Slow printing on HP PhotoSmart C410A

Similar Questions

• Slow printing of the Photosmart 2610xi

  My Photosmart 2610xi (6 years) has slowed down considerably at an unacceptable rate. Y at - it a fix for this problem?

  Thank you

  GarrettEdgar

  The most likely cause is a failed cartridge.  The 2610 print (but not copy) with a removed cartridge.  First remove the color cartridge, then print a page of the Notepad.  If the page is printed at a normal speed the color cartridge is the question.  If the printer is still slow then, put the cartridge color back in and remove the black print cartridge and print a page.  If the printer prints now at normal speed then the problem is the black cartridge.  [By the way, don't forget to close the latch on the missing cartridge.]

  Regardless of the cartridge is the question (one still in the printer while it is printing slowly) must be replaced.

• Cannot install the printer driver for Photosmart C410a

  I had a problem of analysis to one of my PC, so I deleted all driver HP software, downloaded the full version of the correct software driver for (windows 7 64 bit).

  The installation fails:

  "This registry key does not exist.  It can interfere with the installation.  Continue to proceed at your own risk.

  Registry key HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\RocketLife\HP Photo Creations

  Manufacturer: HP

  Windows updates are up-to-date

  Any suggestions?

  Hello Lions99,

  Thank you for your response.  I solved the problem before I saw your suggestion so I telI you what I did and then close this issue.

  It seems that the problem resulted from an uninstall failed HP Photo Creations.   On the recommendation of another user of the forum, I downloaded Revo Uninstaller and run a tool called "junk file cleaning."  That did the trick I think because I then ran the driver full features intall (use Revo just in case) and it worked.

• Extremely slow printing wireless with HP Photosmart Premium C309g-m

  I see extremely slow print speeds when printing from a Mac or a Windows XP system on a new printer HP Photosmart Premium C309g-m wireless. The printer starts printing immediately when I request a print, but it only prints one line. It will take about 15 minutes then to print the rest of the page, each print after a very long break line. Print demo page doesn't exhibit this problem, only documents of programs such as Word 2008, Safari, and Firefox (I tried firefox on PC and Mac) are affected.
  
  If I connect to the printer via a USB connection it prints very well, so this problem seems to be the only wireless printing.
  
  Printer: HP Photosmart Premium C309g-m
  Computer: Mac mini (late 2009 model) (also tried a Windows XP laptop, by comparison using the latest drivers from the HP website)
  OS: Mac OS X 10.6.2 with all available updates installed
  Method of connection: cable Ethernet connection to the router wireless
  Printer drivers: version 2.2.1 (Apple provided, drivers HP never installed as system comes with 10.6)
  Wireless router: Apple TimeCapsule (early 2009) 1 TB, honing a/d and modes of b/g on 2.4 and 5 GHz. TimeCapsule is in transition as the DSL modem handles DHCP service mode
  Encryption: WPA2 Personal, no MAC filtering or hide the SSID.

  IP addressing scheme: all addresses are distributed by the server DHCP without reservation of any kind

  The TimeCapsule is sitting three inches from the printer and the printer indicates the complete signal. Connecting the printer to the wireless network and setup of the printer on the Mac went off without a hitch. Only when you print a test document discover us the problem. The wireless network will behave as expected when you access Internet from Mac and Windows devices (tested with a laptop computer Dell XP and a MacBook with OS X 10.6.2), so I don't see any problem with the wireless network together.
  
  Attempt to use:
  1 reboot and power off, wait, restart the computer
  2 reset the print subsystem, the printer off and on again and reinstall the printer

  3. disconnect the power to the printer and let it sit for several minutes before trying to print wireless.
  
  None of them worked.

  I don't know exactly what is happening... I'll have to think about.

  Looks like you're running with the current configuration.

  Can we call this resolved?

• Photosmart C410A: HP Solution Center install on 2 PCs for the same printer

  I have two PCs running Windows 7 Professional 64 - bit and a HP Photosmart C410A printer, wireless connections to my network.  The solution Center has worked well on the first PC, it was installed on.  I tried to install it on my new PC, but I get an error on USB hardware and software; It will not attempt to connect and install wireless.

  My question: can you run Solution Center HP of two different PC for the same printer Photosmart C410A?

  Thank you.

  Yes,

  You can install the HP Solution Center software on several computers connected to the same netowrk as your printer.

  Try following these steps to solve the USB error during installation:

  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• On photosmart C410a default print settings

  I want to put the default value of the print on a black PhotoSmart C410a only settings. How can I do this?

  OK, when you start a print job in the window that appears before you print, make sure that the arrow next to the name of the printer is oriented upward.  If this is not the case, click it.

  Now, in the Presets Select plain paper, Fast Draft, black and white.  This will 'stick' until the next time that you choose.

  If you're wondering how to disable completely the use of color ink, it's a totally different subject...

• New printer hp photosmart c410a all-in-one

  I use the new printer hp photosmart c410a all-in-one and have a paper jam in the printer.

  Need help I can not easily see the paper blocked under the trays.

  Thank you!

  Hello

  Below the document should help you remove the paper jam:

  http://support.HP.com/us-en/document/c02110413

  Hope the information provided will help you!

• Can I fax with a photosmart C410a e?

  Can I set up and fax with my Photosmart C410a printer?

  @dnglostine
  EFax does not support the printer you have. The printer that support eFax is rated HP Photosmart 7510 Series, HP Envy, HP Photosmart eStation C510a 110 series and the HP Photosmart 6520. The printer that you have listed support regular analog fax.

• HP Photosmart c410a

  I use printer HP Photosmart c410a. It includes four locations for format regular cartridges black, yellow, cyan and magenta. It also has a fifth slot for a black size cartridge double. At present, regular size the black cartridge is empty, yellow cartridges, cyan and magenta are full, and the double black cartridge is full. When I print a document, black and white or color, no black ink is printed. The double-black cartridge should not substitute for single-black in this case? If not, what is the point of having a double-black cartridge? Is there a place on the Panel of the printer or HP software where I need to configure the printer to use the double-black cartridge?

  Thanks in advance for any helpful pointers.

  You are welcome.

  The HP Photosmart C410 does not have two black ink cartridges, the location on the left is for the Photo only ink cartridge:

  You can find a brand of cartridge near the housing itself, very good housing, a brand "Pentagon" is intendef for black or the Black XL cartridge, very left slot is for the Photo cartridge only, you can find different shape to identify the correct cartridge (as different brand is presented in the document linked from my previous post.

  You can find ink cartridges compatible to the C410 listed in HP suresupply:

  

• Photosmart C410a

  Hello

  Please can you help. I have Photosmart C410a printer / scanner, uninstalled and now have re installed all the software and updates

  Ive done tests and he said everything is fine BUT when I go into the Centre of solution

  It is said

  HP Solution Center can not run because your device installation is not complete

  Please connect the USB cable or re run implementation of program installation for a network installation CD

  If it does not end the insatllaion, or you do not have CD Hp help files to click on the start menu.

  If done all he said and I still get the above message, even when the disc in.

  my printer/scanner worked perfectly until the around October 15 last time I scanned using the solution Center

  I use windows 7 home preimum 64 and have a computer laptop sony

  Have tried to solve the problems with the windows service install :-(

  but get an error 2732

  also 7z558A4

  Thank you very much

  Hello Karkey243,

  Welcome to the HP Forums.

  Seeing that you have already uninstalled the software and drivers and tried re - add, I suggest we try the HP printer install wizard for Windows.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• Photosmart C410A: Cannot install the Driver

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD APU A8-3820 with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5844
  Graphics card: AMD Radeon HD 6550D, 256 MB
  Hard disks: C: Total - Mo 940455, Free - Mo 855102; H: total - Mo 305234, Free - 170309 MB; Total I: - 7 MB, free - 0 MB;
  Motherboard: gateway, SX2370
  Antivirus: Norton Internet Security, updated and activated

  Apparently after a Windows Update, computer of my wife, which is connected to our printer via ethernet through our Linksys E3000 router connection, lost that connection. As the driver was out of date anyway, I downloaded just the updated driver and tried to install it after checking that all traces of the old version have been removed using the HP uninstaller program.

  Inummerable times today, tried to install the driver. I either get the the point where installation asks what kind of connection I have and when it shows via ethernet I get an error message about the MpsSvc (Windows 7 firewall) be stopped or the installation fails generate a message that says missing a setupfile. I tried to disable the firewall in Norton Internet Security and AV and the installation always fails. I tried to turn on the Windows Firewall, via the the Task Manager (with the NIS firewall off) nothing works.

  One of the solutions I found on this forum with an HP Expert was to use the complete package to install the driver. Even if I'm NOT all the programs that come with it (there is the possibility to choose what you wanted but not more) I tried. I still received the message to set firewall scenario and then had to uninstall all the programs I didn't want in the first place.

  There are two other computers in the House connected wireless to the printer and both work very well. I even tried the road wireless with this computer, nothing is done.

  I know I'm not the only one we encounter this problem as I saw other postings but I have yet to see a solution that works. I'm trying not to get both frustrated and angry but it must be an otherwise difficult problem to solve. Before the update Windows and update the driver of HP, this computer worked fine with this printer. There is a conflict between HP software and Windows 7. Please give me a solution that actually works.

  I finally found a relatively simple solution that worked. First of all, I unzipped the driver of a CD-based package. Then, I clicked on the Start button and open "devices and printers". Then I clcked on "add a printer".  I chose "add a network printer". As Windows did not have the selected HP C410a among the choices of the printer, I have disk driver and connected to the CD file. Windows finds the driver, installed and everything works as it should. Certainly, the icon of the printer is not the C410A but all the functionality of software works so I don't care.

  On my wife's computer, I followed the same procedure except that I chose the option "Local printer", as his office is connected to the router via an ethernet cable. For some reason, his computer also had the HP C410A among printers whose drivers available and Windows loading automatically good. Everything is fine with his computer in terms be able to print. Again, not the cool little icon C410A under "Devices and printers", but it works.

  The really good part of doing it this way is that I didn't have to install all the unwanted HP softerware which comes with the "complete package".

  I appreciate everyone's help.

• Slow printing Officejet J3608

  Extremely slow printing recently became a problem with my all-in-one Officejet J3608 printer.

  I have downloaded and run HP Print & Scan doctor. Everything checked out OK. Interestingly, the test page printed quickly and normally, but if I print a page of test or any file word.doc, its performance is very, very slowly.

  I installed Windows 7 and I just downloaded and installed the full driver for this printer package. No change in this situation. I also noticed that if I want to print several copies of a document, 2 copies and the following print quickly in contrast to the first copy!

  No error message. In the window of the printer, it just says: "... Printing" that it prints a single pass, then pauses, then another pass.

  Conducted a system Windows check but found nothing unusual.

  Dear all:

  My slow printing problem has been resolved. Malware object, PUP. Funmoods, has been the culprint. 50 times of this malware have been detected and eliminated by bytes Malware Anti-Malware software downloaded on Download.com.

  After a full of some 300 000 files scane, MBAM has identified the cause of my slow printing.

  This can be useful to other people whose efforts have failed to solve their problems. So, obviously, that there is nothing wrong with the HP Officejet J3608 printer drivers.

  Collis Davis

  Philippines

• HP 8600 slow printing of diagrams and color photos

  I have a desktop HP 8600 printer pro jet and it's very very slow at the color print and diagrams (colored or not). I aligned the printer and clean the print head but it is still slow and I mean slow 2 5 minutes from printing a page.

  I also used the HP scanner/doctor and everything is fine with the printer is brand new.

  Help, please!

  Hello there bamitssam21,

  Welcome to the Forums

  I saw your slow printing problem you are having with your Officejet Pro 8600. I noticed that you have ran a print head cleaning, alignment and print and Scan Dr. indicates no error. There could be several reasons why slow printing occurs, the power of the printer for the program you are printing from (if the problem happens only in a single program) or even the pilot.

  I'll give you some suggestions to try and I hope that we can get rid of this problem!

  First, reset the printer and when you plug it back, just please make sure it is plugged directly into the wall socket. Avoid bars, surge protectors, nothing more.

  This may sound weird, but sometimes it really helps and solves the problem.

  Then, update the printers firmware: get the latest Firmware and product updates

  If the problem persists, follow this guide for printing slow: slow printing

  Good luck! I would like to know how to get you out, and if so, I'll help you gladly further.

  Thank you

• DeskJet 3755: Extremely slow printing, work stuck in the print queue

  Hey, I just bought a HP all-in-one Deskjet 3755 and put it in place and recorded. It is connected to my network, but I'm having a few problems.

  (1) the printer will only print jobs when it is connected to my computer by USB, even if I connected wireless.

  (2) print PDF print jobs EXTREMELY SLOWLY, over a minute for a page of text.

  Please do not just link me to support.hp.com pages... for some reason, they do not load on my computer (see the place completely empty, even if the HP site support work and charges).

  Thank you!!!

  Hey @anb9495,

  Welcome to the Forums of HP's Support.

  I see that you have some problems with the slowness of printing for the all-in-one printer Deskjet 3755. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to troubleshoot slow printing with your printer.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• DeskJet 1050: Deskjet 1050 slow printing

  Given that I have installed the printer software 1050 10 windows did not have the following problems: when I print a document feeds the paper, the printer then does nothing for a while, then part of prints, prints, stalls, stalls... the document is finished. If I photocopy a document it takes forever to print with it's stop start the effect. Any ideas? Dave

  Hi @Neptuno,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you are using a printer all-in-one HP Deskjet 1050 with a Windows 10 PC and the printer takes a long time to print or even copy. I would like to help with that.

  I would start by doing a Reset of the power on the printer.

  

  Here is the document of support designed to be used with this type of problem - slow printing.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!