Slimline DVD drive combo - PX1055E-1NST

Similar Questions

• Need driver for combo drive px1055e-1nst

  Hi, I need a drivers for my slimline combo dvd/rw-px1055e-1nst

  where can I download from?

  Hello

  Usually, you don t need the drivers for the drive.
  Microsoft Windows operating system uses the own drivers that are included in the operating system.

  But you can try to check this site:
  http://www.cdrom-drivers.com/

  Maybe, you are out of luck.

• Need drive combo CD-RW/DVD-ROM for Tecra 8200

  I just bought an old Tecra 8200 with a CD-Rom drive in the SelectBay.
  I would change to a CD-RW/DVD-ROM combo drive.
  Could someone let me know the correct for this combo drive model number please?

  Best wishes

  Michael

  How about this:

  * PA3073E - 1 CD 2 *.
  4 x CD - R, 4 x CD - RW, CD-ROM 24 x, 6 x DVD-ROM

  and it supports this media:
  (Read/write) CD - R, CD - RW (read, re-writing), CD-ROM, DVD-ROM, DVD - R (read only), DVD - RW (read only)

  Greetings

• Combo CD-RW/DVD drive is compatible with the Satellite A60-S1591?

  What model of drive Combo CD-RW/DVD de TOSHIBA Satellite A60-S1591? I don't see myself it because laptop not with me, but I very need whis information!
  Help, please!

  Hello

  This unit could be developed and designed for the American market.
  I'm not in Europe.
  I m not 100% sure on the built-in player, but it could be a Toshiba DVD - Rom SD-R2512

• Combo DVD/CD DVD drive don't read not more, still reads CDs

  I just popped a DVD in a CD/DVD combo drive that I use for years and he refuses to acknowledge that there is nothing on the disc.
  It also seems to take a lot of time to ride.

  I tried Device Manager and the "driver update", but it says that I have the best driver.

  I use this drive for CD-RW/DVD-ROM combo for years and there has not been a problem. I tried several DVD-Rs serious and two commercial DVD movie discs and I get the same results as in this picture
  
  However, I have also tried several CD - r both music and audio and he recognizes them perfectly.
  I also tested the DVD in my computer Windows 7, and he recognizes them without problem. I was able to open a text file on the data DVD and see a few seconds of a film before I closed it.

  I don't remember the last time I watched a DVD movie, and I think the last time I used a DVD on this computer was when I played Gate II of Baldur's, which according to the files recording was in June since I played something on CD instead.
  I only burned both DVD of Baldur Gate I, II, Planescape Tormenet and Final Fantasy VII and VIII of the CED for this old computer (it came with Windows 98SE, it is NOT a new system), so it is not difficult to determine when I finally used a DVD on it.

  I have not noticed problems in using the drive as a CD drive, but haven't used the cd burner appearance or the appearance of DVD player in several months. I generally use DVD data on a newer Windows 7 computer and only use it for a few old games or music that normally use the CD, even if it's the main goal is to share my parallel printer with the new Windows 7 system that does not have a parallel port and a central server for my curriculum vitae cover letters and anything else I might want to access it from my modern desktop or laptop computer.

  I think it was more of a hardware issue, if it wasn't for the fact that it is reading CD without problem.

  P.S. I broke out the CD/DVD cleaner lens and it has no effect.

  Hello.

  As the PML said readers use different lasers for different drives.  I encountered this problem several times and replace the drive is your only option.

  See you soon.

• My Combo CD-RW/DVD driver

  I have a Rom CD - Rw that was playback DVD, now it won't, what should I do to restore its "use of the combo?

  I did read and play CD audio... what I did... ?

  Hi WellsTucker,
   
  -Did you of recent changes made to your computer before this problem?
   
  Run the fix tool from the following link and check if this may help in fixing the issue:
  Your CD or DVD drive cannot read or write media - A Mr Fixit

• Pavilion Slimline s5-1020: DVD drive not recognized in Device Manager

  My rarely used DVD player no longer works. Here are the things I have seen/made:
  -J' updated to Windows 10. It may or may not have stopped working before the update.
  -I update Windows automatically, and everything seems to be in order there.
  -The DVD seems to be operational, insofar as you can hear it turn when a disc is inserted.
  -Setup recognizes, and it is enabled; It is not at all in Device Manager or in the file Explorer.
  Based on the things I've tried, there are indications that it may be either a hardware or a software problem (or both?):
  
  SOFTWARE PROBLEM?
  I followed these as much as possible:
  http://support.HP.com/us-en/document/c03370738#c03370738_NoDriveWin8
  http://support.HP.com/us-en/document/c03370738#c01895589_resetpower
  http://h30434.www3.HP.com/T5/desktop-CD-DVD-read-only/read-this-for-CD-DVD-drive-with-burning-Missin...
  
  -I got disconnected/reconnected the drive.
  -J' tried various DVD I knew to do.
  -I don't have to update the BIOS, given warnings.
  - Nor did I mess with registry filters.
  -J' tried to find a Microsoft Fixit solution, but the one referenced somewhere in these pages don't apply to this OS - I think it was for Win 7.  I tried MS Control Panel convenience stores, but none of them worked.
  So I can't say whether or not it is a software problem.
  
  HARDWARE PROBLEM?
  -J' have set the boot on the CD order in configuration and the desktop with Windows 7 HP Pavilion system repair disc - nothing happened, he went straight to the HD (even if I had turned off).  So that leads me to believe it may be a hardware problem after all.
  
  Do I have other options at this point, except maybe buy another drive?  And in fact if I do, it is possible that one does not work either?

  While you are not alone in this problem, here's a thread that deals with her.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/CD-DVD-drive-not-detected-after-upgrade-to-Windows-10/TD-p/5172346

  See if that helps

• CD/DVD drive is not recognized by Windows or other programs. HP Pavilion s7310n Slimline PC

  He used to work. It comes from when the computer was around the age of 4 months. should have put in, but could not take the days off to bring it back to BEST BUY - 2 years ago.

  Then... the CD/DVD drive is not recognized by Windows or other programs. If I insert a CD as Photo Suite III or any what CD/DVD, the green light comes on but no rotation and not even a warning to error.

  Now what? How can I find out / know the specs of what to look for a replacement/new one... I lost the book in my move to Florida. I have tried all sorts of key word in GOOGLE and I am half blind and tired to be re-directed to sites that have nothing to do with my question.

  Can someone help me please? Thank you. TJ Rev.

  PS... None of the links in the Solution of Sissy2 DIFFICULTY to where they are supposed to. I don't think it's my problem anyway.

  MY CD/DVD drive is dead.

  Message edited by aalienlady on 05/21/2009 21:32
  Message edited by aalienlady on 05/21/2009 21:32

  Download XP_CD-DVD - Fix.zip and save this file on your hard drive. Navigate to where you saved it, and double-click the file to extract the content. Find the EXE file that you extracted and double click it.  A confirmation dialog box appears when the script is done.  You may need to reboot for the change to take effect. Works on XP and Vista. Good luck!

• Portege M200 with external DVD drive

  I have a M200 with external drive DVD COMBO Slimline PX1055E-1NST.
  I've upgraded to VISTA and it will reinstall the devicedriver. Where can I find a driver that works with VISTA?

  Hello

  Your player is connected to the PCMCIA slot. Am I wrong?
  Unfortunately, at the moment that these drivers don't exist! :(
  I didn t find on the page of the Toshiba driver.

  Try searching for any 3rd-party PCMCIA drivers for Vista. Maybe you're lucky.

• Portege M200 - how to boot from external CD/DVD drive?

  I have a Toshiba Portege M200 and I want to reinstall the operating system. I'm a reader of CD/DVD external (USB connected) and need to know what key I have to press on when you turn the laptop to get it to go to the CD drive instead of the HARD disk.
  Have you tried all the F1 - F12 keys but no success yet

  Thank you

  Hello

  When you start your laptop and when the Toshiba screen is indicated are symbols of small disk bootable shown on the underside of the screen?

  By the way:
  Readers and following (USB, PCMCIA) controllers have been tested successfully:
  one) Toshiba, PA3352E-SCD2, CD-RW/DVD-Rom USB 2.0 drive
  (b) Toshiba, PA3402E-1DV2, Rev.501, USB 2.0 DVD Super Multi Drive
  (c) Toshiba, PX1055E-1NST with a PC Card (16-bit), the cable II, PCMCIA.
  (d) Toshiba, PX1055E-1NST with a CardBus, cable II, CARD BUS

• A100: Can't see my CD/DVD drive

  I uninstalled an unknown version of a program called Daemon tools (earlier this year) one never since my cd-RW/dvd drive has always been does not appear in my computer as if I did not at all a cd/dvd drive!

  I still need to acsess my C drive and any other device I have plugin via USB or whateva. But when I start my laptop, only 1 time in 4 or if my CD-RW/DVD drive appears.
  If I put a CD or DVD in the drive when the icon is not in my computer, nothing happens, and I have not found a solution.
  How can I get my CD/DVD combo drive to work whenever I start?
  -J' have Priofessional of Windows XP service pack 2 Version 2002
  -J' have a program called ' drag ' n drop CD + DVD "like burning software.
  -My computer is a Toshiba A100 with pentium m 1.4 ghz, 496 MB of ram.

  I can't find anything to do with cd/dvd players or drivers in Device Manager. They have completely disappeared. I can't install this again as a "new hardware" because the computer can not find. Maybe I should find a program on the net that can reset my drivers or sumething? My cd/dvd drive does not at all now.

  Any ideas would be greatly apreciated.

  Hi Matthew,

  I'm not familiar with the program Daemon Tools, but the loss of the CD/DVD drive is a known problem when deleting some portable software you.

  The Microsoft Knowledge Base has several artocles on the problem and how to solve it.

  Please visit the following link: -.

  http://support.Microsoft.com/kb/314060/

  Kind regards

• Cannot write DVD/RW and CD/RW on my new Slimline DVD-RAM

  Hi, I have added one slimline DVD - RAM Toshiba PA3231E-1DV1 http://be.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/individualOptions.do?LNG=9&service=BE&ACTION=SHOW _ ATTRIBUTES & OPTION_ID = 44333 & tab = 1 #1
  in my Portoge M100. I can read and write DVD - RAM, CD - R no problem
  read only DVD, DVD - RW and CD - RW (if something already in this disc, otherwise no drive detected), but cannot write. Support tells me that this drive can read and write all discs, but cannot help me...

  Help?

  Hello

  According to the description of the drive can write DVD-R, DVD - RW and DVD-RAM. In my opinion, the first step, you can try is to test the player with various media (various manufacturers).

• Satellite 1800-911: error #1 - C2502 CD/DVD drive IDE

  PC: satellite 1800-911 BIOS V.2.1.

  I try to fix the problem with my DVD/CD COMBO drive (all of a sudden do not read any kind of CD).
  I tried to update the firmware from 1313 to... I don't remember. I get now, before XP pro SP2 start, the "IDE #1 ERROR" message and the operating system do not recognize any DVD/CD.

  BIOS recognize, ligth blinks and you can use the eject button. When XP is from that of the ligth is disabled and the eject button do not work.

  Now, if I try to go back to firmware 1313 (from boot floppy BACK) I get an error TYPE ROM INCORRECT.
  Can I fix this?

  > BIOS recognizes, the light will blink and you can use the eject button
  That means nothing!

  If the IDE 1 error message # appears it means that the BIOS does not recognize the device (CD/DVD drive) that is connected to the IDE 1 controller.

  I think that you used just a bad firmware and flashed settings preinstalled with the wrong firmware!
  Now the master\slave\c-salt settings have been changed and the BIOS cannot access to ODD.

  I don t know where did you get the firmware, but in my opinion this firmware is certainly false and not supported!

  I found this drive here on the Toshiba page but the firmware is missing
  http://www.storage.Toshiba.EU/index.php?id=8&PID=99&SID=3

• Satellite A100 does not recognize the new CD/DVD drive

  I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

  Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

  Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
  It seems to work, and the light blinks I think that it is not broken.

  I just plugged it because that's the way I was told to do.
  I need to download the drivers to operate?
  It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

  I'd appreciate any help. THX

  The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
  I think there bad master/slave/c-salt settings

  As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

  You can solve it only purchase a new compatible disc.

  Usually the ASP in your country could help you buy this disc of these guys here
  However, you can consult the user manual if there are a few details on the compatible sides.
  My user manual provides this information.

• CD/DVD drive does not appear in Windows 8

  My CD/DVD drive no longer appears in Windows Explorer in point 8.1 of Windows on my desktop HP Pavilion Slimline 400-034. The disc rotates during startup. I tried the troubleshooting of Microsoft Window 8 with no luck. I would try the HP troubleshooting which requires access BIOS when booting, but by pressing F10 at startup me does not BIOS but Windows load normally. Any suggestions to at least help me get the BIOS?

  Solved! No. thanks to HP. Even if I had never opened the file on my PC and make sure that the cable DVD could not be disconnected, I decided to look for. Much to my surprise, he has been disconnected - but not by me - by a HP technician. I remembered that I had to return the PC to HP to replace the power supply warranty in June 2014. Not only have they not reconnect the cable SATA DVD, they put the cable from the hard drive in the MB connector where the DVD cable was supposed to be. After trial and error and insert the DVD cable in the 3 open SATA connectors with no luck, and finally move the cable from the hard drive to another connector and put the cable DVD where the cable from the hard drive was, the DVD has been recognized by Windows and working correctly. Thanks to HP for the many hours I lost to try to correct their mistake.