Simple question on display as text

Similar Questions

• Simple question - alternative text of the attribute in the same Word document

  Ok. I am having a brain freeze and cannot find the answer in the help of the OPA. Simple question.
  
  Is there a simple way to alias an attribute for use in Word?
  
  For example, the following two conclusions create 2 attributes where I want only 1 attribute.
  
  annual percentage rate = 6
  APR = annual percentage rate
  
  Is there a configuration option or something to alias APR as the rate of annual percentage for use in Word? I want to use in the same Word document. Something in my head tells me that I have seen that once before, but all of a sudden, I've got a brain freeze.
  
  Sorry for such a simple question, but sometimes I get too deep into the weeds.

  Hi Paul,.

  You may think the style of the legend of OPA. In the 2007 OPM Office Ribbon it's called legend of the table, but I think that it works with the rules of non-table in Word as well - it is certainly used to.

  It's a style of OPA rule which can be used when you want to refer to an abridged version of an attribute, for example "APR" rather than "the annual percentage rate. According to me, that it applies only to the immediately lower rule where it has been defined in the doc and the doc not complete.

  I did a quick search in the help of the OPM and found references to the style of legend, but I have not found a description of the functionality (search is not too good if).

  Essentially how it works...

  Above the rule to write the version abridged, then the word "is", then the text of the full attribute, for example

  APR is the annual percentage rate
  

  Side note: I have always "BOLD" the "is" in the callout line. It is not necessary, but I want to do it because it makes it more clear at a glance what part is the shorthand and which part is the text of the full attribute.

  Then apply the style of the legend of the table to the line, then put your Word table or the ordinary rule underneath, for example

  [legend]APR is the annual percentage rate
  
  the result = APR * 10 
  

  I use this feature occasionally. Usually it is when I have calculations in Word tables and I'm trying to make the more readable left column, for example using something "APR" in the formula so that it does not take much space.

  See you soon,.
  Jasmine

• A simple question please help.

  Hello

  I have 2 textfields and a button. I want to enter a number (in diameter) in the first textfield (inputField) and by clicking the button (myButton), I want to get the (circumference) result in the second textfield (inputField1). diameter * 3.14. I know it's a simple question, but it is a very simple mind. Then, have mercy on me.

  import flash.display.Sprite;
  import flash.text.TextField;
  import flash.text.TextFieldAutoSize;
  import flash.text.TextFormat;
  import flash.text.TextFormatAlign;
  import flash.events.MouseEvent;

  var inputField:TextField = new TextField();
  var myFormat:TextFormat = new TextFormat();
  myFormat.size = 44;
  inputField.defaultTextFormat = myFormat;
  inputField.restrict = "0-9";
  inputField.maxChars = 6;
  inputField.multiline = false;
  inputField.textColor = 0 x 000000;
  inputField.border = true;
  inputField.width = 150;
  inputField.height = 50;
  inputField.x = 75;
  inputField.y = 50;
  inputField.borderColor = 0xFF0000;
  inputField.type = "input";

  addChild (inputField);

  
  var inputField1:TextField = new TextField();
  var myFormat1:TextFormat = new TextFormat();
  myFormat1.size = 44;
  inputField1.defaultTextFormat = myFormat;

  inputField1.maxChars = 1;
  inputField1.multiline = false;
  inputField1.textColor = 0 x 000000;
  inputField1.border = true;
  inputField1.width = 150;
  inputField1.height = 50;
  inputField1.x = 275;
  inputField1.y = 50;
  inputField1.borderColor = 0xFF0000;

  addChild (inputField1);

  
  myButton.addEventListener (MouseEvent.CLICK, fl_MouseClickHandler_2);

  function fl_MouseClickHandler_2(event:MouseEvent):void
  {
  {
  trace ("mouse clicked");
  

  }
  }

  use:

  import flash.display.Sprite;
  import flash.text.TextField;
  import flash.text.TextFieldAutoSize;
  import flash.text.TextFormat;
  import flash.text.TextFormatAlign;
  import flash.events.MouseEvent;

  var inputField:TextField = new TextField();
  var myFormat:TextFormat = new TextFormat();
  myFormat.size = 44;
  inputField.defaultTextFormat = myFormat;
  inputField.restrict = "0-9";
  inputField.maxChars = 6;
  inputField.multiline = false;
  inputField.textColor = 0 x 000000;
  inputField.border = true;
  inputField.width = 150;
  inputField.height = 50;
  inputField.x = 75;
  inputField.y = 50;
  inputField.borderColor = 0xFF0000;
  inputField.type = "input";

  addChild (inputField);

  var inputField1:TextField = new TextField();
  var myFormat1:TextFormat = new TextFormat();
  myFormat1.size = 44;
  inputField1.defaultTextFormat = myFormat;

  inputField1.maxChars = 1;
  inputField1.multiline = false;
  inputField1.textColor = 0 x 000000;
  inputField1.border = true;
  inputField1.width = 150;
  inputField1.height = 50;
  inputField1.x = 275;
  inputField1.y = 50;
  inputField1.borderColor = 0xFF0000;

  addChild (inputField1);

  myButton.addEventListener (MouseEvent.CLICK, fl_MouseClickHandler_2);

  function fl_MouseClickHandler_2(event:MouseEvent):void
  {
  {
  inputField1.text = String (Math.PI * Number (inputField.text));

  }
  }

• Simple question... How do to add pictures on the body of my MAILS found 1000 results for how can I add photos to my Thunderbird emails

  How can simple question - I add photos to my mail body. But instead of the answer - found 1000 results for how can I add photos to my Thunderbird emails. There are answers that don't apply at all to the question anyway. Why must it be so difficult to get a simple answer to a simple question?

  Thunderbird is a bit like Microsoft, all the reasons as I dumped MS Live Mail.

  First, a lot of help for Thunderbird refers to the menus that may not be visible. It would be useful to you and us if you have your menus and toolbars visible.

  http://chrisramsden.vfast.co.UK/13_Menus_in_Thunderbird.html

  Then, open a window of writing. Activate the menu and operate.

  Now that you see an option "Insert"?

  If this isn't the case, you can assign composing in plain text, which does not support embedded images.

  Tools | Account settings| {Select account} | Composition & addressing and ensure "Compose messages in HTML format" are checked. If it is not already checked, go back to writing a message. No better now?

  Once you have the mode of composition HTML goes, you can use Insert | Image or various permutations of copy - paste and drag - move to the body of your message.

  A manual of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/

• simple question: is the f2280 a printer/scanner wireless?

  Simple question: is the f2280 a printer/scanner wireless?

  This widget could not be displayed.

• Assessment JavaFX: a few simple questions

  Hi all.
  
  I am to evaluate the possibility of migration of Swing to JavaFX development. I have a few simple questions, and simple answers will suffice.
  
  1 is mature enough to support all Project Professional JavaFX?
  
  2. JavaFX is a functional superset of Swing? I mean. Is capable enough to do any other thing that Swing can make JavaFX?
  
  3. is also well documented that the Swing JavaFX is? I mean especially the Swing tutorial and the Javadocs.
  
  4A JavaFX equivalent to "treeWillExpand" event? Also important in my case.
  
  5 a JavaFX frames internal for the development of MDI?
  
  6a JavaFX equivalent of JFormattedTextField? I use this component intensively for the validation of the data and formatting.
  
  7A the JavaFX AutoComplete text field component? Or is it difficult to develop a custom for this component?
  
  8. is it is possible to mix different styles of text (i.e. text color) in a text field component?
  
  9 is it difficult to create custom components and extend/decorate existing ones?
  
  10. is the beta for Linux mature enough to start trying? Can I use Netbeans with the current beta on Linux?
  
  Thank you!
  Antonio.

  I'll take a shot at answering them, some of them are probably better answered by one of the developers if:

  1. it seems stable and has a feature set large enough should allow you to create the lack of parts yourself

  2 JavaFX and Swing are unrelated to each other. JavaFX has its focus more on the provision of outstanding visual effects without trying to look the same as other applications on your platform. For example, control of JavaFX table doesn't have a built-in filter support and sort - it's something you can do yourself with appropriate templates.

  3. There are some examples out there already but no where near as many Swing. However, the Javadocs seem good enough, I could usually find what I wanted there.

  4 are not specifically, I think, but I'm sure that you should be able to veto over enlargement, by changing the State where you receive when a node is open or by consuming the appropriate event. Better write a small test for this program to see if you can do what you want - and if not, a feature to apply.

  5 I don't know well.

  6 No.

  7 there not. It is not too difficult to develop custom components.

  8. not directly I think, but a combination of FlowLayout + text objects must be able to do what you want.

  9. I developed some custom components, mainly by combining other components and that seems pretty easy. I don't know how you can change the functionality of a component exist (such as change the text field component in a text formatted field or who can use several colors; you will probably have to create your own skin for more delicate changes. Skin isn't very well documented.

  10. I do not know this.

• How can I make the text box caption to display a text variable that is longer than the length?

  Hi all, I would like to do this: make a text caption to display a variable that contains a paragraph of text that the user has typed as soon as possible.

  I created the maximum length of the variable only 1000 and I am able to partially displayed variable in the text caption - only at the end of the first line of caption text.

  ICan someone tell me how to configure the text caption so that it can encapsulate texts? I can't find it in the properties panel.

  Thank you very much.

  No need to shout, even if I'm not native English, I understood your question very well, and this can be done with the enhanced TextArea widget as I mentioned. Here is a screenshot:

  

  Workflow:

  • Create a user variable, I scored it
  • Insert twice the widget with variable TextArea (Jim Leichliter, CaptivatePro), on the screen, these are the two rectangles on the bottom red and blue
  • Configure the first Widget to be associated with v_text and show this variable by inserting a default $$ v_text$ $
  • Configure the second Widget to display this variable by inserting returns a default $$ v_text$ $
  • You will need a button to refresh, so that the text appears in the second widget. Here I used the button, and then assigned to the action "Jump to slide" with the same number of slide so that the playback head rewound to the beginning of the slide
    
  • The text in the second widget shows; as you can see, it can be formatted as you wish.

  If you want to display the text in another slide, no need to make the action update, it automatically displays when you get to this slide.

  It is not a text caption that is displayed, but the widget. Is this a problem?

  Lilybiri

• Simple question about tree

  It is a simple question but I don't seem to be able to solve it, the thing is I have a component of the tree and I don't want any image for icons (by default, they are included), I want to just plain text, so I need to remove the sheet, disclosure and the folder icon that appear in the tree component.
  
  Any ideas on how to do this?
  
  Thank you

  The attached code allows, but does not solve the arrow without removing the possibility to expand the tree.

  Delete the following command to see the arrows (maybe that's what you want):
  disclosureClosedIcon: ClassReference ("classes. EmptyIcon");
  disclosureOpenIcon: ClassReference ("classes. EmptyIcon");

• Simple question - how to make a readonly field

  Simple question - how to make a readonly field

  Hi DougBlincoe!

  I think you're looking for this:

  1. create the element. See "creating a Page level item.

  2. navigate to the appropriate page definition:

  Go to the Home Page of the database.

  Click the icon of the Application Builder.

  Select an application.

  Select a page.

  The definition of Page appears.

  3. under items, select the name of the element.

  The attributes for the element page.

  4. to display an item under certain conditions:

  Scroll up to Conditions.

  Make a selection in the list Type of Condition.

  Enter an expression in the fields provided.

  * 5. To make an element read-only: *.

  Scroll to display playback settings.

  Make a selection in the playlist only Type of Condition.

  Enter an expression in the fields provided.

  Click on apply changes.

  Here, you will get more information about this:

  # Create the item. See ["Creating a level of Page element" | http://download.oracle.com/docs/cd/B25329_01/doc/appdev.102/b25309/bldapp.htm#BCEFHBHG].
  # Navigate to the appropriate page definition:
  # Go to the Home Page of the database.
  # Click the icon of the Application Builder.
  # Select an application.
  # Select a page. ------------------Definition of Page appears.
  # Under items, select the name of the element. ------------------Page attributes for the element.
  # To display an item under certain conditions:
  # Conditions scroll.
  # Make a selection in the list Type of Condition.
  # Enter an expression in the fields provided.
  # To make a read-only element:
  # Scroll the display reading settings.
  # Make a selection in the playlist only Type of Condition.
  # Enter an expression in the fields provided.
  # Click on apply changes.

  Here, you can read more information about this:

  http://download.Oracle.com/docs/CD/B25329_01/doc/AppDev.102/b25309/bldapp.htm#sthref805

  I hope this helps!

• addons page displays white text on white background

  I'm legally blind. It became a never-ending struggle to get Firefox to display the colors correctly. I use the black contrast theme. and Firefox is configured to display white text on black background. Recently, I needed to adjust the color for unvisited links. I could not because the colors of the palette are all black. I found a solution here to switch the State of (I think) browwser.treference.inconfig. This gave me the screen options of old back and it worked. Now, I can't go back because the screen addons and about: config white text on white background.

  Last post on this topic-, it is a known bug, #1207084, which is marked as resolved.

• In a sequence of CTF, is it possible to obtain a text file of sequence clips display? There is a display of text file for clips (cmd-9). Zoom the timeline cancels the ability to see the whole sequence of the time line.

  In a sequence of CTF, is it possible to obtain a text file of clips in sequences display (name and duration)? There is a display of text file for clips (cmd-9). Zoom the timeline makes this visible annotation for shorts, cancels but the ability to see the whole sequence of the time line. Of course, it would help my editing.

  TIA

  In Final Cut Pro 7, you can use editing > find command to search on used clips in the sequence. See if there is an equivalent command in FCE. Unfortunately, I can't determine that at first hand on my system. (In addition, if you are still interested whereas FCP X, there the so-called Timeline index which provides quick access to a list of markers, clips, effects, etc..)

  Good luck.

  Russ

• Firefox does not display a text on some pages.

  I noticed that on some pages, Firefox does not display some texts. I have the latest version of Firefox installed and my flash and java are updated. The text appears correctly on Chrome and IE. Please see my example in the screenshots of the stevenson.edu Web page. Does anyone know what I can do to solve this problem or if there is some kind of plugin need me to see some content? Thank you.

  Screenshot of Firefox: http://i47.tinypic.com/123359k.jpg
  Screenshot of Chrome: http://i48.tinypic.com/2uy3ay1.jpg

  The site appears to be using an old 1.2.0 version of MooTools which is not compatible with curent releases Firefox.

  • http://Stevenson.edu/includes/mootools.js
  • http://www.Mozilla.org/en-us/Firefox/18.0/releasenotes/

  Quote: Mootools 1.2.x incompatible with Firefox 18 and newer. Fixed in Mootools 1.3 and newer (see 789036)

  • bug 789036 - MooTools 1.2.x has been broken by the addition of String.prototype.contains

  (please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html)

• MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on ex

  MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.

  You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.

  Maybe someone else will chime in with their own experiences.

  Russ

• The simple question is "where can I find the installer for the HP Quick start?

  The simple question is "where can I find the installer for the HP Quick start?

  BESR regards

  Hello:

  And here's one for W8...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_140915_1#tab1

• Display a text box before running a program

  I am designing a new interface for a pulse on LabView duplicator and I wanted to display text on the front before running the program. I managed to create text boxes that appear after the code begins to run, but I was wondering if there was a way to display these text boxes before the code runs.

  Maybe I'm misunderstanding / simplistic, but if you have a string indicator (text box - as you call it) you can simply type in what you want the initial value of the being, and then right click and select 'data operations.  Then choose "Use current default".