SmartWatch 2 call management applications

Similar Questions

• Can I migrate a virtual computer to a new family of CPU? -Cisco Call Manager PUB/SUB

  I currently have 2 host VMware ESXi 4.1:

  1. Dell PER905 - running 16 x 2.39 GHz (core) CPU / Quad-Core AMD Opteron (tm) Processor 8378 (processor type)

  2 cisco UCS C260 M2 (BASE-2646) - running 20 x 2,393 GHz (core) CPU / Intel (R) Xeon (R) CPU E72870 (processor type)

  
  

  The main objective is to move 2 VM of the Dell host to the host of Cisco, the reason is because Cisco Support said that the virtual machine requires an Intel and not AMD they are currently.  I currently have a Publisher Cisco Call Manager and Call Manager subscriber residing on the host of Dell, they are constructed (non - OVF) on this machine some time ago.  We started to have problems with them and ultimately Cisco indicated above.

  
  

  A few questions come to mind, can someone please shed some light on them for me?

  1. can I migrate these 2 AMD to Intel VM, without her damage/destruction of the virtual machine?  What that is the answer may be, can you explain to me the why?  The answer to the migration of the CPU is dependent on the guest OS or what?  I ask because I did this successfully on a Windows Guest OS virtual machine, but I guess it is that Cisco makes me hesitate/question.

  2 would it not be better to each virtual machine rebuilt on the new host, rather than through migration for the purposes of the CPU?

  3. What is the recommended method to endorse these VM, before proceeding with the migration?  I'm not talking about save data in the call manager for reasons that I will perform a backup it first.  I ask more along the lines of - for the love of the virtual machine itself.

  1. can I migrate these 2 AMD to Intel VM, without her damage/destruction of the virtual machine?  What that is the answer may be, can you explain to me the why?  The answer to the migration of the CPU is dependent on the guest OS or what?  I ask because I did this successfully on a Windows Guest OS virtual machine, but I guess it is that Cisco makes me hesitate/question.

  You should be able to perform a cold migration. The concern is the guest operating system level.  The Cisco device is probably a Linux distro.  The distribution must use the AMD64 instruction set (Intel 64 compatible) and theoretically should migrate fine.  However, if the guest what OS was improved the AMD CPU instructions, he can expect these features when you restart.  We have at least a virtual computer in our environment that we need to stick to a certain family of Intel processor because the software license dig and binds to it, but this is the only scenario that I have met.

  2 would it not be better to each virtual machine rebuilt on the new host, rather than through migration for the purposes of the CPU?

  I feel better on the redeployment, but if the migration is successful and applications run stable, then you reaped just the benefits of virtualization.

  3. What is the recommended method to endorse these VM, before proceeding with the migration?  I'm not talking about save data in the call manager for reasons that I will perform a backup it first.  I ask more along the lines of - for the love of the virtual machine itself.

  You could do something as simple as the cloning of a copy.  Depending on how you are approved for vSphere, you can have the POS to back up your virtual machine.  You can also use a tool such as VMWare Converter or Veeam Backup and replication. Given the importance of these virtual machines, I would get at least 2 backups of different type.  You should be able to validate any backup with VMWare Workstation prior to migration.

• An annoying pop up called Manager apps keep appearing, nothing to do with you?

  Using Win7 Pro and Firefox 20.0.1. Get an "App Manager" application from suggesting that I have download three things to let me download some sites including Twatter.
  I did not want to use the apps, but cannot fing anything in professing be administrator of the App.
  Is there something in Firefox or Windows?
  To get rid of any help would be much appreciated

  Cracked. For later use, it comes with the updated for the LG Scanner Mouse driver. Remove the driver, need to find an original disc to reload, but, Hey, the gene is missing. Thank you much for your concerns

• What is the best way to manage applications so that they do not fill a space of memory?

  I have an iPad Air Os9, 64 g

  However, I am already up to 39 g mem.

  What is the best way to manage applications if tat I can use them, but no pork then my mem space?

  y at - it an app that manages the apps?  should I delete and re-download a few apps later?

  I would like to take advantage of many more applications that I believe I have space for.

  You can see how much storage resumes via the settings app > general > Manage Storage - this screen lists each app space (the application and its content), total by selecting an app on this screen should tell you how much space the application content (files, documents, etc.) resumes.

  y at - it an app that manages the apps?

  No, iOS is a sandbox environment, apps can control or manage other applications.

  should I delete and re-download a few apps later?

  Depends on the app. deletion of an app will also delete its content, if it is an application where its content is important (such as documents), and that content is not stored elsewhere (e.g.)  Dropbox or cloud server), you may lose this content by deleting the app.

• How can I locate and manage my files?  I downloaded a file manager application, but I can not understand how to get my pad, s files appears.

  I have an OS9-iPad 9.3.1-, mem 64g

  I'm used to be able to locate my files, that are currently using the command or modify.

  However, I can't do in the iPad.

  I downloaded a few applications Manager file, thinking that one of them would be

  help me to locate and manage my files, but none of them can locate files on my iPad.

  I have files PDF and Kindle, for example - but I can not only locate raise them in some readers.

  However... Can I use a file manager application to show me my files and allows me to use or modify them?

  I have to do everything on your laptop, then download in my pad?

  .. can where I get an application to the list of my files for me?

  Apple has blocked 'file manager apps' access directly at the beginning of iOS with iOS 8.3 file system.

  The only way that some files are accessible through these types of applications is if the files are marked for sharing files (accessible via iTunes on Mac/PC) by the developer of the app. Actually, you don't need a ' file manager app "since the sharing of files in iTunes already allows to access files directly via iTunes in the first place.

• Aspire 5738 PowerSmart Manager Application 4.05.3004. Stop at the outlet disconnnect.

  Hello

  The Aspire 5738 runs on Windows 7, 64-bit.  She used to heat and stop every few minutes.  Installed PowerSmart Manager Application 4.05.3004.  The issue of closing itself is resolved, but now the laptop stops immediately when you are disconnected from the power source.

  Any help is appreciated.  Thank you!

  Hello. Could you confirm that the laptop stops down immediately if the card is removed? If you uninstall the intelligent application of power? If it closes at the bottom with and without smart power requires it could be a hardware issue. If the device does not stop with the intelligent application of power it's a software problem. Check if the device has any BIOS update or fixes. Thank you.

• intelligent call management bug

  Hi sony support

  Intelligent call management is great, but there are a few bugs

  first: the jerk of the function call requires more sensitivity

  Second: bring the phone to your ear function needs to be improved because it works during calls! for example if you are in a call and someone called you the phone picking up just because it's close to your ear, put the first call you were waiting. (phone captures second call and put the first call on hold)

  Anyone who agrees... .write a comment

  MWM says:

  @SajjanXperia

  uliwooly

  I think you misspoke... I don't want the phone to answer calls while I'm already have one!

  You can turn off your call waiting in the additional settings, and your company should be able to disable, or you - if you have a control panel to the user through the administration of the carrier's Web site

  There is also a second option

  You can configure forwarding functions when "the number is busy' to your voicemail or another number if you need.

  Settings > device

  Call > other call settings
  Call forwading & additional parameters.

  Two of them are options at the end of the page

• Can we disable flashing logo popup in the Dell Display Manager Application?

  He is very bored. Can we disable Dell flashes popup Manager Application Display Dell logo?

  

  

  While holding the SHIFT key, right-click on the MDD system tray icon and uncheck the box "Notifications on the screen" menu drop-down...

• Call native applications

  Does anyone know how we can call native applications such as the browser, email client or AppWorld? I've seen other applications invoke the browser and email, so I know it's possible, but I can't find anything in the documentation of the AIR.

  @Ebscer, there are likely several ways that work, which uses navigateToURL() with a 'plan' appropriate.

  Using of "file:", "http:", "https:" and possibly others should open the browser.

  I don't know if others have been documented yet. I've seen either "app:" or "appworld:" in the Simulator (down in the tree of /pps somewhere under "navigator") but I need to get my tablet before I can experiment more with this as the Simulator, of course, is almost useless for such things.

  There are also several other techniques mentioned at the beginning of this thread: http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/PDF-word-and-xls-support-in-playb...

• Phone to the Call Manager express license

  Dear,

  Is the license of phone required for Call manager express or the license on the bridge of voice enough to operate the phones?

  Kind regards

  A device license is required for phones on CME. Reference numbers

  FL-CME-SRST-5 =.

  FL-CME-SRST-25 =.

  FL-CME-SRST-100 =.

  Aerts.

• Review installed licenses V4.3 cisco call manager

  Hello!

  I have and old cisco call manager V4.3 and I need to review with the licences it has installed, did someone knows how can I get this information from this version? I checked under license of the system, but nothing is there.

  Thanks in advance!

  Kind regards

  There are no licenses installed on versions of windows, you can not get any info from the server. You should review the licenses of the size of the paper.

  Sent by Cisco Support technique iPad App

• Strange problem with call manager and call before all

  Not sure whether this post about unity for or CCM. I will post on both. I have a main number customers dial in. When they call this number and they do not get a response, it passes to a call handler. This call handler has an option of entry of the appellant 3. If they hit option is three transfers to an IP phone on Call Manager who is assigned to the CFA for this cell phone to people. Everything works except when the call is sent to the PSTN it sounds for time and then disconnects. This number can be called directly from the system with no problem. The cause of the disconnection on debugging is the following: because I = 0x80FF - error of interconnection of networks; not specified. Please help if you can.

  I assume you are using version transfers here. You can give it a whirl with supervised transfers?

• Replacement of VG224 in Cisco Unified Call Manager (CUCM)

  Hello

  I'm about to replace some of the access points virtual (VG224) to one of my sites and have a few concerns:

  1. Copy configs of the old to the new VG224 will be sufficient?
  2. What needs to be done on the Cisco Unified Call Manager (CUCM) to complete the replacement VG224?
  3. Should I change the configs in Cisco Unified Call Manager if I change the IP address of the VG224 (VG224 migration to the new voice VLAN)?

  Thank you

  Yahya,

  Hope it goes well...

  V is standing for VOICE, not virtual. Vg224 is gateway224 of voice. The answers for your quastion will be...

  1 - Yes, it is sufficient.

  2 - CUCM administration page > device > gateway > find. Select your gateway, change the mac address (10 digits) of the old appliance with a new one.

  3. with the help of sccp Protocol, CUCM don't care about ip address, it's care only about mac address. If the answer is, NO.

  hope that could help

  Concerning

• HWIC-AP more Call Manager Express?

  It took me some time and many transfers of tftp to finally find an IOS which works very well with the HWIC-AP (wireless access point module) for a router in 2801.

  What I was asking: is there an IOS which supports both HWIC-AP and also includes the Call Manager Express (CME)?

  What feautures would you find using the IOS search engine?)

  Thanks for all the ideas.

  Marc

  Use the IOS 12.4 (2) T1 or later to support the CME and HWIC-AP

• Issue of call manager

  We have a Manager call we use for AA to provide wishes and staff of mailbox access mailbox option and no DDI extension before you send us the receptionist (Call Manager driver Point to the monitoring console). Greeting for office hours and the other for off hours which takes messages.

  We had a request to remove greeting during the hours of office, so the rings call the pilot immediately Point, but always need wishes and message opting for hours.

  I have change the standard greeting of the current record to empty and the option after the salutation is to attempt to transfer to Pilot Point. This kind of work, but I get the system prompt to 'wait while I transfer your call', then a second or two from the Department of health before the Pilot Point rings.

  Any way I can stop the system prompt and the Ministry of health before the transfer so that the caller hears only ringtone? Here's how incoming call:

  RTC Via GW-> CTI Route Point-> Unit-> CM Point of pilot-> Attendant Console user

  TIA

  D

  Check out this thread for more information on how to replace the system with a white prompt we so used to hear you it any longer:

  http://forums.Cisco.com/eForum/servlet/NetProf?page=NetProf&type=bookmarks&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40.ee8253b/1#selected_message

  do not forget that it is not taken in charge of TAC, and the change will be deleted when you upgrade so you don't have to remember to reapply after.

  Not that you can do on the Department of HEALTH it - it is paid by the switch, not the unit.