Similar auto align layers and auto-merge layers?

Similar Questions

• CS5 - why the Edit > auto-merge the layers (and layers automatic alignment) gray and not accessible?

  I have CS5 and would like to try focus stacking.  I have file > automate > Photomerge with some pictures.  They were aligned in layers.  I want to auto-merge layers, but the function is grey and is not accessible.

  Thank you
  Mark

  What type of layers you want to mix?  It will not work with dynamic objects.  Show a screenshot of your panel of layers, with the selected layers you want to merge.

• Problem with the auto-merge layers

  Hello

  I wanted to make a face swapping with the function of auto-merge layers, but I (or he) fails. I have attached the screenshot of a few celebrities at random for example, but I get similar results with each photo. I think, I'm doing everything according to tutorials, working with RGB, 8 bit, also reset the preferences.

  

  Thanks for any help!

  You must ensure that you have a decent amount of overlap between the two sides.

• URGENT: Photoshop CC 2015 ERROR *: unable to complete the auto-merge layers command because there is not enough memory

  

  I recently downloaded Adobe CC 2015... Face serious problems with the PS when I try to superimpose images.

  
  

  Here are the steps I followed:

  1. file-> Scripts-> battery files

  2. five selected. CR2 files (average size 28 MB)

  3. click on Ok

  4. once photoshop has completed her treatment, selected layers and Edit-> auto-merge the layers-> stack of Images

  Please note that I followed the same steps in converting the CR2s in JPEG... same error result

  Error result

  PS throw up a dialog error: could not complete the automatic Layer Merge command because there is not enough memory

  Expected result

  Photoshop must accomplish the task of auto-merge layers

  Details of the information system

  Here is the report system in case it is useful

  Information system writes to report: 29/11/15 13:23

  Name of the operating system Microsoft Windows 7 Professional

  Version 6.1.7601 Service Pack 1 Build 7601

  System model Inspiron 5520

  System Type X 86-based PC

  Intel Core processor i5 - 3210M CPU @ 2.50 GHz, 2501 Mhz, 2 Lossnay, 4 logical processors

  A14 BIOS Version/Date Dell Inc., 13/05/2013

  SMBIOS Version 2.7

  Hardware Abstraction Layer Version = "6.1.7601.17514".

  The time zone India standard time

  Physical memory (RAM) installed 8.00 GB

  2.39 GB total physical memory

  1.26 GB available physical memory

  4.77 GB total virtual memory

  2.92 GB available virtual memory

  2.39 GB page file space

  Name	GPU Intel(r) HD 4000
  Adapter type	Compatible with Intel(r) HD Graphics Family, Advanced Micro Devices, Inc.
  Description of the adapter	GPU Intel(r) HD 4000
  RAM card	1.01 GB (1,080,743,936 bytes)
  Driver version	8.951.9.1000
  Name	AMD Radeon HD M 7670
  Adapter type	Card compatible (0 x 6840) ATI graphics, Advanced Micro Devices, Inc.
  Description of the adapter	AMD Radeon HD M 7670
  RAM card	1.00 GB (1 073 741 824 bytes)
  Drivers installed	aticfx32.dll, aticfx32.dll, aticfx32.dll, atiumdag.dll, atidxx32.dll, atiumdva.cap
  Driver version	8.951.9.1000

  I guess the real problem here is the drive working, not RAM. They both found messages 'insufficient memory '.

  Historically, Photoshop has always been remarkably well with large files and little RAM. Excess data which cannot be held in RAM are written to the drive to work, and even if it slows down things considerably, it really requires a lot to run Photoshop to a complete stop.

  Of course, you must move to a 64-bit version of Windows. As it is, Photoshop can use less than 2 of your installed 8 GB of RAM. It's not much, but do not attempt to allocate more than 70% in the PS preferences. Process of the operating system and other applications need RAM too. Allowance too will choke the rest of your system and send it to pimples without end-of-file exchange.

• Align layers no longer works

  I've been using Align layers for a long time. Now, when my layers are highlighted and I do: Edit, automatic alignment layers, the select method, I usually select automatic, and then click OK, there is no alignment done, there is no message saying that layers are not enough (40%) or any other message. The mouse pointer seems fair. No alignment done at all. Someone else had this problem? I have not changed any settings. Automatic merging works, but me is no good if my diapers are not aligned. I also had problems with Photoshop not opening not imaged when I choose a picture edited from Lightroom. When I restart my computer, this problem is solved, but often happens again. These are the two new problems. Suggestions, etc., much appreciated.

  Have you tried to reset your preferences? ALT/opt-Ctrl/cmd-shift at the start of the PS.

• How to align layers based on a specific layer

  Hello.

  I just watched this tutorial explaining everything by aligning the layers: https://helpx.adobe.com/photoshop/how-to/photoshop-align-images-multiple-layers.html#

  But, how do I align layers based on a specific layer? Let's say I have a layer about one-third from the left. I have 3 other layers, by going to halfway all the way to the right, I want to be centered based on this layer which is one third of the left, how should I do this? I want to use a specific layer as an anchor for the rest of the layers, regardless of the position of the layer anchor.

  I hope I'm using the right words, explaining what I want to do.

  Deon

  You can link layers and use one for the sorting of the anchor to speak.

  Maybe if you posted a screenshot of what you want to do.

  In any case, here is an example.

  Select the layer, press the layers of link at the bottom of the layers panel and then click on the layer in the layers panel, you want to use as anchor.

  Select the tool, then use the alignment buttons to align the blue layer in this example.

  

  

  

  Can also be used benchmarks commented to align the layers.

• Align layers to the selection within the artboard does not not in 20151114.r.301 x 64

  A very annoying bug has been introduced since the last update:

  If you perform the following steps in a work plan

  (1) make a selection

  (2) select a layer in the layers panel

  (3) layer > align layers to selection > (al six options)

  The layer is not aligned to the selection, but to the artboard instead! Is anyone have a work around?

  By aligning the selection is essential for the harmonization of layers in a drawing or model. I hope that Adobe will solve this ASAP!

  

  This is a bug.

  It's a side effect of change where we allowed layers be aligned with work plans parent; We does not check for an existing selection mask before allowing the artboard to be a widening of the entire alignment.

  Fix is in preparation. Can't comment on the ETA for you, unfortunately. Just know that it is in the pipeline.

  My apologies for the inconvenience.

• Games similar to the command and conquer series?

  Can someone recommend me a list of strategy games that is similar to the command and Conquer Series(Command and Conquer Red Alert;) Yuri revenge; Tiberium Sun, etc.) ?

  One who can run with this old PC platform:

  Microsoft Windows XP SP3
  Intel Pentium IV CPU 2.00 GHZ
  256 RAM
  Radeon 7000 / Radeon VE Family (Microsoft Corporation)

  Thank you!

  Hi saudate,
   

  Please use your favorite search engine and look for one of these programs that is used but be sure to check the system requirements for the game to check its compatibility with the operating system.

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

• Place aligned EditField and BitmapField on PopupScreen

  Hello guys '

  I want to place aligned EditField and BitmapField on PopupScree. But I can't place these 2 fields.

  I used HorizontalFieldManager and VerticalFieldManager of the place. It does not work.

  HorizontalFieldManager hmanager = new HorizontalFieldManager();
  VerticalFieldManager vmanagerRight = new VerticalFieldManager();
  VerticalFieldManager vmanagerLeft = new VerticalFieldManager();
  
  statusLabel = new LabelField();
  direction = new Bitmap(15, 15);
  directionBitmap = new BitmapField(direction);
  
  vmanagerLeft.add(directionBitmap);
  vmanagerRight.add(statusLabel);
  
  hmanager.add(vmanagerLeft);
  hmanager.add(vmanagerRight);
  
  progressPopup = new PopupScreen(hmanager);
  
  ...
  

  What solution is the best?

  Tnx guys

  What you see?  The fields appearing at all or are they not be presented as you wish?

• Hi guys, I need to create inlays video similar to this video and I wonder if After Effects is what I need to do this.

  Hi guys, I need to create inlays video similar to this video and I wonder if After Effects is what I need to do this.

  Here is the link to the video https://Vimeo.com/148280092

  Anyone has any idea if After Effects is what I need for this?

  It depends on the amount of work you're talking about. Many works were by writing the scenario, shooting footage of quality, choose a good music track, the track of the music editing, edit the images of music, etc. before she even had the hands of the AE artist. If you speak only the work of EI, I suppose it would be less than a week, but more than a day. It depends on how much of the look has already been set. Someone has to take this yellow circle with lines through it as their reason for basic design at some point.

  If they gave me the finished edit and the base brand eye/guidelines, I expect to take two or three days to do depending on how picky, I was in nailing the details. The problem is that if someone else has the change, they could have caught the bad shots and I might have to do some rotoscoping and then he could easily balloon in a few weeks!

  I guess that the one who does the work has had enough time to work on it. Because if they had more than a few hours, they would have removed the clichés of the CRAFT of 0:48 0:52. Heck, if you have Pro mocha with the deletion module, which wouldn't even take an hour to remove.

• unexpected results of the Group and the merger of processor

  Hi team,

  I use a processor of group and the merger in a process that includes "Store-num" and the "Cust-num" and mergers based on the most common value.

  I have few records store-Num = 42 and a few records store-num = 426. But for the same "Cust-num" for these two stores, store-num ' 426' we replace "42"

  My point is that these documents should not have grouped at all.

  No idea why this happen?

  Kind regards

  Ravi

  Yes, that's correct. Dates will be converted to a string representation of the date.

• Text won't align horizontally and vertically

  Hello. I'm doing navigation buttons that consist of a text box to the inside. By default, the box is transparent, but when you rollover the text inside the box turns white and the box will turn dark gray. And of course, the substitution effect appears permanently when you are on the page corresponding to the button. Rolling works correctly, but the text should be Center (or middle) aligned vertically and horizontally in the box, and it does not work.

  I tried to use the tutorial here, that's why I used 'inline-table' and 'table-cell' in the css. I had to use 'inline-table' instead of 'table' to make the boxes stay on the same line.

  Here is a test page site: http://gchiller.com/test/

  Can someone please?

  Add this to your CSS:

  #nav p {}

  text-align: center;

  top of the margin: 20px;

  }

• Snapping when you align objects and spaces

  Not sure if this is the right place to discuss this kind of thing, but it is a curious problem I wasn't able to track down a solution.

  I've got InDesign on my work PC and laptop. One of the features that I like is the ability to align objects and snap the based on the spacing or where they are on the page, etc. - that is when you move a picture, it will snap to align the objects around it with ease. For some reason, it is now disabled in EACH document in inDesign on my PC but its still going strong on my laptop. My conclusion is that I inadvertently touched a keyboard shortcut to disable this feature.

  Noobish completely in question - but how I turn it back on?

  Thank you 1 million,

  Pete

  This ended up being the right direction. The feature I need to reactivate was "Guides" (ctrl - you and I presume, cmd - u).

  Thanks for the help.

• Aligned margins and paragraph space

  Hi guys,.

  Is it possible to have bottom aligned margins and a better separation/paragraph of title? Here are the samples

  (1) nice bottom aligned but too close position of paragraph margins

  http://tinyurl.com/75bkhek

  (2) section nice / point of separation but very ratings looking for substantive margins

  http://tinyurl.com/6wry7ps

  I think it is a very common thing when text is right on a grid of text... but I saw the annual report and other samples that solves the problem. How?

  See you soon,.

  We will study your second example that you have linked above. In the left column the text above the position and the position itself, all seem to be on the 12pt baseline grid, but the following text looks like he has some 'space after' added in the paragraph style, maybe 6 pt or half a line. You have made the position of space by adding a blank line (empty paragraph).

  If you want to maintain the grid reference for the body of the text, you have two options. Set snap to grid in the style for at least the first paragraph of the body after a cap or maintain the attack throughout all the paragraphs as a multiple of the spacing of the grid. Another way of looking at this, is that your headers should float in a space that is equal to a multiple of the spacing of the grid, two, three or maybe four lines. If you want half a line after the title, you have to find a way to add the other half a line so the total is an even multiple. one way to do that is to increase spacing applied to the section push it down and leave more space above. Another is to add space, and a third is to add a space after the paragraph before the title.

  The big problem is what happens when the title is at the top of a column. If you use one of the paragraph spacing options, the extra space is ignored by ID and disappears in the upper part of the column. If you add to the leading value, you must set your text field for the first options 'leader' base line or the extra space is also lost on the top, and in any scenario where the title falls in high and space is lost at the top of the column to your body text does not have to align with the grid in this column. If you set the first base to attack line, you get the desired spacing, but now there's a blank space at the top of the column that you probably don't want.

  What all this boils down to is you can't have your cake and eat it, too. To keep the body of the text on the grid, set the attribute align to grid property and accept that the gap is more important between the titles and body text when the title is a top of a column or when the title is run more of a line, OR set the first base property for your blocks of text to attack and make sure that the principal assigned to your headers is equal to a multiple of the main complete assigned in body text AND configure the time space equal to the leading value for the body of the text (and any space before is also set to a multiple full body of text leading).

  First base line set to attack and put body to snap to grid:

  

  First put in charge, all the text base line using this multiple head (that is to say, the principal amount is twice the attack of the body of text):

  

  First base line the leading value (can also be assigned to the rise), all text uses the same type of size and fine:

  

  In all the examples above, I added to the heading style space equal to the attack of the body of text and equal to two times the space.

• Auto align layers of the image

  You are looking for an alternative to Photoshop CS3 (because it is no longer available for me) and hoping to emigrate to photoshop elements.

  Running a test print but find a feature I use a lot that seems to be missing... or at least severely restricted as far as I can understand.

  I want to be able to auto align different (although visually similar) images in several layers in a single document so that each layer can be hidden/edited individually.

  Pretty basic editing things, but (guided) photomerge options all seem to want to complete the merge for you.

  I don't - I want just the layers oriented so that I can edit each layer manually myself.

  Is there a way to do this?

  LazyCarrot wrote:

  You are looking for an alternative to Photoshop CS3 (because it is no longer available for me) and hoping to emigrate to photoshop elements.

  Running a test print but find a feature I use a lot that seems to be missing... or at least severely restricted as far as I can understand.

  I want to be able to auto align different (although visually similar) images in several layers in a single document so that each layer can be hidden/edited individually.

  Pretty basic editing things, but (guided) photomerge options all seem to want to complete the merge for you.

  I don't - I want just the layers oriented so that I can edit each layer manually myself.

  I don't know exactly how the different your project comes from a fusion of standard panorama.

  When Photomerge process ends with elements, you can switch to "expert".

  I would ignore the merged layer obtained by hide it or delete it.

  Now you have the usual layers aligned by default, which might not be exactly what you want.

  You can play with the alignment of layers or masks to customize your results.

  Once you want to save the result, you can select the top layer and do the usual shortcut Ctrl Alt Shift E allows you to merge the result in a single layer.