Size and type of Application Logo BlackBerry?

Similar Questions

• SSDS must be similar in size and type to raid 0?

  SSDS must be similar in size and type to raid 0?  I have a 2009 MBP 2.66 bicoeur.  SSDS are an old sata 250 GB Samsung 850 pro III and an all new Intel 160 GB (320 series) sata II.  The hard drive on the MBP interface is 3.0 GB/s sata optical drive interface is 3.0 Gbit/s

  Different size, different brand, sata II issue III v?

  If it works, it will be almost double the read and write rates, I understand.  I am aware of the increased risk of data loss.  Will only use for backup data.

  How is it difficult to set up raid 0?  I don't know the first thing about raid 0, 1, 2, 3?

  Thank you

  Stu

  If it works, it will be almost double the read and write rates, I understand.

  RAID offers for the SECOND and the following read/write of the same LARGE file acceleration and not otherwise. Any intervention of reading or writing in different files eliminates the acceleration. Any acceleration is much more dramatic on rotating discs, because it can eliminate some of the 10 ms or more long 'dead time' while the reader is a new track and the controller must wait for the correct data go in the position under the read/write head. Acceleration on the low-latency SSDS is far less dramatic.

  The system drive / boot is particularly bad choice for a RAID, it reads and writes small random files in all directions. Who will get no acceleration.

  You can best be served by creating a workflow that allows separate readers for the source files to Destination files, files of zero and drive system / boot.

  --------

  RAID is usually done on the disks that are exactly or nearly the same. Too slow response of one of the discs can cause the RAID failure.

  RAID support has been removed the disc utility GUI in 10.11 ElCapitan, probably because too many casual users got into trouble with the built-in GUI functions. You need to use the diskutil command in the Terminal, or buy the SoftRAID(4) package.

• How can I set the default font size and type for the outgoing Hotmail mail?

  How can I set the default font size and type for the outgoing Hotmail mail?

  Hi Dale,

  What is the email client do you use?

  Outlook can be configured per - start Outlook-> Tools-> Options-> mail-> fixed Format and fonts... Select the font and size you need... Click ok on all screens.

  I hope this helps.

• Options to see file size and type?

  Where can I turn on options on an image and get the file size and type?

  Thank you.

  Stan,

  You can see the file type by placing the cursor on the file in the library view, and it will display the name of the file with the extension jpg, nef as tiff.

  If not in library mode, go to grid view it's size in pixels of the files as well as the name of the file to the format.

  If you are not able to see it go to view > display Option.

  Check the option display the label header

  Hope thatt helps.

  Florian

• Calculator tip and unit conversion Applications suggested blackBerry smartphones

  I'm bored of having these two things I had on fixed phones before I got my Blackberry Storm.  I hope that here, some users have some input as to what they find works best, because I am sure that I'm not the only one who wanted what they.

  AlmightySage wrote:
  Is it possible that I can download only those applications for the entire world selection or what I have to buy the whole package and then select those who I want?  I tried to look online but he did not appear in the list of recommended apps and this is the only place where I found a list.  So if someone could give me a link to the entire list, or both, that would be so great.

  Hello

  You can only buy the individual applications of AppWorld. AppWorld is free.

  AppWorld is just a store, buy individual items, what you want, when you want.

  In AppWorld use the search feature, simply type tip calculator or conversion unit.

  What did you ask?

  Thank you

  Bifocals

• Can what size and type of disc I use to create recovery and rescue to 8.1

  I saw 25 available but GB BD - R can't seem to find a regular CD - R with this ability.  The BD - R will work?  I have an Inspiron Desktop 3847.

  Any drive with enough capacity will work. Any type of CD is limited to 800 MB, DVD 4.7 GB and Blu - Ray up to 50 GB (I think that these values are correct, correct me if I'm wrong). If you have a blu Ray burner, blu Ray disk will work.

• Combine the size and attributes with application Dates

  Hello, I'm trying to combine data from two tables (DIMENSION and ATTRIBUTES) below and load the data corresponding to the OUTPUT.

  Can anyone share idea on how I can combine the two? (attribute table has no ID and has only COUNTRY & TYPE to join DIMENSION)

  Version Oracle 11g: (11.2.0.2)

  
  

  CREATE TABLE DIM (ID VARCHAR2 (10), NAME VARCHAR2 (20), TYPE VARCHAR2 (20), COUNTRY VARCHAR2 (2), EFF_DT DATE, DATE END_DT);

  CREATE THE TABLE ATTRIBUTES (TYPE VARCHAR2 (20), COUNTRY VARCHAR2 (2), CHAR (1) OF THE CLASS, EFF_DT DATE, DATE END_DT);

  INSERT INTO VALUES('1','ABC','A','US',TO_DATE('30-SEP-2013','DD-MON-YYYY'),TO_DATE('31-DEC-2099','DD-MON-YYYY')) DIM;

  INSERT INTO VALUES('1','ABC','A','CA',TO_DATE('30-SEP-2013','DD-MON-YYYY'),TO_DATE('31-DEC-2099','DD-MON-YYYY')) DIM;

  INSERT IN DIM values('2','XYZ','B','US',TO_DATE('3-FEB-2014','DD-MON-YYYY'),TO_DATE('31-DEC-2099','DD-MON-YYYY'));

  INSERT IN the values('A','US','C',TO_DATE('1-JAN-2014','DD-MON-YYYY'),TO_DATE('28-SEP-2014','DD-MON-YYYY ATTRIBUTES '));

  INSERT IN the values('A','US','C',TO_DATE('29-SEP-2014','DD-MON-YYYY'),TO_DATE('31-DEC-2099','DD-MON-YYYY ATTRIBUTES '));

  INSERT IN the values('A','CA','E',TO_DATE('1-JAN-2014','DD-MON-YYYY'),TO_DATE('28-OCT-2014','DD-MON-YYYY ATTRIBUTES '));

  INSERT IN the values('A','CA','E',TO_DATE('29-OCT-2014','DD-MON-YYYY'),TO_DATE('31-DEC-2099','DD-MON-YYYY ATTRIBUTES '));

  Thank you.

  Maybe let separate everything first delete duplicates

  with

  Sun did

  (select id '1', the name of 'ABC', 'A' type, 'US' country, to_date('30-SEP-2013','DD-MON-YYYY') eff_dt, to_date('31-DEC-2099','DD-MON-YYYY') end_dt Union double all the)

  Select '1','ABC','A','CA',to_date('30-SEP-2013','DD-MON-YYYY'),to_date('31-DEC-2099','DD-MON-YYYY') of all the double union

  Select '2','XYZ','B','US',to_date('3-FEB-2014','DD-MON-YYYY'),to_date('31-DEC-2099','DD-MON-YYYY') of the double

  ),

  attributes such as

  (select 'A' type, countries 'US', 'C' class, to_date('1-JAN-2014','DD-MON-YYYY') eff_dt, to_date('28-SEP-2014','DD-MON-YYYY') end_dt Union double all the)

  Select 'A','US','C',to_date('29-SEP-2014','DD-MON-YYYY'),to_date('31-DEC-2099','DD-MON-YYYY') of all the double union

  Select 'A','CA','E',to_date('1-JAN-2014','DD-MON-YYYY'),to_date('28-OCT-2014','DD-MON-YYYY') of all the double union

  Select 'A','CA','E',to_date('29-OCT-2014','DD-MON-YYYY'),to_date('31-DEC-2099','DD-MON-YYYY') of the double

  )

  SELECT id, name, type, country, class, eff_dt, end_dt

  NVL (lead (eff_dt) over (partition BY id, type, order of eff_dt countries) - 1, end_dt) end_dt_new

  from (select distinct id, name, coalesce(type_d,type_a) type, country, case when x = 'a' then class end class, eff_dt,)

  -case when end_dt = date ' 2099-12-31' then add_months (trunc (eff_dt, 'yyyy'), 12)-1 else end_dt end end_dt

  from (select d.id, d.name, d.typ subscription_type, a.typ type_a, d.country, a.class,)

  d.eff_dt d_eff_dt, d.end_dt d_end_dt, a.eff_dt a_eff_dt, a.end_dt a_end_dt

  Dim d

  full outer join

  attributes one

  We d.country = a.country

  and d.typ = a.typ

  )

  UNPIVOT ((eff_dt,end_dt) for x in ((d_eff_dt,d_end_dt) as ' of,(a_eff_dt,a_end_dt) like 'a'))

  )

  order by 1,2,3,4,6

  ID	NAME	TYP	COUNTRY	CLASS	EFF_DT	END_DT	END_DT_NEW
  1	ABC	A	CA	-	30/09/2013	31/12/2013	31/12/2013
  1	ABC	A	CA	E	01/01/2014	28/10/2014	28/10/2014
  1	ABC	A	CA	E	29/10/2014	31/12/2014	31/12/2014
  1	ABC	A	WE	-	30/09/2013	31/12/2013	31/12/2013
  1	ABC	A	WE	C	01/01/2014	28/09/2014	28/09/2014
  1	ABC	A	WE	C	29/09/2014	31/12/2014	31/12/2014
  2	XYZ	B	WE	-	03/02/2014	31/12/2014	31/12/2014

  Concerning

  Etbin

• How can I change the default setting of font size and type when using e-mail?

  When sending an email, I have a default setting of the Arial font to 10 points. If I change what it comes down to Arial next time I use it. I don't know how to change the default setting.

  Hi Robin,

  What e-mail program you are using (name and version)? Windows Mail, Windows Live Mail, Outlook, a program that you access through your browser (and if yes, what name and version of the browser?) something else (and what version and/or year of this product)?

  What Version of Vista you are using (for example, 32-bit Vista Home Premium SP2 or other)?

  Thank you!

  P.S. I am pretty sure that the procedure is simple and can be done-, but it varies depending on whether you use, so I want to provide the information that is applicable to you.

  **********************************************************

  EDIT: Just a few alternatives which may help:

  If Windows Mail, go to Tools / Options / compose / font settings (ditto for fonts Signature if you use signatures) and change it to anything you want.  Save the changes and close Windows Mail, and then reopen it.  Your default sending policy should now be what you set with this configuration.

  ************************

  If Windows Live Mail, this MVP following is courtesy of Michael Santovec,:

  "You use the Windows Live Mail (WLM) installed on your PC or the.
  Hotmail/Live.com Web site?  If in case of doubt, by reading an e-mail message has
  Help (ALT + H).  If the help pop-up menu and the last item will say 'on '.
  Microsoft Windows Live Mail"you use the WLM (2008/2009) program.  If she
  'About Internet Explorer', says, you use the Web site.  If the House of Ribbon
  Select instead of the Help menu, you are probably using the version of WLM 2011.  TO
  check the selection ALT + F, about.

  For questions of Hotmail (Hotmail.com/Live.com/MSN.com), use these forums
  (Including the use of the website of Hotmail and Hotmail account problems)

  http://windowslivehelp.com/product.aspx?ProductID=1

  Set the default font for new messages - only applies to messages in HTML format

  -WLM-2008/2009: tools (ALT + T), Options, dial
  "- WLM 2011: ALT + F, Options, Mail, compose.

• Paper size and locked type

  I have a 5530 send HP printer that I use with my windows operating system 7, via e-print.  Scanning works very well, printing works fine on standard 8 1/2 X 11 paper, but when I tried to print photos on HP 4 X 6 photo paper, all options to change the paper size and type display a padlock icon and I don't know how to unlock them.

  Hello

  I have no Corel, but for Photoshop CS6, I can see many formats of paper available. Please try:

  b click Print (or Ctrl + P).

  (b) click on 'print settings ',.

  c select Photo printing & paper...

  d click on "Paper/quality" tab

  (e) click on advanced.

  You should see a list of several sizes, some are locked (no support) similar to:

  

  If you could not see as above the list, I think you need to re - install the drivers and software.

  Kind regards.

• Change the size and font for any field type?

  Because that copy / paste to the font size and type with it I want to create a script which change

  I tried get to the function 'exit' of the material as follows:

  Form1. TestPage.Subform1.TextField1.font.size = '10pt '.

  Form1. TestPage.Subform1.TextField1.font.typeface = "Myriad Pro";

  I also tried a search field button changes to a script I found online, but it does not work for me:

  function ProcessTextEdit (oField)

  {

  }

  function ProcessAllFields (oNode)

  {

  If (oNode.className is "subform")

  {

  Search fields in the child.

  for (var i = 0; i < oNode.nodes.length; i ++)

  {

  var oChildNode = oNode.nodes.item (i);

  ProcessAllFields (oChildNode);

  }

  }

  Else if (oNode.className == "field")

  {

  Switch (oNode.ui.oneOfChild.className)

  {

  case "textEdit":

  If (oNode.parent.className is "Subform")

  {

  Form1. TestPage.Subform1.TextField1.font.size = '10pt '.

  Form1. TestPage.Subform1.TextField1.font.typeface = "Myriad Pro";

  }

  }

  }

  }

  No luck. Any suggestions?

  I tried the only control font size and type everything by allowing users to retain the flexibility to use color, bold, underline, etc. to highlight certain information when he text above. Plain text allows it. So far, everything I've read, is not possible because Livecycle is not able to control the attribute of Rich Text of the word imported into a Rich text box in Livecycle.

• Displays a text ("sample application") Logo and Description ("this is a sample application") with different font size

  Hello

  
  

  I use the universal theme of apex 5.0 and tries to display logo text ("sample application") and description ("This is a sample application") with different font size.

  
  

  Type of logo - text

  Logo - sample application - this is a sample application.

  I want to display the description in the smallest font size, so I changed the Logo below

  Logo - < span style = "" are-size: 3.8 rem; ' > Sample App </span > - < span style = "" Dimensions are: 1.8 rem; "> this is a sample application </span >" "

  But I have following problem.

  1 - the font size for both is the same (why the size is not different?, because I gave the size of different font within the span tag)

  2 - the text of the whole logo whose description is displayed twice.

  -Once in place of the actual logo and

  -the second on the left upper tree navigation. (just below the text of the actual logo)

  I tried to use the logo attribute, but what makes the whole logo & its description with the same size. I need size of different font for both, so it is unusable.

  Attribute logo - style = "" are-size: 3.8 rem; ""

  Really appreaciate help.

  Thank you

  Deepak

  DeepakJ wrote:

  I use the universal theme of apex 5.0 and tries to display the text of the logo ("sample application") and description ("this is a sample application") with different font size.

  
  

  Type of logo - text

  Logo - sample application - this is a sample application.

  I want to display the description in the smallest font size, so I changed the Logo below

  Logo - application example - This is an example of application.

  But I have following problem.

  1 - the font size for both is the same (why the size is not different?, because I gave the size of different font within the span tag)

  Cannot reproduce. Using the code above results in different format text as expected. (He looks terrible IMO)

  2 - the text of the whole logo whose description is displayed twice.

  -Once in place of the actual logo and

  -the second on the left upper tree navigation. (just below the text of the actual logo)

  Including HTML tags in text in the 5.0/theme 42 APEX logos results in this behavior. I consider this as a bug as (a) it says nowhere that it is not possible to do so; (b) the text of the logo is not HTML - or attribute-escaped when used in the page.

  See How to avoid to show the logo on the navigation bar to get an explanation of the underlying cause and a workaround to allow the common use cases include the text and a picture in the logo. This particular solution is of no use here. The solution to this problem requires a custom with the theme the theme roller style sheet, which is the preferred way and support to customize and extend the universal theme.

  • Click the Thème Roller on the developer toolbar.
  • Expand the CSS custom section.
  • Add this style custom rule:

  .t-Header-logo a span {
    font-size: 3.8rem;
  }
  .t-Header-logo a span:after {
    font-size: 1.8rem;
    content: " - This is a sample application.";
  }
  

  • The page will automatically preview changes.
  • Click on record under and type a name for the style of custom theme.
  • Topic close Roller
  • I hope that decide that it is not a good idea and cancel the mods.

• I want to develop an application Live TV for BlackBerry PlayBook. Please guide where can I find the specifications such as width, height, and icon sizes and design factors etc.

  I want to develop an application Live TV for BlackBerry PlayBook. Please guide where can I find the specifications such as width, height, and icon sizes and design factors etc.

  Guideleines of the user and the specifications on the sizes of icons etc to BlackBerry PlayBook OS Applications

  OK, I downloaed the pdf below for UI guiderlines

  UI_Guidelines_BlackBerry_PlayBook_Tablet_2_1.PDF

  Ok

• Physical size and the type of disk hard drive in my XPS M1210?

  Hi, for the first time poster here. I'm about to buy a new hard drive to replace the original one in my XPS M1210. I just need to know the physical size (3.5 "? 2.5"? etc) and type (7200 rpm or something else?) of him so I don't know the correct type to buy and replace by.

  Thank you!

  notch16

  The physical size of the SATA hard drive is, 9.5 MM x 2.5 ", either 5400 or 7200 RPM works perfectly.

  Bev.

• Vista will not display description of the file on mouse over. File name, Type, size, and Date modified see the upward, but no description.

  Vista will not display description of the file on mouse over. When I mouse over, a pop-up window displays showing: file name, Type, size and Date of change, however, it does not show the description of the file.

  So, for example if I have 5 files on different types of screw - the description tells me that the size of the screws. IE. 1.5 mm or 1. 8 mm.

  Update: try to get the description of the file displayed messing around in the file properties, now out of 10 records, only 2 includes the name of the file in the mice on the pop-up window. So now what lack us, it's the file name and the Description file.
  Help, please...

  Description of the file in as long as this is not one of the available variables, which can be shown with ToolTips - but there are others who could easily serve the same purpose. Here are the options:

  Consulted
  Attributes
  Created
  DocAuthor
  DocComments
  DocSubject
  DocTitle
  Modified
  Name
  Size
  Type
  To write

  Here is an article on how to change what is shown. http://www.ghacks.net/2008/02/10/customize-windows-explorer-tooltips/ . It is to change the registry, make sure you so first back it up before doing anything so that you can recover in case you make a mistake (or do the right thing, but it does not work as expected). http://www.instant-registry-fixes.org/how-to-backup-windows-vista-registry/ .

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Is there any type of application that would let someone fill out a short form and upload photos?

  Is there any type of application that would let someone fill out a short form and upload photos? We will launch a campaign to try to collect pictures of the application, and I would like to send contacts to a place where they can fill in their information and upload their photos to the application. Any ideas?

  Sorry for the delay in responding. Right now, we use WooBox to launch a contest for 80 business units. Launch page that we use the HTML code of the WooBox to have one "like Gate.  That means, users must like our page before voting on the contest. WooBox will also give you the ability to export the users once your contest is over. You can download the file in Eloqua and synchronize contacts by e-mail. I hope this helps.