Smartphones blackBerry at startup error message

Similar Questions

• Startup error message: "Microsoft Mobile PC presentation adaptability Client has stopped working".

  I recently tried to install SP2 to Vista, but it failed. I tried all the resolutions posted, but it is not always correct it. Later, I started my Vista (automatically restored to SP1) and it came with a mistake, "Microsoft Mobile PC presentation adaptability Client has stopped working". I tried searching on the net for similar problems, but I could not find any solution. He comes back every time you start, after that the background, shortcuts and the system tray loaded. This error started showing when I tried to install SP2, but he failed and returned to changes. I think that something could have gone wrong and that's why it shows this message.   Today I tried the system restore to the restore point JUST before I tried to install SP2, but it ALSO failed and brought me back to the State.
  I'm not sure if it's related, but I'm also no longer be able to use Windows Media Center, as every time I start it I immediately receive the error message "Media Center has stopped working".
  My computer:
  Gateway M6842B laptop
  Version of Windows Vista SP1 32-bit
  Intel Core 2 CPU
  T5300 @1. 73 GHZ 1.73 GHZ
  2.00 GB OF RAM

  Hi zensurferboi,
   
  First, we will check if we get error safe mode, start the computer in Safe Mode reboot and press the F8 key for about four to five times. You'll see the Mode without failure listed in the advanced window options, select Safe Mode, and then press ENTER.
   
  Check if the error mode without failure.
   
  If the startup error message does not appear safe mode, I recommend you to place the computer in a clean boot state, and check if the problem occurs in a clean boot state.
   
  To put the computer in a clean boot state, follow these steps:
   
  Perform a clean boot
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  a. log in the computer using an account with administrator rights.
   
  b. click Start , type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
   
  c. under the general tab, click Selective startup, and then clear the Load Startup items check box.
  (The box use the Boot file is not available.)
   
  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK, and then click restart.
   
  Once the computer restarts, check if you get the error of starting.
   
  Reset the computer to start as usual
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , type msconfig.exe in the Start Search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. On the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If you don't receive the start-up error message after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• BlackBerry smartphone App Inaccessible World - Error Message "App World has been blocked"

  Dear all,

  I recently bought one of mark Sprint Blackberry Curve 9350 (in excellent condition) on Amazon, and the phone is fully functional, except that whenever I try to access the Blackberry App World I get a pop-up message reading "App World has been blocked".

  At first, when I changed my line of Sprint prior to my new curve, the phone has completely wiped and reset.  I started to use the various functions and only a few days later, realized that I can't access App World.  I talk to several representatives of Sprint and in the few days has taken the following steps, all without success:

  Uninstalled and reinstalled App World

  Do you have a Batt pull with the phone on, uninstalled and reinstalled App World and made another Batt-sweater

  Addict connected the phone to my laptop computer and uninstalled App World via Blackberry Desktop Manager

  As I bought the phone on Amazon, I do not think the guaranteed protection applies.  However, it seems incongruous that all other applications and the phone features work, with the exception of the App World.

  Could someone please suggest measures to address the problem and to App World accessible?

  Also, could someone please advise if I can bypass the App World app and install Blackberry apps on the curve directly through the Blackberry Desktop Manager and, if so, what steps are?

  Many thanks in advance,

  Colby

  Hello

  From this description, I suspect that a latent policy is on your BB that blocks AW. Normally, the error message would say more than that you reported and would be more indicative... but it's I think of what you have provided.

  To clean, you have actually several things you need to do... from checking to see if it is indeed the case:

  • KB30076 How to check for an it on a BlackBerry smartphone policy

  Unfortunately, there are also a few situations with 'stealth' COMPUTER strategies that exist, but are not actually display as per the above. Again, the complete error message may have provided a better hint this topic.

  However, I think you need to take steps in any case, especially in light of your method of supply. Reference:

  • KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

  Although it may look as if someone has or do you a lot of that, I think you need to see it again to be sure. None of these methods to WIPE would actually have relatively far BB COMPUTING policy. Instead, you must run the ResetToFactory process, which I recommend you do instead of (or in addition to) the WIPE which recommends the KB:

  • KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  In addition, you must be careful if you have already placed on the BB data that you need to maintain. You can backup/restore your device before and after these wipes, but you must be careful when you restore... don't do a full restore or you will simply put the return policy on board IT again. On the contrary, do a selective restore only the databases that you need and be 100% sure to avoid any database which have nothing to do with politics:

  • KB03974 List of database for the blackBerry smartphone

  Finally... given this situation, it is quite possible that there are additional challenges with this specific BB. For example, if the BRI account is locked due to the BB being previously reported as lost or stolen, nothing don't you can do about it, and you will never be able to have all the services. But Orange should definitely be able to tell if that is the case.

  cbhjenkins wrote:

  Also, could someone please advise if I can bypass the App World app and install Blackberry apps on the curve directly through the Blackberry Desktop Manager and, if so, what steps are?

  These methods exist:

  • KB14473 How to install an application on a smart phone BlackBerry with the BlackBerry Desktop Software
  • KB04670 Install a third-party application with the Application Loader
  • KB28715 How to install BlackBerry App World applications, using a computer system

  However, there is no way of knowing if the it policy will also block these methods.

  Good luck and let us know!

• BlackBerry Smartphones-Facebook, Twitter, Myspace Error Message.

  Hey everybody!

  I recently got a new BB Bold 9700 brnd on a package that allows you to get on the internet, etc etc. The guy I bought the phone out of Said (AT & T Store) data plan would be perfect for Social Networking Etc. well, anyway here is some information on my phone:

  Type: AT & T

  OS: Last Version, just updated as of November 9, 2010

  Also, everything is up-to-date.

  I tried to restart and everything. The error message I get is, 'we cannot reach the server of facebook at the moment. Please try again later. (100) I also saw where others on google said they encounter the same problem. As for Twitter, it says I have to update my data plan when it's the higher package and for myspace, it says I have an invalid password when it is 100% correct.

  If someone could please help me with this problem I would be SO happy! I'm addicted to Facebook. Laughing out loud.

  Thanks in advance

  Hi and welcome to the Forums!

  See this FAQ for a generic description of the different levels of data plans to:

  • http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

  As for your specific needs, I suggest to make a good list of exactly the services you want and then talk again with a representative from ATT to know exactly which of their data plans is required to enable the services you want. If I had to guess, I would say that the rep that you spoke was misinformed and put you a map of too low for what you want.

  Good luck!

• Smartphones blackBerry Eception Exception errors

  Hello

  I am desperately hoping someone can help!

  I have a BB Pearl 3 G with BBOS6

  I was updating some apps (Whatsapp, BBM). The phone asked to restart, I said that was fine.

  When he had finished his restart e-mail, sms and browser icoms no longer worked (I would like to click on them and nothing would happen at all) and the phone would freeze.

  The error messages I get are:

  Eception exception: Application net_rim_bb_messaging_app (78) does not...

  and

  Eception exception: Application net_rim_bb_browser_daemon (96) does not...

  Once I managed to get the error 523 reset I did but it did not help.

  I tried several resets hard (remove the battery when the phone is turned on, left for several hours and then replaced) all to nothing does not.

  I can't find a reference to these errors online.

  Someone at - it a solution?

  Help, please!

  Nicla

  Hello and welcome to the community!

  There is virtually no diagnosis of those - they are the equivalent of random errors in Windows for which trace the root cause is futile. Basically, here's the last out in the programming code - some event occurred for which there is no event handler in the code. The patch is an update of the code that handles the event... but, again, what is the event is almost impossible. So, there are a few things to try:

  Sometimes, the code simply is damaged and needs to be updated - just like a reboot:

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  If it doesn't boot properly, then you need to try Safe Mode:

  • KB17877 How to start a BlackBerry smartphone in safe mode

  There may be a code updated to the value of the carrier - check out them through this Portal:

  • http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  The toughest possible causes are a bad application behave. To find it, there are two options. Is to see if you can read the log file:

  Go to the home screen. Hold down the "alt" key and type "lglg". (You won't see anything as you type). This will bring up the log file. Scroll down (probably a lot of pages) until you see a line that says "eception execption. Click on this line. The application name will be in the info. Alternative methods to implement the newspapers are in this KB:

  • KB05349 How to activate, view, and extract the the event logs on a BlackBerry smartphone

  The other method is to remove the apps one at a time, wait a while between the two (I usually recommend a week), until the problem stops... revealing the offending application. Yet another method is to recharge the BB OS itself, leaving little time between the addition of other applications on the BB in order to be able to determine exactly what is the cause.

  Good luck and let us know!

• Synchronization to Smartphones blackBerry - specific connector error problem

  Suddenly, I get the following message when I try to sync my curve for my Windows 7 PC.  "Connector specific error.

  It means maybe the son died, but, if so, how it would link?

  Hello Superwall,

  The following article will provide you with more information on this error message:

  "Connector specific error" when syncing with a BlackBerry smartphone running BlackBerry 6 or 7 BlackBerry - http://www.BlackBerry.com/BTSC/KB26181

  We hope this helps.

  Thank you.

• All in one printer 5510: old printer at startup error message

  Hi all, I recently upgraded my printer Photosmart 5510 to 5540 desire. I installed a new printer and removed the old. Since then, I get this error message whenever I start the computer:

  There is a problem starting: C:\Program Files\HP\HPPhotosmart5510series\bin\HPStatus BL.dll

  The specific module could not be found

  I tried to reinstall the old printer, I deleted again, I went through HP troubleshooting... nothing!

  Someone has an idea? Thanks for your help.

  Hello
  From file Exploer type %appdata%\Microsoft\Windows\Start Menu\Programs\Startup in the address bar and press ENTER.
  Delete the shortcut to monitor alerts for Non-Existing printer ink and the error should appear is no longer.

  Kind regards
  Shlomi

• Startup error message: error loading of C:\ WINDOWS\azizoqocefuwejat.dll

  Nice day

  I sent my computer to be restored and cleaned of the virus. (Computer HP with Windows XP, Service pack 3)

  Error message appeared after about third computer startup.

  Error loading of C:\ WINDOWS\azizoqocefuwejat.dll

  The specified module could not be found.

  Unplugged the computer and set it aside for a fight a year.

  Not dusted him off and in the hope to use again.

  Removed all kinds of programs (IOBIT, etc.)

  Because the computer was restored, began upgrading computer from Windows Update Update Manager

  then installed the Norton 360, 30 trial days

  analyses complete completed camps, who has not identified problems

  Disk Cleanup

  Registry cleaning

  Googled the dll and nothing at all is listed

  What is this error message?

  How can I get rid of this error message?

  I have several computers and my cell phones set up shared radio router, do I need to worry about cross-contamination?

  Thanks in advance for your time and your consideration.

  Additional thoughts:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you actually solve the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• After the startup error message: C:Docume~1\owner\Locals~1\Temp\dwm.exe__how I can fix it.

  I ran Malwarebytes Anti-Malware and the following came and I deleted everything that came.  Then, I get the error that I mentioned:

  Malwarebytes' Anti-Malware 1.46
  www.Malwarebytes.org

  Database version: 4725

  Windows 5.1.2600 Service Pack 3
  Internet Explorer 8.0.6001.18702

  30/09/2010 21:36:15
  MBAM-log-2010-09-30 (36-21-15) .txt

  Scan type: quick scan
  Objects scanned: 170298
  Time elapsed: 1 hour (s), 32 minute (s), 59 second (s)

  Memory processes infected: 3
  Memory Modules infected: 0
  Registry keys infected: 0
  Registry values infected: 1
  The infected registry data: 1
  Folders infected: 0
  Files infected: 6

  Process memory infected:
  C:\Documents and Data\Microsoft\svchost.exe Data (Trojan.Downloader.Gen)-> unloaded successfully process.
  C:\Documents and Settings\Temp\dwm.exe owner (Trojan.Downloader.Gen)-> unloaded successfully process.
  C:\Documents and Data\Microsoft\Windows\shell.exe Data (Trojan.Shell)-> unloaded successfully process.

  Memory infected:
  (No malicious items detected)

  Infected registry keys:
  (No malicious items detected)

  The registry is infected:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\svchost (Trojan.Downloader.Gen)-> quarantined and deleted successfully.

  Infected registry data items:
  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\Shell (Hijack.Shell)-> Bad: (explorer.exe, C:\Documents and Data Data\Microsoft\Windows\shell.exe) good: (Explorer.exe)-> quarantined and deleted successfully.

  Infected files:
  (No malicious items detected)

  Infected files:
  C:\Documents and Data\Microsoft\svchost.exe Data (Trojan.Downloader.Gen)-> quarantined and deleted successfully.
  C:\Documents and Settings\Temp\dwm.exe owner (Trojan.Downloader.Gen)-> quarantined and deleted successfully.
  C:\Documents and Settings\Temp\1EF.exe owner (Trojan.Downloader.Gen)-> quarantined and deleted successfully.
  C:\Documents and Settings\Temp\24D.exe owner (Trojan.Downloader.Gen)-> quarantined and deleted successfully.
  C:\Documents and owner Settings\Temporary Internet Files\Content.IE5\SCGCF3IX\update[1].exe (Spyware.Passwords.XGen)-> quarantined and deleted successfully.
  C:\Documents and Data\Microsoft\Windows\shell.exe Data (Trojan.Shell)-> quarantined and deleted successfully.

  What can I do about it.  I have windows XP, I got this HP pavilion 555e computer 6 years.  I'm still working, but I don't like the error messages.  Please let me know also where I can learn more about the errors of registry and files.

  try to click on start > run > msconfig

  then under the Startup tab, you will find entries that refer to the programs that are set to start automatically when windows starts.

  You can probably find one of the references corresponding to this faulty .exe and you can turn it off.

  by disabling, attempt to launch the inoculated program will stop and the error warning should also.

  DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >

• My PC startup error message: c:\Users\Administrator\AppDate\Local\TBHostSupport\TBHostsupport_0.dll

  How can I fix the error message I get when I start my PC

  'error loading '.

  c:\Users\Administrator\AppDate\Local\TBHostSupport\TBHostsupport_0.dll

  The specific module could not be found.

  We should perhaps consider the possibility of Malware, see:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/error-message-after-startup/98b75892-96ab-4DC4-8920-79c328fd615a

• Speech recognition at startup error message

  An error occurs quickly in speech recognition at the beginning of loading up to

  Hi jrztrk,

  1. What is the error message that you receive?

  2. did you of recent changes on the computer?

  If speech recognition starts at startup and you want to turn off, try the following steps:

  (a) open the Control Panel in the classic view by clicking on the classic view in the left column of the control panel.

  (b) open speech recognition Options.

  (c) click Advanced speech Options in the left sidebar.

  (d) check run speech recognition at startup if you want to start with WindowsOr uncheck it if you don't want speech recognition to launch at Windows startup.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• startup error message: printer card transfer moniter has stopped working

  Thank you for your help.  I said that Microsoft will try to solve the problem... but the error message continues appeaering.

  Hi SIDDTHEEKIDD,

  1 when was the last time it was working fine?
  2 are you facing problems with the printer on the computer?

  It is possible that some third-party programs installed on the computer are causing the error at startup.
  I suggest that you perform the clean boot procedure and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start, type msconfig in the search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. on the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Smartphones BlackBerry Curve 9220 - ERROR - afret 7.1 update latest OS

  The OS current Smartphone blackBerry 9220 installed is 7.1 Bundle 1137 (v7.1.0.337, platform 9.50.0.28).  I wanted to update through Blackberry Desktop Software the last beam 7.1 2102 (the version I think is v7.1.0746) (not sure if this correct). After that, my smarthone displays "ERROR 507",

  Then again, I'm getting off 7.1 Bundle 1137, my phone works again...

  I tried again to be updated for the latest OS (the one who recommends the Desktop Manager), after long hours of waiting, my phone ERROR 102 poster... then I downgrade again to the lower version, which is 7.1 Bundle 1137, PLEASE HELP me HOW AM I going TO update MY OS to THE LATEST VERSION OF 7.1 BUNDLE 2102...

  Error 507 means that the device doesn't detect any operating system installed on the device.

  See the link below to download it and follow these simple instructions.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  VIA | JSanders

  http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/error-507-reload-software/m-p/1477...

• BlackBerry Smartphones BlackBerry Bold 9700 error 507

  I was updating my blackberry put new software on it and while it was going on my computer stopped mac and the 507 error came to my phone. I tried reaconecting of blackberry desktop software to repair. but as he begins to repair it not to do it, he says that he can't do. I need help ASAP please

  Hi Shawn_virk

  Welcome to the Forums of the BlackBerry Support

  Error 507 means that there is no OS on your device, follow this Knowledge Base to load the software on your device:

   KB19915 : perform a clean reload of software applications smartphone BlackBerry using BlackBerry Desktop Software on a Mac computer.

• Smartphone blackBerry, that an error has occurred please try again later

  I have a problem with my bb app world. I get an error message evertime I try to log in, my time zone is correct, deleted and reinstalled and rebooted several times now without a bit of luck. Is there another solution to this?

  Please help.

  Hello

  You can get the information you need:

  1. Go here: http://supportforums.blackberry.com/t5/BlackBerry-App-World-General/bd-p/appworld
  2. top of the list, subject gray are launched
  3. Among the floating topics, one is named "an error has occurred. Please try again ".
  4. Read this topic