Simple question - part Split Page?

Similar Questions

• MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on ex

  MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.

  You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.

  Maybe someone else will chime in with their own experiences.

  Russ

• Starting with a Cintiq in Adobe Flash - a series of simple questions desperately not found!

  I am completely new to the Flash IDE, but I used my 13HD Cintiq with Photoshop in the past. Despite the Tablet works well and correctly drawing, so far Flash feels very weird and almost unusable. I spent hours searching online for answers to these simple questions, and I found nothing. Help please respond if you can!

  1. Eraser brush size: I have the wacom pen, brush and Eraser gum (pretty standard) value. Can I adjust the size of the brush of the pen in the toolbar, but the gum is stuck to the smaller size! I put the tool eraser for the max brush size, and when the stylus is set on the Eraser tool directly, it is larger. How to set the other side of the pen wacom for a larger size of the brush? And aren't there keyboard shortcuts to increase or decrease the size of brush in Flash? (similar [and] in Photoshop)

  2 zoom brush: changes the brush size when you zoom in. People online say the size of the brush is constant, but it is simply not true. When you zoom to 200%, the brush must be twice as big is in 100% zoom. Is it possible to Flash this (normal) behavior?

  3 timeline packaging: can visit the 'step before an image' and "not back an image" (comma and period) key wrap the entire timeline, so walking to the front on the last image will frame 1 and walking backward on frame 1 goes to the last image? It's important for me to animate well loops, and I can't find anything online or in the preferences. Shift + comma and shift + period is acceptable workaround solutions, but they are not ideal, because I have the comma and period mapped to buttons on the Cintiq. I need them to wrap!

  4 digital brush thickness: is there a way to specify a thickness of brush with a number? I have to use the pen to get the STROKE thickness properties? At the very least, can I use a keyboard shortcut to specify the size, rather than click on toolbars?

  Honestly, I'm at the end of my rope here. I'm almost ready to completely abandon the Flash this in Illustrator, and then animate in Flash, so I've drawn everything correctly. Why everything is so different, and why I can't find one of these simple questions online?

  Him long and short of it is no you can't do most of the things you want to do as much as the brush is concerned. Flash has ALWAYS increased the size of the brush as you approach and it decreases when zooming. Why? No idea, but it has always been so.  You CAN increase the size of the brush in numbers but using the properties box. The Eraser is weird in Flash. so I use the Lasso tool and select what I don't want and delete it. Given that you're used to Illustrator you might not realize that selection of a brush stroke areas will NOT select the entire race as in Illustrator. You can only select parts. You can also sort of allow for what you call enveloping chronology by installing a command and by mapping to a custom key command. Make sure that there is a keyframe at the end of the cycle.

  Dropbox - Flash_Select_Next_and_Previous_Keyframes.zip

  Also, this could sort through what you want too:

  http://www.toonmonkey.com/frameJumper.fla

  Finally, Flash is no different that there has never been and it must be considered that, while the Illustrator has been developed by Adobe, Flash was developed by Macromedia and was then bought by Adobe years later then you "cannot really be expected to operate the same. Personally, I HATE the interface of Illustrator and hate the way it works if I hate it if Flash worked as an Illustrator!

  In any case, I hope this helps.

• Simple question - alternative text of the attribute in the same Word document

  Ok. I am having a brain freeze and cannot find the answer in the help of the OPA. Simple question.
  
  Is there a simple way to alias an attribute for use in Word?
  
  For example, the following two conclusions create 2 attributes where I want only 1 attribute.
  
  annual percentage rate = 6
  APR = annual percentage rate
  
  Is there a configuration option or something to alias APR as the rate of annual percentage for use in Word? I want to use in the same Word document. Something in my head tells me that I have seen that once before, but all of a sudden, I've got a brain freeze.
  
  Sorry for such a simple question, but sometimes I get too deep into the weeds.

  Hi Paul,.

  You may think the style of the legend of OPA. In the 2007 OPM Office Ribbon it's called legend of the table, but I think that it works with the rules of non-table in Word as well - it is certainly used to.

  It's a style of OPA rule which can be used when you want to refer to an abridged version of an attribute, for example "APR" rather than "the annual percentage rate. According to me, that it applies only to the immediately lower rule where it has been defined in the doc and the doc not complete.

  I did a quick search in the help of the OPM and found references to the style of legend, but I have not found a description of the functionality (search is not too good if).

  Essentially how it works...

  Above the rule to write the version abridged, then the word "is", then the text of the full attribute, for example

  APR is the annual percentage rate
  

  Side note: I have always "BOLD" the "is" in the callout line. It is not necessary, but I want to do it because it makes it more clear at a glance what part is the shorthand and which part is the text of the full attribute.

  Then apply the style of the legend of the table to the line, then put your Word table or the ordinary rule underneath, for example

  [legend]APR is the annual percentage rate
  
  the result = APR * 10 
  

  I use this feature occasionally. Usually it is when I have calculations in Word tables and I'm trying to make the more readable left column, for example using something "APR" in the formula so that it does not take much space.

  See you soon,.
  Jasmine

• Assessment JavaFX: a few simple questions

  Hi all.
  
  I am to evaluate the possibility of migration of Swing to JavaFX development. I have a few simple questions, and simple answers will suffice.
  
  1 is mature enough to support all Project Professional JavaFX?
  
  2. JavaFX is a functional superset of Swing? I mean. Is capable enough to do any other thing that Swing can make JavaFX?
  
  3. is also well documented that the Swing JavaFX is? I mean especially the Swing tutorial and the Javadocs.
  
  4A JavaFX equivalent to "treeWillExpand" event? Also important in my case.
  
  5 a JavaFX frames internal for the development of MDI?
  
  6a JavaFX equivalent of JFormattedTextField? I use this component intensively for the validation of the data and formatting.
  
  7A the JavaFX AutoComplete text field component? Or is it difficult to develop a custom for this component?
  
  8. is it is possible to mix different styles of text (i.e. text color) in a text field component?
  
  9 is it difficult to create custom components and extend/decorate existing ones?
  
  10. is the beta for Linux mature enough to start trying? Can I use Netbeans with the current beta on Linux?
  
  Thank you!
  Antonio.

  I'll take a shot at answering them, some of them are probably better answered by one of the developers if:

  1. it seems stable and has a feature set large enough should allow you to create the lack of parts yourself

  2 JavaFX and Swing are unrelated to each other. JavaFX has its focus more on the provision of outstanding visual effects without trying to look the same as other applications on your platform. For example, control of JavaFX table doesn't have a built-in filter support and sort - it's something you can do yourself with appropriate templates.

  3. There are some examples out there already but no where near as many Swing. However, the Javadocs seem good enough, I could usually find what I wanted there.

  4 are not specifically, I think, but I'm sure that you should be able to veto over enlargement, by changing the State where you receive when a node is open or by consuming the appropriate event. Better write a small test for this program to see if you can do what you want - and if not, a feature to apply.

  5 I don't know well.

  6 No.

  7 there not. It is not too difficult to develop custom components.

  8. not directly I think, but a combination of FlowLayout + text objects must be able to do what you want.

  9. I developed some custom components, mainly by combining other components and that seems pretty easy. I don't know how you can change the functionality of a component exist (such as change the text field component in a text formatted field or who can use several colors; you will probably have to create your own skin for more delicate changes. Skin isn't very well documented.

  10. I do not know this.

• Question of master page frames & text

  Hello, all. Question on master pages and blocks of text, if you don't mind.

  I was told that I didn't draw a text frame on the master page, the margins are going to be the same size as my block of text. OK, hooray, set up the master page without a framework text (and according to a number of additional templates out of this).

  It turns out that I had to change the margins later, after the original text, I have had paid. The text block in the pages that have not changed, and I had to resize them all by hand on the individual pages... I couldn't do it on the master page.

  What I did wrong, and how can I avoid this in the future? Part, of course, do not change margins after pouring text. Heh.

  All my best,

  Chryss

  You have to turn on the adjustment of the layout in the menu layout, before you make a change like that. Blocks of text that align with margin guides will resize with the guides (and of course, this will change the text of an image to the image stream).

• Simple question on the passage of ID variables in a url after you add a new record

  Hello;
  I know it's a simple question, I have a brain block. I'm going from a form and insert a new record in the db, but after I insert the new record, I want to pass the ID variable that gets are entrusted to him. How can I do this?
  
  It's my code to insert:
  
  < cfset EventDate = "#DateFormat(form.eventDate,"mm/dd/yyyy") #" >
  < datasource = "" #APPLICATION.dataSource # cfquery "dbtype ="ODBC">"
  INSERT INTO events
  (title, eventDate, eventTime, location, contact, telephone, fax, email, URL, sponsor, body)
  VALUES (< cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.title #" >,)
  < cfqueryparam cfsqltype = 'cf_sql_date' value = "" #EventDate # ">,"
  < cfqueryparam cfsqltype = "cf_sql_time" value = "#form.eventTime #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.location #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.contact #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.phone #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.fax #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.email #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form. "URL #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.sponsor #" >.
  < cfqueryparam cfsqltype = "cf_sql_longvarchar" value = "#form.body #">) "
  < / cfquery >
  < cflocation url = "events_RecordView.cfm" >
  
  In the cflocation I want to pass the variable ID, how about a new record?
  
  Thank you.
  
  CFmonger

  Try this. This will select in the query exactly what was inserted just enter the id and pass id just to get in the variable. If two people fill out the form at the same exact time, that assure that they are redirected to the appropriate page.

• Simple question - how to make a readonly field

  Simple question - how to make a readonly field

  Hi DougBlincoe!

  I think you're looking for this:

  1. create the element. See "creating a Page level item.

  2. navigate to the appropriate page definition:

  Go to the Home Page of the database.

  Click the icon of the Application Builder.

  Select an application.

  Select a page.

  The definition of Page appears.

  3. under items, select the name of the element.

  The attributes for the element page.

  4. to display an item under certain conditions:

  Scroll up to Conditions.

  Make a selection in the list Type of Condition.

  Enter an expression in the fields provided.

  * 5. To make an element read-only: *.

  Scroll to display playback settings.

  Make a selection in the playlist only Type of Condition.

  Enter an expression in the fields provided.

  Click on apply changes.

  Here, you will get more information about this:

  # Create the item. See ["Creating a level of Page element" | http://download.oracle.com/docs/cd/B25329_01/doc/appdev.102/b25309/bldapp.htm#BCEFHBHG].
  # Navigate to the appropriate page definition:
  # Go to the Home Page of the database.
  # Click the icon of the Application Builder.
  # Select an application.
  # Select a page. ------------------Definition of Page appears.
  # Under items, select the name of the element. ------------------Page attributes for the element.
  # To display an item under certain conditions:
  # Conditions scroll.
  # Make a selection in the list Type of Condition.
  # Enter an expression in the fields provided.
  # To make a read-only element:
  # Scroll the display reading settings.
  # Make a selection in the playlist only Type of Condition.
  # Enter an expression in the fields provided.
  # Click on apply changes.

  Here, you can read more information about this:

  http://download.Oracle.com/docs/CD/B25329_01/doc/AppDev.102/b25309/bldapp.htm#sthref805

  I hope this helps!

• Simple question... How do to add pictures on the body of my MAILS found 1000 results for how can I add photos to my Thunderbird emails

  How can simple question - I add photos to my mail body. But instead of the answer - found 1000 results for how can I add photos to my Thunderbird emails. There are answers that don't apply at all to the question anyway. Why must it be so difficult to get a simple answer to a simple question?

  Thunderbird is a bit like Microsoft, all the reasons as I dumped MS Live Mail.

  First, a lot of help for Thunderbird refers to the menus that may not be visible. It would be useful to you and us if you have your menus and toolbars visible.

  http://chrisramsden.vfast.co.UK/13_Menus_in_Thunderbird.html

  Then, open a window of writing. Activate the menu and operate.

  Now that you see an option "Insert"?

  If this isn't the case, you can assign composing in plain text, which does not support embedded images.

  Tools | Account settings| {Select account} | Composition & addressing and ensure "Compose messages in HTML format" are checked. If it is not already checked, go back to writing a message. No better now?

  Once you have the mode of composition HTML goes, you can use Insert | Image or various permutations of copy - paste and drag - move to the body of your message.

  A manual of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/

• The simple question is "where can I find the installer for the HP Quick start?

  The simple question is "where can I find the installer for the HP Quick start?

  BESR regards

  Hello:

  And here's one for W8...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_140915_1#tab1

• simple question to function test of value chain

  Hey guys,.

  I m just started using teststand.

  My simple question is related to the function "test string value '. What is the difference between the "type of comparison' CASE SENSITIVE and IGNORE CASE? From my point of view are not really meaningful names.

  To avoid simple and stupid questions like that, I tried to use the internal helper function. I'm wrong when I say that the help features are not as good as in labView? I couldn t find any answer to my question... hmmm... How other people handle this situation? (outside of just trying?)

  Thanks for your help

  Hello

  Case SENSITIVE: it will fail if you compare "HELLO" with 'Hello' or 'A' with 'a '.

  IGNORE CASE: this will pass if you compare "HELLO" with 'Hello' or 'A' with 'a '.

  Hope that explains

  Jürgen

• I don't have to fix anything; I have just a simple question.

  I have just a simple question: what is maximum allowed data on Microsoft Outlook Express emails? Please, let me Know.Thank you.

  You should check with your ISP for this information. Your ISP mail servers dictate the maximum size of your mail more attachments. Outlook Express is simply a client program to encode, and send/receive binary data for you.
  Microsoft® Security MVP, 2004-2010

• Simple question R61i Ultrabay...

  It's really a simple question, but I can't find the answer in any of the documents online.  I have a laptop Lenovo R61i 15.1 "widescreen, and I just need to know if it comes with a slot for Ultrabay Slim drive, a drive advance Ultrabay location or an other versions Ultrabay.  I would like to buy a long battery life to adapt to the Ultrabay box, but I see that the different Ultrabay models are not compatible, I want to know what one I need to buy for my computer.  Any help appreciated.

  widescreen 15.4 inch R61i like any other laptop R6x use housing Ultrabay Enhanced readers with EIDE interface and not the new laptop Rxxx SATA interface.

• Simple question about the signing of the app

  Hello.

  I develop libraries to be used in other apps.

  It will be a cod file, its name will be added to the jad as a dependency.

  My library has access to the secure API (call of the browser), so I have a simple question:

  can I register only my cod library or application that uses my library is expected to be signed in too?

  THX.

  You should be ok just signature cod of the library, if your application uses any API secure. However, I just make a habit to sign everything just in case.

• Create a group of users to ACS 3.3 - simple question

  Hello

  I have a simple question:

  How can I create a group of additional users at the ACS 3.3?

  I don't see the option to delete or create groups of users. Perhaps is it not possible?

  Thanks in advance

  All groups that you have already exist in the list of groups (0 to 499). To "create" a new group, just rename one of the unused existing groups and use.

  If you don't see the groups in your list, you must verify that you have access to see all these groups.

  Verifier check in the control of the Administration, select your admin user ID. In the second table below marked 'administrator', you will see the "available groups" and the editable section 'groups '. move the groups that you want to use available for editable.

  Present and then OU should be able to see these groups on your drop-down list in the section groups.