Smartphones Foursquares blackBerry application not supported for COMPUTER policy

Similar Questions

• so I paid for a subscription to the photo shop, but then he says that he will not support my computer? now what?

  so I paid for a subscription to the photo shop, but then he says that he will not support my computer? now what?

  Check https://helpx.adobe.com/photoshop/system-requirements.html

• System recovery disks do not support this computer

  Two weeks ago, crashed my HP Pavilion Elite HPE - 480 t hard drive model.  It is a 1.5 TB came with the PC.  I bought a WD 1 TB hard drive and installed.  When I used my recovery discs, I received a message, "the system recovery disks do not support this computer.  You are not able to restore this system with these discs. "Because I had never used these recovery discs, I assumed I had their damn so I bought authentic system recovery disks from HP.  Yesterday them - even received training as before.  I called HP tech support and I was told that those recovery disk works with a hard drive that is identical with the original hard drive.  Located between the two hard drives that the original HD had a 3 GB/s, and the new is 6 Gbps.  Is this correct?  They "graciously" offered replacing my new hard drive with a hard drive that works for only $180.  Seems a little steep, but I am confused.  Is system of technical recovery disks?  I would like another opinion.  If buying a new motherboard out me of this?  If someone knows a resolution to my situation, I would be very grateful.  Help!

  Hello

  In fact, you have more options that will avoid spending more in $$. The first thing I would try is the utility that provides HP. It is used for when the set of recovery disks does not work with a new hard drive. Follow the instructions of this web document.

  View your results. If the results are negative, we can install the operating system on your new hard drive with another method.

  What is the WD SATA drive model you purchased?

  Erico-

• Hard drive replacement, windows support, media does not support this computer?

  Laptop HP G72 M #-C55DX, I replaced my hard drive with the same OEM, 4 recovery disks made when I bought the laptop new, replaced the hard drive, run startup test, memory and hard drive OK, insert #1 recovery disk, windows loads, then get the system recovery media does not support this computer. you are not able to restore the system with the media. I have windows 7 Premium I don't know what to do next. Thanks for the help. Frank

  My recovery disks that I had at the beginning are bad. Has bought the HP boot disks. up & running, thanks Frank

• Lodge B5S08UA: {Thae system recovery media don't dose not support this computer

  After I bought it, I created the back upward on ((recovery media)) the DVD before doing anything. Now I have and I want to install it to the PC ((HP Pavilion M6-1045dx))

  can someone help me?

  Thae system recovery media dose not support this computer, you are not able restor this system with the media

  Hi @ako89kurdish,

  Thank you for posting. I read your post, and I understand that you have received the message "system recovery media does not support this computer."

  Error message in Windows 7 HP system recovery: "the system recovery disks do not support this computer."

  One of the following errors open when you try to use recovery disks:

• How to fix error: "application not found" for C:\Windows\system32\rundll32.exe _

  I had the virus ' Vista Internet Security 2010 "deleted using McAfee, but now I can't start my programs and browsers because I see the error:"application not found"for C:\Windows\system32\rundll32.exe" ".
  How can I fix this problem? I use Vista SP2

  Your computer is still infected. Only McAfee will take care about that. First run .exe from Doug Knox fix:

  http://www.dougknox.com/XP/file_assoc.htm

  Then follow the instructions here:

  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010 MS - MVP - Elephant Boy computers - don't panic!

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Note support for 12.1.3

  ALL INSA

  EBS R12.1.3

  RHEL5

  I can't find the matching note support for R12.1.3

  I found only 12.0 and 12.2 as in:

  Installation of Oracle Applications and Notes of version 12 (12.0.4) for Linux (64-bit) upgrade (Doc - ID 416305.1)

  Oracle eBusiness Suite Installation and upgrade of exit 12 (12.2) Notes for Linux x 86-64 (Doc ID 1330701.1()

  
  

  
  

  
  

  Help, please...

  Thank you

  JC

  
  

  Here it is!

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Linux x 86-64 (Doc ID 761566.1)

  Kind regards

  Bashar

• Firefox mobile not supported for lg optimus zip

  Hello, I have recently switched to straight talk and was sad to find that firefox mobile is not supported for the lg optimus zip. In the future, I hope that this will change.

  Hello moon_serenity, firefox does not work on your device because it has to little memory RAM (150 MB instead of the 384 needed for firefox to run). in the past there has been efforts to make firefox on android race on more than low-end devices, but the 384 seem to be the background limit which was concluded in which is possible to achieve. If I am afraid that there will be no way to make firefox run on the lg optimus zip.

  https://www.Mozilla.org/Firefox/mobile/platforms/

• Your browser is not supported for this program. This program is expected to be launched above IE4 version!

  The provider's Web site will not reflect orders/quotes...
  We get this message
  "Your browser is not supported for this program.
  This program is expected to be launched above IE4 version! »

  URL of affected sites

  http://

  To work around this problem, you can also try using the User Agent Switcher add-on to give the impression that you are using IE on the site.

  You can contact the site owner to inform them of their poor support for Firefox.

  Alternatively, you can report a broken help site.

• LabVIEW does not support for NI-DAQmx.

  Hello fellow programmers.

  I am an absolute beginner with LabVIEW and I have the problem that even if I installed the latest versions of the NOR-DAQmx (9.7.5) driver and LabVIEW (2013) I get the error message "LabVIEW does not support for NOR-DAQmx. Please reinstall.

  I created a task in the NOT-MAX. According to the tutorial now there should be an element in LabVIEW under "Measure i/o", but it is not. I carried the task via drag & drop in the block diagram, but when I want to turn in code, I get the above message.

  Operating system: Windows XP SP3

  Any suggestions?

  Thanks in advance

  Laura

  crossrulz,

  Thank you for your response. Well, I installed the latest version of NOR-DAQmx (9.8) and this time I also installed packages for the former executives etc and now it works.

• HP ENVY PHOENIX 800-030qe: the system recovery media does not support this computer

  Hello!

  I can't recover to factory settings using recovery media (4 DVD) after changing HD (the previous device has crashed/broken).  The message is: "the media recovey system does not support this computer. You are not able to restore this system with this media. »

  So, what should I do?

  Thank you very much.

  Luiz Borges

  Upgrade the BIOS/downgrade will not fix it unfortunately.

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• You try to create VHDX or another format not supported for this version of the server

  Hello

  I have a problem with vWorkSpace do not load VM and I really hope that someone here might be able to add comments. We run vWorkSpace v8.5 on a box of windows server 2012 and v6.1 Hyper-V on Windows Server 2008.

  After running then changing the main image, I've updated the image of our cloud. Once the update of the virtual machine would not load, giving the below error

  End of the action (create) (failed to create. CreateVM: Unable to create the virtual machine of provided information. : CreateVhdxDisk: try to create VHDX or other format not supported for this version of the server. Path to the virtual disk: .avhd - call stacks - to Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)
  at HypervLocalExecutor.HvCreateVM (string strUser, strPwd, VmCreateData createData, String strDomainNameIP, VmResult String & result)
  to CHyperVClone.doClone (basic_string<>\,std::allocator > * nsHostName, basic_string<>\,std::allocator > * nsUsername, basic_string<>\,std::allocator > * nsPasswd, VmDefData * vmData, basic_string<>\,std::allocator > * strDomainIPaddress, NewVmInfo * newVmInfo)-> Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP))...
  5 March 2015 15:54:15 - 1392:8580511090155201372 - caught error: Stack Trace and stack Exception below:
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)

  We believe that it is somehow to do with Hyper-V under Windows 2008 and vWorkSpace running on Windows 2012 - the VHDX format is not supported by the version of Hyper-V server. A glance online confirms this. So my question is, how update the master image changed the format VHD vWorkSpace wants to use and is there a way to assign vWorkSpace don't know this format?

  I have widely in search of a solution to this line and not found anything it either, nor there seems a clear way in the vWorkSpace console to change that.

  Thank you

  Hello

  I suspect that you have created a snapshot on your model.  It is not supported, if you delete the snapshot so that the .avhd is merged to the vhd/vhdx and update the model in vWorkspace again.  If this does not work, you will need to delete the model of vWorkspace and then re-import.

  Concerning

  Paul

• Printer drivers HP LaserJet M1005 MFP not supported for Windows 8

  Dear support,

  I use the printer HP LaserJet M1005 MFP range, but the drivers are not supported for Windows 8.

  Pls can update you with the new drivers of windows 8, which his slove my problem.

  Thanks in advance

  Concerning

  Vermorel

  Hi Majusko,

  If the Windows 7 installs on 8 to win, you must wait for the pilot to Win 8 to be released. Basic/Host-based driver available February 2013

  HP LaserJet and Color LaserJet - Windows 8 media

  HP trade-in program