Size of swap file Windows VM and best practices.

Similar Questions

• (Swap file Windows 2008) VMware performance monitoring

  Today, one of my virtual machines filled the memory and the Windows 2008 host wrotes a lot of memory in the paging file.

  VMware under memory use only 40% has shown that the memory in use.

  In esxtop, I spent to memory but did not find a counter that indicates that the virtual machine has been Exchange inside the BONE.

  The MEMSZ was esxtop 4096, SZTGT = 4300, TCHD = 1600, % ACTV = 26%

  How could I follow if a virtual machine is exchanging the memory inside the BONE? PowerShell?

  Thank you in advance!

  Hello.

  Swap file: % of usage and pagefile: % maximum counters in native performance monitor can be used.

  Good luck!

• Process modeling: design patterns and best practices

  Hello
  
  Could someone please suggest / share any technical information or documents tha associated with "modeling of process - Design Patterns & Best Practices."
  
  Thanks in advance
  
  Santosh K.
  
  Published by: Santosh539 on July 29, 2010 16:07

  Here is an article I wrote on the process design patterns and best practices for BPM http://www.bptrends.com/publicationfiles/05-06-WP-BPMProcessPatterns-Atwood1.pdf trends

  It is specific for Oracle BPM.

  Dan

• Swap file Windows 7

  Separated from this thread.

  Hello there, first sorry my bad English, and if subject iposting badly want application, any swap file, I have windows 7 / 8 GB of ram and my question is if I don't put the custom paging file no pagin file I have damage pc hardware or not?  Thanks for the reply

  Hello

  You need a page file and you should let Windows manage.

  How to change or move the virtual memory paging file in Windows 8, Windows 7 and Vista
  http://www.Vistax64.com/tutorials/132201-virtual-memory-paging-file-change.html

  ===============================

  To improve performance using these methods.

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Peformance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the professional, full and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/welcome-to-the-performance-and-maintenance-Forum/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Download timer estimate not updated until the file is made of 7/8, size of the file not considered and corrupt downloads!

  Sometimes when I download a file of the estimator download will not update until that file is downloaded about and made. It didn't happen in the previous versions, I think somewhere around v15? or whenever the new download manager has been implemented.

  Another problem is that the size of the file is unknown until mainly downloaded.
  (a.k.a. "calculation of the remaining time - x MB 103 MB (132 KB/s)")
  didn't matter what Internet connection I use, can not repeat on a local network download.
  Sometimes, I don't get on the servers really really really really really fast.

  Oh, and don't forget corrupt downloads!
  file will download as usual, but smaller than the total size who said that the Web site or the list dialog confirmation boxing. Download complete report manager!
  Ending up with a zip file or other file that will not open or run.

  No antivirus software, I run clean, safe and vigilant.

  I managed to get photos, take a look.
  https://www.dropbox.com/sh/gu2yiffrazxpasc/xVaAEH4Kod

  I use an extension to go back the look, feel and function of the old Download Manager, but it still isn't correct in new download manager.

  but as has been said elsewhere, I'm probably going to create a new profile so I hope that this will disappear when I finally get around to that?

• What is "c: / program hidden folder files/Windows apps and why I can't access it?"

  Hey there,

  Make certain to play and ran through the hidden folder mentioned in the title. There is one account of course on our Surface, full administrator access and I was wondering what it is and why I can't access it. When I try to access the folder, I get the following:

  "You don't have currently not allowed access to this folder. Click on continue permanent access to this folder. »

  Then, like a good boy, I click on continue and...

  "You have been denied permission to access this folder."

  But wait... I can click on a link hyper to the Security tab, Ok...

  "You must have read permissions to view the properties of this object. Click Advanced to continue. »

  Don't panic!

  "You must have read permissions to view the properties of this object. Click on continue retrying with administrative permissions. »

  Okey Dokey!

  Takes me of course to features advanced security where it is said the owner of the folder is "Trusted Installer" and "directors" shows correctly with the settings read and execute access to this folder, subfolders and files.

  Can someone please clarify what this file is for and why there is a folder on my RT Surface that I can't access?

  Thanks for reading,

  To do this >

  Open CMD as mentioned above write this >

  TAKEOWN /F "C:\Program Files\WindowsApps" r d Y

  (Whit quote... better to copy paste... only he)

  that way, you'll see hundreds >

  Success: the file (or folder): XXX blah blah blah

  and wait, it stops.

  then again type this >

  ICACLS "C:\Program Files\WindowsApps" / grant administrators: F/t

  You may see nothing... a moment... then... .boooooom :D

  After that, you will see something like: the files successfully treated XXXXX; Treatment failure 0 files

  If its exactly like this "failed processing 0 files" then your done good... and go have fun

  Thanks to Lydia Rohit... I just corrected the mistake on his part (cuz paths of Pentecost of spaces need quotes)

  (After having done all that, you cannot get change permissions... fix too copy the file in the other place, modify, delete the first file and then add your file modified in the folder)

• to access the QML attached objects in C++ and best practices for the handling of the user interface in classes

  Hello

  I have in fact 2 queries

  (1) how can we access attachedobjects defined in QML in C++?

  (2) I'm loving development on Blackberry 10 C++ is one of my favorites. But I'm a bit lost when it comes to managing the user interface in classes. For example when we create the project through momentics we have a class called ApplicationUI. It manages all the (default) user interface commands, we in C++. as for example creating the document qml and setting as root user interface, etc. I am now working on an app that have NavigationPane as root, and then I continue to push pages (like the screens). But now the code for all pages is inside my ApplicationUI. What is the best practice to keep the UI for each page logic in a separte C++ class?

  I also develop for Android that a separate class for each activity, this code does not mingle for each activity. Please guide me how can I keep logic of user interface of each Page into a separate class of C++?

  regarding your second question:
  I think this is the simplest approach to keep all things in the UI in QML. You can easily put things into separate files.

  If you want to use c ++ to the user interface: can be done, too. just put it in separate classes and include those in your application class.

• The ESXi 4.1.0 to 6.0 upgrade. -upgarde and best practices

  Hi guys,.

  We are a small business with a single physical server, ESXi 4.1.0 installed with approx. 8 VMs. We plan on buying Essential Kit 6.0 ESXi because that's all we need right now. However, as VMWare says that 4.1.0 to 6.0 upgrade is NOT supported (matrices of the interoperability of products VMware), how we improve our host and VMS?

  I guess the correct way will be upgraded from 4.0. 5.5 U3 first, then to 6.0. However, if we buy the 6.0 license essential Kit, that we will be able to always download and install and upgrade of the host and all VMs to U3 5.5, and 6.0. Essentials?

  In addition, what are the best practices to upgrade a single host with multiple virtual machines? What I did research, we should back up important files from virtual machine, all critical data, etc. All recommendations are welcome. My understanding is that the upgrade also virtual machines will be upgraded automatically, that's correct - methods of upgrade to ESXi 5.5 (2058352) | VMware KB

  Best regards

  D. Stanchev

  Hello

  As you said, you cannot upgrade host ESXi 4.x to 6.x, you must first upgrade 4.x to 5.x and then switch to 6.x

  Before moving to 5 or 6, make sure you ESXi host is compatible with ESXi 6.

  Check cheque and VMware hardware compatibility list if your server is listed.

  Although you'll have a 6 ESXi license kit, you can download ESXi 5.x and use it to upgrade process.

  Only if you need to use 5.x permanently, then you need to get your license keys downgraded to 5.x, otherwise once you upgrade host to 5.x, go ahead and level to ESXi 6.x

  Backup-

  Before you begin the upgrade, make sure that you have backup of all VMs critics.

  Either you can download/export all VMs as OVF, or you can use Veeam's free edition to make the backup of virtual machines

  -Update

  You can join the server ESXi ISO Installer and boot server form ISO and update.

  During the Installation process make sure to select ' PRESERVER VMFS and upgrade ESXi host '

  If you do not keep vmfs, all virtual machines will get deleted during the installation/upgrade process.

  Once you get ESXi Host upgrade to Upgrade VMFS 5.x version so that it can support 6.

  Then finally the ESXi host to 6.x upgrade, yet once make sure PRESERVE you VMFS during installation.

  If you have vCenter Update manager, use update reach the average upgrade easy it is to upgrade.

  Thank you

  Hentzien

• Streaming Mode of performing my procedure and best practices

  Hi guys

  I want to make sure I did the right thing

  OK, I've created a thinapp application I created a .dat and .exe for my application. Now, I want people access thinapped app which is in the folder shared.

  What is the correct procedure? I want to say create the dat file and the .exe and after he put on a share, and after create shortcuts on desktop computers (pointing to my .exe file) if people have access to the app thinapp?

  is that all?

  now, what are best practices for this procedure continuously?

  Thank you very much

  Yes, that's really all. Nice and simple, isn't? You can use the ThinReg utility to create shortcuts (as administrator, run thinreg/a"
  "" "server\share\path\to\virt\apps\*.exe"). "

• Roles, permissions - DataCenter, file, Cluster, host Layout - best Practices\How-to

  Have a little problem with permissions and roles. I'm sure it will be an easy one for those of you with more experience of working with roles. I hope that my layout organization made with quote boxes is readable.

  The Organization has just spun a new host ESXi 4 for developers and added in vCenter. Developers want to use the vSphere Client\VIC to manage the ESX Server. They need rights to create virtual machines, remove VMs, clone VMs, VMs potential power. However, we don't want them to be able to reach production.

  According to the diagram below, the new host of development, labeled as "HostC (autonomous DEVELOPMENT host)", is located under "Data Center-City-2", who also owns the production ESX clusters. " And obviously I don't want developers having rights on production groups.

  Lets say I have create a role called 'HostC Dev Sandbox Rights', add users and assign directly to "HostC" below. This role contains the VM 'create' right, however when I run the wizard Creation of VM of HostC as a member of the role the vSphere Client tells me this task requires rights create VM on the level of data center! But given these developers to create VMS access on the data center would give them rights to create virtual machines in the poles of Production! Which is obviously a problem.

  I can't believe that our need to give these rights to ONLY one host in a DataCenter is rare. I don't know that there is a misunderstanding on my part of how to configure VMware roles for best practices.

  Anyone with more expirence on VMware roles ready to help me on this one? Thanks in advance!

  Organization representative Schema using quote boxes:

  vSphere (vCenter Server)

  City of DataCenter-1

  Many cases, clusters, hosts

  City of DataCenter-2

  FolderA (Division A)

  ClusterA (A Cluster of Production)

  HostA1 (Production host in Group A)

  HostA2 (Production host in Group A)

  %Windir%$NTUninstallKB941568_DX8$\Spuninstb (division B)

  Focus (Production Cluster B)

  HostB1 (Production host in Group B)

  HostB2 (Production host in Group B)

  HostC (autonomous DEVELOPMENT host) - under %windir%$NTUninstallKB941568_DX8$\Spuninstb but not in the cluster

  City Center-3

  Many cases, clusters, hosts

  You can apply permissions directly to the data store.  I didn't need to go further than the clusters in our environment, but what really works for you is to place data warehouses in folders for storage.  Have the records be the names of your groups hosts and clusters.  Then place the warehouses of data for each cluster in the corresponding folder.  Then, just apply permissions for the data on the record instead of warehouses in each individual data store.  Off topic a little, but a records of something in the store of data discovered lack is the function of "views of storage" and I put a future application.

  Yes, if you set permissision to the view of the data store the user can turn opinion and see.  Extensive your permissions framework tests is guaranteed before pushing users.  Looks like you are already doing.

• Little memory, no size of swap file

  I have 4 GB of ram but computer says low in memory. I went into the properties of the system, the performance options, virtual memory, and I have no paging file size (none) I tried the size of the managed system and size custom, defined, and restarted. no result yet of a memory. any ideas?

  Hello

   
  Method 1:
  Refer to the link below and follow the steps.
  Prevention of problems of memory
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/low-memory-no-paging-file-size/39589e6d-F9F9-4cdb-8f39-c7c6aa14e152
  
  Method 2:
  You can also try the steps mentioned on the Web page that the link is mentioned below.
  Change the size of virtual memory
  http://Windows.Microsoft.com/en-us/Windows-Vista/preventing-low-memory-problems
   
  You can read the article published on the Web page, see the link below.
  What is virtual memory?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-virtual-memory

• Files Windows XP and RAW

  Windows XP does not recognize the RAW files on my camera (Nikon D80) and converts them to JPEG. How can I stop this?  Also, it does not recognize the camera as an external storage device, but my deskto don't.

  XP does not recognize the cameras as external storage.

  In my computer, it's under the cameras and Scanners

  In Device Manager it is under imaging devices

  In the computer management it does not arise under removable storage

  XP cannot open, read or convert the RAW images.

  Cameras that take RAW images can take just regular, just gross or both at the same time.

  Your raw image must have a file extension. NAVE

  Check your settings on your camera again and check to see if you have .nef files in your folder.

  If you're shooting RAW you probably have Adobe Photoshop that can also import your photos.

  See what version of RAW in your Photoshop.

  http://helpx.Adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  See what needs your camera RAW version.

  http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html

  Most versions have a camera raw update and if your version cannot open first you can download the free Adobe DNG Converter that will convert your raw (digital negitive) .dng files

  If you like working with raw you impossible to open and download it when even because it supports more than 350 models different cameras so if someone sends you a raw file, Photoshop you can convert.

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5389   It's the latest Version

  I hope this helps!

• Size of the file Windows 8.1

  What size Windows update 8.1? I ask because I've only got about 3 GB of free space on my W510. The store said that the update is 2, 84 GB but that is just for the installation?

  After update there will be more space in fact. Maybe you could get rid of chrome, give the day and then get chrome back after the update?

• I know it must be simple, but how can we change the size of text on windows 8 and the police

  
  

  Hello

  If you mean when you use a browser, you can use the following commands.

  Hold down the CTRL key and press - (less) to reduce the size of the page.

  Hold down the CTRL key and press + (plus) to increase the size of the page.

  Press and hold Ctrl and press 0 (zero) to return to the default size.

  Kind regards

  DP - K

• Swap OEM Windows 8 and Windows 8 Pro upgrade

  Hi everyone, is it possible to Exchange my old laptop (upgrade Windows 8 Pro) and my new laptops, operating systems (Windows 8 OEM)?

  If so, how would you please?
  Thanks in advance,
  Matthew

  If Windows 8 OEM is preinstalled on the new laptop, no, you can not transfer it to the old laptop. Windows 8 OEM is tied to the computer first that it is already installed. You can reinstall the original license that accompanies the old laptop Windows 8 Pro update currently installed on and then upgrade the new laptop for Windows 8 Pro.