Slideshow stopped working after update of El Capitan

Similar Questions

• Printer stops working after update to the Capitan AE

  My Epson AcuLaser M1400 work properly with my previous Mac OS.  Once I have updated to the last, the printer stops working.  When I print a document, the printer stopped - "filter" has crashed.  A problem of 'sehr4ap supposed to quit' report pops up and clicked OK, let it go to Apple.  What is a possible solution to this problem?  Thank you!

  If you have verified that you have the latest drivers installed,

  in SystemPreferences-> printers and Scanners remove the printer with the sign less below.

  Then re install the printer (with the plus sign).

• Anyone Bitmoji keyboard stop working after updating iOs 10?

  Anyone Bitmoji keyboard stop working after updating iOs 10?

  jerseryjones4 wrote:

  Anyone Bitmoji keyboard stop working after updating iOs 10?

  Someone posted on another thread a tweet from Bitmoji they are currently declining, but working on the issue.

• iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  New speaker of iFixit. After replacement speaker works perfectly. With FaceTime, the call, music, etc. And IPhone running on iOS 9.3.3. But after the update to IOS 9.3.4 speaker stopped working. Several restarts and total content and deletion of parameter did not help.

  Axiomer wrote:

  New speaker of iFixit.

  It is a problem.

  iPhones are not serviceable by the user.

  You're on your own.  After this service yourself, you finished your warranty (if she was still in effect), and Apple will not help you either.

• G72-a20EM screen has stopped working after updating the BIOS F.48.

  How is it possible that BIOS update recommended could turn off the LCD screen.

  Currently I see almost anything on the screen, but vga port works. But increasingly,.

  Intel graphics card is not recognized.

  G72-a20EM screen has stopped working after updating the BIOS F.48.

  What can I do to fix that?

  Good news!

  I found the working version, and it is version F.08.

  Supposedly new version have different Active cables, and this is the reason why the screen is dark.

  So, case closed, everything is perfect.

• Multifunction HP B110a stops working after update from Hp

  I have the all-in-one HP Photosmart B110a, who stops working after applying "HP updates notification". Impossible to print or access HP Solution Center (nothing works). Only solution is to use the installation CD to completely uninstall the HP software & then reinstall. I always prefer to bring software up-to-date, but never for this B110a.

  Member of the family with the same B110a also had this problem today after inadvertently update, so I fixed as mentioned above.

  A lot of your time. Could someone inform me why this happens & there at - it solution. BTW I stopped (as useful as an ashtray on a motorbike) updates

  Concerning

  Thank you Gemini02, not sure what you mean by "go through the HP software. I can find the IP address in the box at tools of the HP Solution Center/printer normally, but after applying the updates, I am unable to access the HP Center solution so I wouldn't be able to change the settings. In any case, I don't want to apply updates in the future.

  Kind regards

• Audio stopped working after update

  I have a T5010 e-machines running Windows 7 Pro, x 64 with 2 GB of RAM.  The audio has stopped working after a few updates.  Don't know which because he has many people who installed at the same time.

  I tried to uninstall the audio driver then reinstall.  I tried the shooters to boredom.

  In Device Manager the drive is recognized, but the question mark yellow and says that the device does not start and he has (code 10).    When I start the computer, I get a message that does not start the Realtek audio.

  Since I have no more options about what to do to solve the problem can anyone here help me get the sound working again.  Thank you.

  Hello

  Refer to the suggestions of Shinmila H said on December 10, 2009 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-no-sound-high-definition-audio-device/99f19403-c7f3-462e-9ff8-b36f260be979

  You can also check:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/ATI-high-definition-audio-device-has-a-driver/cd913a6c-40Cf-43c8-8073-fb865b4020d7

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Helmet of Q10 Blackberry blackBerry 10A stopped working after update 10.3. Help, please

  Dear friends! I bought a new Blackberry Q10 just a return of the week and it was on 10.2 os and worked very well, he made me a 10.3.1.1779 update which was about 1.5 GB and I opted for it. My headphone stopped working after the successful update. Besides that everything works well and good. I tried another helmet, cord to the and also tried to wipe off security and hard reset, but nothing helped. I am very worried and looking for help. Please guide me what should I do? Either it's a hardware problem or software related? PS each time as I use headphones it detects, by pressing the button answer on phone headset also Assistant bb opens but sound is not dating a helmet! What ahould do? My phone does not come in the warranty.

  Try different helmet "well known." If those who still fail in your device (but work well in another device), then the deduction becomes one of the devices, which of course we cannot do something internet remotely. Since you say that you have no warranty, you are then looking for a local store (to you) with a technician that you trust and ask them to go to a good assessment and estimate.

  Good luck!

• Microsoft Office 365 does not work after update of El Capitan 10.11.4 March 27

  I've upgraded to El Capitan 10.11.4 March 27 and my Microsoft Office 365, specifically the word & excel stopped working properly. Files can be opened, but when you save the new content, and then close the document, it does not record properly (and no backup or temporary file cannot be found). Once opened again, they eventually return to the saved before the update version. Thus losing the latest added to the document after the update.

  If anyone has experienced this or can help, I'd appreciate it. This is my first mac and I thought it would be much easier to use than a PC, but I'm not sure I can take this abuse much more time

  You can also report the issue in the Microsoft support forum. Note that Office 365 indicates only that you purchased Office in the subscription, but it does not indicate what version of Office you are using. The following link will allow you to choose the version during the validation of the issue: http://answers.microsoft.com/en-us/mac

• External screen does not work after update of El Capitan

  Hi all

  I hope someone can help out me with this. I have a MBP 2011 (i7, 4 GB ram, 330 M) and since I've updated to El Capitan (now 10.11.2) my external screen no longer works. I use a HDMI Cable MiniPort who worked before the upgrade. I am trying to connect to a 720 p TV and tried to connect it to my 28 '' ASUS monitor 1080 p that I normally use for my Windows desktop. None worked. My MacBook display blinks for a while when I connect it and then nothing. I was not able to connect it to my projector via VGA USB adapter until I've found the last update on the Web site of the adapter, then at least the display has been resolved. I tried the 'View to detect' button in the preferences system, no luck.

  I had the same problems. I installed El Capitan in MacBook Air early 2015. My external monitor is Dell P2314H. After installation, the MacBook Air is no longer detected the monitor, and the monitor does not save any video input to the computer.

  I chatted with Apple Support, but they don't give me satisfactory answers.

  Then I came across this answer on another thread of discussion the similar question:

  Re: El Capitan does not detect my external display

  And the solution that works for me is proving to be as simple as changing the cable. So I stopped using official mini Apple displayport to HDMI/DisplayPort/DVI connector. Instead now I use a cable (mini displayport to displayport in my Dell of MacBook Air) I bought locally (I live in Jakarta, Indonesia). It works like magic.

  I hope this helps you.

• Fingerprint reader has stopped working after update vV1.0.3.49

  I recently downloaded from Toshiba and installed Fingerprint Utility V1.0.3.49 (tc00407400c.exe) and since my fingerprint reader has stopped working.
  The software opens but usually recognizes my fingerprints and can not connect any other way.

  Have uninstalled and reinstalled several times and same result.

  Device Manager says device works ok.

  May I ask what model phone you have and what system do you use?

  Probably, you need to delete stored fingerprints and after restarting again, you should try to register new fingerprints using the software update of fingerprints.

  Have you tried that?

• Access keys stopped working after update Win XP on Portege M200 and M400

  After having invited to do, I recently upgraded to Windows XP two my Portege m400 and m200 notebooks.
  Since then, I've noticed as hotkeys that i.e. Fn + F1 - F12 has stopped working.
  Outside the windows updates, I only use and change a lot on the m200 so I am sure this has to do with the Xp updates.

  Can someone help me restore the m200 and m400 hotkeys?

  Hello

  Try reinstalling the common module for Win XP edition filed.

  The common module for Poretege you can find on the European driver Toshiba page:
  Laptop-> Portege-> Portege M Series-> Portege M400

  The common module for Portege lies in
  * ARCHIVE *-> Portege-> Portege M series-> Portege M200

  Welcome them

• Adapter Ethernet Thunderbolt has stopped working after update 10.11.2.

  Hello, after my update to 10.11.2 on my MacBook Pro retina 15 "mid-2015, my crush Ethernet Adapter has stopped working. It comes in the reporting system and it shows that it connected to ethernet, but in the network Panel, the State remains red and I don't get an IP address.

  My colleague who has a MacBook 2013 15 "retina Pro also has the same problem. We tried the retail adapters Ethernet Thunderbolt, but still no connection on one of our networks.

  Anyone else see this behavior?

  Same problem here on my end 2013. In Recovery Mode, the card works (good trick to know if hardware is broken). Roll back via Time Machine works 10.11.1 and adapter. Adapter and 10.11.2 relocation does not-MBP-R all my colleagues in different years work well after the update.

  BTW. : not only Thunderbolt Ethernet does not work, but the cards virtual Parallels (for shared and host-only) as well (only bridged mode works).

  So far, all the stuff has failed. And now I will notify again before the update.

• Walkman App Stopped working after update - how to fix?

  After that I did Release6b update on my Xperia Tablet S, SGPT123US/S, the Walkman App has stopped working and I can't figure out how to fix it.

  I just get a dialog box that says that "Unfortunately, the Walkman has stopped" with a button 'OK' whenever I try to run the application.

  Someone knows how to solve?

  Thanks for the help...

  try to erase the data on the app or uninstall updates, then update again.

• Keyboard stopped working after update

  Hello :)

  I've just updated my computer after the delay for some time now. Keyboard I know right - because the work volume buttons, but everything else (letters, numbers, etc.) have failed. I tried troubleshooting to solve the problem, but it was a bust.    Initially, I had windows 8 so I feel that this should not be a problem.

  Thanks for the help!

  Not that I can think of, I've never seen a keyboard stop working in this way.  If I were you, I'll try:

  • Put the keyboard in another computer
  • Try a different USB port on the plug
  • Try another keyboard
  • Use the on-screen keyboard to run the RSTRUI command and restore before the problem started happening