Smartphones blackBerry "BOLD" BDM V4.6, WINDOWS VISTA AND CONNECTION to the local network AND SCHEDULE

Similar Questions

• Windows Vista not connect to the wireless network

  I read several answers to this question on the forum already, but none of the solutions with the fitting to my problem.  We live in formerly frequent power cuts, so our router resets a lot when the power comes back on.    I am able to connect to the internet through the connection, but my roommate is unable to connect, even if the connection is displayed on its networks wireless in range.  We tried resecuring the router, change security settings, connected the laptop to the router directly and changed the settings on it, all to nothing does not.  At some point tonight, I was able to connect her laptop to the network.  For the first time, Vista has offered an option "Connect to the network unsecured in any case" option, but he has not appeared since.  Any help on that would be great.  Thank you in advance!

  The surges of power could have damaged the router.  I recommend plug an uninterrupted power supply to protect them and keep them running for a period of time when the failure of your computer and the router. Boulder computer Maven
  Most Microsoft Valuable Professional

• How can I disconnect from the internet but to maintain my connection to the local network in Windows 7?

  I need to disconnect internet to my PC Windows 7 while maintaining my LAN network. Can anyone help?

  Hello

  If you want to disconnect Internet on the Windows 7 computer, then you can follow the steps mentioned below. These steps would help you to disconnect from the wired connection, while the connection is still active.

  (a) click Start.

  (b) type network and sharing Center in the start search bar and press ENTER.

  (c) in the left pane, click on change adapter settings

  (d) it would be to open a window with the connection to the wired LAN.

  (e) now, right click on the wired LAN connection icon and select Disable. (Provide the password if necessary).

  (f) it would disconnect the computer from Windows 7 to connect to the local network.

• Why if a system is xp and one system is windows 7 and the two connected to the local network, but file-sharing does not work

  a system is xp, another system is windows 7 basic and both connected to the local network, after you set up shared drive, mowing arrives not

  Hi Abhay,

  I suggest disable you the password protected sharing and check if it helps.

  Networking of computers running different versions of Windows

  Note: Follow the steps in the section "to enable sharing protected by password in Windows 7" and turn off password protected sharing.

• Connection to the local network not appearing is not in the area of notification on the Windows 7 computer.

  Connection to the local network not appearing is not in the area of notification on the Windows 7 computer.

  Right-click on the taskbar and select Properties, and then click Customize.  Look for the connection and modify to display the icon and notifications.

• Wireless connectivity problems: Windows Vista displays connected to the internet with good signal, but cannot access the internet more than a few seconds.

  Hello

  Recently, I brought a Dell with Windows Vista and a Belkin Wireless adapter in my house somewhere else. The computer has never had problems connecting to wireless internet on the other networks, however since the move I was not able to access the internet. Sometimes the network shows only a local connection and not Internet and other times, the network has a strong signal, a network identified and even an internet connection, but when I open any browser, it is only able to load the Google homepage and I cannot navigate anywhere else. I turned off all firewalls and even uninstalled all 3rd party software protection. I checked all my browser settings and made sure they detect automatically the IP settings and proxy settings. In other words everything seems in good shape, but I still have no navigation capability. Any ideas?

  It turns out that I had to remove all the old Wireless USB software that had been used previously (there had been other versions of Belkin and Linksys). I then used the computer from my friend to download suitable driver on the Belkin site for the internet adapter USB I used and BAM.

• BlackBerry Smartphones Blackberry Bold 9700 won't turn on and keeps restarting!

  I only got my Blackberry "BOLD" for about 2 months. The camera was a little funny and don't zoom so I turned my phone off and took out the battery and succeeded him in an attempt to restart the phone. Now, it won't turn!

  When the battery is in the light of the red LED at the top right corner turns on then turns off when the phone starts showing the BLACKBERRY Logo on the screen with the loading bar under. The bar then shows it to load, but almost immediately, it freezes and turns off. She does several times, but I tried to remove and replace the battery several times.

  I'm sure that this is not a problem with the battery, I had only he alleged the night previous and even tried using another battery of my friends BlackBerry to check, but the continuous phone to turn on several occasions, crash, turn off.

  Anyone have a similar problem or know a solution? Thank you!

  Hey guys!

  I managed to fix my blackberry!

  The best and probably the only solution for a blackberry caught in a never-ending cycle of reset / or always show error messages is to perform a "Clean Reload of your Blackberry Device Software"!

  I found 2 websites more useful!

  This site is by Blackberry from Research in Motion themselves who teaches you how to perform a clean reload. It requires for you to have your cable USB Blackberry and Blackberry Manager installed on your computer. There is a clear process of no to no! However, there are some which confused me at first so just to clarify... in step 4 where they ask allows you to check that you don't have the latest version of the software installed... If your software device tab is empty as indicated in step 3, this means that you currently no. SOFTWARE INSTALLED and so should follow the link indicated in step 4 (or pasted below) to download (and install) the latest software for your blackberry phone model and service provider before performing a cleaning charge.

  For a clean reload:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB11320

  To download the latest version of the device software:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB12532

  NOTE: When you do a clean refill, you can see that the Blackberry Manager to first show your blackberry as "disconnected." If the Manager continues to install/reload the software for device on your blackberry with no complications, I wouldn't worry too much about not because once the own recharge is over and your device will restart the Blackberry Manager would show so your device as "connected."

  ------------------------------------------------------------------------------------------------------------------------------------------

  The second site (unofficial Blackberry Forum) basically explains / uses the same process but it is a little outdated and I found some differences in the Blackberry Manager software they use and some steps may no longer apply. However, it should be that if you find you have difficulty getting your BlackBerry connected to your Office Manager as constant rebooting CAN cause the device to connect and disconnect continuously, this site can be useful for more of this problem. I personally don't have this problem if I had expected, which can be a result of the latest models of Blackberry devices and software device etc.

  For more of the constant connecting and disconnecting your BlackBerry since the Blackberry Desktop Manager:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Hope this helps!  x

• Smartphones blackBerry Bold 9900 of 24 October 2011 - loose Contact to the USB Port

  Hello

  I have a little problem with my Blackberry bold 9900 because that whenever I have it plug handle shipping severla seconds or minutes and then suddenly stops because the micro usb port is loose or worn out, now here is my question, does this fall under the warranty or is - a sort of: these things happen It's your own fault, thing?

  Welcome them
  Rumo12556

  Hello

  Rumo12556 wrote:

  But if it is covered by the warranty / guarantee!

  As a community of users, nobody here can answer your question with any level of authority whatsoever. So, the path of your inquiry is here, in these forums. On the contrary, it is through your service provider warranty - which will be either your place of origin of the purchase, your mobile service provider, or a... authorized service center that varies by region, but when you bought your BB, you would have been provided with documents about the exact terms and methods of use of your warranty. Contractually, that's the only place that can answer your question with authority.

  It is also perhaps a few good reading here:

  • http://us.BlackBerry.com/legal/handheld-limited-warranty.html

  Good luck!

• Windows Vista computer connects to the internet, but not ping to auto DHCP name

  Trying to get my Vista machine to have the file and printer sharing, I can see attached machines, and they can see the Vista machine, but does not connect to the computer.  The Vista machine will not see public folders with error code: 0 x 80070035 the network path was not found.

  Ping the DHCP name provides:

  Main2 ping [fe80::12:f74:b94e:94fb 8%] of 8% with 32 fe80::12:f74:b94e:94fb
  YTES of data:
  General failure.
  General failure.
  General failure.
  General failure.

  Ping statistics for fe80::12:f74:b94e:94fb 8%:
  Packets: Sent = 4, received = 0, lost = 4 (100% loss),

  Ipconfig/all

  Windows IP configuration

  Name of the host...: Main2
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Belkin Wireless G Desktop Card
  Physical address.... : 00-11-50-D6-32-97
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e497:9802:e6a6:40ce % 10 (Preferred)
  IPv4 address: 192.168.2.7 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Tuesday, October 21, 2008 23:06:50
  End of the lease...: Thursday, October 23, 2008 11:06:50
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e50:12:f74:b94e:94fb (area
  ED)
  Address IPv6 local link...: fe80::12:f74:b94e:94fb %8 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {E71A931D-A587-49DD-BF49-209236344
  523}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Any help?

  
  

• Windows vista-internet connection is only local. Worked fine until Vista has been reloaded.

  Internet connection is only local. Worked fine until Vista has been reloaded.

  Choose the manufacturer of your computer in the list and get them from there.

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

  ASUS:

  http://www.ASUS.com/support

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

• Loading Windows Mail, I get a dial-up connection box. I am unable to change it to use my connection to the local network.

  original title: windows mail locks

  Loading windows messaging, I get a dial to the top of the connection box, when I go into properties, connections, accounts, the software locks so I can't change it to the connection of LAN so not e-mail. There is no dial-up access on this computer.

  Remove your e-mail account.  Then compact and repair the database (see www.oehelp.com/WMUtil/).  Then add your account to mail back again and see if its fixed.  Also pay attention to the problems of antivirus in WinMail: see www.oehelp.com/OETips.aspx#3

  Steve

• I have a Vista Enterprise desktop connected to the local network, but the notification icon still shows disconnected state

  I have my Vista connected to the network and the "network and sharing Center" shows that it is connected and network is accessible, but the network in the status bar icon displays an icon showing disconnected state. How to solve this problem? Restart does not help

  Guru

  Check and make sure you have these services defined in this way. This initiative will establish whether there is a connection.

  1 - on the road - network Manual connections
  2 network list Service - auto-
  3 network Location Awareness - road - automatic
  4. bad Service Network Interface - on the road - automatic

• Flea market Vista laptop connects to the wireless network

  Hello

  I just got a computer mobile opportunity and I can't connect to our net at all. We have another laptop and a PC that both executed 7 that connect to it no problem at all. It is very strange that the laptop works perfectly, displays the connection, but point blank refuses to connect! I wonder if it is because it is not password protected? (I know, I know, but the PC does connect to him otherwise, that's weird). Any help is most appreciated!

  Hello

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Smartphones blackBerry Bold 9900 Urgent need help, is unusable after reinserting the Sim.

  I changed the sim card in my 9900 to try to find a number that was on a different band sim card, I reinserted my other sim card and now I can't access my phone. I am prompted with a login ID blackberry screen, it does not accept any password I give him it won't be aallow change me my password. After restarting a few times I am now in my phone but can not send messages or anything, at the top of the screen it says "Insert SIM card" when the sim card is already in it. Please help :/

  It works finally, close topic pleasee ():

• BlackBerry Smartphones Blackberry "BOLD" will not be under tension and will remain

  Hello everyone. I really hope I can get help here. I turned off my phone yesterday and took out the battery. When I tried to return based on everything I have has a white screen and 'working' Center icon w / the little hand that turns. Nothing never loads on the screen then the phone turns off and the Red led on top lights for a few seconds. After that the whole thing again. Help!

  I hope that you have a backup of the device?

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe