Sliver does not reach 300 ft

Similar Questions

• Portege R100 video cable does not reach the replacement LCD screen

  Hi guys, I have replaced the LCD screen of my Toshiba R100, than they had in it was defective. It seemed that it was a replacement at some point however. In any case, I received my new screen, but does not reach the video cable to the top of the circuit of LCD screens. How am I meant to connect it to the screen? Is there an extension cable or what? The screen they had in there previously looked like they were welded copper wires about 8 digitizer.

  Here are 2 pictures of what I mean

  

  

  Hello

  Where did you buy this screen?
  Are you sure that it is perfectly compatible with your laptop protected R100 to 100%?

  Looks like it s not fully compatible
  However, if an extra cable is necessary you can get it from the Toshiba ASP in your country.

  In your case, I recommend you contact the guy and ask for compatible cable!

  Welcome them

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• system recovery does not reach 50%, presario CO61-312SA

  Presario CO ^!-312SA does not start. Click f11 to start recovery of the system that does not reach 50%. I understand that the wireless switch should be during the restore process, the wireless button will be red or blue? If it should be blue, then I can't go blue... If one red so... it is!

  I bought Windows 7 drives home premium but have no idea how do I reinstall my OS... There are 2 disks for 32-bit and 64-bit, but I can't read the sticker on my laptop to see what I need to use a disc.

  Any information you can give me on any of my questions today will be very appreciated, thank you x

  Hello

  You have a few options in my opinion please find the steps below may help you solve the problem.

  (1) Please run the hard drive & memory test and check if any part fails, you will have to replace the part. If both the test passes you can call the HP technical support to order the recovery again disc.

  Test a hard drive by using the Built in Self Test

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

  
  

• Converter does not reach 1% - "an error occurred during conversion:"converter.fault.ConverterFileFault"

  I'm trying to convert a laptop of ageing of a virtual machine, but it does not reach 1% with the vague error "an error occurred during conversion:"converter.fault.ConverterFileFault. "

  With VMware vCenter Converter Standalone Client 5.5.1 build 1682692 locally running the conversion of the machine running.

  On a laptop with WinXP Sp3, with a single drive, by recording the VM on a USB hard drive attached.

  I have run chkdsk on the drive. (with the F option) and defragmented several times

  Shadow copy services have been restarted and are running.  I even downloaded the VSS SDK and replaced the *.dll.
  It is with the latest version of the client converter

  No firewall is active.

  I am logged on as administrator, even tried to create a role of administrator with the name "Administrator".

  Drive is not encrypted I can say (no Truecrypt)

  The xp includes backup works (i.e. work VSS)

  I looked at the other questions/logs here, but do not see the same exact

  VMWare Converter error: impossible to clone the volume C

  Converter fails at 1%

  UPDATE: Solution via Hack
  I could get this job sort of a hard-working hack.

  I first downloaded Acronis image 2014 (a free 30 day trial) then who used to capture the image of the operating system, the * tib file is about 40 GB in size.

  Unfortunately VMWare converter works only with version of Acronis 2012, so the *.tib file could not be used directly to the source of the virtual machine

  So I created inside VMWare Workstation a new empty VM for Windows XP

  I gave her 2 virtual disks hard 50 GB and 50 GB mapped as C: and H:

  reinstalled windows in the C

  copied the *.tib in the secondary hard drive H: as shared folders (for example how a USB is sometimes mounted) are not accessible when the Acronis is restoration of the tib via its custom BootLoader

  Download and install Acronis image 2014 on this new fresh OS

  used Acronis to restore from this backup on H: * tib in the C: crush installing the OS

  reactivated again, windows

  fighting pilots who the real differeed

  Defragment the drive VMware

  Seems to work as expected.

  I got this job, see the update on the use of Acronis to work around the problem.

• Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Most desktop printers cannot image all the way at the edge of the page.

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• Custom class event does not reach Application?

  Hey everybody,

  It is probably a pretty easy question, but it left me speechless. I can handle the events of user interface components in the Application. I can handle the events of a custom user interface, within its own class object. But the dispatched event of a custom, object of the user interface does not seem to reach the Application. The event is expected to reach Application? Event if an object should be managed within the class of this object, how can I control my program flow?

  Thank you!

  I saw only he made in the settings where they inject an event dispatcher.  If you don't want to use a frame, you could have a singleton (vomits in the throat) and pass a UIComponent.  Now remember you this UIComponent must be fixed on the display as list

  var vbox:Group = new Group();

  vbox.dispatchEvent ("myEvent")

  still will not be heard by the rest of the application.  You would have to wait for a user interface component to add pass THEN to your singleton for use in the rest of the application.  Honestly, I didn't think too much about.

• Processor does not reach 100% of the speed of the clock when 'PCI Lock' is disabled in the Advanced Start parameters

  Hi guys,.

  Ran into a strange problem, so thought I'd give this forum to try. Tried to discuss on the Windows forums community but they have been seen nothing of all this.

  I noticed that the machine felt slow in the last month, but never gave him much however. Today, for some reason, I opened the Task Manager and noticed that no matter how much charge the CPU is obtained, the speed does not pass more than 2.28 GHz (Standard clock speed is 2.3 GHz). Now, at first I thought that it could be the power settings, since I got the butterfly processor speed previously by reducing it to 95%. After a few game, I spread the power settings, since the system does not meet them if you cut the State of maximum power, the processor speed drops too. When the value to 100%, it does not more than 2.28 GHz. In other words, since it's a pocessor mode, because it reaches its full capacity, it won't in mode.

  I updated the drivers and BIOS from the manufacturers Web site. The only way to fix this is by checking the box 'PCI Lock' in the advanced in msconfig startup options. When the box is checked, the computer restarts and the processor works properly, increasing up to 3.3 GHz. The only problem with either once the box is checked, problems with other devices, for example, the network card is not recognized at all. Uncheck box reboot and network card functions as it should, but the processor is throttled.

  I don't know if it could have a bearing on the question somehow, but fails the secondary HARD disk spin down according to the power settings. It is supposed to stop after 1 minute, but despite having no activity (in resources, or audible reads/writes monitor) it keeps spinning. If you have any advice on the processor, maybe you have an idea on this instead? His eating his power and producing unnecessary heat and noise because the hard drive is used for backups.

  The specifications are:

  Reference Dell M3800

  Windows Pro 10

  CPU i7-4712HQ 2.3 GHz (up to 3.3 GHz)

  16 GB OF RAM

  512 Samsung SSD (with BONE)

  Secondary 1 to

  I don't know when the issue started, since performance was slow for about a month and I can't blame new facilities for this. The PCI lock seems the only way to solve the problem temporarily. All the drivers are up to date, even tried downgrading and upgrading the BIOS. Only the PCI lock seems to have no effect.

  Any help would be greatly appreciated!

  Hi cc171,.

  Thank you for your continued support.

  After a few more game, I'm desperate and "reset" of the operating system (keeping my files). That, to my surprise, did not help. I've done some windows system checks in the cmd (sfc and dism) and tools are a few corrupted files (which they were unable to repair due to files being corrupted as source). I then provided dism an iso windows fresh to keep system files to and managed to fix the image. Unfortunately, this does not solve my problem.

  Here are the corrupt system file that could not be repaired:

  Could not reproject corrupted file [23 ml:24] "? \C:\WINDOWS\SysWOW64"\[l:10]"opencl.dll"; source file in the store is also corrupted

  I then proceeded to do a complete factory reset (because I lost all my applications anyway, there was nothing else for me to lose). The system restored to W8.1, which is really strange, because I deleted all the files of previous windows.old through disk cleanup. Even if I had retired, good news. The limitation was missing, and the drive turned down when realized. I've been invited to upgrade to W10, I did (the download process and installation is rather time consuming...) and once up and running, the CPU still works correctly.

  Of course, my next step, has been updated all my drivers using my product key on the DELL Web site.

  I downloaded everything manually and kept checking my processor after each installation/reboot. Everything worked fine until I installed the:

  * Intel platform dynamic and thermal setting driver *.

  After a reboot, the Task Manager showed once again to the top of the formidable GHz 2.28. I put a system restore point, just like windows has fully booted, before updating the drivers, so I decided to restore it at this point. No luck, the processor still be strangled. Because I have nothing to lose, once more, I do a reinstall full (which once more, the rolls be back to W8.1. After around an hour, the W10 up and running. I went to update all my drivers, exuding the platform driver and dynamic thermal setting, with reasonable success. The processor is no longer limited. The only problem, after installing the motion sensor driver, the HARD drive stopped spinning down. At this point, I don't have time to play, decided not to back down.

  Thus, at the end of the day, the culprit to my problems were the official DELL drivers:

  System utilities | Intel platform thermal and dynamic framework pilot (104 MB)

  &

  ST Microelectronics LNG3DMTR pilot sensor of movement (35 MB)

  With the new installation of Windows (and the Motion Sensor installed Driver), once more SFC/scannow found errors that cannot be repaired. Thorugh DISM, I managed to repair the image of the system, but the HARD drive always turns freely. More importantly, the limitation is GONE.

  Regarding your questions above, I don't have a chance to check if there is power or the current limit, but there's certainly been no thermal regulation. The CPU is still relatively fresh, and fans did turn, even if very quietly (now with the processor works properly the temperature rises up to 84 degrees (up 3.29 Ghz) and fans spin very hard under prolonged load).

  Regarding the HDD, no system or other utilities consulted the reader (analyses excluded antivirus, indexing and so forth that unchecked, the disc is only used as a manual backup). Even if the HARD drive isn't spinning down, no limit certainly makes life a lot easier. Ill wait for a new version of the driver for the motion detector see if it solves the problem, if not, disconnect the drive from the motherboard may be my only option.

  I don't know why the official Dell drivers could corrupt the file system, since they were after all, designed for this particular system, on this particular operating system. There are no other programs interfere with their installation and operation, given that the pilots were the first things to be updated.

  At the end of the day, I found the problem, it's a good step forward, but it seems that the resolution is out of my reach.

  Thanks for your help!

• compressor does not reach 28 seconds in treatment

  After sending file fcpx to the compressor, it will fail at 28 seconds in treatment. In the same event fcpx I have 2 projects ongoing 1 to process completion ok but 1 fails after 28 seconds. I hope someone can help. My computer knowledge is limited. While now the key option + cmd and the compressor still does not work, I opened fcpx. Recently, I have completed other major projects without problem.

  I also did the cmd + SHIFT + G and follow-up library / application support / compressor / history / delete a recent entry to delete the history, it has not helped I also did command + SHIFT + G / home lib / users / shared / library / Application Support / Apple Qmaster / storage / delete files in the V4 folder, but the folder was empty

• close: disappears from the task bar, her box "turn off computer" does not reach out

  I am running windows xp sp3 32-bit. When I shut down the computer through the Start button, the taskbar disappears, and the box "turn off computer" does. I have to use ctrl-alt-del to shut down the computer. I got the settings to a previous restore point when it was still working, but it does not solve the problem. What should I do to return to its original position?

  Hi tx_grizzly,
   
  -Have you done recent changes made to your computer before this problem started to happen?
   
  Try these methods and see if it helps fix the problem.
   
  Method 1: Follow these steps to change the way users log and see that it helps:
   
  a. Click Start. Click on Control Panel.
  b. open user accounts in Control Panel, click on change the way users connect or disconnect, click on use the Welcome screen.
  c. click on apply. Click OK.
   
  Method 2: Try the steps listed in the article for this problem:
  Your computer stops responding when you try to shut down in Windows XP

• Replacement drive DVD open/close button does not reach (model HP p6110f)

  Hi all

  I replaced my DVD drive on my P6110F desktop with a model from Asus. Everything works fine * except * the fact that existing teeth of the open/close Panel button do not reach the real button on the disc itself, me leaving no option but to use a desktop widget to open the CD tray.

  I searched on the net and can't seem to find a solution. Any ideas on how to make this work? Thanks for your suggestions.

  Czar

  I had the same problem with my P6-2371ea, so what I did adjust the screw until it touches, then tighten them, if it is not an option due to too much of a gap to take the front off the PC and put a match with adhesive tape double sided on the DVD button or something similar it has worked for me in the past

• scrollbar thumb skin does not reach the bottom of the track

  I have a Flex 4.1 application when there is a vertical list, related to a table. As long as the list scroll bar is not skinned, everything is ok, the thumb oscillates up and down the track. But after the addition of a skin, it fails. The thumb never goes all the way down the track when scrolling, but blocks somewhere between the two. For the very long list of items, it even stops at halfway.

  Despite this behavior, the list is actually scrolls to the last item - so the problem is not with some elements at the bottom of the list being inaccessible, but only on the thumb not reaching the bottom of the track, which looks as if the list was stuck at halfway. The skin is very simple and it is pretty much set a picture for the track and the thumb. Is there a method to make sure the thumb always goes to the bottom of the track, the size of the list without worrying?

  Try fixedThumbSize = "true" on the VScrollBar. In addition, it can help to add constraints to the fxg. For example:

  I would like to do the same for the track to make sure that the dimensions of each component is correct. The Scrollbar skin itself seems correct.

  -Kevin

• ADF: commandButton does not reach the target method

  Hi all
  
  This is my first post here, I hope you can help me, I'm new in the ADF, and now I am facing a problem, let me explain:
  
  11.1.1.55.36 ADF business components
  jDeveloper 11g Release 1 11.1.1.2.0
  
  In the application, I have a button that changes the attribute of "render" of a showDetailItem, this subject conatains some commandButons but when I click on these buttons the listener method is never triggered. I don't know what happened in this situation. Any idea is always welcome.
  
  Thanks in advance,
  Sergio Valdez
  
  Code:
  commandButton activation online: 58
  showDetailItem on line rendering: 125
  problem commandButtons to lines: 132 & 139
  

  <?xml version='1.0' encoding='UTF-8'?>
  <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
            xmlns:f="http://java.sun.com/jsf/core"
            xmlns:h="http://java.sun.com/jsf/html"
            xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
            xmlns:c="http://java.sun.com/jsp/jstl/core">
    <c:set var="viewcontrollerBundle"
           value="#{adfBundle['com.axtel.reporteador.MessageBundle']}"/>
    <jsp:directive.page contentType="text/html;charset=UTF-8"/>
    <f:view>
      <af:document id="d1">
        <af:form id="f1">
          <af:panelStretchLayout topHeight="50px" id="psl1" bottomHeight="26px">
            <f:facet name="top">
              <af:panelGroupLayout layout="scroll"
                                   xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                                   id="pgl2">
                <af:inputText label="#{viewcontrollerBundle.NOMBRE_DE_ENCUESTA}" id="surveyName"
                              value="#{SurveyMB.surveyName}"/>
                <af:panelGroupLayout id="pgl3">
                  <af:commandButton text="#{viewcontrollerBundle.CREATE_SURVEY}" id="surveyCreate"
                                    actionListener="#{SurveyMB.createSurveyListener}"/>
                  <af:commandButton text="#{viewcontrollerBundle.RESET_SURVEY}" id="surveyCancel"
                                    actionListener="#{SurveyMB.cancelSurveyListener}"/>
                  <af:commandButton text="#{viewcontrollerBundle.SURVEY_ADD_QUESTION}"
                                    id="addQuestion"
                                    actionListener="#{SurveyMB.addQuestionListener}"
                                    rendered="#{SurveyMB.surveyAlreadyCreated}"
                                    disabled="#{SurveyMB.questionAddEnable}"/>
                </af:panelGroupLayout>
              </af:panelGroupLayout>
            </f:facet>
            <f:facet name="center">
              <!-- id="af_one_column_header_stretched"  -->
              <af:panelAccordion id="questionAccordionPanel" discloseNone="true"
                                 partialTriggers="addQuestion">
                <af:forEach items="#{SurveyMB.survey.questions}" var="question"
                            varStatus="i">
                  <af:showDetailItem text="#{question.question}"
                                     id="questionDetailItem"
                                     disclosed="#{( SurveyMB.questionEditEnable) and (i.index eq SurveyMB.questionToBeEdited)}"
                                     disabled="#{(( SurveyMB.questionEditEnable) &amp;&amp; ( SurveyMB.questionToBeEdited ne i.index)) or SurveyMB.questionAddEnable}">
                    <f:facet name="toolbar">
                      <af:group id="g1">
                        <af:outputText value="outputText1" id="ot1"/>
                        <af:commandButton text="#{viewcontrollerBundle.SURVEY_ANSWER_DELETE}"
                                          id="questionDelete"
                                          actionListener="#{SurveyMB.deleteQuestionListener}">
                          <af:clientAttribute name="questionIndex"
                                              value="#{i.index}"/>
                        </af:commandButton>
                        <af:commandButton text="#{viewcontrollerBundle.SURVEY_QUESTION_EDIT}"
                                          id="questionEdit"
                                          actionListener="#{SurveyMB.editQuestionListener}">
                          <af:clientAttribute name="questionIndex"
                                              value="#{i.index}"/>
                        </af:commandButton>
                        <af:commandButton text="#{viewcontrollerBundle.SURVEY_ADD_ANSWER}"
                                          id="questionAddAnswer"
                                          actionListener="#{SurveyMB.addAnswerListener}">
                          <af:clientAttribute name="questionIndex"
                                              value="#{i.index}"/>
                        </af:commandButton>
                      </af:group>
                    </f:facet>
                    <af:panelGroupLayout id="pgl5">
                      <af:panelGroupLayout id="questionEditPanel"
                                           rendered="#{SurveyMB.questionEditEnable}">
                        <af:selectOneChoice label="#{viewcontrollerBundle.SURVEY_QUESTION_TYPE}"
                                            id="questionTypeToEdit">
                          <af:selectItem label="Seleccion Multiple"
                                         value="checkbox" id="selectItem1"/>
                          <af:selectItem label="Seleccion simple"
                                         value="radiobutton" id="selectItem2"/>
                        </af:selectOneChoice>
                        <af:inputText label="#{viewcontrollerBundle.SURVEY_QUESTION}"
                                      id="questionToEdit" rows="2"/>
                        <af:commandButton text="#{viewcontrollerBundle.ADD}"
                                          id="questionEditOk"
                                          actionListener="#{SurveyMB.addQuestionOkListener}"/>
                        <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                          id="questionEditCancel"
                                          actionListener="#{SurveyMB.addQuestionCancelListener}"/>
                      </af:panelGroupLayout>
                      <af:panelHeader text="Respuesta 1" id="answerHeader"
                                      size="3">
                        <f:facet name="menuBar">
                          <af:commandLink text="#{viewcontrollerBundle.EDITAR}"
                                          id="answerEdit"
                                          actionListener="#{SurveyMB.deleteAnswerListener}"
                                          disabled="#{requestScope.SurveyMB.editAnswerLinkEnable}"/>
                        </f:facet>
                        <f:facet name="toolbar">
                          <af:commandLink text="#{viewcontrollerBundle.ELIMINAR}"
                                          id="answerDelete"
                                          actionListener="#{SurveyMB.editAnswerListener}"
                                          disabled="#{requestScope.SurveyMB.deleteAnswerLinkEnable}"/>
                        </f:facet>
                        <af:panelGroupLayout id="answerEditPanel"
                                             rendered="#{SurveyMB.answerEditEnable}">
                          <af:inputText label="Label 3" id="answerToEdit"/>
                          <af:commandButton text="#{viewcontrollerBundle.OK}"
                                            id="answerEditOk"/>
                          <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                            id="answerEditCancel"/>
                        </af:panelGroupLayout>
                      </af:panelHeader>
                      <af:panelHeader text="#{viewcontrollerBundle.SURVEY_ADD_ANSWER}"
                                      id="panelHeader2" size="3"
                                      rendered="#{SurveyMB.answerAddEnable}">
                        <f:facet name="menuBar"/>
                        <af:panelGroupLayout id="panelGroupLayout1">
                          <af:inputText label="Label 3" id="answerToAdd"/>
                          <af:commandButton text="#{viewcontrollerBundle.OK}"
                                            id="answerAddOk"
                                            actionListener="#{SurveyMB.addAnswerOkListener}"/>
                          <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                            id="answerAddEdit"
                                            actionListener="#{SurveyMB.addAnswerCancelListener}"/>
                        </af:panelGroupLayout>
                      </af:panelHeader>
                    </af:panelGroupLayout>
                  </af:showDetailItem>
                </af:forEach>
                <af:showDetailItem text="#{viewcontrollerBundle.SURVEY_ADD_QUESTION}"
                                   id="showDetailItem1"
                                   disclosed="true"
                                   rendered="#{SurveyMB.questionAddEnable}"
                                   partialTriggers="addQuestion">
                  <f:facet name="toolbar">
                    <af:group id="group1">
                      <af:commandButton text="#{viewcontrollerBundle.OK}"
                                        id="questionAddOk"
                                        actionListener="#{SurveyMB.addQuestionOkListener}"
                                        immediate="true"
                                        binding="#{SurveyMB.addQuestionOkBinding}"
                                        action="#{SurveyMB.questionAddOkAction}"
                                        partialTriggers="addQuestion"/>
                      <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                        id="questionAddCancel"
                                        actionListener="#{SurveyMB.addQuestionCancelListener}"
                                        partialTriggers="addQuestion"/>
                    </af:group>
                  </f:facet>
                  <af:panelGroupLayout id="panelGroupLayout2">
                    <af:panelGroupLayout id="pgl8"
                                         partialTriggers="addQuestion">
                      <af:selectOneChoice label="#{viewcontrollerBundle.SURVEY_QUESTION_TYPE}"
                                          id="questionTypeToAdd">
                        <af:selectItem label="Seleccion Multiple" value="checkbox"
                                       id="si2"/>
                        <af:selectItem label="Seleccion simple"
                                       value="radiobutton" id="si1"/>
                      </af:selectOneChoice>
                      <af:inputText label="#{viewcontrollerBundle.SURVEY_QUESTION}"
                                    id="questionToAdd" rows="2"/>
                    </af:panelGroupLayout>
                  </af:panelGroupLayout>
                </af:showDetailItem>
              </af:panelAccordion>
            </f:facet>
            <f:facet name="bottom">
              <af:panelGroupLayout id="pgl1">
                <af:commandButton text="#{viewcontrollerBundle.SURVEY_SAVE}" id="surveySave"
                                  action="#{SurveyMB.surveySaveAction}"/>
                <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                  id="cancelSurvey"
                                  action="#{SurveyMB.cancelSurveyAction}"/>
              </af:panelGroupLayout>
            </f:facet>
          </af:panelStretchLayout>
        </af:form>
      </af:document>
    </f:view>
    <!--oracle-jdev-comment:preferred-managed-bean-name:SurveyMB-->
  </jsp:root>

  Published by: user2931026 on Apr / 10/2010 01:13
  
  Published by: user2931026 on Apr / 10/2010 09:01

  Sergio,
  good work, now I can read the code :-)
  Strange, nothing appears immediately.
  The buttons in the showDetailItem are the only ones who does not?
  One thing you can try is to use the visible property rather than the rendered attribute. The user interface looks the same, but the properties behave different (rendering = false means components are not on the page, visible = false means components are on the page but do not appear to the user).

  Timo

• WRT ac1900 connection is wired not reach 300 Mbps

  I have a router AC1900 WRT to gigabit, it should be fast.

  What should I do to get this router to work at the maximum speed available for me?

  If I connect directly to the modem, I get 300 Mbps.

  If I go through the router I get 42 Mbps, the router seems to be limiting it.

  I can't find any option to release this place, ideas?

  Deactivation of MP brought me to 308, I'm okay with that...

  Thanks for the info on the Auto setting of stuff, we would think that they would have standards, don't think not!

  Also, I do not use the Parental control...

  Thanks again, I am fine with 308 Mbps...