slow WiFi on wrt1200ac

I've just set up a new wrt1200ac. wire speed is 309Mbps but the speed of the wifi is 28Mbps. is something bad is the faulty router setup?

Parameters:

  1. Enable the prioritization of media with a bandwidth downstream speed of dowload www.speedtest.net value * 1024
  2. Activate the Support WMM (default)
  3. Mixture of 5 GHz wireless protocol
  4. Auto width for the 5 GHz wireless channel
  5. 2.4 wireless protocol "N-only" or "b/g/n only.
  6. Auto width for 2.4 Ghz wireless channel
  7. The 5 GHz and 2.4 Ghz Wireless Security "WPA2 Personal" unmixed

If the MP does not work for you turn it off, but it is important it be correctly configured at least once.

Tags: Linksys Routers

Similar Questions

  • Slow WiFi

    I have a slow WiFi connection. I use a newer MacBookPro and have no ethernet to make a direct connection. I had a router to the South, but just before he went to the South, I was getting 220Mbps down speeds and I just got a new modem D-Link and he got setup one moment I'm stuck on 23Mbps. My other MacBook which is oldest to 125Mbps downwards. My desktop Mac mini becomes the same as my remarks 23Mbps Pro. If I connect directly the mini I get a compatible 220Mbps speed. I've been with comcast today and they don't see any problems with a direct link and 220Mbps, and my other book on wifi getting an Im 123Mbps sure that the issue isn't with comcast. I don't know what settings are now the speed down. I know that this is not the new router either because I have an old router which is at the same speed but the router that went towards the South allowed me to get the 220Mbps via wifi when it was working fine. The D-Link is new and seems to be ok. My other was a router Netgar N900. The D-Link is the AC-3150, a pretty radical router. The interface is a bit different, but it has the same information as the other routers.

    IM pretty good setting up networks, but this one has pulling me my hair out.

    I can't connect directly, otherwise I'd do it but why with a laptop. I also connected directly with my mini and who then shared and still only got 23Mbps speeds. My service is minimum 150Mbps downwards.

    Someone has an idea of what might be wrong. I reset and rebooted several times. My connection is DHCP but I did no changes using this or static. I checked the settings between the two laptops, and there is nothing else that I can see.

    I need help.

    Pete

    Fixed a problem. I have the new D-Link AC3150 Ultra WiFi router. It is supposed to be an intelligent router that gives you the best radio for the fastest speeds available. Maybe it's not so smart after all. I disabled the smart function and configuring a dual network. One for the other for 5G and 2.4 g. I put the 2.4 for older speeds and 5G for speed N/AC Protocol. After setting this up, I chose the 5G network and now my speeds are shouting along to 224Mbps and solid as a rock.

    Other than to be not so smart at least on a Mac platform I see no problem still with this router. I will pass along this information for D-Link. If you purchased one of these and your speed is way slower than expected then you need disable the smart function and have just two separate networks. Catch 5G as it is young, but don't forget that you only let the speed N or AC. Don't let not default on older slower speeds.

    Pete

  • Satellite L50 - B has slow WiFi speed

    Hello

    I got this laptop last month but I'm really disappointed because it was a bloody slow wifi connection.

    I've already updated my wireless drivers, but nothing happens. The funny thing is I have an another old laptop, but it has a speed great wifi.

    I already try to do a speedtest of them both in the same place at the same time but my acer got 10-15mbps but my toshiba receives only 1-2 Mbps and it is very frustrating.

    I have a Qualcomm Atheros AR956x Wireless Network Adapter and I have read a few problems with this adapter. Please if someone who can help me with my problem.

    I'll sort to buy an external wifi adapter if necessary.

    Using some devices Bluetooth as part of this Satellite phone?
    Bluetooth is turned on? If so, turn the Bluetooth off and test the performance of the WiFi.

    I read in some discussions that the simultaneous use of WiFi and Bluetooth may affect the performance of the Wifi.

  • Slow WiFi with Broadcom 4322

    After upgrading my laptop HP DV7 with Windows 8, I found my wireless connection was extremely slow. My card is a Broadcom 4322AG. This seems to be the same problem as has been in the forum


    Slow WiFi with Broadcom 4322 and Windows 8 CP.

    Following the advice in this forum, I changed to TKIP AES security and everything seems to work properly.

    Thanks a lot for sharing your solution! My problem was that I downloaded at least 1 Mbit/s and transferred approximately 15 Mbps. Then I changed to TKIP, just as you said and now I'm moving 21 Mbps of download and 19 Mbps downloading. All this on a MacBook 5.1 :)

  • Slow WiFi, emails arriving intermittently.

    HI for Sierra update wifi going slow to stop. Emails from Apple happen intermittently on imac, but these two questions are OK on iphone 6 and 3rd gen iPad.

    Any help would be appreciated.

    Check your location in system preferences > Date & time.

    Check system preferences > Security & privacy that location services is checked.

    Click on location Services.

    Select the Services system (bottom of list)

  • Slow WiFi on MacBook Air

    I tried searching but preliminary questions are old or unanswered. My MacBook Air El Capitan 10.11.5 is extremely slow on my wifi, with loading sites slowly or not at all. My Dell laptop 3 + year, sitting right next to the Mac quickly navigates the wifi even.

    I don't know what changes I can make network preferences (via DHCP, automatically configure the MAC address, etc.) Any suggestions?

    Please read using the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support. It can offer useful suggestions to improve performance of your Mac wireless.

  • slow WiFi with 7.6.7

    I have the extreme of the airport which has been upgraded to 7.6.7.  Since upgrading my wifi connections are slow.  If the 2 devices are on the wifi at the same time the second device running very slowly.  This problem did not exist before the 7.6.7 upgrade.

    How can I fix this problem?

    Have you thought to go back to the previous version of the firmware as a possible solution? Or do you want to try it first to other things?

    Users discover that the firmware update will not fix a problem that they did not... but sometimes, it will create a new they had not before.

  • Slow wifi transfer rates with Airport Extreme network.

    I have an Airport extreme Rev 5 and am trying to transfer files between 2 Mac on the network. Everything works fine, but the transfer speed is only about 2.5 meg per second. Should get more than that?

    Everything works well, I get my full bandwidth from my ISP (11.8 Mbps) when downloading via wifi, it s just during the transfer of files within the wifi network that things are slowing down.

    Thanks for any help

    Tim

    Wireless is inefficient when you double jump... This means that... both computers are transfer of files via the Wi - Fi because wireless deals actually double the packages... So he immediately reduces speed by 50%.

    Let us ensure that we are using right units first.

    1. your download from the internet is measured in bits per second... Please use b for forests.

    2. your file transfer is measured in bytes per second... Please use B for bytes.

    So, if you look at the monitor of activity... a copy of computer file wireless to NAS (ethernet) ran at 38-40 MB/s

    If I transfer to another computer that is also the wireless speed would be halved. Or worse... (see below, even with AC wireless is far worse) depends on the slower links.

    So how do you measure the speed of file transfer and is it bits or bytes per second?

    What is the speed of connection on each computer.

    Hold down the option key and click on the fan wireless.

    You can see that this computer has a 450Mbps link speed... It will never transfer files to that more than half, but you wait for connections at full speed to get the best links.

    My new computer...

    So if I transfer the computer file to another, it looks like this.

    Even with that wireless, it's much slower than the SIN that has ethernet and spinning drive... The computer has SSD.

  • the Airport extreme, giving a slow wifi connection

    Hello

    I've got my download speed of 200 Mbps cable company. I checked a good signal by plugging directly in he back of the Modem (to remove the photo Airport extreme wifi.) ... I have 221Mbps actually...

    However, once I'm going to plug in the Airport Extreme and text my speed on wifi, I get only between 24 Mbps or max after several trials of 54 Mbps on download... I should get just under 200 Mbit/s because of the normal fall through wifi... However, not to the extreme I loss I get...

    Tuesday Apple Support has helped me to perform a reboot of the router and I have been good to get 198Mbps... It is here 2 days later and I'm back down to 24 Mbps...

    I tried to redo the reboot: unplug the unit, hold down the reset button, then while holding down the reset button, add power on and continue now stuck until it flashes yellow... But curiously, after it flashes it goes straight to the green... (never asking me to airport utility to add a password)

    My Wifi speed stink...

    What continues with this device... anyone have recommendations?

    I already proved the cable line and the modem (with the support of motorola)...

    Thank you

    Most likely you have a faulty AirPort Extreme. Please ask Apple to replace this unit for you.

    If you wish to renew a reset, follow the instructions very carefully:

    Turning off AirPort Extreme

    Wait 7 - 8 seconds

    Hold the first reset button... and hold in an additional 7 to 8 seconds while simultaneously you reconnect the power on the AirPort Extreme.

    Release the reset button to zero after the period of detention

    Allow a minute for the AirPort Extreme restart. The light will be Orange fixed for 15-20 seconds about, then turn to flashing orange slowly after about 30 seconds

    A slow amber flashing light... about once per second... confirms that the airport has been reset and you can set it up again.

  • Satellite C50-B16T - slow WiFi connection using battery power

    Hello

    I have a new Satellite C50-B16T and discovered that when I take it off the power, wifi is slowing down as HELL, to the point that I can't even use it and have to connect it to the power.

    I saw a few solutions on a TX adjustment, but my Satellite actually doesn't have this option, and if this is the case, I don't know how to find it and why it is happening.
    Would really appreciate if anyone has any suggestions, since my laptop is now essentially a desktop all the time, which makes its pretty useless goal...

    Go to-> WLan card device manager-> properties-> tab power management

    Here, uncheck the option that allows the system to disable or control the unit in order to save energy.

    Also check the tab 'Advanced' for possible energy saving options.

  • Equium P200 Series - slow WiFi!

    Wireless for my laptop Equium P200 series is very slow, often up to 0.5 MB. My hub has been tested and receives 8 MB and the laptop gets 8 MB when the hub is connected to the laptop, just very slow when you are working on a wireless connection, and BT believes that it is a question of technology. Anyone know why and have a solution? Thank you.

    Hello

    You need a BIOS update!
    Take a look at the European driver Toshiba page and download the latest BIOS for your notebook from the series.

    After this test WiFi connection again!

    I found a guy who could solve similar issued by the update of the BIOS!

  • WNDR3700 very slow wifi

    Seems all of a sudden that my wireless is slow and weak.

    I get download speeds of 60 Mbit/s connected to the desktop via the router, but only about 10 with wifi. Router is 2pi away.

    I looked in the settings and tried a few things but no help at all. Hope someone has some ideas, thanks

    I did download speed tests using residential Road Runners speed test. Only 10 Mbps over 60 wired wireless

    This is a problem that happens all of a sudden.

    Did a reset and still poor wireless network. Tried to change channels once or twice as suggested on various sites. No effect at all. Cell phones would connect only barely 3 ft away from the modem. I think it is just wore out

    Purchased a new WNDR4300 and works perfectly out of the box

  • V1.0.0.56_1.0.28 slow Wifi R8500

    Trying to resolve the wifi problems slow speed. Everyone has problems with the last update of the firmware?

    Wired Speedtest:

    Speedtest wireless [display 2.4 Ghz & 5 Ghz approximately the same speed] (iPhone 6) about 3 feet from the router:

    Wireless settings:

    2.4 Ghz - active

    WPA2-PSK AES]

    Channel 4

    Mode: up to 1000 Mbps

    5 GHz - compatible

    Smart Connect - enabled

    WPA2-PSK AES]

    Channel 44 + 153

    Mode: up to 2165 Mbps

    Advanced wireless settings:

    Beamforming: disabled and enabled, no difference.

    Troubleshooting suggestions?

    Indeed, my router has been replaced, however, this does not solve the problem. A beta firmware has finally solved the problem.

  • Very slow WiFi on the 3G xoom with update 3.2

    Hi all

    Was wondering if anyone else has the same problem.

    I bought the unit a few days before and same day updated to Android 3.2 version. I use internet on my Wifi at home and have a Netgear - WGR614 router. Browsing speed is very very slow and do not open many of the sites.

    The intensity of the signal on the xoom is - (asu 3-105 DBM).

    Is this a problem with the Android 3.2 update or my wifi at home is low? I was able to reset the tab to the original version?

    any help is very appreciated.

  • ProBook 450 G2: Slow WiFi

    Hello

    I have quite annoying problem on my Probook 450 2 Win7 64 bit authentic. WiFi speed is terrible slow and sometimes unstable, however original driver from Realtek RTL8723BE 802.11b/g/n has been installed since the HP Web site.

    Have an idea to solve this problem?

    THX, M.

    1. open the Device Manager

    2. develop the network card

    3. double-click on Realtek RTL8723BE 802.11 b/g/n WiFi Adapter

    4. go to the power management tab

    5 uncheck allow the computer to turn off this device to save power

    6. go to the tab Advanced

    7 find the WiFi Configuration option

    8 replace the value with WiFi

    9. click on OK

    10. wireless adapter is disabled and enabled

    11 restart the laptop

Maybe you are looking for

  • (S2800-400) Card PCMCIA USB 2.0 problem

    Well, recently I bought this ST Labs USB 2.0 card for my laptop. When I tried to install the drivers I just got a blue screen when the pilots was almost innstalled. It was on Win XP, I got the advice of a friend to change my OS for Win 2000, I did th

  • Satellite Pro A200-1F9: problem Internet after the map change Wi - Fi - SOLUTION

    Because my previous thread was closed, I have to open a new one just for this.I solved this problem in this http://www.notebookforums.com/t/225429/broken-wireless-hardware-switch-fix way and as far as I know it comes to BIOS. Now I have the internet

  • Re: Satellite L655-19 - screen promblem or not

    Hello. Two weeks ago, that I have a laptop Toshiba Satellite L655 - 19(d) to private use. At the beginning I do not pay attention to the quality of the screen image. But now, even remotely from the meter, I see that the distance between pixels. That'

  • x 41 wireless controller problem... ?

    Hi I have here x 41, xp... can anyone help me regarding the right software to install the wifi controller?... I can detect a connection made in a strong signal, but I can not connect... I also try to another wifi hotspot... Please give me the right s

  • Is there a limit for Windows 2008 member server how can be added to an area of Std SBS 2011?

    I have a client with 60 workstations, they the thoughts that they need separate Ad, a separate file and print... I mean get SBS 2011 with the added LOB servers They want to know how can you add? Best regards, Scott Whitwell