Size of the JPG files are really big? Changed to CC worm 2015.

Similar Questions

• How to reduce the size of the jpg file, not the size of pixel?

  I prepare images for the web and I really have 2 questions: one on gifs and the other on the jpg files.
  My standard procedure is to reduce the image to the desired at 600 dpi pixel dimensions
  It gives me a little crisp image. can I use this what if the file size is quite low (I try for less than 600 KB) or convert to gif with the save for Web and devices.

  Here are my 2 questions (I'll count this solved with each answer)

  (1) when I convert a gif that I have 4 boxes: one with the original size, the other 3 with options but, often, the options are too low resolution for me how can I change my 3 options starting with a higher res gif?

  (2) if I try to reduce the size of the jpg in the image size box I put the lower resolution (400, 300), which reduces the pixel dimensions and the size of the file, but I don't want to change the pixel dimensions. If I reset the dimensions in pixels to the size I want, even if it is a lower resolution that the file size does not change. How to reduce the size of the jpg file using only the resolution, the pixel dimensions not?  PS I tried to play with the checking and unchecking the 3 small boxes (scale of styles, constrain the proportions and re - sample) but nothing has worked.

  GIF is not a type of large file, especially if you want a sharp image. What are the dimensions of the pixel?

  For the web, it is immaterial that the dpi is, only the last pixel dimensions, so once you have that you want to use 'save for Web and devices' and you can reduce quality - 100% being the maximum and 0% being the lowest. I wouldn't save anything less than 55%. For an image of 600 KB, the size must be large enough.

• When I load a .jpg file to 'My pictures' one '. the jpg.files folder is automatically created.

  This also happens if I copy the folder that contains the .jpg files in "my pictures". It does not occur if I load the .jpg files on a disc of external data storage.

  The PC is a Sony Vaio VGN-FW53GF, Windows 7 Home Edition has been pre-loaded when purchased from the merchant. I've upgraded to Windows 7 Professional immediately after purchase.

  If I delete the '. jpg.files' C drive - "My pictures", I noticed that the '. jpg.files' are re-created.

  I don't know any 'file settings' to stop this behavior.

  Hello

  1. this happens only with jpg files?
  2. you use "Vaio content analyzer" or something related to the "Photoshop CS / elements"?

  Check the following suggestions and.

  Method 1:
  Open Vaio content analyzer, go in settings and uncheck the three options.
  1 video analysis
  2 image analysis
  3. analysis of music
  
  Method 2: Run a full scan using the Microsoft Safety Scanner.

   

  Refer to this link:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• How to limit the size of the jpg in 300 Kb?

  For example

  Limits the size of the JPG file using the function SaveForWeb marked.

  Sorry

  I made a mistake in the EnregWeb function

  Replace it with

  function EnregWeb (filename, quality)

  {

  var options = new ExportOptionsSaveForWeb();

  options. Quality = quality;   Start with the highest quality (larger file).

  options.format = SaveDocumentType.JPEG;   Or it will default to the GIF format.

  docRef.exportDocument (file (filename), ExportType.SAVEFORWEB, options);

  }

• Size of the target file too big?

  Hello
  
  We have an interface that takes a Source file-> transformations in the transit area-> and provides a target file output.
  
  The problem is that the target file is too much than it is supposed to be.
  
  We have 'truncate' Option is enabled, so its no duplicates...
  
  We believe that it is the physical and logical target defined lengths for files.
  
  We believe that the logical length is far too much cause substantial 'spaces' between the columns of data, thereby increasing the size of the file.
  
  We originally the logical length for data columns 12 and got the following error message:
  
  Overflow error arithmetic digital conversion to digital data type.
  
  When we increased the logical length between 12 and 20 interface run fine without errors. But now the size of the target file is simply too large 1:5
  
  Suggestions to prevent these additional places in the columns target?
  
  Enjoy your entries!
  
  Thank you

  Hello

  usually, you need to know the length of your data. If you want to be sure you could put source really big file as logical definition, than to use a cast in your box waiting (ex number (12.3)) then your target

• The backup files are smaller in size after ACS ACS 5.2 to 5.3

  After ACS upgrade from 5.2 to 5.3 we have noticed that the backup files are significantly smaller in size. They were for example before the upgrade:

  285633099 2011-10-23 22:01 Meduza-ACS-111023 - 2200.tar.gpg

  285809254 2011-10-24 22:01 Meduza-ACS-111024 - 2200.tar.gpg

  And after the upgrade:

  124234429 2011-10-25 22:00 Meduza-ACS-111025 - 2200.tar.gpg

  124234425 2011-10-26 22:00 Meduza-ACS-111026 - 2200.tar.gpg

  What could cause this behavior?

  How can we be sure if the backup files have been regular after the upgrade?

  So what I wrote is true, but does not apply in your case

  I think that there are also a few corrections that reduce the size of the transactions table. GST files relate to records associated with configuration changes and manage notification of these secondary changes, and run-time components. Transactions are stored in the configuration database, but contain no configuration data.

  5.2 what they have not well cleaned and it has improved to the point 5.3.

  Impossible to find all the CDETS at the moment, but here's an example;

  CSCth78269 Table ACSTRANSACTIONS is not properly cleaned during bulk operations

  As you can see it before the upgrade that the size of your backup file has been more and once the size of constant upgrade

  I think you should be good. Only way to confirm 100% is to restore data

• When I import TIF and JPG with the same metadata files, only the TIF files are imported. How can I change this?

  I imported and renamed TIF and JPG files with the same metadata about the date and time of the recording. Only TIF files are imported, the JPG files remain unimproved. So I in 13 Finder e. g. image files in the same folder where Lightroom is only 10 files. Ideas for the resolution of welcome!

  Thank you

  Disable the option Preferences > General > process files Next To Raw files as separate Photos JPEG.  Then again an import.  It appears that, in this case, LR consider a TIFF image to a file "gross".

• The CFA (cache files) are too big, can I delete or move to another drive?

  What are the importance of CFA files so I am done editing a sequence? The CFA (cache files) are too big, can I delete or move to another drive?

  Is no need to delete as soon as you restart first they will be generated again.

  You can reinstall them in the preferences and the media.

• How to reduce the size of the PDF file on scanned on my PMX922 docs

  I deal with a lot of documents, and I find that when I scan the docs on my MX922 the size of the PDF file is MUCH larger that the size of the original PDF file. That's what I see (on a document page 2):

  (Received) original size: 11 k

  Default scan (Quick Menu): 1061 k

  With compression high (Quick Menu): 116 k

  The Panel of the printer (res 150): 209 k

  Windows scanning app (150 res): 1495 k

  Scanning from the Quick Menu with high Compression seems to be the best, but it still somewhat adds to the file size. It's a big problem so I dal with many GREAT docs. Several times the size of the file increase prevents me from being able to send files. Is there anything else I can do? Does anyone have any suggestions?

  Hi 1wwjdbro,

  We can set the PDF to HIGH compression option in the utility of digitization of IJ and also select the image digitized transfer compression to reduce the file size of the PDF file. To do this, please follow these steps:

  1. open the utility of scanning IJ.

  2. in the Scan from Canon IJ utility window that opens, click SETTINGS... at the bottom right of the window. The settings dialog box is displayed.

  3. click on the SCAN of DOCUMENT option in the left pane of the window.

  4 in the right pane window, look for the box to COMPRESS SCANNED IMAGES to be TRANSFERRED in the Scan Options section and check it.

  5. then, in the SAVE the SETTINGS section, find the FORMAT of DATA field and ensure that PDF or PDF (multi-page) is selected, and then click the SETTINGS button to the right of the field.

  6. in the window that opens, find the COMPRESSION PDF section, then select TOP from the drop-down list. Click OK to close the window. You will be taken back to the SETTINGS window.

  7. once all settings have been selected in the SETUP window, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen is displayed.

  8. click the DOCUMENT button. Housing starts scanning. Click CANCEL to cancel the scan if necessary. The scanned images are saved to the location of the selected folder previously specified in the SETTINGS... window.

  I hope this helps!

  If you need more assistance, please call 1-866-261-9362, Monday - Friday 10:00 - 10 pm et (excluding holidays) and a technical support representative Cannon will be happy to help you.  There is no charge for this call.

• Size of the PDF forms are higher than expected

  Hi, I seem to have a problem with the file size of my PDF Forms.

  I have created on Adobe LiveCycle Designer ES2 9.0.0.2.20120627 xfa forms and they are all at least 1 big MB which is large enough for an xfa form.

  When I initially create an xfa form, it is around 11-12 Kb, when I add a few items in the shape that it is not too large, 30-90 Kb around, but when I have almost completed my forms it always ends with 1 MB of data.

  I thought that maybe it's because I'm pasting some already created objects from another on a new, but this is not the case.

  Before that, I checked the XML source to see if there is anything suspicious about the forms and I created if I could find something the size of my PDF files.

  I have seen my biggest form who have 15 k lines of XML coding and 1,386 Mb and another with only 5 k lines of XML coding and 1,303 Mb.

  So here, the ratio is 10 k XML encoding is equal to 83 KB. A blank form is about 136 coding XML and is equal to 10 KB.

  When I see other forms that I didn't create, other sources, they are around 300-600 Kb...

  Now I wonder what could be the reason why my forms are so much bigger.

  Would it because I'm not on the side Server encoding?

  Is it because of my Script objects?

  Or because I'm missing something on xfa forms?

  Or, maybe because I don't use Action Builder?

  Or that's what I think, I use different functions, more it grows, perhaps as a result of using these functions, objects of reference?

  If anyone knows what is the main reason for a PDF size XFA form, I would like to know.

  Thank you

  Hello

  the reasons for the large files are generally images and embedded fonts.

  In forms with the default fonts like Arial or Myriad Pro, it is unwise to incorporate fonts in Reader/Acrobat already has the fonts and do not need to be incorporated.

  Only Arial needs about 450 KB in a form.

  If you use images don't embed them, because it means that they get stored as a string encoded in base64 in the XML source instead of a stream encoded flate in the PDF.

  Base64 is very clumsy and needs more space.

• How to reduce the size of the InDesign file?

  I need to reduce the size of the InDesign file without disturbing the properties of output as the option exists in Acrobat "Reduce file size", pl. help.

  Thank you

  ArcRaj

  A simple "save under" erases all information cancellation that could have been implemented over time.

  If you * really positive * want to clean up your file something suspicious, export to INX (or, using CS4 to IDML) and opens. Save a copy of your original file somewhere else first, because this isn't a 100% free error warranty procedure.

  If your file size is always beyond a reasonable limit: you have all images incorporated, rather than as a link? (Just don't do it.)

  You have pictures with a very small (72 dpi) "ppi" real and a high (300 dpi) "effective ppi"? Who can make the images of very large preview - and they * are * included in your file ID.

• Newbie question - the size of the control file

  Hi, people,.
  I am just trying to Captivate 2 and have already experienced the creation of projects with Flash Builder DemoShield and Qarbon viewlet.
  
  I created a demo of the short software - 16 slides, running 90 seconds. The slide background images are screenshots of a web application, captured at 1024 X 744 pixels and 16 colors. Each of them appears in the library under a bitmap of about 3 MB.
  
  I have the preferences of project, the advanced project compression and file options compress the SWF compiled under tension. The SWF file comes out still at 764 KB, what seems terribly important given the short duration.
  
  My question is, what are the best practices to keep the size of the small file in a project of this type? You realize at shallow depth (256?) or try to capture small pieces of color screen, or is there another trick, I don't know?
  
  Thanks for the tips.
  
  -Corbin

  The simplest and the most overlooked are changing the quality of background image from 'High' to 'Standard' - this is actually all that you mentioned, reducing the color depth. This can be done by selecting the slides using the menu "slide > video quality" for change. The highest quality is not always the default, but check on your slides to see. If the project is a Point to be able to convert, for example, the 'High' quality setting is the default...

  If you notice the "purge" of background colors, you may need to increase the depth of color (constant slide "QualitΘ vidΘo") on the slide hit, to cure the problem.

  About your reference to the 'best practice', I recommend a DevCenter article written by Dave Mozealous who at the time was a member of the staff team of Macromedia Captivate. The link is here .

  Hope this help you get sorted!

  A few final thoughts:
  First, since you seem to be a Flashie, keep in mind that images in Captivate are stored under the direction and displayed as bitmaps, which are much larger files then the vector graphics - have you worked with Flash.

  Second, any image of 1024 X 744's going to be real - real - big; and you who set the size for each background in your Captivate project. Sometimes which cannot be avoided, but often people create great Captivate projects simply because they have not used the product long enough to be aware of what are the problems that can cause. So if you work with a smaller pixel size for your projects, by all means, do it.

• Reduction in size of the SWF file

  Can anyone help me to reduce the size of the SWF file generated by Flex? When I used HTTPService, file lay more large (250 KB). really bad. I've been to limit myself to the use of some components. Help please?

  THE BIG ANSWER IS HERE:

  http://labs.Adobe.com/wiki/index.php/Flex_3:Feature_Introductions:_Flex_3_RSLs

• Update BIOS Qosmio X 300 has failed - the size of the ROM file is incorrect

  Hello

  I use TEMPRO, and he suggested to update my BIOS.
  I downloaded the file and run the Setup file. Unfortunately, it says "the size of the ROM file is incorrect.

  This means I m doing wrong? or I have the latest BIOS in my system.

  Please advice.

  Thank you.

  Hello

  First of all I don't do everything what said Tempro!

  Secondly, this message was posted here in the forum several times and if you are looking for the size of the ROM file is incorrect, you would find that:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=120455
  and this, for example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=73284

  The problem is that you have unzipped the Cabinet correctly!

  In any case, I think that it s not useless to put anything, if the laptop runs without problem!

• Modification date in the jpg file properties menu

  My Nikon image download went well, but 4 of the images have the wrong date on them when they were taken.  I think it was off on the camera somehow.  So, when I view it in the Microsoft folder, they are out of use.  Is there a way to change the property case created date on some images in the large folder?

  To change the dates of file or folder, you will need a 3rd party program as freeware "Attribute Changer.
      <>http://www.Softpedia.com/get/system/file-management/attribute-changer.shtml >

  Remember that sometimes the dates of the .jpg files come the EXIF information stored in the .jpg file and you may need some kind of an EXIF Editor to change that.

  HTH,
  JW