sleep/wake button Exchange program

Similar Questions

• Cannot restart or refresh my iPhone 7 from the "home" button and the sleep/wake button at the same time

  I'm having difficulty trying to restart and update my iPhone 7 using the Home button and the sleep/wake button at the same time, when I do my phone takes a screenshot of the home screen.

  Should I turn off my Touch ID?

  Basically my home button button and / standby works not together at the same time.

  You need hold the House and turn off the button for 20 seconds, until the Apple logo appears.

• How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do?

  How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do now?

  Looks like a hardware problem (with your home button).  You should probably make an appointment with the genius of Apple on an Apple store near you.  This link can help:

  https://www.Apple.com/support/contact/ >

• When to use the sleep/wake button?

  I'm a little confused on how to better close my 5th generation iPod touch - IOS 9.3.2 - when I finished a session.

  I must:

  1. Let the power down on its own?
  2. Turn off with the sleep button sleep?

  What is "best practice"?

  Thank you!

  Dan

  Whichever you prefer. They both make the same except if you give the key a long wait, then slide to turn off.

  TT2

• sleep/wake iPhone 5 replacement button

  I have a problem: on/standby button does not... According to your iPhone 5 replacement of the Sleep/Wake button program my device is eligible for this program and I bring the product participating provider. I live in Israel, and the provider here is partner/Orange. But unfortunately I learned there that they cannot help me cause they don't support this program... So, what should I do?

  Where did you buy the phone?

• Satellite M100 - screen remains black after sleep/wake

  I just installed Windows Vista Ultimate on my Satellite M100 series.

  Everything works fine, but when the pc is forced into sleep/standby or it automatically goes into sleep/standby mode depending on the time of inactivity in the power settings could not be restored sleep/wake without turn off and restart.

  The blue button is orange and blinking indicating sleep/standby mode. When you press it again, it turns blue and the fan turns on. But there is no display and no response. The only option is to go to market.

  Help, please

  Hello

  What BIOS updated to the latest version?

• Windows 7 "no DNS (or no network) after sleep (wake up) sleep (or Hibernate).

  The purpose of this thread is to understand the expected behavior of the TCP in Windows 7 stack and the cards on the resume from sleep/hibernate - not - display the suggestions that have been posted in other threads.  I also wanted to gather some folklore on this subject in one place...

  It seems to be a group of people having this problem Windows 7 "no DNS (or no network) after sleep (wake up) sleep (or Hibernate)" without definitive duty (or with various) responds to what the issue is.

  Do some reading on this in various places, I see:

  -Suggestions to disable UPnP.  This should be largely irrelevant to the problem.

  -Reset the default router.  Generally, this should not be necessary.

  -Reinstall Windows 7 (ah yes, the panacea for all ills!).

  -Replace DHCP static IP address.  This should not be necessary (considered at best as a workaround).

  -If it solves the problem, it points the finger at DHCP feature / state on the curriculum vitae of sleep?

  -Disable the firewall.  This shouldn't be a problem (why would it).

  -If it is a question, it is likely to be isolated, rather than the majority of the cases.

  -VMWare (or similar) virtual networks.

  -This could be a problem for some people.  It would be useful for anyone who has a problem to confirm if they have VMWare or similar virtualization installed products (who can create virtual networks).

  -Disable the TCP (TCP sliding windows) tuning car.

  -It is possible that TCP auto tuning could be a problem for some people - but - unlikely, it would be a problem for people only on the recovery from sleep mode.  I think that anyone with questions about the TCP (TCP sliding windows) tuning car rather than questions on RESUME intermittent connectivity problems.

  -Some people report improved performance when turn it off this feature.   Report MSFT from 10 x to x 1000 in laboratory performance. conditions.  It's one you need to test yourself to see if it helps or otherwise.

  -NETSH INTERFACT TCP SET GLOBAL AUTOTUNING = OFF

  -NETSH INTERFACT TCP SET GLOBAL AUTOTUNING = NORMAL

  -It works on XP but not on Windows 7?

  -It is fairly widely commented that the TCP stack has been re-written/improved thanks to Vista and Windows 7.  It is not surprising, therefore that problems on Windows 7 that do not exist on Windows XP.  This does not necessarily imply that the Windows 7 stck is bug, just as not all software and peripheral food chain TCP are speaking the language of same/current (in the absence of a better technical description).

  -One wonders, therefore, are only optimizations issues additional tuning and unloading that have been made in the new stack TCP?   How this confrontation with the problems that occur only in the curriculum vitae of sleep/wake extended?

  -Some people recommended prevents the system from voltage of their cards during the standby/hibernation.  Does this means:

  -The card is not dynamic.

  -If the card is allowed to be turned off so there will be a lag between the state saved in Windows and the State represented (none) in the card when the system is out of his sleep (or Hibernate).

  -Perhaps, it's something that needs to be addressed in the functions of battery/sleep TCP in Windows 7 - How to handle/recover the situation when the NETWORK adapter is turned off?

  -If we put the system to sleep, we want to have power supplied to the maps or not (what are the implications)?

  -People have the same problem for the hibernation?

  -If there is a problem of State related to the cards, would be - why, in some cases of people solve the problem by disabling optimizations that involve some treatment being given cards instead of being carried out using the processors.  If it was kept in the processors, we have consistent state on the resume (as opposed to cards)?

  I think what I understand of MSFT is here:

  -What is the behavior designed in the stack revised to ensure a consistent state between the adapter, battery, previously obtained DNS, DHCP settings, etc., the curriculum vitae of sleep/wake extended.

  -Unlikely connections persist across sleep/hibernation - so are they remind/re-restored?

  -Windows 7 has more work to properly manage this for cards that - are - power off during sleep?

  -Is - it a requirement of MSFT at this time for an own CV, the card must stay lit?

  An exchange of views on how this is supposed to work for MSFT would be useful.  Then perhaps hundreds if not thousands of people facing this issue can understand why it happens and how they can solve.

  [upstairs]

  Thank you for spending time and energy on it. I had a frustrating to deal with this problem, but - finally, disable virtual network cards seems to have helped.

• Sleep/wake functioning does not properly

  I recently bought an iMac 27 '' new. I have problems with sleep/wake function. It works erratically. He'll still go to mode 'sleep' when I choose that, but about 60% of the time it won't wake up when I want that. I have to turn off the power and restart to power the computer. I got off the computer rather than put in mode 'sleep'. Does anyone have any ideas on how I can fix this? I've updated to the latest version of El Capitan and run the appropriate version of the OnyX, but nothing seems to help.

  A secondary issue is with an external hard drive. I have three connected to the computer. One and always the same, 'evil' ejects itself randomly. It appears and disappears at will. Does anyone have ideas on this?

  Thanks for any help that anyone can give.

  Reset the SMC. Choose the appropriate method.

  https://support.Apple.com/en-us/HT201295

• Every time when my comp. goes to sleep, wake up I have to sign in. How can I remove the extra sign in?

  Every time when my comp. goes to sleep, wake up I have to sign in.  How can I remove the extra sign in?

  David,

  See my reply in the thread How to unlock a user on my computer?

• HP LaserJet 200 colorMFP M276n slow or does not respond after sleep/wake

  Hi all

  Bought a printer HP Laserjet M276n colorMFP 200. Set up the printer and it's printing of windows and mac computers (also via the local area network (wireless) and even the iPad and iPhone) and scan directly to the pc and mac. Also configured the network folder scan function. Works like charm.

  But... When I try to do something after the machine is in "standby mode" everything goes wrong.

  1 - printing takes longer path to front.

  2 - operation of the toutchscreen (for scanning to network folders, or to photocopy anything) is not feasible. If the machine says it takes about 10 to 15 seconds per order. Sometimes the machine does not respond.

  3 - wireless devices sometimes have trouble with the connection to the device.

  4 - access to the machine via the web interface content (yet) is slower, if not impossible.

  When I manually reboot the printer (using the power button) the machine works fine again.

  But I can't immagine what how HP intends to use the machine.

  Anyone know how to solve this problem, or if it could be a configuration error during my dissertation?

  Also is it possible to disable the sleep mode at all?

  Thanks in advance.

  Kind regards

  By Duringshoff

  The program installation/Specs:

  The printer that is connected to a switch. Connected to the router (wireless).

  Printer is not directly connected to any computer over the network.

  On the printer, I put 'Sleep delay' to '1 hour '.

  On the printer, I set 'Auto Power' down on '' never. ''

  MacBook Pro 13 "under OS X 10.9.1"

  Windows PC and laptop. Both running Windows 7 (Service pack 2, I think)

  IPad IOS 2 7

  IPhone 4 running IOS 6

  router: Cisco EPC3925

  switch: Netgear GS108

  Thanks for letting me know Per_Duringshoff.

  I checked online and the latest version of the firmware is 20140521. But it is not a list for 10.9 update.

  10.8 has the firmware update available. If you have less then 10.9 another Mac or a Windows computer, you can run the update of the firmware in this way. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Let me know when had time to try the steps listed and if it helped.

  Have a nice weekend!
  Thank you.

• Dell place 8 Pro 3G - Sleep / Wake Up questions

  Hello

  A few days ago I bought the Dell coming Pro 8 3 G tablet. I have all available Windows Updates, latest drivers and BIOS of 'My Dell'. Unfortunately, my Tablet has some problems with the mode 'sleep'.

  1. only the 'Stop' and 'Restart' options are available in the drop-down list on 'Power' in the charming bar. 'Sleep' is not available and I can not turn off the screen by pressing the power button / stop on the right side of the tablet. I did a few tests using the powercfg command-line tool and I found, the driver mobile (or hardware) prevents the past in standby mode: if I disable the driver, I can put my device in mode 'sleep' without any problem.

  Mobile broadband driver:

  Dell 5570e Wireless HSPA + (42mbps network) Mobile Broadband Card #4
  Date: July 9, 2014
  Version: 14.7.1050.64

  2. to wake up to the top of the device to sleep mode does not work if you do this after the first 10 seconds in mode 'sleep'.

  When I disable WiFi driver in Device Manager, clock works well, even a few hours after the mode 'sleep' was launched.

  WiFi pilot:

  Dell 1538 wireless 802.11 a/g/n adapter.
  Date: July 4, 2014
  Version: 3.7.2.59655

  I don't know if these questions are based on the hardware or driver/software based.

  Everyone knows about similar problems?

  Kind regards

  Dominik

  Hello, I had the same problem and I tried all drivers update possible solution (reformatting my Tablet 6 times), the update of windows files, etc... Nothing helps. In the end, I found a similar problem for a Dell location 11 Pro user who suggests to turn off the TPM and Bitlocker. As soon as I disabled it Win8 table bitlocker and TPM/Bitlocker from the Bios (Secure boot - disabled), the Tablet began to wake from sleep with no problems... it's been 1 week now and it has not failed once (it allows to get a black 3 - 4 times per day before the change of the screen).

• Behavior of sleep/wake 7130

  I have the vPro 7130 I recently updated to the latest version of the BIOS (A10), video & firmware updates. So far, the question of touch very pesky ghost seems to have been resolved. Finally! BUT now the sleep function (or more precisely, to wake up from sleep) seems to behave like a reboot. When I put the system to sleep, the display turns off immediately and I guess he falls asleep, as expected. BUT when I press the power button to wake him up and it is exactly the same way it does when I turn on it after a stop... past the POST and none of the applications I had opened are open. For example, if I had IE opens when I put it to sleep, after the "Awakening", when I start IE return it asks if I want to restore the previous sessions. I tried hibernate as well... It's worse! After pressing the power button after hibernation, the unit goes in the MAIL, then the kind of screen of light but it is, is just like that forever or until I get tired to wait (long, I waited is 10 minutes - then an eternity) and press on & hold the power button to stop it. Does anyone else know this? Made Eve pretty useless. It is certainly not the way which my laptops waking from sleep. Any help would be appreciated

  Hey people it seems that I solve this problem!

  I open the bios setup, active and disabled the feature 'block sleep' to force the sistem of re - save the option.

  Then, I selected the boot sequence complete rather than minimum (which is also the default), applied all changes and then the configuration of the bios have left.

  After the automatic restart of the sistem, sleep/power off problem has been resolved. Now my DVP 11 past in mode 'sleep' correctly. I just had to wait a bit for the first "suite" after these changes.

  I'll know if this solution is stable or not, but for now by selecting the full boot instead of the minimum mode seems to have also fixed other little freeze problems.

  NIC

• Computer do not normally sleep wake up and the computer hang when external USB devices are connected

  Hello

  I have a Windows 7 Home Premium 64-bit desktop CyberPowerPC, and there are currently two problems with it:

  1.), I have two USB ports in the front of my case. I am connected to my computer. Then I tried to connect my external hard drive using the USB cable supplied with it, but just at the moment where the end of the USB cable touched the port, the screen is black and automatically rebooted and froze when the display shows the brand CPU that is before the login screen. I actually press the restart on my case button to restart the computer with the hard drive already plugged. Then everything should work normally.

  It's the same thing when I tried to connect my iTouch 2nd generation.

  This problem occurs sometimes, however, but I wonder if someone always has a solution to this?

  2.) whenever I put the computer to sleep and he remains asleep for a while and I turn it on it once again, powers for about 2 seconds then it turns off. I have to turn the power supply and light in the order so he could get out of mode 'sleep'.

  I was wondering if you have solutions to this problem, as well.

  Thank you.

  Original title: new Windows 7 problem

  Ok.. I'll try again...

  The problem is caused by a bad 'ground' between the USB ports of the case and the motherboard. Static electricity is originally the USB device to short on the USB port which is originally the motherboard restart mode.

  I had the same problem and got my computer case exchanged. The problem has not entirely disappeared, and I use the USB port on the front on the card reader, just in case.

  It can also be a problem with the power supply or even the motherboard. It is very difficult to locate the failure without replacing in turn, a process that happens to be a bit expensive.

  The above is the reason why I recommend that you contact the MANUFACTURER. Don't take no for an answer off the manufacturer or supplier. It is a problem annoying which can eventually damage your operating system if it is enough...

• I can't disable the keyboard sleep wake

  I have a laptop ASUS N80vn.

  I want to be able to wake up my laptop ONLY by pressing the power button or the sleep button. I don't want another key on the keyboard to wake my computer from sleep. Currently, by pressing any key on the keyboard wake my computer from sleep mode.

  Here's what I've tried:

  1. go into Device Manager-> keyboards-> properties-> power management-> uncheck "allow this device to wake the computer".
  Why it does not work : there is no power management tab in the properties of the my keyboard driver window.
  I currently have four entries under ' keyboards in Device Manager:
  Device keyboard filter
  Keyboard 109 MCIR Microsoft eHome
  Keyboard MCIR Microsoft eHome
  Keyboard Microsoft eHome Remote control
  There is no power management tab in one of them!

  2. go in the BIOS, disable "Wake on keyboard.
  Why it doesn't: there is no other choice "Wake on keyboard", or anything similar, in my BIOS.

  3. open a command window, use the command of ' powercfg - devicedisablewake ' to disable the awakening of the keyboard.
  Why it doesn't: 'powercfg - devicequery wake_armed' does not all devices currently configured to wake my computer from sleep mode. In addition, "powercfg - devicequery wake_programmable poster the ' does not indicate that my network card and my USB mouse are able to be set to wake my computer from sleep mode (both are currently defined NOT to wake up the computer); It makes no mention of the keyboard.

  I am resigned to the idea that I have to change my registry, replace my keyboard drivers, or something just as intensively to prevent my keyboard to wake my computer, but I definitely want to do.

  If it's important, I only installed computer to go into a S3 sleep and you have turned off the Hibernate.

  Any ideas?

  Hi w1nt3rmut3,.

  Welcome to Windows 7 answers Forums!

  If you prefer to wake up the computer using the power button instead of using the keyboard, you can follow the steps and check if you can solve the problem.

  1. open the power supply Options by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Power Options.

  2, click change plan settings under the plan selected.

  3. in the change the settings of the front page, click on change Advanced power settings.

  4. on the Advanced Settings tab, expand power buttons and drop settings like the power sleep instead of shutdown.

  5. click on apply and OK.

  For more information, you can consult the following links on the power management implementation:

  http://support.Microsoft.com/kb/935799

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-power-problems

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have problems with sleep/wake with my sony vaio pro13

  Sometimes (not always but often) when I close the lid of my new laptop, he never sleeps as it should.

  I close the lid, drop the laptop in my bag. Take to work. I end up getting the screen went out, but the laptop did not sleep. I get to work, get out the laptop from my bag and it will be SUPER HOT. The display must be interrupted and I won't be able to get it lights without a hard reboot by holding down the power button.  When I finally ge comes on I will see a significant impact on my battery drain even if she was supposed to sleep. Compensation, it is running, drain my battery and more heating my material instead of sleep. What gives?

  Thanks in advance for any help.

  I have exactly the same problem.  I checked that no usb ports are in use and the same problem appears occasionally.  I even deleted the antivirus because I thought that a substantive program could be the problem, but it did not work.

  My model is SVP13215CLB, with the latest firmware.