Loading Windows Mail, I get a dial-up connection box. I am unable to change it to use my connection to the local network.

Similar Questions

• Why if a system is xp and one system is windows 7 and the two connected to the local network, but file-sharing does not work

  a system is xp, another system is windows 7 basic and both connected to the local network, after you set up shared drive, mowing arrives not

  Hi Abhay,

  I suggest disable you the password protected sharing and check if it helps.

  Networking of computers running different versions of Windows

  Note: Follow the steps in the section "to enable sharing protected by password in Windows 7" and turn off password protected sharing.

• cannot connect to the local network using windows 7

  Recently bought a HP Pavilion laptop (AMD Athlon II P320 Dual - Core) ((G62 - 208CA)). Having a problem connecting to the local network. I have flashing lights on the lan (orange and white) connector.

  Using the ipconfig command, I get an IP address, subnet mask and gateway by default however messages below will appear:

  Tunnel adapter isatap. <578608BD-22EF-4A01-90ED-D709CB81D027>:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel connection to the Local network adapter * 9:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel adapter isatap. :

  State media: media disconnected

  The connection-specific DNS suffix. :

  TEREDO TUNNELING Pseudo-Interface tunnel adapter:

  State media: media disconnected

  The connection-specific DNS suffix. :

  Tunnel adapter isatap. our field: *

  State media: media disconnected

  The connection-specific DNS suffix. :

  I tried to turn off the firewall and connect without success

  My network card is a Realtek PCIe FE Family Controller and confirmed that the drivers are up to date

  Any help would be appreciated

  Thank you

  Well Yes! So it was an older version of the bonjour service... thank you Adobe.

  You can find the latest version here:

  http://support.Apple.com/kb/DL999

• Connection to the local network not appearing is not in the area of notification on the Windows 7 computer.

  Connection to the local network not appearing is not in the area of notification on the Windows 7 computer.

  Right-click on the taskbar and select Properties, and then click Customize.  Look for the connection and modify to display the icon and notifications.

• How can I disconnect from the internet but to maintain my connection to the local network in Windows 7?

  I need to disconnect internet to my PC Windows 7 while maintaining my LAN network. Can anyone help?

  Hello

  If you want to disconnect Internet on the Windows 7 computer, then you can follow the steps mentioned below. These steps would help you to disconnect from the wired connection, while the connection is still active.

  (a) click Start.

  (b) type network and sharing Center in the start search bar and press ENTER.

  (c) in the left pane, click on change adapter settings

  (d) it would be to open a window with the connection to the wired LAN.

  (e) now, right click on the wired LAN connection icon and select Disable. (Provide the password if necessary).

  (f) it would disconnect the computer from Windows 7 to connect to the local network.

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• fill a dial with a connection to the local network

  I wanted to share my internet with my itouch but I can not, I was using a verizon 3g wireless device but my phone treats it as a dial-up modem... so it wont let me fill my connection with "connecting to LAN".

  Hello

  In general, Dial-Up connection can be shared.

  Some 3G connections except do not let. You must search for and discover if your sallow configuration for sharing.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Windows xp connected by connection to the local network at 100 Mbps and yet still get ccontinuosly disconnected servers of games... suggestions?

  See above

  This can happen if the servers are overloaded / can not handle the number of people on it

  It's on your network 100 Mbit/s does not mean that that's what you're connected to the Internet.

• is it possible to get drivers on the hp sites, I need the driver to get online to connect to the local network.

  I don't know that I don't have after that I reinstalled xp professional. I cannot now online because of this. thanksI need to get local area connection driver I was told by verizon tech net.  where I can get it on CD. Thank you

  Hello

  These should contribute.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

• Is it a bad idea to use ICS on a Windows 98 computer for a Vista laptop to connect to the local network?

  I recently added another computer on my network that moved the connection cable free use to connect my laptop. Unfortunately, I don't have a 4 port switch. I have an old PCI 10/100 Ethernet card available from a dead computer, but the only machine that has slot machines and pilots is my Windows 98SE print server. My modern system uses PCI - X, and there are not any drivers Mac OS 8.6 for the card.

  Wouldn't be a good idea to turn on Internet connection sharing on this old Win98SE machine so that I connect my laptop on the network through ICS? I use the laptop at home very often except to transfer files to the desktop and 3/4 of the time that I use a flash drive.

  My network is behind a hardware firewall of a Linksys BEFSR41 cable/DSL router/switch.

  I heard about the security issues with Win98 and all that, are there additional risk with ICS?

  Oh, and no, I don't have a wireless access point. I recently acquired the laptop and don't really need at home.

  Win98SE ICS can be unreliable, but I don't think it poses a security risk for the laptop that connects to it.

  Browsing the Internet on the Win98SE computer itself can be risky, because there has been no update security for Win98SE in a long time, and it is difficult to find an antivirus program that runs on Win98SE.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Smartphones blackBerry "BOLD" BDM V4.6, WINDOWS VISTA AND CONNECTION to the local network AND SCHEDULE

  THE BDM CONTINUES ON THE FENCE WITHOUT SPECIFIC ERROR. Windows closes the application in the middle of sync if I'm not here to keep the computer crashes due to no use. Who created duplication in Schedule BB of almost all my appointments, but has not corrupted the file Outlook 2007 (which I have another perfect copy). Also, I removed the modem added with the BB because it created a conflict (I think). So, questions:

  (1) how can I empty the calendar with the BB (remove all entries)

  (2) having someone has seen this before?

  (3) should I do something else or reinstall something in order to solve the problems?

  TKS,

  PvM

  Hello

  You probably have a damaged in the BB calendar, fairly common entrance with the BB and Outlook:

  Generally, I put the synchronization to make me accept rejection conflicts and adds and deletes. In this way you

  You can keep this case to go away.

  Here is the schedule wipe:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04950&sliceId=SAL_Pub...

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

• CQ60-210US reformatted for Windows XP Prof, but it does not connect to the wireless network...

  Long story short, I tried recently to "downgrade" my husband computer CQ60-210US laptop from Vista to XP.  I followed the very detailed guide posted here and everything seems to work great but my computer does NOT connect to my home network.  It comes as an available network, but when I try to connect it goes on to say that the network is no longer available - is yet to ask security key.  I tried to click on the connection to a neighbor to see what would happen and it seems to go further (it asks me the security key).  I can connect directly using the ethernet to the modem cable.

  This laptop was initially working on my network wirelessly with Vista.  I use a CLEAR 4 G wireless modem.  The signal from the modem is good.

  Can anyone help me identify the problem and propose a solution?  Everything else seems to work well.

  Thank you very much!

  Try to uninstall the Atheros driver, you have now and install another:

  FTP://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52131.exe

• Windows 7 taking a long time to connect to the wireless network

  When I try to connect to the wireless network, it takes about a minute or two.  I didn't have this problem until I updated my card wireless about a week ago.

  Thank you very much.  I think I solved the problem.  I didn't have this problem until I updated my card with the latest wireless.  But I uninstalled the new and re-installed version, and that seemed to solve the problem.

• Connection to the local network disabled in Windows 8

  Hi team,

  I disabled the Local area connection icon in 'control network and Internet\Network connections '. I thought that I can enable it immediately, but now the icon is not available in "network connections".

  

  For this reason, I couldn't create a WiFi hotspot in my laptop. The error message is attached below:

  

  I understand that it is because 'Local Area Connection 14' does not appear in 'my properties to Mobile Broadband' for sharing network.

  

  So, please guide me to activate/create the 'Local Area Connection 14"and help in the creation of WiFi hotspot.

  Kind regards

  Vasanth G M

  Hello Vasanth,

  Please keep us updated and my apologies for the late reply.

  I suggest you to refer to suggestions provided by AndyWihalim responded on July 13, 2013.

  Let us know the result.

• Is it possible I can get the virtual computer connectivity after restart to connect to the local network in the host operating system?

  Hi all

  For some reason, I have to disable and then enable the LAN connection in the host operating system. If some virtual machines are running during this time, connectivity all VMs for out-of-world are lost, they cannot connect to the host even more (by running the ping command). I tried a few methods to retrieve the connectivity, but all have failed, for example,

  1. reboot the virtual computer

  2. restart VMware Workstation

  3. restart the corresponding system services in the host operating system

  The only way I can retrieve all is to restart the host operating system itself.

  Yes, is there short any path, I can retrieve the connectivity of these virtual machines?

  Thanks in advance.

  Yark

  yarkwang wrote:

  I use a Broadcom NetLink (TM) Gigabit Ethernet NIC, shows the date of the pilot 2006-5-15, but it works well, I think.

  Try installing a newer driver.  According to the site, you should be able to find a driver dated 2008 or 2007 (depending on which exact model of NetLink card you have):

  - http://www.broadcom.com/support/ethernet_nic/downloaddrivers.php

  1 came out of safe guard 360

  Sometimes out of some firewall programs is not enough (they keep still themselves installed in the network of the host stack, even if they are 'closed').  You may need to uninstall to make sure that it is not interfere.  (Search the forums for support for your firewall software see if anyone else is having problems with vmware and 360 safe guard).