Slate 7: not silent keyboard

Similar Questions

• Satellite L20 keyboard & touchpad work not but keyboard works in the BIOS

  On my laptop Satellite L20 not work keyboard and the touchpad and keyboard works in the BIOS, USB ports also does not (USB mouse).

  Can I get the BIOS update file (traditional update on the boot CD, no BONE!)

  Sorry for my bad English.

  If the update of the traditional BIOS is not available on the download page the only way to get it is to contact the nearest authorized service provider. They have all versions.

  But this problem of keyboard and mouse is really strange. can you use if you start the operating system in safe mode?

• 5.1.1 Android silent keyboard

  After upgrading to 5.1.1 I can't do the silent keyboard entries. What should I do?

  On a G4 is in the settings of your keyboard by default under more - I'm sure it's similar or even on 5.1.1 all devices

• (Redirected) AlienFX does not recognize keyboard on x 51

  Hello. I've had this Alienware x 51 for about 7 months now.

  AlienFX had no problem that for a while, but today I had to restore my system to an earlier point in time and it no longer recognizes my keyboard. Wherever I restored the computer, there is no problem at the time.

  I updated the BIOS, uninstalled, and reinstalled the Alienware command center several times, from the CD and on the Dell.com site. Nothing works. It recognizes the office without problems just not the keyboard. He worked an hour ago, but not after restoration.

  Help.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Inspiron One 2320 - USB will not recognize Keyboard (wireless and usb keyboard)

  someone help me please... I don't know what is happening to my keyboard wireless (im using the usb mouse). I can not type. fair play/pause, next, previous flight upward, downward and silent flight...

  Personally, I wouldn't because I think that 10 is better than 8/8.1. I would just use a wired USB keyboard and mouse. Your call.

• a note on keyboard does not... only in logic

  Hi, I posted last month, no responses:

  I use Logic Pro Mac OS 10.9.5, with a midi keyboard/controller 10.2.2 Alesis QX49.

  By pressing the FA #2 note on my Alesis keyboard doesn't play or even fits into the logic.

  This happens in any song logic or instrument.

  However, F #2 and the keyboard plays well in Garage Band. So it must be a logic problem.

  The problem started a few months; This key has played very well in the logic. All other keys are working.

  I see no logical preference, the setting, command, filter etc. of inhibition or associated with F #2.

  Please let me know if any suggestions?

  Thank you.

  RJ

  Open the window controller assignments (cmd-K) (expert opinion) and select the offending message and delete it. Make sure that the learning Mode is power off.

  
  

  Learning mode on

  

  Learn mode off

  

  cmd - L toggle on and outside learning mode, you probably hit sometime.

• voice track is not silent, but some words are not heard.

  I recorded a vocal track, but when I listened to him I discovered that certain words and parts of words are not heard.

  I checked the original Visual track and it is not visually silent.

  What can I do?

  Please help me! It's a big deal for me!

  You have any automation (volume or mute) on this track which could affect the reading?

  When you say "original Visual track" mean that you imported the audio file from the Finder? In this case, what happens when you drag the audio file again to another track?

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• 23.0.1 does not accept keyboard entries

  Since the upgrade to 23.0.1 this morning I am not able to use keyboard shortcuts, type the address bar, search or page box. I tried to open Firefox in safe mode, but that did not help.

  Some have reported that one or more times by pressing F9 + Windows has worked to solve problems with the keyboard does not.

  Alternatively, you can try to restart the computer.

• the numbers do not work keyboard

  numbers does not work on my keyboard (wireless) 1-9 do not have zero work, I Remover the bluetooth keyboard and I'm trying to connect it again, but once again, I now use numbers to configure the bluetooth

  Read this article on the Apple Knowledge Base

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

• Slate 7 not recognized by Windows 7 laptop?

  Hello

  I have a new 7 2801 slate. When I connect it to my notbook with the USB cable I tries to install disks without success. Looking at the harwaremanager it shows other hardware not installed "HP" readers. Updating the drivers is alos does not. Can Haw I fix this?

  Concerning

  Mathias

  Hello MaKru, welcome to the HP support community!

  I found activating / disabling the "USB computer connection" 'device MTP (Media)' to 'camera (PTP)' often makes the device are not displayed correctly.

  This setting can be found here: settings/Storage/Option icon in the upper right (it looks like 3 blocks stacked vertically) / USB connection to the computer.

  Be sure to connect the Slate7 to a USB port on the computer itself, not a hub.

  When I plugged mine, nothing happened. I disconnected, changed the setting to the camera (PTP) and reconnected. He has appeared as a camera, with the DCIM folders available. I unplugged, changed back to the MTP (Media) device, reconnect the computer and Voila! The two sections appeared.

  WyreNut

• Satellite C855 - mouse does not work - keyboard freezes.

  Hello

  I tried several times to call on the long waiting support phone number and no answer (queued for centuries)

  I had a problem since 1 week with my laptop Toshiba as below

  The trackpad (mouse) does not work despite to remove the battery, pressing f2 and FN then f9 and f10 as mentioned in various forums

  Also, the keyboard is blocked completely several times - I checking also tried other things like BIOS - active trackpad

  And finally we have also made the SYSTEM RESTORE to an earlier date when everything was going well on laptop

  Serial number: 2D138575R
  Model: Toshiba Satellite 2F0 C855

  Help, please!

  There are a few options that you could check.
  *-> BIOS update.*
  In the case where there is a new version of the BIOS of your laptop, perform the update on your device.

  *-> System restore / restore *.
  You wrote above you already set the laptop to a previous data, but I'm don't think it is good enough. It s advisable to get the laptop back to factory settings.
  How?
  Using the previous created recovery (disk or memory stick flash) media or using the option to drive HARD recovery (power of the device, press F12 and select HDD recovery)

  Of course the HARD drive running recovery would lead to the loss of data, back up crucial data.

• 2 13 Yoga do not disable keyboard when switching of modes tent/booth

  Hi, I just upgraded my Lenovo Yoga 2 13 10 Windows and the keyboard is not turn off as it should. It turns off in tablet mode, but not in the tent or booth, and it is a problem that I can not use stand as my cell phone goes haywire. In addition, notifications little don't popup when I change mode so I guess it's something to do with not having the app of transitions. Y at - it somewwhere I can download it and see if that's the problem?

  Thanks in advance

  Who has not worked for me, oddly enough. However this morning, I thought I'd try a few different things so finally I finished downloading the 2.0 software of Transitions for Yoga 2 Pro Windows 8 and that seemed to work. Weird, but it was designed for Windows 8 but well, it solved my problem.

• HP envy 15 t-j000 not sensitive keyboard

  Hi all

  I have a hp envy 15 t-j013tx which seems to be essentially just a 15 t - j100 with some tweaks like CPU i7-4702 RESUMES.

  I have a backlit keyboard and I notice that the keys do not always work.  For example, pressing the lower edge QWERTY keys wouldn't do anything.  I have to press dead center and hard so that the registry keys press.  It is very annoying and it slows down my typing because I constantly have to come edit lack of key strokes.  It's like every 5-6 keys, the keyboard will not register this essential feature.

  Does anyone else have this problem?  It's driving me crazy, but I can't use the keyboard as it...

  Thank you

  Benny

  Hi BennyC,

  I see that you have problems with your keyboard and I'll be happy to help you. Check if the filter keys are turned on. One of the functions of the filter keys is to ignore brief or repeated key strokes. The link below will show you how to do this. Click on "Computer beeps when you type" which will show you how to make sure the filter keys are disabled. You can also watch the keys stuck and see if anythings blocks keys.

  http://support.HP.com/us-en/document/c03738933

  Thing that you do is use the Hardware Diagnostic tools to see if there is a problem with the keyboard.

  What operating system do you use?

  Find your operating system:

  http://Windows.Microsoft.com/en-CA/Windows/which-operating-system

  Thank you

• HP Slate extreme: "Not compatible" with many games optimized Tegra.

  I bought the slate 7 Extreme mainly because of its capabilities of game and support this and other devices of Nvidia Tegra. The EVGA Tegra Note was not available at time of purchase, so after learning that the Extreme 7 slate was essentially the same tablet, I decided to buy this after some research. I was excited to test it, so I watched a few games through the Tegra Zone app. I found a number of very interesting research games and he was pleased to read in their descriptions that they have been optimized for processors Tegra (CPU very occupying this tablet) 4. However, when I went to the Google game store, I met with the message: "your device is not compatible with this version. This confused me because, according to the descriptions of games, these games should not only be compatible with this tablet, but they have been specially optimized for such a tablet. I did more research and found that EVGA tablet doesn't have this problem.

  Why am I not allowed to play some games that this tablet is obviously able to run? This question almost defeated the purpose of having this tablet. It is a big problem that needs to be address immediately.

  BTW: These are issues with the 7 Extreme 4400US slate.

  If NVIDIA TegraZone 2 says it's just for the shield NVIDIA platform and another device, then the NVIDIA forum seems to be the most logical place to inquire about this.

  NVIDIA has coded the specific game you are asking about the shield and Mad Catz console platform. They stated that there is no guarantee that it will work on all devices.

• USB ports not recognizing keyboard and the mouse after sleep

  I have a wireless Logitech and mouse keyboard. These connect to my PC (Vista32) wirelessly via a USB plug small heel I plug into a USB port. Logitech called "Unify" which, according to them, is standard to connect devices through a USB port. My mouse and keyboard work fine when I restart my computer, but when he goes to sleep and I me re - wake up there that they do not have. I force power off of my computer because I can't access my account.

  I have ensured that the selective suspend setting in settings usb in advance power settings is disabled. Support Logitech seem unable to help him.

  Hey Sinclair,

  You can refer to this link suggestions and answer us with the State of the question.

  A USB device may no longer work correctly when Windows Vista comes out of standby or hibernation

  http://support.Microsoft.com/kb/928631

  Also refer to this link: How to troubleshoot USB device problems that can occur after a PC that is running Windows 7 or Windows Vista from sleep or hibernation resume

  http://support.Microsoft.com/kb/953367

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I hope this helps.