codes, you will get the same message before and after the =.

  List the error as "still included" file when building the executable or by checking the box to include files in error did not tour, obviously. Unless you create a Setup program to distribute the application, the error code file must be moved manually. Shared\Errors file works best for me because it's a place that makes sense.

  Also, don't worry - it doesn't me taken 5 months to understand this point, I do not update all my loyal followers (ha) with a solution.

• After 13 updated both the system rebooted and now as he begins to install XP it autorestarts. It will not recover to the last known good config and delivers a message of corrupted config file.

  Any ideas?

  Thank you

  Frank

  You will share exactly what the message of the corrupt config file says?  My crystal ball takes off the second Wednesday of each month.
  If your system reboots continuously, the next time the system reboots, start tapping the F8 key until you see the menu Boot Options Advanced XP.  On the Advanced Boot Options menu, select:

  Disable the automatic restart in the event of system failure

  This will display the error message that you don't see when the system restarts.  This is what Windows is supposed to do when there a failure - it is supposed to automatically restart.  The error you see on the screen has your clues...

  If you do not see the menu Options start Advancded or you do not have to turn it off automatic restart on option system in the list of choices, you need to try again until you do.  Start typing the F8 key earlier and more frequently as your system begins to come alive.  If you miss the window of opportunity F8, you must try again.
  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)
  ?
  Most of the time (in recent memory) when there is a problem after installing Microsoft updates, the problem is because the computer was somehow afflicted before/when updates have been installed and updates simply bring to the surface a problem that was not evident before.
  If the last thing people remember is to install the updates from MS, it's am understandable reaction in some way involve updates for updating the post problems when things don't work properly afterwards and especially during the next reboot.
  Another reaction is to try to remember all of the updates you have installed and somehow uninstall the updates one of the XP Recovery Console until you find one who is 'responsible '.  Unless you noted all issues of update, it would be more difficult, but not impossible.  It is unlikely that practical or useful advice in most situations, but you can of course try it.
  Security updates sometimes holes patch XP and when security holes are patched (and XP is "tighter"), affliction can no longer do what is done, things to happen are no longer allowed to happen as a result of the strengthening of security, the system has now a new problem (especially when it initializes more) , and it seems that install updates broken system while in fact, it's just a coincidence.
  Another thing that can happen is that the Microsoft updates will change or update certain critical files on the XP system.  Depending on what your software antivirus or antimalware software is, these programs can interpret the new or updated files to day as being a threat or somehow infected and quarantine (effectively delete) files it thinks are wary.
  The next time you restart your system, you'll have some sort of a problem, or you do not start if the files are missing.  Once more, the problem is not with the updates, it's another condition on your system with your antivirus or antimalware programs you beautiful little (they could be aware of what like the new look of Microsoft files).
  You may have seen some or heard talk about some of these kinds of people, but not too intellectually stimulating general or scenarios of error after update:
  NTLDR is missing or corrupt, ntdetect.com is missing or damaged, ntoskrnl.exe is missing or damaged, hal.dll is missing or corrupt, etc.
  These types of errors are usually very easy to fix, but if you don't know what's happening, the temptation is to do a repair installation, or if none of these kinds of things are really necessary, completely reinstall your XP.  I have never done a system restore, a repair install or reinstalled XP in my life to solve any problem (but I did the process for practice).  These things are simply not options with me.
  Given that Microsoft sends many updates on the second Tuesday of each month (they call it "Patch Tuesday"), this means that the or to the second Wednesday of each month there is an increase of 'problems' in the field - in particular the types of problems "my computer does not start after you install the updates from Microsoft.  That day is also known as "exploit Wednesday".
  You can read about it here: http://en.wikipedia.org/wiki/Patch_Tuesday
  It is likely that if you have a problem like this or after the installation of MS updates, someone else has also had the same problem and understood what to do about it.  A problem here, is that no one knows what is your problem.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Each bitmap in the COD file extra resource

  Hello

  JDE generates an additional COD file for each bitmap resource, which I have added to the project. Their names are project - 1.cod, project - 2.cod, etc. Is their way to include these additional catches of cod in the default COD file that is just project.cod?

  I do not; I think that once you exceed a certain size of a COD file (64 KB), it begins to chunk the COD upward into pieces. It's fine, when you deploy OTA or whatever, the phone will re-install the parts and all goes well.