Signed to homegroup, but cannot actually access anything
I created a homegroup on my desktop pc and joined the homegroup on my laptop (I had the window that says "join the homegroup." and clicked the Finish button. Then when I tried to access the homegroup, it's all I get.
I tried the convenience store, have the same setting on both computers sharing, made sure neither sleep or hibernation, there's nobody on the PC, the two are defined as a home network and I left and joined the homegroup on both computers. I don't know what the problem is or how to solve my current problem. When I try to choose the icons nothing happens. I went through countless tutorials to put in place the homegroup, and every time that's what I get.
ANY help is greatly appreciated!
Hello Mariah,
Thanks for posting your question on the Microsoft community.
I would like to know some information about the problem so that we can help you better.
Have you made any changes to your computer hardware or software?
I appreciate your efforts to resolve the issue.
I suggest to disable the antivirus software and check the number.
Reference:
Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
I also suggest you try using the steps described in this article and check the issue.
Reference:
Home group from start to finish
http://Windows.Microsoft.com/en-in/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win81tab1&V2H=win7tab1
Additional information:
Sharing files with group living
http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup
Share files with anyone
http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone
Home Group: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions
I hope this information helps.
Please let us know if you need more help.
Thank you
Tags: Windows
Similar Questions
-
share external hard drive
I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office. I want to be able to back up my laptop hard disk external. Advice please.
geraintjo
I do not use homegroups, but 'true' to share, so I don't know how this is supposed to work with homegroups. But usually he should share a drive or folder, first before you can access it from another machine. (for example, click on the drive/folder properties and go to the sharing tab)
-
Move the tool does not - I can choose, but not actually move anything
I'm on an iMac 27 "end 2012
ElCapitan - 10.11.3
I'm running the latest InDesign CC2015. It works fine on my Windows Surface. It has just stopped working - nothing has changed. No update of the software system or InDesign itself. The tool move will select things, but I can't move anything. Not locked layers or something like that - it does not work in any new or existing document. I can move objects with my arrows. Basically, InDesign is unusable. I teach InDesign - so not a beginner... pretty sure it's a weird or any bug just popped up.
I deleted the cache and user prefs and it did nothing.
Eugene - I have reset my preferences. InDesign does the 'normal' way as you suggest, I went and deleted the files. And InDesign don't always co-oporate - but thanks for the obvious - have you read the part about I am instructor certified Adobe and not a beginner?
He works today. I have problems with Lightroom do not behave properly yesterday. When I tried to look in my application cloud creative, which has been 'broken', too. Everything worked except the applications screen, who turned just as it was loading, but would not actually load. This happened to me before. You cannot uninstall the app CC - in fact he has a fit and said that you always have installed applications. Then... I have re-installed manually cloud creative after that I reinstalled manually Lightroom and now everyone seems to be working as they should - for now.
-
Want to sign old emails but cannot me.
I tried to disconnect from my creative cloud to Adobe account, but it won't let me. It asks me to check and old account that I can't access. I try to uninstall and reinstall Adobe Creative Cloud but comes back with the same old account which I can't access. Need help please.
Please follow the steps below.
- Leave the creative cloud desktop application.
- Delete the opm.db file in the following location:
- Mac OS: Mac
HD/users/Application Support/Adobe/OOBE
match your specific user folder. The /Library/
folder is hidden by default in Mac OS 10.7 and later versions. To access them, see access hidden files from the user's library. - Windows: File C:\Users\AppData\Local\Adobe\OOBE
The AppData folder is hidden by default. To access them, see Show hidden files folders, file name extensions.
3. start the desktop creative cloud application and sign in using your Adobe ID (usually your email address) and password.
Hope this will help you.
Kind regards
Hervé Khare
-
Pavilion 15-p246sa: BIOS update successful but cannot now access the BIOS screen
The recommendation in HP Support Assistant I've just updated BIOS version f33, f34. This succeeded and the Pavilion starts normally.
However when I try pressing ESC at startup key is ignored and the trunk.
How to reactivate the computer to respond to the ESC key and allow me to access the system configuration utility? Have I somehow corrupt CMOS data?
SOLVED! I discovered the site of download drivers HP there is more BIOS updates for my Pavilion, the last being F.42. So I installed this.
At that time, it was possible to get the system configuration utility by pressing the ESC key. However, it works a cold power upward, not reboot.
Also the window by pressing the key is very short, some say about one-fifth of a second, and if you press two times you do not see the system configuration at all. If some patience is required.
-
HP photosmart 5510: I have a put 5510 and just black ink in but cannot do print anything
my printer was out of ink allmost. I wanted to only use the black so bought a new put black and it goes through the motions of printing but nothing is on paper, I removed the program from my computer and reinstalled but still nothing
I tried everything he did print a little test things but I tried to print an email all that came out was a blank new page other empty cartridges would affect the printer, for example if I only wanted to print black (black is a correct full hp cartridge) it would work, should I get the whole lot and try it
-
I have connected my htc wildfire to my pc but unable to access anything whatsoever of him
I had the phone for 2 months, but this is the first time I plugged my PC
Hi callan.
Please contact technical support for your phone http://www.htc.com/www/help/ for assistance with the connection.
Good luck!
Kosh
-
WRT1900AC and Galaxy S4 to connect, but cannot actually get online
I got this router in my wishlist for about 6 months and finally pressed the trigger yesterday. He arrived this afternoon and well, I've experienced this with the DIR-655 Router two years ago... and I'm afraid it's the same problem all over again.
With the DIR-655 Router, you can set the WPA2 with TKIP encryption and the S4 Galaxy would work. I don't see an option with the ca 1900.
I tried all combinations (WEP, WPA2 Enterprise, no, etc. on 2.4 and 5 Ghz) without a bit of luck. I've updated the firmware also. Galaxy S4 (Ver.1.1.8.164461) says it is connected, but I can't get online.
Anyone have any ideas?
He has got to work! I did a hard resetand the two Galaxy S4 in the House have been able to get online.
All I can think is: I had configured the WRT1900AC for the port forwarding for XBox Live (in these instructions), which included the port 80 and 53. Maybe that was re - directing traffic? I do not know... I have connected my Xbox One via Cat5 and now the NAT is open - without having to port forwarding.
I hope this helps others... try a hard reset first!
P.S. It was a stock configuration after a hard rest. My only change was change the SSID and password.
-
I downloaded cloud creative so that I can download the illustrator of an app I have paid for, but once opened, it attempts to verify an email address that I am not associated.
Hi, I found a solution! . If you download the tool from adobe clean > clean all apps > reinstall worked to the CC for me... FINALLY!
-
Firefox says my account already exists, but cannot me access
I recorded with the help of mozilla, and I can connect using my username and password. To configure a synchronization, I have to use my email address. When I try to do, it is said that an account with my address already exists, even if I never put in place. At the same time, it will not recognize my password for support, or it will allow a new password without messing up the account.
Any thoughts?
Data synchronization are deleted from the synchronization servers when change you your password to allow you to walk away with your same account synchronization - it does not make you create a new account. Data on the individual devices are not affected.
A load of fresh data will be sent to the server synchronization you plug each device with the new password.
When the password is changed all the data on the synchronization, the server becomes worthless - the password is used to create a unique "key" to encrypt your data because it "leaves" devices for the sync server. On the "return" from the server to one of your devices, these data are of-encrypted via the "password." The synchronization server stores your synchronization data encrypted - without the 'key' unique (which is recorded in your installation of Firefox) , no one can read your data.
minor editing for clarity
-
1st, I tried almost every fix suggested on this relatively common problem with no joy. It is not a virus, unless it's something very new not found by all the usual scanners.
Only way to access the programs EXE is to run the command prompt by going to with CTRL - tour of the new task (run) in the Task Manager menu and then navigate to the appropriate directory and run the program from the command prompt. Run virus checker and run various registry fixes recommended here with no joy. Safe mode does not help with the launch of the EXE.
Because I get the 'Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item. When I try to run an exe from a link, I think I have lost the user privileges. But, since I can't change the accounts of users or the restore, I can't try to do anything there.
This problem occurred after uninstalling several old unused programs followed by performing a disk defragmentation. (everything is done using Microsoft System Tools). PC worked after doing these things in vain after the next reboot.
Curiously, I CAN start the web browser from the start menu to post this message.
Another clue: I can't start programs by clicking on them, but I CAN run the program by opening a file type associated with this program, i.e., opening a file named text.doc will cause Word to open.
I am a fairly experienced user, but I'm stumped. Any suggestions?
Found solution...
Looked user accounts change program but cannot find or identify it was so impossible to try it.
I was finally able to identify (in trial & error) the restore program and run it using the command window.
The program (rstrui.exe) was found in C:\Windows\System32\Restore\rstrui.exe
I was able to run and to restore to a date when this problem started and that fix. Still don't know what was the problem of the root but happy to be able to fully use this PC back again.
Thank you to everyone who made suggestions. -
I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer. The computers are connected by a switch, fixed IP addresses that are correctly configured and point to a DNS server outside the network. When I try to open the icon for one of the computers, he asked for credentials. I try to type the user name for the computer that is sharing the resource and the password. It is the user account whose computer is loged on and belongs to the Administrators group. for example: user name (Computer1\username) password (password). It does not work. The Windows Firewall is disabled on all computers. It worked well there 2 days. I can't find anything wrong with the network settings. Does anyone have a solution? Thank you.
If the portion of the machine has activated - Simple file sharing (i.e. it is XP Home or it is XP Pro with Simple (default) file sharing) - while all file sharing connections authenticate as user 'guest '. It will not matter what username / password you provide, it will attempt to authenticate as 'guest '. If the guest user has received a password or the guest account is not active, you will experience the symptoms you describe.
If the serving machine running XP Pro and Simple file sharing is disabled, then you should be able to connect by specifying the user as computer\user and the password to connect. To turn off Simple file sharing:
"How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
<>http://support.Microsoft.com/kb/307874 >Also:
"Description of the account in Windows XP"
<>http://support.Microsoft.com/kb/300489 >HTH,
JW -
Cannot access anything whatsoever.
I have a pop internet security window that analysis because I don't know what and I cannot access anything in the administrator account on my computer. Also the sercurity in Panel tab won't let me not activate at all. I get an error message in the lower right pane, saying: he can not access to this. And I say mostly everything. I'm not computer, big words and whatnot may not make sense to me. Also, on my administrator account real, I have a .exe program named (6vx9p4gkqs.exe) If this is useful, who keeps constantly ask my permissions, where of course I continued to decline. It flashes permanently on the lower tab below. I don't know what other information you might need in order to help me, but please ask and I will try my best to post it to the top. Help, please.
response of ahaap is based on the assumption that you have Avast * and * another product of security installed, given that you have posted on the MSE forum. You do not specify which tool you used by Microsoft to analyze, but I guess that's the Microsoft - http://www.microsoft.com/security/scanner/en-us/default.aspx - Security Scanner that does not install. So this isn't your problem.
I'll pass your question to the Windows box of responses under the heading security, privacy, and user accounts.You will find assistance in ensuring that the detected malicious program has been completely removed and to repair the damage, which he did.-steve -
under windows vista, have not been able to read all the emails because 10 days ago, I downloaded an update of Defender. I access my account hotmail ok but can not do anything with the content. I can receive emails, but cannot read them. cannot write emails or the other.
Hi John whiteWA,.
The question you have posted is related to Hotmail and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:
-
IPSec VPN: connected to the VPN but cannot access resources
Hello
I configured a VPN IPSec on two ISP with IP SLA configured, there is a redundancy on the VPN so that if address main is it connect to the VPN backup.
QUESTIONS
-Connect to the primary address and I can access resources
-backup address to connect but can not access resources for example servers
I want a way to connect to backup and access on my servers resources. Please help look in the config below
configuration below:
interface GigabitEthernet0/0
LAN description
nameif inside
security-level 100
IP 192.168.202.100 255.255.255.0
!
interface GigabitEthernet0/1
Description CONNECTION_TO_DOPC
nameif outside
security-level 0
IP address 2.2.2.2 255.255.255.248
!
interface GigabitEthernet0/2
Description CONNECTION_TO_COBRANET
nameif backup
security-level 0
IP 3.3.3.3 255.255.255.240
!
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
boot system Disk0: / asa831 - k8.bin
boot system Disk0: / asa707 - k8.bin
passive FTP mode
clock timezone WAT 1
DNS domain-lookup outside
DNS server-group DefaultDNS
Name-Server 4.2.2.2
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of object obj-200
192.168.200.0 subnet 255.255.255.0
Description LAN_200
network of object obj-202
192.168.202.0 subnet 255.255.255.0
Description LAN_202
network of the NETWORK_OBJ_192.168.30.0_25 object
subnet 192.168.30.0 255.255.255.128
network of the RDP_12 object
Home 192.168.202.12
Web server description
service object RDP
source eq 3389 destination eq 3389 tcp service
network obj012 object
Home 192.168.202.12
the Backup-PAT object network
192.168.202.0 subnet 255.255.255.0
NETWORK LAN UBA description
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.200.0 255.255.255.0
object-network 192.168.202.0 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
network-object object obj-200
network-object object obj-202
access-list extended INSIDE_OUT allow ip 192.168.200.0 255.255.255.0 any
access-list extended INSIDE_OUT allow ip 192.168.202.0 255.255.255.0 any
OUTSIDE_IN list extended access permit icmp any any idle state
OUTSIDE_IN list extended access permit tcp any object obj012 eq inactive 3389
gbnltunnel_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0
standard access list gbnltunnel_splitTunnelAcl allow 192.168.202.0 255.255.255.0
BACKUP_IN list extended access permit icmp any any idle state
access extensive list ip 196.216.144.0 encrypt_acl allow 255.255.255.192 192.168.202.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
backup of MTU 1500
Backup2 MTU 1500
local pool GBNLVPNPOOL 192.168.30.0 - 192.168.30.100 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any backup
ASDM image disk0: / asdm-645 - 206.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static static source NETWORK_OBJ_192.168.30.0_25 destination DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.30.0_25
NAT (inside, outside) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_192.168.30.0_25 NETWORK_OBJ_192.168.30.0_25 non-proxy-arp-search of route static destination
!
network of object obj-200
NAT dynamic interface (indoor, outdoor)
network of object obj-202
dynamic NAT (all, outside) interface
network obj012 object
NAT (inside, outside) interface static service tcp 3389 3389
the Backup-PAT object network
dynamic NAT interface (inside, backup)
!
NAT source auto after (indoor, outdoor) dynamic one interface
Access-group interface inside INSIDE_OUT
Access-group OUTSIDE_IN in interface outside
Access-group BACKUP_IN in the backup of the interface
Route outside 0.0.0.0 0.0.0.0 2.2.2.2 1 followed by 100
Backup route 0.0.0.0 0.0.0.0 3.3.3.3 254
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
WebVPN
value of the URL-list GBNL-SERVERS
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
http server enable 441
http 192.168.200.0 255.255.255.0 inside
http 192.168.202.0 255.255.255.0 inside
http 192.168.2.0 255.255.255.0 inside
http 192.168.30.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 backup
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
ALS 10 monitor
type echo protocol ipIcmpEcho 31.13.72.1 interface outside
NUM-package of 5
Timeout 3000
frequency 5
Annex monitor SLA 10 life never start-time now
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto IPSec_map 10 corresponds to the address encrypt_acl
card crypto IPSec_map 10 set peer 196.216.144.1
card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
ipsec_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
ipsec_map interface card crypto outside
gbnltunnel card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
backup of crypto gbnltunnel interface card
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = GBNLVPN.greatbrandsng.com, O = GBNL, C = ng
Configure CRL
Crypto ikev1 allow inside
Crypto ikev1 allow outside
Crypto ikev1 enable backup
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
enable client-implementation to date
!
track 10 rtr 100 accessibility
!
Track 100 rtr 10 accessibility
Telnet 192.168.200.0 255.255.255.0 inside
Telnet 192.168.202.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.202.0 255.255.255.0 inside
SSH 192.168.200.0 255.255.255.0 inside
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 0.0.0.0 0.0.0.0 backup
SSH timeout 30
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management-access inside
a basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
WebVPN
allow outside
enable backup
activate backup2
internal gbnltunnel group policy
attributes of the strategy of group gbnltunnel
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
greatbrandsng.com value by default-field
Group Policy 'Group 2' internal
type of remote access service
type tunnel-group gbnltunnel remote access
tunnel-group gbnltunnel General-attributes
address GBNLVPNPOOL pool
Group Policy - by default-gbnltunnel
gbnltunnel group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group GBNLSSL remote access
type tunnel-group GBNL_WEBVPN remote access
attributes global-tunnel-group GBNL_WEBVPN
Group Policy - by default-gbnltunnel
tunnel-group 196.216.144.1 type ipsec-l2l
IPSec-attributes tunnel-group 196.216.144.1
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
HPM topN enable
Cryptochecksum:6004bf457c9c0bc1babbdbf1cd8aeba5
: end
When you say that "the external interface is downwards using failover techniques" you mean this failover occurred because the ASA is no longer able to reach the 31.13.72.1? Not that the actual interface is broken?
If this is the case, then the NATing is your problem. Since you're using the same VPN pool for VPN connections the ASA cannot distinguish between the two streams of traffic if the external interface is still in place. The SLA tracking only removes a route in the routing table, but does not affect what happens in the NAT process.
try to change the NAT statement follows him and the test (don't forget to remove the other statements to exempt of NAT for this traffic during the test):
NAT (inside,any) static static source NETWORK_OBJ_192.168.30.0_25 destination DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.30.0_25
If this does not work, I would either turn off the external interface when a failover occurs, or create a second connection profile that contains a separate mass of IP for the VPN connection and ask users to connect using this profile when a failover takes place. Don't forget to create Nat exempt instructions for this traffic also.
--
Please note all useful posts
Maybe you are looking for
-
Whenever I reply to an email, my answer is at the bottom. My client seeks an answer at the top of the email. Is there a way to permanently solve this problem? It is a nuisance to copy / paste at the top of the email every time I answer!
-
Drives and airport Extreme Base Station to disconnect after connection to the VPN
At home when I'm on WIFI, everything works fine. At the moment where I connect to the VPN to do office work, the base station will disconnect and accessible either. Any help?
-
HP Color Laserjet CP2025 print: color printing problem
Had the printer listed above for several years and love it. Have just started having problems with the printer does not print not not in color. Have a recorded document that needs to be printed every month and have had no problems with it, until ye
-
Sync video and analog data on the same GUI
I am programming a request that will be followed and video recording IMAQ and given DAQ. Is there a way to synchornize data during the processing of data on a GUI Viewer displaying the message? I'm looking to start the video as if it were alive, an
-
queue and notifying with state machine
I'm trying to implement a declarant and a queue to collect data that is running on a state machine in two separate loops. I'm new to the whole and methods notifier queue and I think I'm really close to make it work as I want. When I start the compu