GPIB crashing when running labview

Similar Questions

• Excellent black screen when running LabVIEW 12.0 on Windows 7 (32 bit)

  I've migrated just a LabVIEW 8.0 on a Windows XP-based computer program to work with LabVIEW 12.0 on a Windows 7 computer (32 bit).  I've converted all the Excel 2000 (.xls) files in Excel 2010 (.xlsm, .xlsx) files.  When I run the program LabVIEW, I notice that the Excel icon that appears is "yellow" for a 1/2 second intermittently.  This sometimes causes the LabVIEW program hang up.  When you hover over the icon, you do not see the Excel file.  All you see is a black (or white) screen where data must be and the file is not closed properly.  If I close the file, then the LabVIEW program errors.  I will attach a screenshot.  This program retrieves data to Oracle every 20 minutes to update products in the wafer fab queue.  It works 24 / 7.  I went in Excel and set Options, centers of confidentiality, macros settings - enable all macros and checked access approved to the the_VBA project object model.  (Suggestion of our IT tech).  When I restart the LabVIEW program, it works very well.  When he is going to update the first time, Excel goes into vapor lock!  (white screen).  I downloaded the TDM Excel Add - In, but the notes said it was already installed on LabVIEW 9.0 and later versions.  Any ideas?  Mark

  
  

• Windows 8 crashes when running 'find the hardware changes' in the Device Manager, requiring forced stop

  I just installed Windows 8 Pro on a system that were running Windows 7 without problem.  After completing a clean Windows 8 Pro Setup program, I went from hollow driver installation, but found the package to install for my card its caused Windows 8 Pro drivers to lock up and become completely numb.  I had to force a shutdown by pressing the button for 4 seconds.

  Trying to solve the problem, I found that manually install the drivers through the device manager didn't cause any problems.  In addition, installation of the drivers available through Windows Update also worked without problem. However, these two methods fail to install parts of the pilot training included him.  Then I have to uninstall the device from the package of drivers again.  I uninstalled the sound card via Device Manager and selected "Delete the driver for this device."  When I followed this with a "Scan for hardware changes" again the list my sound card, I have found that Windows 8 Hung again.

  After trying other options with no resolution, I tried to reinstall fresh Windows 8.   To exclude a possible problem with Windows 8, I opened Device Manager, as soon as I could after installing Windows and ran "find the hardware changes.  New Windows 8 freezes.  I can't place blame on post installation any software or driver.  This seems to be a problem with Windows 8 itself.

  A final note, sometimes "find the hardware changes" will actually work, but most often it forces the system to hang.

  Does anyone else have this problem?  Can anyone provide assistance? (chart below for comparison)

  Processor: Core i7 3770 k

  Motherboard: MSI Z77A-GD80

  RAM: 16 GB

  Video: GeForce GTX 680

  Audio: Creative Sound Blaster Recon3D

  HARD drive: 1 x Corsair Force SSD 3

  RAID: 3 x 1 TB RAID 5

  It seems that I am victim of dynamic ticks.  Research on my question, I have found several discussions around the ' net for crashes/freezes random in Windows 8, but none of them appeared to agree to my problem.  However, they all had the same solutions.

  Run the following command in a command prompt to disable the dynamic ticks.

  bcdedit/set disabledynamictick Yes

  I thought that I have that would give a shot, and it worked.  I wrote this answer, I also found that there is a recent update of the BIOS for my motherboard which indicates "Support Windows8 feature."  With the new BIOS applied, I was able to turn dynamic ticks and have been broadcast since w/o freezes.  I also managed to install all my drivers.  Anyone else having this problem maybe try updating the motherboard BIOS, otherwise try the above command.

• Forms crashing when running Oracle Forms script functional in OTM

  Hello
  
  We try to run Oracle Ebiz forms related to scripts of functional test developed in Open Script in Oracle Test Manager.
  
  Exactly when the forms starts, the JRE is get crashed, and the script fails. What could be the reason.
  
  I added the path class in Control Panel for the JRE Java that comes with OATS and active 1.6.33 version that works quite well even when script is run using OpenScript, and not through OTM.
  
  Also, in windows services we have provided valid admin credentials to the execution of the service, instead of the user of the local computer.
  
  Any help and insight into this problem would be a great help.
  
  Kind regards
  Nishant
  
  Published by: 958623 on October 29, 2012 05:09

  Please try "-formsft.startup_timeout 120" and let me know.

  Thank you
  Rajesh.

• Lightroom to crash when running Photoshop?

  I need help!  I am running Windows 7, 4 GB RAM.  When I have the two Photoshop CS4 64 bit and Lightroom 3.3 open 64-bit Lightroom crashes.  At the point where I have close Photoshop, Lightroom is very well.  This is something that has just begun, I use to work with both of them all the time.

  Thanks in advance!

  Web-Weaver wrote:

  First of all, did you really say PS CS4? Because the PS CS4 and LR 3 are not totally compatible, and you get all the features of LR with CS4.

  I don't know if CS4 will cause LR to crash. I worked for a while with CS3 and LR 3 and the two worked, except that CS3 cannot open RAW images processed in LR 3.

  WW

  It is rather bad information. LR 3 works perfectly well with the CS 4 and CS 3, indeed any version of PS. The only difference between the use of older versions of PS with LR 3 with a CS 5 is that the RAW file must first rendered by LR, rather than be rendered after the CAB using CS5 so that changes made using process 2010 to be embedded in the file. There is no incompatibility once rendered.  For the vast majority of users of the order in which the file is returned when opening PS too is irrelevant.

  Don't bother reinstalling LR as it not make any difference. Explorer the real causes of the accident, the Task Manager allows to watch what is happening. It is likely that you have too many applications running and not enough available RAM. Get your hard drive configuration sorted can help, but make sure first that you do not have many things running in the background. You have enough free space on your hard drives and they are fragmented. St your swap file on a separate drive on the OS drive, don't let it be handled by windows and attach it to the amount of 1 1/2 times the physical RAM installed.

  Set the cache of RAW for the two bridge and LR in the same place, a separate drive him and if possible give a room, 50 GB or more.

  Set the catalog on a separate drive fast as well, all will help with performance.

  Turn all windows stuff that slowing down things and the causes of the accidents, indexing in disc is a real problem. Make sure your anti-virus software is not check the LR catalog and disable any background incremental backup software you may have running.

  Your system will be perfectly adequate to run LR and PS, however, you can only open one file at a time in PS, open files multiply at the same time can be bad news with limited RAM.

• help, the pc crashes when running a game

  Hello

  every time when I play a game, after 30 minutes + / my screen goes black and nothing seems more answers (except Skype continues to operate)
  After reset pc I get this message
  BCCode: ea BCP1: 89B99C80 BCP2: 89C9A450 BCP3: 8A5EA9D0

  BCP4: 00000001 OSVer: 5_1_2600 SP: 3_0 product: 768_1
  When it was held that it did not prevent
  all my drivers are up to date
  I have installed windows XP (32-bit)
  My system configuration:
  CPU: AMD Athlon 64 X 2 6400 + @ 3200 MHz

  RAM: 4096 MB (4 x 1024 DDR2-SDRAM)

  Video: NVIDIA GeForce 8800 Ultra
  Motherboard: MSI 790 x chipset
  my search did not get me anywhere if any help would be great

  Hello

  This problem occurs if the graphics card is taken in an infinite loop while waiting for the video hardware to become idle. This may indicate that there is a problem with the video hardware or that the graphics card cannot program the hardware correctly.
   
  I suggest that you follow the methods described in the Microsoft KB articles and check:

  Error message in Windows XP: "STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER".

  http://support.Microsoft.com/kb/293078

  Error message "Stop 0x000000EA" when you run video-based programs

  http://support.Microsoft.com/kb/314215

• Firefox crashes when running. Resettlement, safe mode and profile all make them appear "Firefox has stopped working" until it never opens a window

  I tried all the solutions on other items. I uninstalled, including profile information, then deleted all the files of Mozilla, rebooted, then re-installed and got exactly the same problem.

  I am running Vista 64 and the latest Firefox.
  I have run different virus scans and tried to uninstall all the Flash stuff.
  IE and Chrome, that both work, but really slow compared to how fast Firefox ran (although it worked), so I would like to resume.

  I have no information of actual error, but what I do is below...

  Signature of the problem:

   Problem Event Name:	APPCRASH
   Application Name:	firefox.exe
   Application Version:	24.0.0.5001
   Application Timestamp:	522fd29f
   Fault Module Name:	ntdll.dll
   Fault Module Version:	6.0.6002.18881
   Fault Module Timestamp:	51da3e00
   Exception Code:	c0000005
   Exception Offset:	0002abe4
   OS Version:	6.0.6002.2.2.0.256.6
   Locale ID:	2057
   Additional Information 1:	3f21
   Additional Information 2:	b21eec1522c4859456611373b2bc31d4
   Additional Information 3:	c437
   Additional Information 4:	4fcda050134e1df0038b45ec0bc068b3
  

  May also make a malware with some malware check, analysis of programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• The SoC Xilinx architecting 7010 is added to myrio, my question is why? Which task is done by the CPU and which task is performed by the FPGA in myrio when running LabVIEW.

  Looking myRIO Xilinx architecting-7010 SoC I am bit inntrested in the workflow for the GS. How does the bennifit myRIO use a system on chip instead of a regulare CPU and FPGA not in the same chip.

  4 way could there be to manage a VI?

  With FPGA and RT (CPU)

  Only of FPGA

  Only RT

  only the windows

  I am comfused, is it any good article/doc describing this?

  I found the image in a PowerPoint on the www. -What the task split like this betwheen the CPU and FPGA?

  Hello

  Please see this link. This can help you understand the architecture of RIO, and there are many whitepapers available in ni.com

• Screws disappear from the windows taskbar when running

  Hello!

  It is a strange happening in the world when running LabVIEW 2014 or 2015 on Windows 7.  When the VI property-> the appearance of the window-> Custom-> customize-> box 'allow to minimize the user window"is unchecked the VI disappears from the taskbar when running.  It is moderately annoying, anyone know if there is a good reason for this behavior without papers?  Other than to keep the box checked, is there another way to prevent that from happening? I don't really feel like swapping through all possible combinations. :-)

  Thank you!

  C

  In fact, it's documented behavior.  Access the help file for this dialog box properties.

  There is a note that says:

  

• LabVIEW crashes when opening the project

  Hey guys,.

  I'm running into an interesting issue where LabVIEW crashes when you open a project. This is the second time I encountered this problem on the same project. To get around it the first time, I simply deleted and remade my project, but since it happened again, I need to find a way to debug it. The symptom is that LabVIEW will crash at the opening of the project (sometimes I can see the screen "loading the vi") with no indication that the accident occurred. It does not even launch the reporter of the error, the process just dies. Anyone know how I can go about debugging it?

  xkenneth86,

  What version of LabVIEW? Have you had previous versions of LabVIEW on your computer? You can attach a screenshot of the accident?

• LabVIEW crash when calling matlab script?

  My version of labview 8.6, Matlab is 7.1. In the beginning, I always get error 1047 when calling matlabscript, then I downloaded recommended matscript.dll (7.1.0.2) and replace the original one (8,6) with this one. 1047 error does not happen. And the matlabscript code can be executed. However the labview crashes after that Matlab is called.

  In fact my matlab file works well. At the end of the matlab code, data must be included on the photo. And it is. But after the image is shown, my labview breaks down, and when I reload the labview, it only invites me 'the last time you run labview, it is not stopped normally. The following files are automatically saved and are available for recovery.

  I used same monitor recommended treatment. But I can't find any reason. I've removed the scriptnode output, it does the same thing.

  anyone has a suggestion. I really appreciate your help.

  Jessie

  I would say the matscript DLL that you copied on the removal and run a repair on the LabVIEW installation to see if that replaces the missing files.

• Mail crashes when you delete an email, sparking a boot, running El Capitan on a MacBook Pro 13 inch, mid-2012.

  Mail, Version 9.2 (3112), crashes when you delete an email, sparking a boot on a MacBook Pro running E Capitan, 13-inch, mid-2012, is 2.9 GHz Intel Core i7 processor, memory is 8 GB 1600 MHz DDR3 and trash is clear. It's frustrating! I was unable to copy a part of the final report to include and cannot find where are stored copies of the reported errors. Thank you!

  Start Safe Mode removes the system caches that can help.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key. You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  Then try to delete an e-mail message.
  

  On Safe Mode

• LabVIEW crashes when you open a file

  I have a simple vi which has aims to build a custom set of labview applications.  At times the .vi is corrupted (with no rhyme or reason).  After the vi get corrupted it won't open in labview and the following error message appears in the windows event viewer.  Note that any other vi will open ok after that is the case.  Any ideas on what is happening with the .vi in question?

  LabVIEW information: error: 404 "not found" to "example of national instruments/labview/nor finder/1.0/niexamplefinderserver", file "c:/program files (x 86) /national instruments/shared/or Server Web/www/national instruments/labview/or example finder/1.0/niexamplefinderserver ': can not access the URL.

  Very simple.  He did what I told it to do.

  The BuildCreator.vi is set to run when open. When run, the last thing it does is to quit LabVIEW.

  So what can you do about it? Open a new VI. Place Creator.vi to build on the block schema as a sub - VI. Then open the Subvi.  It opens in edit mode.

  Lynn

• LabVIEW 2009 linux crashes when editing a control, or a constant of resources VISA

  Linux crashes when I click on a constant resources VISA (block diagram) or control (front).  This happens on LabVIEW 2009 SP1 32-bit for Linux on CentOS (similar to RedHat 6.3) 6.3.  I have updated drivers VISA 5.1.2 and that did not help.  Thanks in advance for any ideas of five Linux guys out there.

  Hello Jason,

  My problem has been resolved with LabVIEW 2012.  To answer your question, LabVIEW would crash only trying to select another device in the list.  Thanks for your help.

  Kind regards

  Marvin

• LabVIEW crashes when connecting to NXT

  Whenever I try to connect with the NXT LabVIEW, LabVIEW hangs... I have LabVIEW 2010 and 2011, and it worked until I installed 2011. Can that be my problem?

  Thank you so much in advance.

  Alex.

  Hi ullrich85,

  Did you install the LabVIEW NXT Module 2011 yet? When does it crash when you try to connect? Y at - it no error report that appears when LabVIEW breaks down?

  http://Joule.NI.com/nidu/CDs/view/p/ID/2637/lang/en

  DylanC