Size size vs paper

Similar Questions

• OfficeJet 7612: Customer size of paper in the Photo Tray feeding

  Hello, I'm at my breaking point, trying to get my printer to print on an envelope of 4.75 "x 6.5". It was working fine until I tried to print another batch the next day, then I continued receives "paper mismatch" errors as well as the printer would try to power on the picture for a reason Board any. I already did the following:

  -J' tried 2 versions customized with overturned dimensions of paper sizes. None worked.

  -Configure the printer to read my custom paper size and also put up on the menu print autoadjust the paper to the dimensions of my new size.

  -Reset my printer, it takes off my network wifi, readded and even reset my documents.

  All other tips would be appreciated, I'm running on a Mac. Thank you!

  Hi bgeyvandova, I suspect this problem may be related to your printer firmware, although there is some other explanation that fits your problem.

  HP offers several measures to help solve the paper mismatch error: LINK

  If you try to update your firmware, you can do it here: LINK

  Please let me know if this, or the guide helps you solve this problem. Thank you!

• Mystery on 1606dn supported sizes of paper for automatic duplex printing

  I'm trying to find out if the 1606dn supports automatic duplex copy legal paper size, but the info is not in the user's manual, which just refers to "that the driver supports. Of course, I cannot and will not install the driver if I do not have the printer, so it's kind of impossible for me to check what paper sizes the driver supports.

  In any case, someone has this information, or is it a secret or something?

  Thank you.

  Hello

  Automatic duplex is supported for legal paper size as you can find targeted by the software's technical reference guide:

  a duplexing unit is installed and manual duplexing is enabled in the driver, the product automatically
  prints on both sides of paper types that are supported for automatic duplexing (Letter, A4, Legal, and
  8.5 x 11 only). For paper types that are not supported for automatic duplexing, a Help message appears
  prompting you to configure the driver settings for manual printing on both sides. Manual printing on both
  sides does not occur automatically.
  

  http://h10032.www1.HP.com/CTG/manual/c01996606.PDF

  See page 224 of the manual above to find how to set duplex printing and paper types are not supported for tasks a

• Affect the size of paper in the drawer - Canon - C5250i

  Dear all,

  IAM a beginner in the canon service. Can someone help me how to set the size of the paper in the drawer of the A3. Error message come together paper guide shown in th illustrion to the right size for the size of the paper.  It has been set by A3 and automatically deleted. Pls find the screenshot A3 is empty.

  

  Hello

  Normally if all what you have to do is open the A3 CD and just slide the paper guide according to your paper size and automatically your machine detects the paper size.

  Please note that if he ' paper stuck between the State and the size of CD detection switch which is

  before the State when you slide the paper CD with impatience, size detection can be NGOs badly displayed Control Panel.

  Hope this will help you.

• I have XP I have down loaded the update for Kodak printer 5300 now will not work. It is said to use advance dot placement mode size of paper by a select line

  I down loaded the 5300 Kodak down load nd now the printer works well not. It is said, to use advanced point positioning mode select a paper size by a line and the paper tray

  Hello Forrestar,

  Thank you for your message.  We will try to remove the software that you have installed, and then reinstall the latest version of the software for your device.  Did this update also includes a new driver?  If so, you could try to restore your driver to the previous version.  Please let us know so that we can help you more to get this problem is resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Printer LaserJet 1606dn - cannot set A4 size to "paper available.

  I use a P1606dn printer; OS: Windows 7

  I appreciate if someone here can show me how to set the size of A4 paper like the picture below

  Although I tried to define the preferences/PaperQuality/print size: A4 and this printer for the latest firmware and driver update, there is no change.

  Accordingly, the document is only printed in letter size, but not that she was the defined as A4.

  Bingo! Uncheck 'Scale content for A4' option in Word format (Option/advanced/printing), it will be resolved.

  I take this great surprise why I have no problem without uncheck this option when printing from another old printer type (i.e. 1200, 1160).

• Only one size of paper in the printer settings

  I have a printer OKI C5100 when I go into its properties it only shows the size of A4 paper.  I tried to do a custom papersize of 8.5 x 11, but it will not print to it and generates an error.   I use the same driver that uses another user on a similar computer and shows them all standard paper sizes.   I tried emailing help OKI, but got no response.

  Anyone have any ideas on how to get the printer to display all standard paper sizes.  Currently, I'll have to start Virtual XP and print it from there so he could work right.

  I downloaded the driver and installed. I can confirm that only one paper size appears in the list. As you said, there's a place to specify a size custom; However, I can neither confirm nor deny the generation of a printing error, when it is used because I don't actually have the connected printer.

  I checked the specifications of the printer that I could find online. The printer uses GDI (windows Graphics Device Interface) for printing. (These printers are sometimes called 'printers based on the host windows or "Windows printing system"). This makes it difficult to find a driver for a printer that is emulated. His language native printer is PCL or Postscript. On the other hand, the C5400 is 5th PCL compatible 5th HP PCL driver would be a good game - but not for the C5100.

  1-800-OKI-DATA
  (1-800-654-3282)

  E-mail address is removed from the privacy *.

  For the moment, I see no way I can be of further assistance. I'm sorry.

  Tom Ferguson

• Photoshop, do not print correct size of paper

  I have an Epson WF-7520 and last week when I try to print from photoshop - any size, I created the new page layout (11 x 14, 11 x 17, etc.) it prints the work 8.5 x 11.  I know that it is a problem with photoshop because my illustrator program print to the specified paper size.

  I tried everything in my power - there must be a gift I messed around with makeup that happen... Any help is much appreciated please!

  Go to the Epson website and download the latest printer driver from the Mavericks for the Epson WF 7520 and start its installation. Software printing would not have been compatible Mavericks.

  If that's not solve this problem, Reset the OS X printing system (this is a link to the instructions from Apple) and reinstall the Epson printer driver.

• the paper size, and paper also prints the profile color inkjet

  I intend to use an inkjet printer to print at least one (or more) copies of a drawing of YOUR CONTINUOUS created in Ps CC 2015. I have several questions about the TYPE of DOCUMENT and the ADVANCED OPTIONS:

  
  

  1 Wkind of hat of paper do I need to buy, and should I use one of the presets U.S. PAPER?

  
  

  2. If I don't want to design to BLEED on paper, should I create the design that is smaller than the HEIGHT and WIDTH I choose (e.g. would allow a larger size such as 8.5 x 11 for the margins between the edge of the paper and the design itself)?

  
  

  3. is it true that inkjet printers are usually set to 240 and, therefore, the image of RESOLUTION must not exceed (eg. something higher is too much data for the printer to process in a reasonable period of time and there is no difference in quality anyway)?

  
  

  4. should I work in RGB mode and CONVERT them to CMYK when I finish the design?

  
  

  5 should I use the default PROFILE of COLOR RGB (sRGB IEC61966-2, 1), Adobe RGB (1998), the "color management this document" option, or some other?

  You'll want to experiment with the printer.  Save copies of the file in separate RGB profiles as I explained in my post.  You will be surprised on the different color prints, you will be able to achieve.  As you work in a workspace 'closed circuit', you can print RGB strictly.  This will allow a wider range through the barrel.  Certainly use color management in the print driver.  For what is the resolution of the image, use the 140 to 150 pixels per inch.  No interest to enter in the halftone screening technology platform.  Suffice it to say, 300 pixels per inch is unnecessary and too much data for inkjet.

• Script to place an image in different sizes of paper!

  Script to place an image in documentdifferent sizes. Hello all, greetings to all. There is a possibility hereget a nice script that reposition an imageinserted in the document to make it encacheperfectly in sizedocument independent edges? With this feature, I'll be able to create severaltypes of frameworks, effects with mascaras etc... and sopower gives a nice streamlined in my work.

  Exemplo:

  1458482592 - YouTube video

  Please try this version.

  #target photoshop;
  app.bringToFront();
  
  main();
  function main(){
  if(!documents.length) return;
  try{
  var doc = app.activeDocument;
  app.displayDialogs = DialogModes.NO;
  var strtRulerUnits = app.preferences.rulerUnits;
  var strtTypeUnits = app.preferences.typeUnits;
  app.preferences.rulerUnits = Units.PIXELS;
  app.preferences.typeUnits = TypeUnits.PIXELS;
  var aLay = doc.activeLayer;
  doc.activeLayer = aLay;
  if(aLay.isBackgroundLayer) return;
  if (aLay.kind == LayerKind.SMARTOBJECT){
  aLay.resize(100 ,100,AnchorPosition.MIDDLECENTER);
  }
  var docWidth = activeDocument.width.value;
  var docHeight = activeDocument.height.value;
  var LB = activeDocument.activeLayer.bounds;
  var LHeight = LB[3].value - LB[1].value;
  var LWidth = LB[2].value - LB[0].value;
  var percentageHeight = ((docHeight/LHeight)*100);
  var percentageWidth = ((docWidth/LWidth)*100);
  activeDocument.activeLayer.resize(percentageWidth,percentageHeight,AnchorPosition.MIDDLECENTER);
  align( 'AdRg');
  align( 'AdBt');
  }catch(e){
  }
  finally{
  app.preferences.rulerUnits = strtRulerUnits;
  app.preferences.typeUnits = strtTypeUnits;
  }
  };
  function align(method) {
  activeDocument.selection.selectAll();
     var desc = new ActionDescriptor();
             var ref = new ActionReference();
             ref.putEnumerated( charIDToTypeID( "Lyr " ), charIDToTypeID( "Ordn" ), charIDToTypeID( "Trgt" ) );
         desc.putReference( charIDToTypeID( "null" ), ref );
         desc.putEnumerated( charIDToTypeID( "Usng" ), charIDToTypeID( "ADSt" ), charIDToTypeID( method ) );
      try{
     executeAction( charIDToTypeID( "Algn" ), desc, DialogModes.NO );
     }catch(e){}
     activeDocument.selection.deselect();
  }; 
  

• Default size of paper in the print preview

  Mode legal print preview, I changed the format of paper and now it is the default value. How can I get the default back to letter format and keep so I don't have to change each time I print? Here also the predefined default settings for ink black & white - what should I do?

  You should be able to reset it in the print window, and then select Save current settings as preset.

• HP Photosmart 7260, Windows 7 64-bit, error when changing the size of paper in printing preferences

  Driver HP Photosmart 7200 Series installed (61.53.25.9) for printer HP Photosmart 7260 on HP ProBook 4270 s running the Windows 7 64-bit operating system. I have a few packs of paper HP Everyday glossy 4 x 6 (without tab) to print photos. When you attempt to change the format of 'Photo 4 x 6' paper on the printing preferences > tab paper quality, Windows Explorer crashes. Please help me solve this problem. Thank you.

  

  Indeed, I can reproduce the exact behavior even with Windows 7 64 bit.

  Add another driver that should solve problem withut wasting any use of the feature:

  Click on add printer and select the USB port.

  While the list of printers, click Windows Update and leave a few minutes up to that list once again displayed.

  Under HP, select HP Deskjet 6980 and cmplete configuration.

  Now try printing using the driver 6980.

  Please let me know of any changes,

  Shlomi

• Paper size error: paper selected in the printer driver does not match the study

  HPofficejet 7500 E910

  don't know what you mean

• Sizes of paper by Officejet Pro 8000

  OfficeJet Pro 8000 is satisfactory legal communication, 8 1/2 x 14?

  http://h10010.www1.HP.com/wwpc/us/en/SM/WF06b/18972-18972-236251-1156654-3328074-3760400-3760401-3760404.html

  Yes

• OfficeJet 7612: Custom paper selection OfficeJet 7612 size?

  I implemented a custom size (11.5 x 10.0) in Windows 7. Suite insttruction of this site on the definition of this size, I am responsible to go in displays preferences-paper/quality-advanced and set the size here in a drop size. However, the 7612 preferences-paper/quality-advanced doesn't have a paper size option in the Advanced window. My custom size does not appear in the list of paper sizes in paper/quality window. How to choose a size for a 7612 custome?

  Hello

  The HP Officejet 7612 does not support a custom paper size.

  As cosument explains, some HP printers to print on paper of custom in Windows format. Go to create custom in Windows 8, Windows 7, Mac OS X paper sizes learn more.

  For the specific model, a custom size printing is not supported under Windows you will find listed on his record in the specification of paper output section:

  

  http://support.HP.com/us-en/document/c03618348

  Kind regards

  Shlomi